| Age | Commit message (Collapse) | Author |
|---|
|
With the addition of the Apalis Evaluation Board v1.2, a new audio codec,
NAU88C22, has been introduced, utilizing the simple-audio-card driver. To
fix the issue of the NAU8822 driver not playing sounds, enable the
SND_SIMPLE_CARD configuration.
Upstream-Status: Inappropriate [configuration]
- For mainline, our defconfig is built by merging the mainline
configuration called imx_v6_v7_defconfig with the one inside
meta-toradex-bsp-common called toradex_imx_v6_v7_defconfig. These
configurations are already enabled there.
Fixes: 80b5c496c67d ("apalis_imx6_defconfig: Add INA2XX, LM75 and NAU8822 configs")
Related-to: ELB-5534
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
|
|
Apalis Evaluation Board v1.2 added some new on-board chips (compared to
v1.1) that are not yet enabled in the Linux kernel defconfig file:
- Audio codec NAU88C22YG
- Current/Voltage measurement INA219
- Temperature Sensor LM75
So add the necessary drivers as modules to support these new devices.
Upstream-Status: Inappropriate [configuration]
- For mainline, our defconfig is built by merging the mainline
configuration called imx_v6_v7_defconfig with the one inside
meta-toradex-bsp-common called toradex-imx_v6_v7_defconfig. These
configurations are already enabled there.
Related-to: ELB-5534
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
|
|
Add support for the new Apalis Evaluation Board v1.2. Because
only the imx6q-apalis-eval.dts was available, the imx6q-apalis-eval.dtsi
has been created which has common hardware configurations for v1.0, v1.1
and v1.2. Both imx6q-apalis-eval.dts and imx6q-apalis-eval-v1.2.dts
files include imx6q-apalis-eval.dtsi.
Versions 1.0 and 1.1 are compatible with each other and should
use imx6q-apalis-eval.dts file. Now for v1.2, the new device-tree file
should be used.
Upstream-Status: Submitted [https://lore.kernel.org/all/20240124141849.26254-1-hiagofranco@gmail.com/]
Related-to: ELB-5534
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
|
|
Newer variants of Ixora boards require a power-up delay when powering up
the CAN transceiver of up to 1ms.
Upstream-Status: Submitted [https://lore.kernel.org/all/20231020153022.57858-3-andrejs.cainikovs@gmail.com/]
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
|
A pin controlled by the iomuxc-snvs pin controller must be
specified under the dtb's iomuxc-snvs node.
Move the one and only pin of that category from the iomuxc node
and set the pinctrl-0 using it accordingly.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
The usdhc1-cd-slp-grp node in the device tree is making use of PAD_LPSR
definitions and these definitions are not compatible with the iomuxc
node. Because of that, instead of setting up GPIO1_IO00 this group is
setting up the registers for GPIO1_IO15.
Moving the group to the iomuxc_lpsr node makes the setup for the correct
pin and also makes GPIO1_IO15 available again as a standard GPIO.
Relates-to: ELB-4525
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
|
|
|
|
This is the 5.4.193 stable release
Conflicts:
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
drivers/edac/synopsys_edac.c
drivers/mmc/host/sdhci-esdhc-imx.c
drivers/mmc/host/sdhci.c
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
sound/soc/codecs/msm8916-wcd-analog.c
|
|
[ Upstream commit 45974e4276a8d6653394f66666fc57d8ffa6de9a ]
The correct spelling for the property is gpios. Otherwise, the regulator
will neither reserve nor control any GPIOs. Thus, any SD/MMC card which
can use UHS-I modes will fail.
Fixes: c2e4987e0e02 ("ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 46ff3df87215ff42c0cd2c4bdb7d74540384a69c ]
The pinout of the OMAP35 and DM37 variants of the SOM-LV are the
same, but the macros which define the pinmuxing are different
between OMAP3530 and DM3730. The pinmuxing was correct for
for the DM3730, but wrong for the OMAP3530. Since the boot loader
was correctly pin-muxing the pins, this was not obvious. As the
bootloader not guaranteed to pinmux all the pins any more, this
causes an issue, so the pinmux needs to be moved from a common
file to their respective board files.
