summaryrefslogtreecommitdiff
path: root/arch/arm/mach-tegra/Makefile
AgeCommit message (Collapse)Author
2015-06-01ARM: v7 setup function should invalidate L1 cacheRussell King
All ARMv5 and older CPUs invalidate their caches in the early assembly setup function, prior to enabling the MMU. This is because the L1 cache should not contain any data relevant to the execution of the kernel at this point; all data should have been flushed out to memory. This requirement should also be true for ARMv6 and ARMv7 CPUs - indeed, these typically do not search their caches when caching is disabled (as it needs to be when the MMU is disabled) so this change should be safe. ARMv7 allows there to be CPUs which search their caches while caching is disabled, and it's permitted that the cache is uninitialised at boot; for these, the architecture reference manual requires that an implementation specific code sequence is used immediately after reset to ensure that the cache is placed into a sane state. Such functionality is definitely outside the remit of the Linux kernel, and must be done by the SoC's firmware before _any_ CPU gets to the Linux kernel. Changing the data cache clean+invalidate to a mere invalidate allows us to get rid of a lot of platform specific hacks around this issue for their secondary CPU bringup paths - some of which were buggy. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-17ARM: tegra: Convert PMC to a driverThierry Reding
This commit converts the PMC support code to a platform driver. Because the boot process needs to call into this driver very early, also set up a minimal environment via an early initcall. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17soc/tegra: fuse: move APB DMA into Tegra20 fuse driverPeter De Schrijver
The Tegra20 fuse driver is the only user of tegra_apb_readl_using_dma(). Therefore we can simply the code by incorporating the APB DMA handling into the driver directly. tegra_apb_writel_using_dma() is dropped because there are no users. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17soc/tegra: Add efuse driver for TegraPeter De Schrijver
Implement fuse driver for Tegra20, Tegra30, Tegra114 and Tegra124. This replaces functionality previously provided in arch/arm/mach-tegra, which is removed in this patch. While at it, move the only user of the global tegra_revision variable over to tegra_sku_info.revision and export tegra_fuse_readl() to allow drivers to read calibration fuses. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-02-25ARM: tegra: remove tegra EMC scaling driverStephen Warren
Nothing calls into the Tegra EMC (External Memory Controller) scaling driver any more, so it's dead code. Remove it. Cc: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-18ARM: tegra: add LP1 support code for Tegra124Joseph Lo
The LP1 suspend procedure is the same with Tegra30 and Tegra114. Just need to update the difference of the register address, then we can continue to share the code. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-18ARM: tegra: enable CPU idle for Tegra124Joseph Lo
The CPUIdle function of Tegra124 is identical to Tegra114, so we share the same driver with Tegra114. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-18ARM: tegra: CPU hotplug support for Tegra124Joseph Lo
The procedure of CPU hotplug for Tegra124 is same with Tegra114. We re-use the same function with it. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-17ARM: tegra: remove common.cStephen Warren
common.c was create to contain code shared across the various Tegra board files. There is now only one board file, tegra.c. So, move the code there. One exception is the PMC reboot routine, which moves to pmc.c, and now takes advantage of the 'standard' tegra_pmc_readl/writel functions. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-13PCI: tegra: Move PCIe driver to drivers/pci/hostThierry Reding
Move the PCIe driver from arch/arm/mach-tegra into the drivers/pci/host directory. The motivation is to collect various host controller drivers in the same location in order to facilitate refactoring. The Tegra PCIe driver has been largely rewritten, both in order to turn it into a proper platform driver and to add MSI (based on code by Krishna Kishore <kthota@nvidia.com>) as well as device tree support. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [swarren, split DT changes into a separate patch in another branch] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12ARM: tegra: add LP1 suspend support for Tegra114Joseph Lo
The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * storing some EMC registers, DPD (deep power down) status, clk source of mselect and SCLK burst policy * putting SDRAM into self-refresh * switching CPU to CLK_M (12MHz OSC) * tunning off PLLM, PLLP, PLLA, PLLC and PLLX * switching SCLK to CLK_S (32KHz OSC) * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, PLLA, PLLC and PLLX * restoring the clk source of mselect and SCLK burst policy * setting up CCLK burst policy to PLLX * restoring DPD status and some EMC registers * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Bo Yan <byan@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12ARM: tegra: add LP1 suspend support for Tegra20Joseph Lo
