Age | Commit message (Collapse) | Author |
|
The power domain for clocks is not needed by audio drivers, which
is handled by clock driver.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
|
|
The vbus regulator should be put under its node, not but at
usb controller node.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
|
|
Enable USBPHY, otherwise, USB controller can't work properly.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
|
|
imx8dxl phanton mek board doesn't support lvds and dc0 subsystem
resources are not owned by A-core os. So disable lvds subsystem.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
|
|
Enable rpsmg to add partition reset function support for imx8dxl-phantom
platform.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
|
|
Add nvmem for fec2 node to get MAC address from eFuse.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
|
|
Enable epdev regulator for pcie wlan on imx8dxl phantom mek.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
|
|
Add the RPMSG node on iMX8DXL phantom MEK board.
Signed-off-by: richard zhu <hongxing.zhu@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
|
|
Add the PCIe on iMX8DXL phantom MEK board.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
|
|
After commit f7907e57aea2 ("regulator: fixed: add off-on-delay"), user
can use "off-on-delay-us" to define the regulator off-delay time.
For SD card, according to the spec requirement, for sd card power reset
operation, it need sd card supply voltage to be lower than 0.5v and keep
over 1ms, otherwise, next time power back the sd card supply voltage to
3.3v, sd card can't support SD3.0 mode again.
This patch add the off-on-delay-us to each board, make sure the sd power
reset behavior is align with the specification. Without this patch, when
do quick system suspend/resume test, some sd card can't work at SD3.0 mode
after system resume back.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Leonard Crestez <leonard.crestez@nxp.com>
|
|
Add CPU cooling support for i.MX8QXP.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
|
|
Add i.MX8DXL phantom mek board DT.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
|