Fixes: f8a2e3ff7103 ("ARM: dts: Add minimal support for LogicPD OMAP35xx SOM-LV devkit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-Id: <20220303171818.11060-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 942da3af32b2288e674736eb159d1fc676261691 ]
The bootloader for the AM3517 has previously done much of the pin
muxing, but as the bootloader is moving more and more to a model
based on the device tree, it may no longer automatically mux the
pins, so it is necessary to add the pinmuxing to the Linux device
trees so the respective peripherals can remain functional.
Fixes: 6ed1d7997561 ("ARM: dts: am3517-evm: Add support for UI board and Audio")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-Id: <20220226214820.747847-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09269dd050094593fc747f2a5853d189fefcb6b5 ]
Commit a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3")
introduces general mmc aliases. Let's tailor them to the need
of the GTA04 board which does not make use of mmc2 and mmc3 interfaces.
Fixes: a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Message-Id: <dc9173ee3d391d9e92b7ab8ed4f84b29f0a21c83.1646744420.git.hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e486fe341fabd8e583f3d601a874cd394979c45 ]
The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the
PCK0 output of the SoC and is expected to be set to 12MHz. Previously
this was mapped using pre-common clock API calls in the audio machine
driver but the conversion to the common clock framework broke that so
describe things in the DT instead.
Fixes: ff78a189b0ae55f ("ARM: at91: remove old at91-specific clock driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220404102806.581374-2-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f83e6b4161617014017a694888dd8743f46f071 ]
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
Fixes: fd1c07861491 ("ARM: OMAP4: Fix the init code to have OMAP4460 errata available in DT build")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Message-Id: <20220309104302.18398-1-linmq006@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fa51e1dc4b91375bc18349663a52395ad585bd3c ]
On a custom carrier board with a i.MX6Q Apalis SoM, the sgtl5000 codec
on the SoM is often not detected and the following error message is
seen when the sgtl5000 driver tries to read the ID register:
sgtl5000 1-000a: Error reading chip id -6
The reason for the error is that the MCLK clock is not provided
early enough.
Fix the problem by describing the MCLK pinctrl inside the codec
node instead of placing it inside the audmux pinctrl group.
With this change applied the sgtl5000 is always detected on every boot.
Fixes: 693e3ffaae5a ("ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b3f1dd52c991d79118f35e6d1bf4d7cb09882e38 ]
When building multi_v7_defconfig+CONFIG_SMP=n, -Warray-bounds exposes
a couple negative array index accesses:
arch/arm/mach-vexpress/spc.c: In function 've_spc_clk_init':
arch/arm/mach-vexpress/spc.c:583:21: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds]
583 | if (init_opp_table[cluster])
| ~~~~~~~~~~~~~~^~~~~~~~~
arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table'
556 | bool init_opp_table[MAX_CLUSTERS] = { false };
| ^~~~~~~~~~~~~~
arch/arm/mach-vexpress/spc.c:592:18: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds]
592 | init_opp_table[cluster] = true;
| ~~~~~~~~~~~~~~^~~~~~~~~
arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table'
556 | bool init_opp_table[MAX_CLUSTERS] = { false };
| ^~~~~~~~~~~~~~
Skip this logic when built !SMP.
Link: https://lore.kernel.org/r/20220331190443.851661-1-keescook@chromium.org
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 83a1cde5c74bfb44b49cb2a940d044bb2380f4ea upstream.
With newer versions of GCC, there is a panic in da850_evm_config_emac()
when booting multi_v5_defconfig in QEMU under the palmetto-bmc machine:
Unable to handle kernel NULL pointer dereference at virtual address 00000020
pgd = (ptrval)
[00000020] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0 #1
Hardware name: Generic DT based system
PC is at da850_evm_config_emac+0x1c/0x120
LR is at do_one_initcall+0x50/0x1e0
The emac_pdata pointer in soc_info is NULL because davinci_soc_info only
gets populated on davinci machines but da850_evm_config_emac() is called
on all machines via device_initcall().
Move the rmii_en assignment below the machine check so that it is only
dereferenced when running on a supported SoC.