The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * putting SDRAM into self-refresh * storing some EMC registers and SCLK burst policy * switching CPU to CLK_M (12MHz OSC) * switching SCLK to CLK_S (32KHz OSC) * tunning off PLLM, PLLP and PLLC * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, and PLLC * restoring some EMC registers and SCLK burst policy * setting up CCLK burst policy to PLLP * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored, CCLK burst policy be set in PLLP. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Colin Cross <ccross@android.com> Gary King <gking@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12ARM: tegra: add LP1 suspend support for Tegra30Joseph Lo
The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * storing some EMC registers, DPD (deep power down) status, clk source of mselect and SCLK burst policy * putting SDRAM into self-refresh * switching CPU to CLK_M (12MHz OSC) * tunning off PLLM, PLLP, PLLA, PLLC and PLLX * switching SCLK to CLK_S (32KHz OSC) * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, PLLA, PLLC and PLLX * restoring the clk source of mselect and SCLK burst policy * setting up CCLK burst policy to PLLX * restoring DPD status and some EMC registers * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored, CCLK burst policy be set in PLLX. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-22ARM: tegra114: add CPU hotplug supportJoseph Lo
The Tegra114 is a quad cores SoC. Each core can be hotplugged including CPU0. The hotplug sequence can be controlled by setting event trigger in flow controller. Then the flow controller will take care all the power sequence that include CPU up and down. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-02Merge tag 'multiplatform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform updates from Olof Johansson: "More multiplatform enablement for ARM platforms. The ones converted in this branch are: - bcm2835 - cns3xxx - sirf - nomadik - msx - spear - tegra - ux500 We're getting close to having most of them converted! One of the larger platforms remaining is Samsung Exynos, and there are a bunch of supporting patches in this merge window for it. There was a patch in this branch to a early version of multiplatform conversion, but it ended up being reverted due to need of more bake time. The revert commit is part of the branch since it would have required rebasing multiple dependent branches and they were stable by then" * tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms clocksource: nomadik-mtu: fix up clocksource/timer Revert "ARM: exynos: enable multiplatform support" ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: exynos: enable multiplatform support rtc: s3c: make header file local mtd: onenand/samsung: make regs-onenand.h file local thermal/exynos: remove unnecessary header inclusions mmc: sdhci-s3c: remove platform dependencies ARM: samsung: move mfc device definition to s5p-dev-mfc.c ARM: exynos: move debug-macro.S to include/debug/ ARM: exynos: prepare for sparse IRQ ARM: exynos: introduce EXYNOS_ATAGS symbol ARM: tegra: build assembly files with -march=armv7-a ARM: Push selects for TWD/SCU into machine entries ARM: ux500: build hotplug.o for ARMv7-a ARM: ux500: move to multiplatform ARM: ux500: make remaining headers local ARM: ux500: make irqs.h local to platform ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> ...
2013-05-02Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "This branch contains part 1 of the platform updates for 3.10. Among the highlights: - Support for the new Atmel Cortex-A5 based platforms (SAMA5D3) - New support for CSR SiRFatlas6 SoCs - A handful of updates for NVidia T114 (a.k.a. Tegra 4) - A bunch of updates for the shmobile platforms - A handful of updates for davinci - A few updates for Qualcomm MSM - Plus a handful of other patches, defconfig updates, etc." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits) ARM: tegra: pm: fix build error w/o PM_SLEEP ARM: davinci: ensure global variables are declared ARM: davinci: sram.c: fix incorrect type in assignment ARM: davinci: da8xx dt: make file local symbols static ARM: davinci: da8xx: add remoteproc support ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries ARM: socfpga: Add clock entries into device tree ARM: socfpga: Enable soft reset ARM: EXYNOS: replace cpumask by the corresponding macro ARM: EXYNOS: handle properly the return values ARM: EXYNOS: factor out the idle states ARM: OMAP4: Enable fix for Cortex-A9 erratas ARM: OMAP2+: Export SoC information to userspace ARM: OMAP2+: SoC name and revision unification ARM: OMAP2+: Move common part of late init into common function ARM: tegra: pm: remove duplicated include from pm.c ARM: davinci: da850: override mmc DT node device name ARM: davinci: da850: add mmc DT entries mmc: davinci_mmc: add DT support ARM: SAMSUNG: check processor type before cache restoration in resume ...
