summaryrefslogtreecommitdiff
path: root/arch/powerpc/configs/mpc85xx_defconfig
AgeCommit message (Collapse)Author
2015-08-07powerpc/85xx: Use kconfig fragmentsScott Wood
Unify mpc85xx and corenet configs using fragments, to ease maintenance and avoid the sort of drift that the previous patch fixed. Hardware and software options are separated, with the hope that other embedded platforms could share the software options, and to make it easier to maintain custom/alternate configs that focus on either hardware or software options. Due to the previous patch, this patch should not affect the results of any of the affected defconfigs -- only how those results are achieved. The resulting config is more or less the union of the options that any of the configs previously selected. No attempt was made in this (or the previous) patch to edit out questionable options, but this patch will make it easier to do so in future patches. Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-08-07powerpc/85xx: Make defconfigs consistentScott Wood
The mpc85xx and corenet configs have many differences between them that can't be explained by the target hardware of each config. The next patch will consolidate these targets using kconfig fragments; this patch shows what the resulting defconfigs will look like (generated by using savedefconfig on a fragment-generated config). Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-03-23powerpc: Enable thermal monitor feature in defconfig for supported platformsHongtao Jia
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-01-29powerpc/85xx: Add support for Emerson/Artesyn MVME2500.Alessio Igor Bogani
Add support for the Artesyn MVME2500 Single Board Computer. The MVME2500 is a 6U form factor VME64 computer with: - A single Freescale QorIQ P2010 CPU - 1 GB of DDR3 onboard memory - Three Gigabit Ethernets - Five 16550 compatible UARTS - One USB 2.0 port, one SHDC socket and one SATA connector - One PCI/PCI eXpress Mezzanine Card (PMC/XMC) Slot - MultiProcessor Interrupt Controller (MPIC) - A DS1375T Real Time Clock (RTC) and 512 KB of Non-Volatile Memory - Two 64 KB EEPROMs - U-Boot in 16 SPI Flash This patch is based on linux-3.18 and has been boot tested. Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-01-20powerpc: Update all configs using savedefconfigMichael Ellerman
It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-17powerpc/config: Enable memory driverPrabhakar Kushwaha
As Freescale IFC controller has been moved to driver to driver/memory. So enable memory driver in powerpc config Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-09-19powerpc/85xx/defconfig: Remove duplicate CONFIG_RTC_DRV_DS1307Scott Wood
Commit a95e8c28b3dc "powerpc/defconfig: update RTC support" duplicated the CONFIG_RTC_DRV_DS1307 symbol in mpc85xx_defconfig and mpc85xx_smp_defconfig, resulting in this: arch/powerpc/configs/mpc85xx_smp_defconfig:217:warning: override: reassigning to symbol RTC_DRV_DS1307 Fixes: a95e8c28b3dc "powerpc/defconfig: update RTC support" Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-09-03powerpc: configs: Add VFAT file-system configsNikhil Badola
Add CONFIG_NLS_CODEPAGE_437, CONFIG_NLS_CODEPAGE_850, CONFIG_NLS_ISO8859_1 in default configs for 85xx and 86xx socs. Required for mounting vfat file-systems on USB devices Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-06-20powerpc/defconfig: update RTC supportShengzhou Liu
- remove CONFIG_RTC_DRV_CMOS in corenet32_smp_defconfig(it's unused), reserve CONFIG_RTC_DRV_CMOS in mpc85xx_defconfig(needed on some CDS boards) - enable CONFIG_RTC_DRV_DS1307, CONFIG_RTC_DRV_DS1374, CONFIG_RTC_DRV_DS3232 in mpc85xx_defconfig, mpc85xx_smp_defconfig - enable RTC support in corenet64_smp_defconfig Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-05-22powerpc/mpc85xx: Remove P1023 RDS supportLijun Pan
P1023RDS is no longer supported/manufactured by Freescale while P1023RDB is. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-03-19powerpc/config: Remove unnecssary CONFIG_FSL_IFCPrabhakar Kushwaha
CONFIG_FSL_IFC gets enabled by Kconfig dependancies. So remove unnecssary define from the defconfigs Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-03-07powerpc: : Kill CONFIG_MTD_PARTITIONS송은봉