Fixes: bae105879f2f ("davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/YcS4xVWs6bQlQSPC@archlinux-ax161/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8b2360c7157b462c4870d447d1e65d30ef31f9aa ]
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from jive_mtdset().
Fixes: 9db829f485c5 ("[ARM] JIVE: Initial machine support for Logitech Jive")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 31d3687d6017c7ce6061695361598d9cda70807a upstream.
Reorder dmas and dma-names property for spi controller node to make it
compliant with bindings.
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220326042313.97862-2-singh.kuldeep87k@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 583d6b0062640def86f3265aa1042ecb6672516e upstream.
Reorder dma and dma-names property for serial node to make it compliant
with bindings.
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220326042313.97862-3-singh.kuldeep87k@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d67412f24cc3a2c05f35f7c856addb07a2960ce upstream.
iop32x is one of the last platforms to use IRQ 0, and this has apparently
stopped working in a 2014 cleanup without anyone noticing. This interrupt
is used for the DMA engine, so most likely this has not actually worked
in the past 7 years, but it's also not essential for using this board.
I'm splitting out this change from my GENERIC_IRQ_MULTI_HANDLER
conversion so it can be backported if anyone cares.
Fixes: a71b092a9c68 ("ARM: Convert handle_IRQ to use __handle_domain_irq")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ardb: take +1 offset into account in mask/unmask and init as well]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4036b29a146b2749af3bb213b003eb69f3e5ecc4 ]
Make sure in .probe() to set driver data before the function is left to
make it possible in .remove() to undo the actions done.
This fixes a potential memory leak and stops returning an error code in
.remove() that is ignored by the driver core anyhow.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0092c25b541a5422d7e71892a13c55ee91abc34b ]
This patch fixes the tristate configuration for i2c3 function assigned
to the dtf pins on the Tamonten Tegra20 SoM.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bdf8762da268d2a34abf517c36528413906e9cd5 ]
This patch fixes the kernel warning
"cacheinfo: Unable to detect cache hierarchy for CPU 0"
for the bcm2837 on newer kernel versions.
Signed-off-by: Richard Schleich <rs@noreya.tech>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
[florian: Align and remove comments matching property values]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6f7e221e7a5cfc3299616543fce42b36e631497b ]
IRQ types blindly copied from very similar APQ8064.
Fixes warnings as:
WARNING: CPU: 0 PID: 1 at drivers/irqchip/irq-gic.c:1080 gic_irq_domain_translate+0x118/0x120
...
Tested-by: LogicalErzor <logicalerzor@gmail.com> # boot-tested on Samsung S3
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220108174229.60384-1-david@ixit.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0c6f71176ea43d6f4003a4d57f7bb518c5ad6145 ]
The M53Menlo display unit uses an LVDS-to-DPI bridge, TI DS90CF364A.
Describe this bridge in DT, otherwise the DT incorrectly describes
DPI panel attached directly to LVDS source.
Fixes: 716be61d1869 ("ARM: dts: imx53: Add Menlosystems M53 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3d7e7980993d2c1ae42d3d314040fc2de6a9c45f ]
It seems like sleep_clk was copied from ipq806x.
Fix ipq40xx sleep_clk to the value QSDK defines.
Link: https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-msm/commit/?id=d92ec59973484acc86dd24b67f10f8911b4b4b7d
Link: https://patchwork.kernel.org/comment/22721613/
Fixes: bec6ba4cdf2a ("qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC")
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> (clock-output-names)
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (removed clock rename)
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211220170352.34591-1-chunkeey@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 453a24ded415f7fce0499c6b0a2c7b28f84911f2 upstream.
Add required VDD supplies to HDMI block on SMDK5420. Without them, the
HDMI driver won't probe. Because of lack of schematics, use same
supplies as on Arndale Octa and Odroid XU3 boards (voltage matches).
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220208171823.226211-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 60a9914cb2061ba612a3f14f6ad329912b486360 upstream.
Add required VDD supplies to HDMI block on SMDK5250. Without them, the
HDMI driver won't probe. Because of lack of schematics, use same
supplies as on Arndale 5250 board (voltage matches).
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220208171823.226211-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 372d7027fed43c8570018e124cf78b89523a1f8e upstream.
