summaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap/counter_32k.c
AgeCommit message (Collapse)Author
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-20ARM/time: Remove read_boot_clock64()Pavel Tatashin
read_boot_clock64() is deleted, and replaced with read_persistent_wall_and_boot_offset(). The default implementation of read_persistent_wall_and_boot_offset() provides a better fallback than the current stubs for read_boot_clock64() that arm has with no users, so remove the old code. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-19-pasha.tatashin@oracle.com
2015-04-03ARM, clocksource/drivers: Provide read_boot_clock64() and ↵Xunlei Pang
read_persistent_clock64() and use them As part of addressing "y2038 problem" for in-kernel uses, this patch converts read_boot_clock() to read_boot_clock64() and read_persistent_clock() to read_persistent_clock64() using timespec64 by converting clock_access_fn to use timespec64. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> (for tegra part) Cc: Russell King <rmk@dyn-67.arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-7-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03ARM: OMAP: 32k counter: Provide y2038-safe omap_read_persistent_clock() ↵Xunlei Pang
replacement As part of addressing "y2038 problem" for in-kernel uses, this patch adds the y2038-safe omap_read_persistent_clock64() using timespec64. Because we rely on some subsequent changes to convert arm multiarch support, omap_read_persistent_clock() will be removed then. Also remove the needless spinlock, because read_persistent_clock() doesn't run simultaneously. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-5-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13clocksource: Rename __clocksource_updatefreq_*() to ↵John Stultz
__clocksource_update_freq_*() Ingo requested this function be renamed to improve readability, so I've renamed __clocksource_updatefreq_scale() as well as the __clocksource_updatefreq_hz/khz() functions to avoid squishedtogethernames. This touches some of the sh clocksources, which I've not tested. The arch/arm/plat-omap change is just a comment change for consistency. Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1426133800-29329-13-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-08ARM: OMAP: counter-32k: raw read and write endian fixVictor Kamensky
All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-21ARM: OMAP: Switch to sched_clock_register()Stephen Boyd
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-06-12sched_clock: Make ARM's sched_clock generic for all architecturesStephen Boyd
Nothing about the sched_clock implementation in the ARM port is specific to the architecture. Generalize the code so that other architectures can use it by selecting GENERIC_SCHED_CLOCK. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [jstultz: Merge minor collisions with other patches in my tree] Signed-off-by: John Stultz <john.stultz@linaro.org>
2012-12-28ARM: OMAP: 32k counter: resolve sparse warningsPaul Walmsley
Commit 1fe97c8f6a1de67a5f56e029a818903d5bed8017 ("ARM: OMAP: Make OMAP clocksource source selection using kernel param") results in a new warning from sparse: arch/arm/plat-omap/counter_32k.c:86:12: warning: symbol 'omap_init_clocksource_32k' was not declared. Should it be static? This second version fixes this warning by including <plat/counter-32k.h>, at Tony's request. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Tony Lindgren <tony@atomide.com>
2012-10-31ARM: OMAP: Remove plat-omap/common.hTony Lindgren
Most of the prototypes in plat-omap/common.h are not common to omap1 and omap2+, they are local to omap2+ and should not be in plat-omap/common.h. The only shared function prototype in this file is omap_init_clocksource_32k(), let's put that into counter-32k.h. Note that the new plat/counter-32k.h must not be included from drivers, that will break omap2+ build for CONFIG_MULTIPLATFORM. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-18ARM: OMAP: remove plat/clock.hPaul Walmsley
Remove arch/arm/plat-omap/include/plat/clock.h by merging it into arch/arm/mach-omap1/clock.h and arch/arm/mach-omap2/clock.h. The goal here is to facilitate ARM single image kernels by removing includes via the "plat/" symlink. Signed-off-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: fixed to remove duplicate clock.h includes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17ARM: OMAP: Make plat/common.h local to mach-omap1 and mach-omap2Tony Lindgren
We cannot keep this in plat/common.h for common zImage support. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-08ARM: OMAP: counter: add locking to read_persistent_clockColin Cross
read_persistent_clock uses a global variable, use a spinlock to ensure non-atomic updates to the variable don't overlap and cause time to move backwards. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+Tony Lindgren
As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10ARM: OMAP: remove plat/board.h fileIgor Grinberg
plat/board.h file is now empty - remove it. Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-09ARM: OMAP: counter-32k: Select the CR register offset using the IP schemeR Sricharan