2013-05-02Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...
2013-04-09ARM: tegra: build assembly files with -march=armv7-aArnd Bergmann
The tegra assembly files are written for ARMv7 and are not compatible with ARMv6, which leads to build warnings when compiling a dual ARMv6/v7 kernel. Since this code is only ever run on Tegra ARMv7 hardware, we can tell the assembler which architecture level to use. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-08cpufreq: tegra: Move driver to drivers/cpufreqViresh Kumar
This patch moves cpufreq driver of ARM based tegra platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-19ARM: tegra: add speedo-based process id for Tegra114Danny Huang
Add speedo-based process identification for Tegra114. Based on the work by: Alex Frid <afrid@nvidia.com> Signed-off-by: Danny Huang <dahuang@nvidia.com> [swarren: added include of bug.h] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-11ARM: tegra: Unify Device tree board filesHiroshi Doyu
Unify board-dt-tegra{30,114} to the Tegra20 DT board file, "tegra.c". Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-11ARM: tegra: Rename board-dt-tegra20.c to tegra.cHiroshi Doyu
This is the preparation to unify "board-dt-tegra{20,30,114}.c" to a single file "tegra.c". Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-29ARM: tegra: add Tegra114 ARM_CPUIDLE_WFI_STATE supportJoseph Lo
Adding the generic ARM_CPUIDLE_WFI_STATE support for Tegra114. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: Add initial support for Tegra114 SoC.Hiroshi Doyu
Add new Tegra 114 SoC support. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: remove legacy clock codePrashant Gaikwad
Remove all legacy clock code from mach-tegra. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: fix compile error when disable CPU_IDLEJoseph Lo
The "sleep.S" file has many functions that be shared by different module currently. Not just for CPU idle driver. Make it build as default now. Reported-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> [swarren: add sleep.o to separate line so each line only contains 1 file] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: make device can run on UPJoseph Lo
The reset handler code is used for either UP or SMP. To make Tegra device can compile for UP. It needs to be moved to another file that is not SMP only. This is because the reset handler also be needed by CPU idle "powered-down" mode. So we also need to put the reset handler init function in non-SMP only and init them always. And currently the implementation of the reset handler to know which CPU is OK to bring up was identital with "cpu_present_mask". But the "cpu_present_mask" did not initialize yet when the reset handler init function was moved to init early function. We use the "cpu_possible_mask" to replace "cpu_present_mask". Then it can work on both UP and SMP case. Signed-off-by: Joseph Lo <josephl@nvidia.com> [swarren: dropped the move of v7_invalidate_l1() from one file to another, to avoid conflicts with Pavel's cleanup of this function, adjust Makefile so each line only contains 1 file.] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: move timer.c to drivers/clocksource/Stephen Warren
Move arch/arm/mach-tegra/timer.c to drivers/clocksource/tegra20_timer.c so that the code is co-located with other clocksource drivers, and to reduce the size of the mach-tegra directory. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra30: cpuidle: add powered-down state for secondary CPUsJoseph Lo
This supports power-gated idle on secondary CPUs for Tegra30. The secondary CPUs can go into powered-down state independently. When CPU goes into this state, it saves it's contexts and puts itself to flow controlled WFI state. After that, it will been power gated. Be aware of that, you may see the legacy power state "LP2" in the code which is exactly the same meaning of "CPU power down". Based on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: cpuidle: separate cpuidle driver for different chipsJoseph Lo
The different Tegra chips may have different CPU idle states and data. Individual CPU idle driver make it more easy to maintain. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: rename the file of "sleep-tXX" to "sleep-tegraXX"Joseph Lo
For the naming consistency under the mach-tegra, we re-name the file of "sleep-tXX" to "sleep-tegraXX" (e.g., sleep-t30 to sleep-tegra30). Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: Tegra30 speedo-based process identificationDanny Huang