The gpa1-4 pin was put twice in UART3 pin configuration of Exynos5250,
instead of proper pin gpa1-5.
Fixes: f8bfe2b050f3 ("ARM: dts: add pin state information in client nodes for Exynos5 platforms")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20211230195325.328220-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0fb578a529ac7aca326a9fa475b4a6f58a756fda upstream.
PMERRLOC resource size was set to 0x100, which resulted in HSMC_ERRLOCx
register being truncated to offset x = 21, causing error correction to
fail if more than 22 bit errors and if 24 or 32 bit error correction
was supported.
Fixes: d9c41bf30cf8 ("ARM: dts: at91: Declare EBI/NAND controllers")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: <stable@vger.kernel.org> # 4.13.x
Acked-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220111132301.906712-1-tudor.ambarus@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3916c3619599a3970d3e6f98fb430b7c46266ada ]
crypto-controller had a typo, fix it.
In the same time, rename it to just crypto
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220209120355.1985707-1-clabbe@baylibre.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be4e65bdffab5f588044325117df77dad7e9c45a ]
The binding specifies the clock order to "iahb", "isfr", "cec". Reorder
the clocks accordingly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220210142353.3420859-1-s.hauer@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a5905d6af492ee6a4a2205f0d550b3f931b03d03 upstream.
KVM allows the guest to discover whether the ARCH_WORKAROUND SMCCC are
implemented, and to preserve that state during migration through its
firmware register interface.
Add the necessary boiler plate for SMCCC_ARCH_WORKAROUND_3.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[ kvm code moved to virt/kvm/arm. ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6c7cb60bff7aec24b834343ff433125f469886a3 upstream.
When building for Thumb2, the vectors make use of a local label. Sadly,
the Spectre BHB code also uses a local label with the same number which
results in the Thumb2 reference pointing at the wrong place. Fix this
by changing the number used for the Spectre BHB local label.
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 68453767131a5deec1e8f9ac92a9042f929e585d upstream.
When CONFIG_GENERIC_CPU_VULNERABILITIES is not set, references
to spectre_v2_update_state() cause a build error, so provide an
empty stub for that function when the Kconfig option is not set.
Fixes this build error:
arm-linux-gnueabi-ld: arch/arm/mm/proc-v7-bugs.o: in function `cpu_v7_bugs_init':
proc-v7-bugs.c:(.text+0x52): undefined reference to `spectre_v2_update_state'
arm-linux-gnueabi-ld: proc-v7-bugs.c:(.text+0x82): undefined reference to `spectre_v2_update_state'
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2f6edb6bcb2f3f41d876e0eba2ba97f87a0296ea ]
Requesting quad mode for the FMC resulted in an error:
&fmc {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fwqspi_default>'
[ 0.742963] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: invalid function FWQSPID in map table

This is because the quad mode pins are a group of pins, not a function.
After applying this patch we can request the pins and the QSPI data
lines are muxed:
# cat /sys/kernel/debug/pinctrl/1e6e2000.syscon\:pinctrl-aspeed-g6-pinctrl/pinmux-pins |grep 1e620000.spi
pin 196 (AE12): device 1e620000.spi function FWSPID group FWQSPID
pin 197 (AF12): device 1e620000.spi function FWSPID group FWQSPID
pin 240 (Y1): device 1e620000.spi function FWSPID group FWQSPID
pin 241 (Y2): device 1e620000.spi function FWSPID group FWQSPID
pin 242 (Y3): device 1e620000.spi function FWSPID group FWQSPID
pin 243 (Y4): device 1e620000.spi function FWSPID group FWQSPID
Fixes: f510f04c8c83 ("ARM: dts: aspeed: Add AST2600 pinmux nodes")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b1a384d2cbccb1eb3f84765020d25e2c1929706e upstream.
The kernel test robot discovered that building without
HARDEN_BRANCH_PREDICTOR issues a warning due to a missing
argument to pr_info().
