| Age | Commit message (Collapse) | Author |
|---|
|
Make parallel data strobed on rising clock edge
For SKU2 MODS get correct CRC.
Bug 995623
Change-Id: I70f4b87e781821cf4ff8370c17b79f5bea7dc55c
Signed-off-by: Dongfang Shi <dshi@nvidia.com>
Reviewed-on: http://git-master/r/121824
(cherry-pick from 5200d0f10b936e00dbc2a946eed8c2e48b039943)
Reviewed-on: http://git-master/r/122537
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Bob Johnston <bjohnston@nvidia.com>
Reviewed-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
|
|
Ported Peter's original change 86413 to main.
board-p1852-panel.c:
Add support for primary and secondary LVDS displays, and secondary HDMI display.
board-p1852-pinmux.c:
Add configuration for HDMI and LVDS
board-p1852.c:
board-p1852.h:
Support for determining which p1852 sku is in use
hdmi.c:If no edid retrieved, but there's a hardwired mode, enable it
(used to support HDMI->LVDS output on p1852 sku 2)
devices.c:added secondary display data.
Bug 977859
Bug 994011
Change-Id: Ide8fb6bf7dd873b1d50269fb98d7c1687e4d9073
Signed-off-by: Dongfang Shi <dshi@nvidia.com>
Reviewed-on: http://git-master/r/100438
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Move the device structures to the driver source code files. Register
all nvhost_device's in one loop which is called from board file.
host1x driver code is moved to live under host1x, too. This causes
a need to add host to include path of tegradc and nvavp.
Bug 982965
Change-Id: If99cf9d1ef6bc24663ee8294c19370429ed04ca7
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/104076
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Enable WXGA display and touch input for p1852 touch panel.
board-p1852-panel.c:
added WXGA timing for atmel touch panel.
board-p1852.c:
initialize touch panel if touch input is defined.
board-p1852.h:
added p1852 touch panel GPIO and bus.
tegra_p1852_gnu_linux_defconfig:
added touch panel flags, not defined by default.
bug 936232
Change-Id: Ia50b991f6aa5ed0ece458ad3871a68684a9234a6
Signed-off-by: Dongfang Shi <dshi@nvidia.com>
Reviewed-on: http://git-master/r/101348
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Use nvmap.h include file from kernel/include instead of mach-tegra/include.
Bug 854182
Change-Id: Ic82b35d6c2e1c49461575a7bbbfd28ee43921466
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Reviewed-on: http://git-master/r/102723
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
|
|
- the suspend order of devices is governed by the order
in which devices are registered
- this commit ensures that nvhost master is registered before
any of the graphics devices
- previously this was done in rootfs_init call which is
later than arch_init calls of board-xxx-panel.c
- this caused tegra-dc device to be registered *before* nvhost
master device. as a result it was suspended *later* than nvhost
master device. this is a clear violation of dependency rule
for nvhost. this caused suspend-resume to fail for L4T
- this worked on android as it has CONFIG early suspend enabled
while it failed for L4T which doesn't have CONFIG early suspend
enabled
Bug 947617
Change-Id: I6cd405f3ba23d004e7659140019f5130e6c25159
Signed-off-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-on: http://git-master/r/87756
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>
|
|
Change-Id: Ibbddfeb25bbbb5610c1cd18fb20029fd0c4a009e
Signed-off-by: Bob Johnston <bjohnston@nvidia.com>
Reviewed-on: http://git-master/r/86250
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
- tegra_grhost is a platform device that represents host1x
- nvhost has device host1x which represents the same hardware
- merge these two device structs
- as the new struct is a nvhost_device, platform_driver
is also converted into a nvhost_driver
- register nvhost device before other graphics devices.
this ensures that nvhost_probe() is called as soon as
nvhost_driver is registered with the core.
- this also ensures that nvmap is probed first, followed
by nvhost, followed by tegra-dc and nvavp (if they
are enabled).
Change-Id: Ic420a6516a9cb20d6f481692a4db10fa6053dd90
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Signed-off-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-on: http://git-master/r/82631
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
bug 871603
P1852 is a T30 based Automotive platform.
Signed-off-by: Amlan Kundu <akundu@nvidia.com>
Signed-off-by: Manoj Chourasia <mchourasia@nvidia.com>
Reviewed-on: http://git-master/r/72253
(cherry picked from commit 98d50016e70a22ae7e8e109cfb6633a8fe75f905)
Change-Id: Iede9881fc1168bb6802694e233554d84adfb8f44
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Reviewed-on: http://git-master/r/79981
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Tested-by: Bharat Nihalani <bnihalani@nvidia.com>
|