OMAP socs has a legacy and a highlander version of the 32k sync counter IP. The register offsets vary between the highlander and the legacy scheme. So use the 'SCHEME' bits(30-31) of the revision register to distinguish between the two versions and choose the CR register offset accordingly. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-05-26Merge tag 'cleanup2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc cleanups (part 2) from Olof Johansson: "More cleanups, continuing an earlier set with omap and samsung specific cleanups. These could not go into the first set because they have dependencies on various other series that in turn depend on the first cleanups." Fixed up conflicts in arch/arm/plat-omap/counter_32k.c due to commit bd0493eaaf5c: "move read_{boot,persistent}_clock to the architecture level" that changed how the persistent clocks were handled. And trivial conflicts in arch/arm/mach-omap1/common.h due to just independent changes close to each other. * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) ARM: SAMSUNG: merge plat-s5p into plat-samsung ARM: SAMSUNG: move options for common s5p into plat-samsung/Kconfig ARM: SAMSUNG: move setup code for s5p mfc and mipiphy into plat-samsung ARM: SAMSUNG: move platform device for s5p uart into plat-samsung ARM: SAMSUNG: move hr timer for common s5p into plat-samsung ARM: SAMSUNG: move pm part for common s5p into plat-samsung ARM: SAMSUNG: move interrupt part for common s5p into plat-samsung ARM: SAMSUNG: move clock part for common s5p into plat-samsung ARM: S3C24XX: Use common macro to define resources on dev-uart.c ARM: S3C24XX: move common clock init into common.c ARM: S3C24XX: move common power-management code to mach-s3c24xx ARM: S3C24XX: move plat-s3c24xx/dev-uart.c into common.c ARM: S3C24XX: move plat-s3c24xx/cpu.c ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to SOC_AM33XX ARM: OMAP2+: Kconfig: convert SOC_OMAPTI81XX to SOC_TI81XX GPMC: add ECC control definitions ARM: OMAP2+: dmtimer: remove redundant sysconfig context restore ARM: OMAP: AM35xx: convert 3517 detection/flags to AM35xx ARM: OMAP: AM35xx: remove redunant cpu_is checks for AM3505 ARM: OMAP1: Pass dma request lines in platform data to MMC driver ...
2012-05-09ARM: OMAP: Make OMAP clocksource source selection using kernel paramVaibhav Hiremath
Current OMAP code supports couple of clocksource options based on compilation flag (CONFIG_OMAP_32K_TIMER). The 32KHz sync-timer and a gptimer which can run on 32KHz or system clock (e.g 38.4 MHz). So there can be 3 options - 1. 32KHz sync-timer 2. Sys_clock based (e.g 13/19.2/26/38.4 MHz) gptimer 3. 32KHz based gptimer. The optional gptimer based clocksource was added so that it can give the high precision than sync-timer, so expected usage was 2 and not 3. Unfortunately option 2, clocksource doesn't meet the requirement of free-running clock as per clocksource need. It stops in low power states when sys_clock is cut. That makes gptimer based clocksource option useless for OMAP2/3/4 devices with sys_clock as a clock input. So, in order to use option 2, deeper idle state MUST be disabled. Option 3 will still work but it is no better than 32K sync-timer based clocksource. We must support both sync timer and gptimer based clocksource as some OMAP based derivative SoCs like AM33XX does not have the sync timer. Considering above, make sync-timer and gptimer clocksource runtime selectable so that both OMAP and AMXXXX continue to use the same code. And, in order to precisely configure/setup sched_clock for given clocksource, decision has to be made early enough in boot sequence. So, the solution is, Use standard kernel parameter ("clocksource=") to override default 32k_sync-timer, in addition to this, we also use hwmod database lookup mechanism, through which at run-time we can identify availability of 32k-sync timer on the device, else fall back to gptimer. Also, moved low-level SoC specific init code to respective files, (mach-omap1/timer32k.c and mach-omap2/timer.c) Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com> Cc: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-06ARM: 7413/1: move read_{boot,persistent}_clock to the architecture levelMarc Zyngier
At the moment, read_persistent_clock is implemented at the platform level, which makes it impossible to compile these platforms in a single kernel. Implement these two functions at the architecture level, and provide a thin registration interface for both read_boot_clock and read_persistent_clock. The two affected platforms (OMAP and Tegra) are converted at the same time. Reported-by: Jeff Ohlstein <johlstei@codeaurora.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-24ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.hTony Lindgren
This is needed to minimize io.h so the SoC specific io.h for ARMs can removed. Note that minimal driver changes for DSS and RNG are needed to include cpu.h for SoC detection macros. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-18ARM: 7205/2: sched_clock: allow sched_clock to be selected at runtimeMarc Zyngier
sched_clock() is yet another blocker on the road to the single image. This patch implements an idea by Russell King: http://www.spinics.net/lists/linux-omap/msg49561.html Instead of asking the platform to implement both sched_clock() itself and the rollover callback, simply register a read() function, and let the ARM code care about sched_clock() itself, the conversion to ns and the rollover. sched_clock() uses this read() function as an indirection to the platform code. If the platform doesn't provide a read(), the code falls back to the jiffy counter (just like the default sched_clock). This allow some simplifications and possibly some footprint gain when multiple platforms are compiled in. Among the drawbacks, the removal of the *_fixed_sched_clock optimization which could negatively impact some platforms (sa1100, tegra, versatile and omap). Tested on 11MPCore, OMAP4 and Tegra. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Colin Cross <ccross@android.com> Cc: Erik Gilling <konkers@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alessandro Rubini <rubini@unipv.it> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org> Tested-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-10Convert OMAPs 32kHz clocksource implementation to use the generic MMIORussell King - ARM Linux
