summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf527/boards/ezkit.c
AgeCommit message (Collapse)Author
2010-08-27Blackfin: bf52x/bf54x boards: drop unused nand page sizeBarry Song
Now that the driver for the Blackfin on-chip NFC no longer uses/respects the page_size from the platform resources (figures out the needs on the fly), drop it from the platform resources. This fixes some build errors since the defines no longer exists. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21Blackfin: mark MUSB VRSEL as active high for appropriate boardsCliff Cai
These boards all have the GPIO VRSEL hooked up as an active high. Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: rename AD1836 to AD183X in board filesBarry Song
The ASoC codec driver was generalized and renamed, so update the board resources accordingly. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf537-stamp/bf527-ezkit: move ASoC SPORT resources to boards fileBarry Song
Rather than declaring pin resources in the drivers, do it in the board. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf527-ezkit/bf537-stamp: add example SSM2602 I2C resourcesCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: drop unused SL811 platform resources from bf527/pnav boardsMike Frysinger
These platforms don't hook up to this USB controller, so no point in declaring resources for it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: update AD7879 resources to match the new gpiolib driver supportMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: extend bfin-lq035q1-fb resources to include PPI modeMichael Hennerich
This lets us support the new BF527-EZKIT V2.1 via platform resources tweaks only. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf527-ezkit: add support for V2.1 boardsMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: add UART/SPORT early platform resourcesSonic Zhang
This lets people easily select the UART/SPORT consoles for early printk while leveraging the pins declared in the boards file. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: move SPORT UART resources to boards filesSonic Zhang
Rather than keeping the pins in the actual driver and worrying about a mess of Kconfig options, declare all the desired pin resources in the boards file. This lets people easily select the specific pins/ports for the normal emulated UART as well as GPIOs for CTS/RTS. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: move on-chip UART resources to boards filesSonic Zhang
Rather than keeping the pins in the actual driver and worrying about a mess of Kconfig options, declare all the desired pin resources in the boards file. This lets people easily select the specific pins/ports for the normal UART as well as GPIOs for CTS/RTS. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: fix typo in isp1760 platform nameMichael Hennerich
The driver changed from "isp1760-hcd" to "isp1760", so update resources to match. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: update bfin_rotary definesMichael Hennerich
The driver was moved during the merge process, so update the defines to match the new location. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: clean up isp1362 board resourcesMike Frysinger
Drop the CONFIG_USB_ISP1362_BFIN_GPIO_IRQ Kconfig as it never made it into mainline and it was a bad interface into the board resources. For boards that actually used this, replace it with an actual IRQ define. For boards that didn't, simply drop the resources. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: clean up bf537-lq035 board resourcesMichael Hennerich
Now that the driver has been updated, convert the board resources to the new i2c framework for managing slaves. For boards that don't actually hook up to this hardware, simply drop the resources altogether. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08Blackfin: drop all simple-gpio board resourcesMike Frysinger
The simple-gpio has been replaced by the gpio sysfs interface, so drop the unused simple-gpio resources from all Blackfin boards. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08Blackfin: convert adv7393 resources to new i2c frameworkMichael Hennerich
Now that the driver has been updated, convert the board resources to the new i2c framework for managing slaves. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: mass clean up of copyright/licensing infoRobin Getz
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: delete '-spi' suffix in ad1836/ad1938 driver nameBarry Song
The ASoC drivers have dropped the redundant "-spi" suffix in the driver name, so update the board resources accordingly. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: drop board resources for dead devices (pbx/ad9960)Mike Frysinger
These hardware devices are dead and the drivers never cleaned up/merged, so punt the useless board resource info. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: convert boards to use platform data with smc91xMichael Hennerich
Latest smc91x driver allows you to specify settings in board resources rather than needing CONFIG_BLACKFIN in the drivers/net/smc91x.h header. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: rename PCF8574 driver configMichael Hennerich
