summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/eeh.c
AgeCommit message (Collapse)Author
2014-10-15powerpc/eeh: Don't collect logs on PE with blocked config spaceGavin Shan
When the PE's config space is marked as blocked, PCI config read requests always return 0xFF's. It's pointless to collect logs in this case. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-15powerpc/eeh: Rename flag EEH_PE_RESET to EEH_PE_CFG_BLOCKEDGavin Shan
The flag EEH_PE_RESET indicates blocking config space of the PE during reset time. We potentially need block PE's config space other than reset time. So it's reasonable to replace it with EEH_PE_CFG_BLOCKED to indicate its usage. There are no substantial code or logic changes in this patch. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30powerpc/eeh: Dump PCI config space for all child devicesGavin Shan
The PEs can be organized as nested. Current implementation doesn't dump PCI config space for subordinate devices of child PEs. However, the frozen PE could be caused by those subordinate devices of its child PEs. The patch dumps PCI config space for all subordinate devices of the problematic PE. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30powerpc/eeh: Emulate EEH recovery for VFIO devicesGavin Shan
When enabling EEH functionality on passed through devices (PE) with VFIO, the devices in the PE would be removed permanently from guest side. In that case, the PE remains frozen state. When returning PE to host, or restarting the guest again, we had mechanism unfreezing the PE by clearing PESTA/B frozen bits. However, that's not enough for some adapters, which are indicated as following "lspci" shows. Those adapters require hot reset on the parent bus to bring their firmware back to workable state. Otherwise, those adaptrs won't be operative and the host (for returning case) or the guest will fail to load the drivers for those adapters without exception. 0000:01:00.0 Ethernet controller: Emulex Corporation OneConnect \ 10Gb NIC (be3) (rev 02) 0000:01:00.0 0200: 19a2:0710 (rev 02) 0001:03:00.0 Ethernet controller: Emulex Corporation OneConnect \ NIC (Lancer) (rev 10) 0001:03:00.0 0200: 10df:e220 (rev 10) The patch adds mechanism to emulate EEH recovery (for hot reset on parent PCI bus) on 3 gates to fix the issue: open/release one adapter of the PE, enable EEH functionality on one adapter of the PE. Reported-by: Murilo Fossa Vicentini <muvic@br.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30powerpc/eeh: Tag reset state for user owned PEGavin Shan
PE would be owned by userland, which probably request PE reset done in host side. During the reset, we should drop the PCI config accesses to the PE with help of flag EEH_PE_RESET. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30powerpc/eeh: Block PCI config access during resetGavin Shan
Function pcibios_set_pcie_reset_state() can be used to do PCI reset. PCI config access during the reset usually causes EEH errors unexpectedly. In order to avoid the EEH error, the patch blocks PCI config access during reset with the help of flag EEH_PE_RESET, which is similar to what we did in EEH PE reset path. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30powerpc/eeh: Use eeh_unfreeze_pe()Gavin Shan
The patch uses eeh_unfreeze_pe() to replace the logic clearing frozen IO and DMA, in order to simplify the code. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30powerpc/eeh: Unfreeze PE on enabling EEH functionalityGavin Shan
When passing through PE to guest, that's possibly in frozen state. The driver for the pass-through devices on guest side can't be loaded successfully as reported. We already had one gate in eeh_dev_open() to clear PE frozen state accordingly, but that's not enough because the function is only called at QEMU startup for once. The patch adds another gate in eeh_pe_set_option() so that the PE frozen state can be cleared at QEMU restart time. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30powerpc/eeh: Fix improper condition in eeh_pci_enable()Gavin Shan
The function eeh_pci_enable() is called to apply various requests to one particular PE: Enabling EEH, Disabling EEH, Enabling IO, Enabling DMA, Freezing PE. When enabling IO or DMA on one specific PE, we need check that IO or DMA isn't enabled previously. But the condition used to do the check isn't completely correct because one PE would be in DMA frozen state with workable IO path, or vice versa. The patch fixes the improper condition. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30powerpc/eeh: Clear frozen state on passing deviceGavin Shan
When passing through device, its PE might have been put into frozen state. One obvious example would be: the passed PE is forced to be offline because of hitting maximal allowed EEH errors in userland. In that case, the frozen state won't be cleared and then the PE is returned back to host, which might not have chance detecting and recovering from it. The patch adds more check when passing through device and clear the PE frozen state if necessary. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30powerpc/eeh: Reenable PCI devices after resetGavin Shan