This patch removes CONFIG_MTD_PARTITIONS in config files for powerpc. Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b22b10f1560d5f90aded4a54234b9b2724. Signed-off-by: Eunbong Song <eunb.song@samsung.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-07powerpc/85xx: Merge 85xx/p1023_defconfig into mpc85xx_smp and mpc85xxLijun Pan
mpc85xx_smp_defconfig and mpc85xx_defconfig already have CONFIG_P1023RDS=y. Merge CONFIG_P1023RDB=y and other relevant configurations into mpc85xx_smp_defconfig and mpc85_defconfig. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/fsl/defconfig: enable CONFIG_AT803X_PHYShengzhou Liu
Enable CONFIG_AT803X_PHY to support AR8030/8033/8035 PHY. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-23powerpc/85xx: Add C293PCIE board supportMingkai Hu
C293PCIE board is a series of Freescale PCIe add-in cards to perform as public key crypto accelerator or secure key management module. - 512KB platform SRAM in addition to 512K L2 Cache/SRAM - 512MB soldered DDR3 32bit memory - CPLD System Logic - 64MB x16 NOR flash and 4GB x8 NAND flash - 16MB SPI flash Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-07powerpc/fsl: Enable CONFIG_DEVTMPFS_MOUNT so /dev can be mounted correctlyZhenhua Luo
When using recent udev, the /dev node mount requires CONFIG_DEVTMPFS_MOUNT is enabled in Kernel. The patch enables the option in defconfig of Freescale QorIQ targets. Changed defconfig list: arch/powerpc/configs/85xx/p1023rds_defconfig arch/powerpc/configs/corenet32_smp_defconfig arch/powerpc/configs/corenet64_smp_defconfig arch/powerpc/configs/mpc85xx_smp_defconfig arch/powerpc/configs/mpc85xx_defconfig arch/powerpc/configs/mpc83xx_defconfig Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> [scottwood@freescale.com: added mpc83xx and non-smp mpc85xx] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-04-11powerpc/85xx: enable Silicon image 3132 PCIe to SATA controllerRoy ZANG
Some 85xx board, for example, P1020RDB-PC has on board silicon image PCIe to SATA controller and when booting up, the filesystem will auto mount to the SATA disk. So enable silicon image 3132 pcie to sata controller by default Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-18powerpc: add CONFIG(s) require for using flash controllerPrabhakar Kushwaha
Add CONFIG(s) required for NAND and NOR flash controller usage. It defines MTD, Jffs2 and UBIFS file system required for controllers. It also enables IFC controller Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-15powerpc/85xx: enable E1000 NIC to mpc85xx_defconfigRoy Zang
E1000 NIC is a common used Ethernet card. Enable it as default for mpc85xx platform. other change is due to make savedefconfig Reported-by: Fu Jiwei <b36666@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/85xx: introduce support for the Freescale / iVeia P1022RDKTimur Tabi
The Freescale / iVeia P1022RDK reference board is a small-factor board with a Freescale P1022 SOC. It includes: 1) 512 MB 64-bit DDR3-800 (max) memory 2) 8MB SPI serial flash memory for boot loader 3) Bootable 4-bit SD/MMC port 4) Two 10/100/1000 Ethernet connectors 5) One SATA port 6) Two USB ports 7) One PCIe x4 slot 8) DVI video connector 9) Audio input and output jacks, powered by a Wolfson WM8960 codec. Unlike the P1022DS, the P1022RDK does not have any localbus devices, presumably because of the localbus / DIU multiplexing restriction of the P1022 SOC. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-23powerpc/fsl: fix "Failed to mount /dev: No such device" errorsKim Phillips
Yocto (Built by Poky 7.0) 1.2 root filesystems fail to boot, at least over nfs, with: Failed to mount /dev: No such device Configuring DEVTMPFS fixes it. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-23powerpc/fsl: update defconfigsKim Phillips
run make savedefconfig on fsl defconfigs. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-10powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDSZhao Chenhui
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfigShengzhou Liu
Enable MTD/NOR/NAND options by default in mpc85xx_defconfig and mpc85xx_smp_defconfig to support NOR, NAND flash. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-04-09Merge tag 'v3.4-rc2' into for-3.5Mark Brown
Linux 3.4-rc2 contains some bug fixes we need, including the addition of an export for regcache_sync_region().