This patch adds speedo-based process identification support for Tegra30. Signed-off-by: Danny Huang <dahuang@nvidia.com> [swarren s/Tegra3/Tegra30/ in log print, s/T30/Tegra30/ in commit description] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15ARM: tegra: Add speedo-based process identificationDanny Huang
Detect CPU and core process ID by checking speedo corner tables. This can provide a more accurate process ID. Signed-off-by: Danny Huang <dahuang@nvidia.com> [swarren s/Tegra2/Tegra20/ in log print] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01Merge tag 'cleanup2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc cleanups, part 2 from Olof Johansson: "A shorter cleanup branch submitted separately due to dependencies with some of the previous topics. Major thing here is that the Broadcom bcmring platform is removed. It's an SoC that's used on some stationary VoIP platforms, and is in desperate need of some cleanup. Broadcom came back and suggested that we just deprecate the platform for now, since they aren't going to spend the resources needed on cleaning it up, and there are no users of the platform directly from mainline." Fix some conflicts due to BCM2835 getting added next to the removed BCMRING, and removal of tegra files that had been converted to devicetree. * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses. ARM: ux500: use __iomem pointers for MMIO ARM: Remove mach-bcmring ARM: clps711x: Remove board support for CEIVA ARM: clps711x: Fix register definitions ARM: clps711x: Fix lowlevel debug-macro ARM: clps711x: Added simple clock framework pinctrl: tegra: move pinconf-tegra.h content into drivers/pinctrl ARM: tegra: delete unused headers ARM: tegra: remove useless includes of <mach/*.h> ARM: tegra: remove dead code
2012-10-01Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc-specific updates from Olof Johansson: "Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well." Fix up trivial conflicts with the clk infrastructure changes. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits) ARM: shmobile: add new __iomem annotation for new code ARM: LPC32xx: Support GPI 28 ARM: LPC32xx: Platform update for devicetree completion of spi-pl022 ARM: LPC32xx: Board cleanup irqchip: fill in empty Kconfig ARM: SAMSUNG: Add check for NULL in clock interface ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state ARM: EXYNOS: Add bus clock for FIMD ARM: SAMSUNG: Fix HDMI related warnings ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock ARM: EXYNOS: Fix incorrect help text ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ...
2012-10-01Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
2012-09-20Merge tag 'tegra-for-3.7-dmaengine' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup ARM: tegra: switch to dmaengine The Tegra code-base has contained both a legacy DMA and a dmaengine driver since v3.6-rcX. This series flips Tegra's defconfig to enable dmaengine rather than the legacy driver, and removes the legacy driver and all client code. * tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ASoC: tegra: remove support of legacy DMA driver based access spi: tegra: remove support of legacy DMA driver based access ARM: tegra: apbio: remove support of legacy DMA driver based access ARM: tegra: dma: remove legacy APB DMA driver ARM: tegra: config: enable dmaengine based APB DMA driver + sync to 3.6-rc6
2012-09-17ARM: tegra: dma: remove legacy APB DMA driverLaxman Dewangan
Remove the legacy APB dma driver. The APB DMA support is moved to dmaengine based Tegra APB DMA driver. All clients are also moved to dmaengine based APB DMA driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-14ARM: tegra: remove dead codeStephen Warren
Now that all boards are converted to device tree, devices.[ch] and board-pinmux.[ch] are no longer used. So, remove them. The only exception is the EHCI platform data in devices.h. Move that data to board-dt-tegra20.c - the only places it's used. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-14Merge commit 'xceiv-for-v3.7' into for-3.7/cleanup2Stephen Warren
2012-09-14Merge branch 'for-3.7/common-clk' into for-3.7/cleanup2Stephen Warren
2012-09-14ARM: dt: tegra: harmony: add regulatorsLaxman Dewangan