The "TWI_KEYPAD" driver was renamed to "INPUT_PCF8574", so update the defines in the board resources accordingly. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16Blackfin: fix incomplete renaming of the bfin-twi-lcd driverMichael Hennerich
The sed used to rename the bfin-twi-lcd only replaced the first instance rather than all which led to the resources not being enabled when the driver was built as a module. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: drop unused ISP1760 port1_disable from board resourcesMike Frysinger
The port1 disable stuff was dropped from the USB ISP1760, so update the Blackfin boards accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: define SPI IRQ in board resourcesYi Li
The Blackfin SPI driver can be driven by an IRQ now, so declare it in the board resources. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: rename some Blackfin driversMike Frysinger
Try to keep the naming conventions consistent, so: SPI_ADC_BF533 -> BFIN_SPI_ADC TWI_LCD -> BFIN_TWI_LCD Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: bf527-ezkit: add support for mmc-spiYi Li
Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver ↵Graf Yang
platform resources to board files Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: fixup board init function nameMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefsMike Frysinger
Drop CONFIG_I2C_BOARDINFO ifdefs as the common i2c header handles this already by stubbing things out Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrdSonic Zhang
[Mike Frysinger <vapier.adi@gmail.com>: - setup P_DEFAULT_BOOT_SPI_CS for every arch based on the default bootrom behavior and convert all our boards to it - revert previous anomaly change ... bf51x is not affected by anomaly 05000353] Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Add AD7879 defaults for the Blackfin Landscape LCD EZ-ExtenderMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Fix bug - wrong endpoint number and dma channels of USBBryan Wu
Blackfin MUSB has 8 endpoints including ep0 and 8 dma channels not 7 Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Modify bfin_sir device configuration to board fileGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Retire old spi_mmc driverYi Li
Turn to use the mmc_spi driver in mainline kernel. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: make ADI board names consistentMike Frysinger
Cc: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: Enable ISP1760 USB Host Driver in platform device ↵Michael Hennerich
initialization code. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: add BF54x / BF52x Rotary Input device driver platform ↵Michael Hennerich
resource to board file Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-13Blackfin arch: only include asm/cplb.h when it is truly usedMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: use new platform data interface of musb to replace old oneBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-05Blackfin arch: remove pata resources from generic boardMike Frysinger
these are highly board specific, so putting into generic doesnt make much sense Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-05Blackfin arch: be consistant with parition names, and ensure the bus is ↵Robin Getz
identified Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-06-24DM9000: Fixup blackfin after removing 2 resource usageLaurent Pinchart
The dm9000 driver accepts either 2 or 3 resources to describe the platform devices. The 2 resources case abuses the ioresource mechanism by passing ioremap()ed memory through the platform device resources. This patch removes converts boards that were using it to the 3 resources scheme. CC: Bryan Wu <cooloney@kernel.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-07Blackfin arch: protect only the SPI bus controller with CONFIG_SPI_BFINMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-31Blackfin arch: Fix bug - set corret SSEL and IRQ to enable AD7877 on BF527Bryan Wu
AD7877 use SSEL_2 (P9.9) and IRQ_PF8 (P9.14) on BF527 - populating JP3 to enable STAMP - disable SW11.2 to disconnect SSEL_2/PF12 from Rotary NAND - disable SW18.1 to disconnect SSEL_2 from MAX1233 touchscreen chip Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-18i2c: Clean up Blackfin BF527 I2C device declarationsJean Delvare
I2C_BOARD_INFO() now sets the type field so no need to set it separatetly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Bryan Wu <cooloney@kernel.org>
2008-05-07[Blackfin] arch: Set spi flash partition on bf527 as like bf548.Grace Pan
Signed-off-by: Grace Pan <grace.pan@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07[Blackfin] arch: Fix BUG - spi flash on bf527 ezkit would fail at mountMichael Hennerich
BF527-EZKit features 16MBit M25P16 flash Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07[Blackfin] arch: add twi_lcd and twi_keypad i2c board info to bf527-ezkitBryan Wu
- JP3 should be installed for STAMP enable - IRQ for twi_keypad driver is IRQ_PF8 Signed-off-by: Bryan Wu <cooloney@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-15 05:16:17 +0000