summaryrefslogtreecommitdiff
path: root/arch/arm/plat-mxc/include/mach/mxc.h
AgeCommit message (Collapse)Author
2011-07-07ARM i.MX mxc.h: use CONFIG_SOC_* instead of CONFIG_ARCH_*Sascha Hauer
CONFIG_ARCH_* are deprecated, so remove one user. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19ARM: imx: remove some deprecated and unused #definesUwe Kleine-König
LAKML-Reference: 1302464943-20721-6-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19ARM: remove support for mxc91231Uwe Kleine-König
Since support for mxc91231 was introduced 2009 it only saw patches that were part of (mxc or arm) global cleanups. The only supported machine only had 4 devices (2x UART, sdhc, watchdog). Cc: Dmitriy Taychenachev <dimichxp@gmail.com> LAKML-Reference: 1302211482-17926-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-23ARM: mx51: Implement code to allow mx51 to enter WFIDinh Nguyen
Implement code for MX51 that allows the SoC to enter WFI when arch_idle is called. This patch is also necessary for correctly suspending the system. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-23ARM: mx51: Print silicon revision on bootFabio Estevam
Having the silicon revision to appear on the boot log is a useful information. MX31 and MX35 already show the silicon revision on boot. Add support for displaying such information for MX51 as well. Tested on a MX51EVK, where it shows: CPU identified as i.MX51, silicon rev 3.0 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx3x: clean up ARCH_MX3XRichard Zhao
Move to SOC_SOC_IMX3X. Leave ARCH_MX31/35 definitions there, in case some place prevent multi-soc single image. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx5x: clean up ARCH_MX5XRichard Zhao
Move to SOC_SOC_IMX5X. Leave only places which prevent multi-soc using ARCH_MX5X. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arm: mx50: add core functions support except clockRichard Zhao
Add core definitions and memory map, gpio, irq, iomux, uart device support. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arm: mx5: mx51/53 have different mxc_cpu_type definitionRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-28ARM: imx: Get the silicon version from the IIM moduleDinh Nguyen
Instead of reading the silicon version from ROM, we should read the SREV register from the IIM. Freescale has dropped all support for MX51 REV1.0, only MX51 REV 2.0 and 3.0 are valid. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM: imx: Add core definitions for MX53Dinh Nguyen
Add iomux, clocks, and memory map for Freescale's MX53 SoC. Add cpu_is_mx53 function to common.h. Add 3 more banks of gpio's to mxc_gpio_ports. Add MX53 phys offset address. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-22cpufreq for freescale mx51Yong Shen
Currently, only two operating points: 160Mhz and 800Mhz. the operating points are tested on babbage 3.0 Signed-off-by: Yong Shen <yong.shen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-09mxc: changes to common plat-mxc code to add support for i.MX5Amit Kucheria
Prepare for i.MX5 SoC code by adding the relevant macros to common plat-mxc code. Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-01-08imx: define functions to configure chip selects in the WEIMUwe Kleine-König
This has the addional effect that the macros CSCR_U, CSCR_L and CSCR_A are not used anymore in mach-pcm038.c and mach-qong.c. These still use the deprecated IO_ADDRESS macro and shouldn't be used in new code. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
2010-01-08imx: mangle addresses after adding the offsetUwe Kleine-König
don't use IO_ADDRESS($base) + $offset but IO_ADDRESS($base + $offset) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Rabin Vincent <rabin@rab.in> Cc: "Agustín Ferrín Pozuelo" <gatoguan-os@yahoo.com> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Daniel Mack <daniel@caiaq.de> Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
2009-08-14MXC: add basic MXC91231 supportDmitriy Taychenachev
Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14Add i.MX25 supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: add cpu_is_ macrosSascha Hauer
We had hardcoded cpu_is_ macros for mxc architectures till now. As we want to run the same kernel on i.MX31 and i.MX35 this patch adds cpu_is_ macros which expand to 0 or 1 if only one architecture is compiled in and only check for the cpu type if more than one architecture is compiled in. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13arm/imx2x: split i.MX21/i.MX27 register definitionsHolger Schurig
* define new CONFIG_ARCH_MX21 (this one is currently mutually exclusive to CONFIG_ARCH_MX27, but this might change) * splits one header file. Memory definitions, interrupt sources, DMA channels are split into common part, i.MX27 specific and i.MX21 specific. * guard access to UART5/UART6, which don't exist on i.MX21 Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13arm/imx21: add kbuild support for the Freescale i.MX21Holger Schurig
* adds Kconfig variables * specifies different physical address for i.MX21 because of the different memory layouts * disables support for UART5/UART6 in the i.MX serial driver (the i.MX21 doesn't have those modules) Based on code from "Martin Fuzzey" <mfuzzey@gmail.com> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09mxc: add cscr register defintionsLuotao Fu
This adds macros to get CSCR upper, lower and additional registers. These registers are needed to configure a chip select line. The offset layouts of these Registers are identical on mx27 and mx31, hence we can use the macros in generic way Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-04 21:33:22 +0000