Harmony uses a TPS6586x regulator. Instantiate this, and hook up a couple of fixed GPIO-controlled regulators too. Based on Ventana regulator patch by Stephen Warren <swarren@nvidia.com> and converted to Harmony. swarren made the following changes: * Added ldo0 regulator configuration to device tree, and updated board-harmony-pcie.c for the new regulator name. * Fixed vdd_1v05's voltage from 10.5V to 1.05V. * Modified board-harmony-pcie.c to obtain the en_vdd_1v05 GPIO number at run-time from device tree instead of hard-coding it. * Removed board-harmony{-power.c,.h} now that they're unused. * Disabled vdd_1v05 regulator; the code in board-harmony-pcie.c hijacks this GPIO for now. This will be fixed when the PCIe driver is re- written as a driver. The code can't regulator_get("vdd_1v05") right now, because the vdd_1v05 regulator's probe gets deferred due to its supply being the PMIC, which gets probed after the regulator the first time around, and this dependency is only resolved by repeated probing, which happens when deferred_probe_initcall() is called, which happens in a late initcall, whose runtime order relative to harmony_pcie_init() is undefined, since that's also called from a late initcall. * Removed unused harmony_pcie_initcall(). Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-14ARM: tegra: remove board (but not DT) support for HarmonyStephen Warren
Harmony can be booted using device tree with equal functionality as when booted using a board file. Remove as much of the board file as is possible, since it's no longer needed. Two special-cases are still left in board-dt-tegra20.c, since the Tegra PCIe driver doesn't support device tree yet, and the Harmony .dts file doesn't yet describe regulators which are needed for PCIe. This logic is now enabled unconditionally rather than via CONFIG_MACH_HARMONY. While this is more code than other boards, it's still unlikely to be much of a problem, and both regulators and PCIe should be supported via device tree in the near future, allowing the remaining code to be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-14ARM: tegra: remove board (but not DT) support for Paz00Stephen Warren
Paz00 (Toshiba AC100) can be booted using device tree with equal functionality as when booted using a board file. Remove as much of the board file as is possible, since it's no longer needed. One special-case is still left in board-dt-tegra20.c, since there is no way to create a WiFi rfkill device from device tree yet. This logic is now enabled unconditionally rather than via CONFIG_MACH_PAZ00. The extra cases where it's enabled (.configs which did not enable Paz00 support) shouldn't impact much since the amount of code is tiny. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-By: Marc Dietrich <marvin24@gmx.de>
2012-09-14ARM: tegra: remove board (but not DT) support for TrimSliceStephen Warren
TrimSlice can be booted using device tree with equal functionality as when booted using a board file. Remove the board file since it's no longer needed. One special-case is still left in board-dt-tegra20.c, since the Tegra PCIe driver doesn't support device tree yet. This logic is now enabled by CONFIG_TEGRA_PCI rather than via CONFIG_MACH_TRIMSLICE. The extra cases where it's enabled (.configs which did not enable TrimSlice support) shouldn't impact much since the amount of code is tiny. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-13ARM: tegra20: add CPU hotplug supportJoseph Lo
Hotplug function put CPU in offline or online mode at runtime. When the CPU been put into offline, it was been clock gated. The offline CPU can be power gated, when the remaining CPU goes into LP2. Based on the worked by: Colin Cross <ccross@android.com> Gary King <gking@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-13ARM: tegra30: add CPU hotplug supportJoseph Lo
Hotplug function put CPUs in offline or online state at runtime. When the CPU been put in the offline state, it was been clock and power gated. Except primary CPU other CPUs can be hotplugged. Based on the work by: Scott Williams <scwilliams@nvidia.com> Colin Cross <ccross@android.com> Gary King <gking@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-06ARM: tegra: Rename tegra20 clock filePrashant Gaikwad
Make the name consistent with other files. s/tegra2/tegra20 Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-06ARM: tegra20: Separate out clk ops and clk dataPrashant Gaikwad
Move clock initialization data to separate file. This is required for migrating to generic clock framework if static initialization is used. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-06ARM: tegra30: Separate out clk ops and clk dataPrashant Gaikwad
Move clock initialization data to separate file. This is required for migrating to generic clock framework if static initialization is used. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>