Add the missing argument.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9dd78194a372 ("ARM: report Spectre v2 status through sysfs")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 36168e387fa7d0f1fe0cd5cf76c8cea7aee714fa upstream.
ld.lld does not support the NOCROSSREFS directive at the moment, which
breaks the build after commit b9baf5c8c5c3 ("ARM: Spectre-BHB
workaround"):
ld.lld: error: ./arch/arm/kernel/vmlinux.lds:34: AT expected, but got NOCROSSREFS
Support for this directive will eventually be implemented, at which
point a version check can be added. To avoid breaking the build in the
meantime, just define NOCROSSREFS to nothing when using ld.lld, with a
link to the issue for tracking.
Cc: stable@vger.kernel.org
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Link: https://github.com/ClangBuiltLinux/linux/issues/1609
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 33970b031dc4653cc9dc80f2886976706c4c8ef1 upstream.
In the recent Spectre BHB patches, there was a typo that is only
exposed in certain configurations: mcr p15,0,XX,c7,r5,4 should have
been mcr p15,0,XX,c7,c5,4
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 330f4c53d3c2d8b11d86ec03a964b86dc81452f5 upstream.
It was missing a semicolon.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 25875aa71dfe ("ARM: include unprivileged BPF status in Spectre V2 reporting").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 25875aa71dfefd1959f07e626c4d285b88b27ac2 upstream.
The mitigations for Spectre-BHB are only applied when an exception
is taken, but when unprivileged BPF is enabled, userspace can
load BPF programs that can be used to exploit the problem.
When unprivileged BPF is enabled, report the vulnerable status via
the spectre_v2 sysfs file.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9baf5c8c5c356757f4f9d8180b5e9d234065bc3 upstream.
Workaround the Spectre BHB issues for Cortex-A15, Cortex-A57,
Cortex-A72, Cortex-A73 and Cortex-A75. We also include Brahma B15 as
well to be safe, which is affected by Spectre V2 in the same ways as
Cortex-A15.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[changes due to lack of SYSTEM_FREEING_INITMEM - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d9d651ff2270a632e9dc497b142db31e8911315 upstream.
Use the linker's LOADADDR() macro to get the load address of the
sections, and provide a macro to set the start and end symbols.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 04e91b7324760a377a725e218b5ee783826d30f5 upstream.
Provide a couple of helpers to copy the vectors and stubs, and also
to flush the copied vectors and stubs.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9dd78194a3722fa6712192cdd4f7032d45112a9a upstream.
As per other architectures, add support for reporting the Spectre
vulnerability status via sysfs CPU.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[ preserve res variable - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7b83299e5b9385943a857d59e15cba270df20d7e upstream.
early_param() handlers should return 0 on success.
__setup() handlers should return 1 on success, i.e., the parameter
has been handled. A return of 0 would cause the "option=value" string
to be added to init's environment strings, polluting it.
../arch/arm/mm/mmu.c: In function 'test_early_cachepolicy':
../arch/arm/mm/mmu.c:215:1: error: no return statement in function returning non-void [-Werror=return-type]
../arch/arm/mm/mmu.c: In function 'test_noalign_setup':
../arch/arm/mm/mmu.c:221:1: error: no return statement in function returning non-void [-Werror=return-type]
Fixes: b849a60e0903 ("ARM: make cr_alignment read-only #ifndef CONFIG_CPU_CP15")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d920eaa4c4559f59be7b4c2d26fa0a2e1aaa3da9 upstream.
The kgdb code needs to register an undef hook for the Thumb UDF
instruction that will fault in order to be functional on Thumb2
platforms.
Reported-by: Johannes Stezenbach <js@sig21.net>
Tested-by: Johannes Stezenbach <js@sig21.net>
Fixes: 5cbad0ebf45c ("kgdb: support for ARCH=arm")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 34596ba380b03d181e24efd50e2f21045bde3696 ]
This was found by coccicheck:
./arch/arm/mach-omap2/display.c, 272, 1-7, ERROR missing put_device;
call of_find_device_by_node on line 258, but without a corresponding
object release within this function.
Move the put_device() call before the if judgment.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 80c469a0a03763f814715f3d12b6f3964c7423e8 ]
Fix following coccicheck warning:
./arch/arm/mach-omap2/omap_hwmod.c:753:1-23: WARNING: Function
for_each_matching_node should have of_node_put() before break
Early exits from for_each_matching_node should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