clocksource support. This achieves several things: 1. It means we get rid of all these helper functions which frankly should never have been necessary. 2. It means omap_readl() inside these helper functions does not appear in ftrace output. Another plus is that we avoid the overhead of calculating the address to read each time, but a minus is that we use readl() which has a barrier. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [tony@atomide.com: updated to use ioremap] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-27omap2+: Use dmtimer macros for clocksourceTony Lindgren
Use dmtimer macros for clocksource. As with the clockevent, this allows us to initialize the rest of dmtimer code later on. Note that eventually we will be initializing the timesource from init_early so sched_clock will work properly for CONFIG_PRINTK_TIME. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-01-27omap: Start using CONFIG_SOC_OMAPTony Lindgren
We want to have just CONFIG_ARCH_OMAP2, 3 and 4. The rest are nowadays just subcategories of these. Search and replace the following: ARCH_OMAP2420 SOC_OMAP2420 ARCH_OMAP2430 SOC_OMAP2430 ARCH_OMAP3430 SOC_OMAP3430 No functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Sourav Poddar <sourav.poddar@ti.com>
2011-01-19omap1: Fix sched_clock implementation when both MPU timer and 32K timer are usedTony Lindgren
Earlier patches select HAVE_SCHED_CLOCK for omaps. To have working sched_clock also for MPU timer, we need to implement it in a way where the right one gets selected during the runtime. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-19omap1: Fix booting for 15xx and 730 with omap1_defconfigTony Lindgren
For omap15xx and 730 we need to use the MPU timer as the 32K timer is not available. For omap16xx we want to use the 32K timer because of PM. Fix this by allowing to build in both timers. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-18OMAP: counter_32k: init clocksource as part of machine timer initPaul Walmsley
After commit dc548fbbd2ecd0fc3b02301d551e5f8e19ae58fd ("ARM: omap: convert sched_clock() to use new infrastructure"), OMAPs that use the 32KiHz "synchronization timer" as their clocksource crash during boot: [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 0.000000] pgd = c0004000 [ 0.000000] [00000000] *pgd=00000000 [ 0.000000] Internal error: Oops: 80000005 [#1] SMP [ 0.000000] last sysfs file: [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Tainted: G W (2.6.37-07734-g2467802 #7) [ 0.000000] PC is at 0x0 [ 0.000000] LR is at sched_clock_poll+0x2c/0x3c [ 0.000000] pc : [<00000000>] lr : [<c0060b74>] psr: 600001d3 [ 0.000000] sp : c058bfd0 ip : c058a000 fp : 00000000 [ 0.000000] r10: 00000000 r9 : 411fc092 r8 : 800330c8 [ 0.000000] r7 : c05a08e0 r6 : c0034c48 r5 : c05ffc40 r4 : c0034c4c [ 0.000000] r3 : c05ffe6c r2 : c05a0bc0 r1 : c059f098 r0 : 00000000 [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c53c7f Table: 8000404a DAC: 00000017 This is due to the recent ARM init_sched_clock() changes and the late initialization of the counter_32k clock source. More information here: http://marc.info/?l=linux-omap&m=129513468605208&w=2 Fix by initializing the counter_32k clocksource during the machine timer initialization. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Thomas Weber <weber@corscience.de> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-01-05Merge branch 'clksrc' into develRussell King
Conflicts: arch/arm/mach-vexpress/v2m.c arch/arm/plat-omap/counter_32k.c arch/arm/plat-versatile/Makefile
2010-12-22ARM: omap: convert sched_clock() to use new infrastructureRussell King
Convert omap to use the new sched_clock() infrastructure for extending 32bit counters to full 64-bit nanoseconds. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: ensure all sched_clock() implementations are notrace markedRussell King
ftrace requires sched_clock() to be notrace. Ensure that all implementations are so marked. Also make sure that they include linux/sched.h Also ensure OMAP clocksource read functions are marked notrace as they're used for sched_clock() too. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Eric Miao <eric.y.miao@gmail.com> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ARM: omap: update clock source registrationRussell King
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new interfaces were added which simplify (and optimize) the selection of the divisor shift/mult constants. Switch over to using this new interface. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-06arm: plat-omap: counter_32k: use IS_ERR() instead of NULL checkVasiliy Kulikov
clk_get() returns ERR_PTR() on error, not NULL. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: updated to include err.h to compile on omap1] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-08OMAP: split plat-omap/common.cPaul Walmsley
Split plat-omap/common.c into three pieces: 1. the 32KiHz sync timer and clocksource code, which now lives in plat-omap/counter_32k.c; 2. the OMAP2+ common code, which has been moved to mach-omap2/common.c; 3. and the remainder of the OMAP-wide common code, which includes the deprecated ATAGs code and a deprecated video RAM reservation function. The primary motivation for doing this is to move the OMAP2+-specific parts into an OMAP2+-specific file, so that build breakage related to the System Control Module code can be resolved. Benoît Cousson <b-cousson@ti.com> suggested a new filename and found some bugs in the counter_32k.c comments - thanks Benoît. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>