2012-04-02Merge remote-tracking branch 'kumar/next' into mergeBenjamin Herrenschmidt
2012-04-01ASoC: imx: merge sound/soc/imx into sound/soc/fslShawn Guo
Freescale PowerPC and ARM/IMX families share the same SSI IP block. The patch merges sound/soc/imx into sound/soc/fsl, so that the possible code sharing and consolidation can happen. This is a plain merge, except that menuconfig SND_POWERPC_SOC is added in Kconfig for PowerPC platform as a correspondence to SND_IMX_SOC for IMX platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-29irqdomain/powerpc: updated defconfigs for VIRQ_DEBUG renameGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-29powerpc/85xx: Enable I2C_CHARDEV and I2C_MPC options in defconfigsShaveta Leekha
Enable I2C char dev interface for user space testing of I2C controler. Enable the I2C driver on 64-bit builds (corenet64_smp_defconfig) as it was missing. Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16powerpc/85xx: allow CONFIG_PHYS_64BIT to be selectableTimur Tabi
Remove the "select PHYS_64BIT" from the Kconfig entry for the P1022DS, so that large physical address support is a selectable option for non-CoreNet reference boards. The option is enabled in mpc85xx_[smp_]defconfig so that the default is unchanged. However, now it can be deselected. The P1022DS had this option defined because the default device tree for this board uses 36-bit addresses. This had the side-effect of forcing this option on for all boards that use mpc85xx_[smp_]defconfig. Some users may want to disable this feature to create an optimized configuration for boards with <= 2GB of RAM. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-01-04powerpc/fsl: Update defconfigs to enable some standard FSL HW featuresKumar Gala
corenet64_smp_defconfig: - enabled rapidio corenet32_smp_defconfig: - enabled hugetlbfs, rapidio mpc85xx_smp_defconfig: - enabled P1010RDB, hugetlbfs, SPI, SDHC, Crypto/CAAM mpc85xx_smp_defconfig: - enabled hugetlbfs, SPI, SDHC, Crypto/CAAM Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-12-07powerpc: Enable Hugetlb by default for 32-bit 85xx/corenetBecky Bruce
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-10-11powerpc: Update mpc85xx/corenet 32-bit defconfigsBecky Bruce
Results from updates via make savedefconfig. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-09-23gpio: move mpc8xxx/512x gpio driver to drivers/gpioWolfram Sang
Move the driver to the place where it is expected to be nowadays. Also rename its CONFIG-name to match the rest and adapt the defconfigs. Finally, move selection of REQUIRE_GPIOLIB or WANTS_OPTIONAL_GPIOLIB to the platforms, because this option is per-platform and not per-driver. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-08-30powerpc/85xx: enable the audio drivers in the defconfigsTimur Tabi
Enable the audio drivers in the non-corenet 85xx defconfigs so that audio is enabled on the Freescale P1022DS reference board. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-27powerpc/85xx: Add P1010RDB board supportPrabhakar Kushwaha
P1010RDB Overview ----------------- 1Gbyte DDR3 (on board DDR) 32Mbyte 16bit NOR flash 32Mbyte SLC NAND Flash 256 Kbit M24256 I2C EEPROM 128 Mbit SPI Flash memory I2C Board 128x8 bit memory SD/MMC connector to interface with the SD memory card 2 SATA interface 1 internal SATA connect to 2.5. 160G SATA2 HDD 1 eSATA connector to rear panel USB 2.0 x1 USB 2.0 port: connected via a UTMI PHY to Mini-AB interface. x1 USB 2.0 port: directly connected to Mini-AB interface Ethernet eTSEC1: Connected to RGMII PHY VSC8641XKO eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY VSC8221 eCAN Two DB-9 female connectors for Field bus interface UART DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-27powerpc/85xx: enable the framebuffer console for the defconfigsTimur Tabi
Enable framebuffer console support by default in the defconfigs for the Freescale 85xx-based reference board. This allows the boot messages to be shown on the video display on the P1022DS. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-22powerpc/85xx: Add basic P1023RDS board supportRoy Zang
The P1023 processor is an e500v2 based SoC that utilizes the DPAA networking architecture. This adds basic board support for non-DPAA functionality (device tree, board file, etc). Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19powerpc/fsl: enable verbose bug outputScott Wood
This debug option has no overhead other than a slight increase in kernel size, and makes bug reports more useful. While some end users may prefer to save the space, as a default on a kernel config aimed primarily at development on reference boards, it should be enabled. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-03-30powerpc: Restore some misc devices to our configsStephen Rothwell
Uwe Kleine-König reported: while working on an defconfig (arm/mx27) I noticed that just updating it[1] results in removing CONFIG_EEPROM_AT24=y. The reason is that since commit v2.6.36-5965-g5f2365d (misc devices: do not enable by default) MISC_DEVICES isn't enabled anymore by default. So all defconfigs that have CONFIG_SOME_SYMBOL=y (or =m) (with SOME_SYMBOL depending on MISC_DEVICES) but not CONFIG_MISC_DEVICES=y suffer from the same problem. This restores those misc devices to the powerpc defconfigs. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Uwe Kleine-König Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-14powerpc/85xx: add DIU support to the Freecale P1022DS reference boardTimur Tabi
The Freescale P1022DS has an on-chip video controller called the DIU, and a driver for this device already exists. Update the platform file for the P1022DS reference board to enable the driver, and update the defconfig for Freescale MPC85xx boards to add the driver. [Edited to resolve header add/add conflict and drop #define DEBUG. -- broonie] Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-09powerpc: Trim defconfigsBenjamin Herrenschmidt
This trims all our defconfigs using make savedefconfig Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-04powerpc/85xx: Introduce support for the Freescale P1022DS reference boardTimur Tabi
Introduce basic support for the Freescale P1022DS reference board, based on the Freescale BSP for this board. This patch excludes the DIU, SSI, and MMC/SD drivers. Only a 36-bit DTS is provided. Update mpc86xx_smp_defconfig and mpc85xx_defconfig to support the P1022DS. This means enabling 64-bit physical address support, increasing the maximum zone order to 12 (to allow the DIU driver to allocate large chunks), and clean up the audio options to disable the deprecated OSS support. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-19powerpc: 2.6.34 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxxKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-19powerpc/mpc8xxx defconfigs - turn off SYSFS_DEPRECATEDKim Phillips
a recent fc11 udev update on an 83xx board made root console login disappear: Updating : udev-141-8.fc11.ppc 32/83 udev: starting version 141 udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly and sure enough, turning off SYSFS_DEPRECATED brings the login prompt back. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-06powerpc: 2.6.33 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxxKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-05powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxxKumar Gala
Updated mpc85xx_{smp_}defconfig to enable: * XES_MPC85xx board * PCI MSI * RapidIO Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-05powerpc/8xxx: enable IPsec ESP by default on mpc83xx/mpc85xxKim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-24powerpc/85xx: Add support for P2020RDB boardPoonam Aggrwal
Add support for the P2020RDB reference board from Freescale. Overview of P2020RDB platform - DDR DDR2 1G - NOR Flash 16MByte - NAND Flash 32MByte - 3 Ethernet interfaces 1) etSEC1 - RGMII - connected to a 5 port Vitesse Switch(VSC7385) - Switch is memory mapped through eLBC interface(CS#2) - IRQ1 2) etSEC2 - SGMII - connected to VSC8221 - IRQ2 3) etSEC3 - RGMII - connected to VSC8641 - IRQ3 - 2 1X PCIe interfaces - SD/MMC ,USB - SPI EEPROM - Serial I2C EEPROM Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-26 20:11:18 +0000