The PCI devices that have been passed through are enabled before reset, we need restore to the enabled state after reset. Otherwise, MMIO access might be issued to disabled devices after reset and causes exceptional recursive EEH error. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30powerpc/eeh: Freeze PE before PE resetGavin Shan
The patch adds one more option (EEH_OPT_FREEZE_PE) to set_option() method to proactively freeze PE, which will be issued before resetting pass-throughed PE to drop MMIO access during reset because it's always contributing to recursive EEH error. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30powerpc/eeh: Drop unused argument in eeh_check_failure()Gavin Shan
eeh_check_failure() is used to check frozen state of the PE which owns the indicated I/O address. The argument "val" of the function isn't used. The patch drops it and return the frozen state of the PE as expected. Cc: Vishal Mansur <vmansur@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-25powerpc/eeh: Fix kernel crash when passing through VFWei Yang
When doing vfio passthrough a VF, the kernel will crash with following message: [ 442.656459] Unable to handle kernel paging request for data at address 0x00000060 [ 442.656593] Faulting instruction address: 0xc000000000038b88 [ 442.656706] Oops: Kernel access of bad area, sig: 11 [#1] [ 442.656798] SMP NR_CPUS=1024 NUMA PowerNV [ 442.656890] Modules linked in: vfio_pci mlx4_core nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT xt_conntrack bnep bluetooth rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw tg3 nfsd be2net nfs_acl ses lockd ptp enclosure pps_core kvm_hv kvm_pr shpchp binfmt_misc kvm sunrpc uinput lpfc scsi_transport_fc ipr scsi_tgt [last unloaded: mlx4_core] [ 442.658152] CPU: 40 PID: 14948 Comm: qemu-system-ppc Not tainted 3.10.42yw-pkvm+ #37 [ 442.658219] task: c000000f7e2a9a00 ti: c000000f6dc3c000 task.ti: c000000f6dc3c000 [ 442.658287] NIP: c000000000038b88 LR: c0000000004435a8 CTR: c000000000455bc0 [ 442.658352] REGS: c000000f6dc3f580 TRAP: 0300 Not tainted (3.10.42yw-pkvm+) [ 442.658419] MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR: 28004882 XER: 20000000 [ 442.658577] CFAR: c00000000000908c DAR: 0000000000000060 DSISR: 40000000 SOFTE: 1 GPR00: c0000000004435a8 c000000f6dc3f800 c0000000012b1c10 c00000000da24000 GPR04: 0000000000000003 0000000000001004 00000000000015b3 000000000000ffff GPR08: c00000000127f5d8 0000000000000000 000000000000ffff 0000000000000000 GPR12: c000000000068078 c00000000fdd6800 000001003c320c80 000001003c3607f0 GPR16: 0000000000000001 00000000105480c8 000000001055aaa8 000001003c31ab18 GPR20: 000001003c10fb40 000001003c360ae8 000000001063bcf0 000000001063bdb0 GPR24: 000001003c15ed70 0000000010548f40 c000001fe5514c88 c000001fe5514cb0 GPR28: c00000000da24000 0000000000000000 c00000000da24000 0000000000000003 [ 442.659471] NIP [c000000000038b88] .pcibios_set_pcie_reset_state+0x28/0x130 [ 442.659530] LR [c0000000004435a8] .pci_set_pcie_reset_state+0x28/0x40 [ 442.659585] Call Trace: [ 442.659610] [c000000f6dc3f800] [00000000000719e0] 0x719e0 (unreliable) [ 442.659677] [c000000f6dc3f880] [c0000000004435a8] .pci_set_pcie_reset_state+0x28/0x40 [ 442.659757] [c000000f6dc3f900] [c000000000455bf8] .reset_fundamental+0x38/0x80 [ 442.659835] [c000000f6dc3f980] [c0000000004562a8] .pci_dev_specific_reset+0xa8/0xf0 [ 442.659913] [c000000f6dc3fa00] [c0000000004448c4] .__pci_dev_reset+0x44/0x430 [ 442.659980] [c000000f6dc3fab0] [c000000000444d5c] .pci_reset_function+0x7c/0xc0 [ 442.660059] [c000000f6dc3fb30] [d00000001c141ab8] .vfio_pci_open+0xe8/0x2b0 [vfio_pci] [ 442.660139] [c000000f6dc3fbd0] [c000000000586c30] .vfio_group_fops_unl_ioctl+0x3a0/0x630 [ 442.660219] [c000000f6dc3fc90] [c000000000255fbc] .do_vfs_ioctl+0x4ec/0x7c0 [ 442.660286] [c000000f6dc3fd80] [c000000000256364] .SyS_ioctl+0xd4/0xf0 [ 442.660354] [c000000f6dc3fe30] [c000000000009e54] syscall_exit+0x0/0x98 [ 442.660420] Instruction dump: [ 442.660454] 4bfffce9 4bfffee4 7c0802a6 fbc1fff0 fbe1fff8 f8010010 f821ff81 7c7e1b78 [ 442.660566] 7c9f2378 60000000 60000000 e93e02c8 <e8690060> 2fa30000 41de00c4 2b9f0002 [ 442.660679] ---[ end trace a64ac9546bcf0328 ]--- [ 442.660724] The reason is current VF is not EEH enabled. This patch introduces a macro to convert eeh_dev to eeh_pe. By doing so, it will prevent converting with NULL pointer. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> CC: Michael Ellerman <mpe@ellerman.id.au> V3 -> V4: 1. move the macro definition from include/linux/pci.h to arch/powerpc/include/asm/eeh.h V2 -> V3: 1. rebased on 3.17-rc4 2. introduce a macro 3. use this macro in several other places V1 -> V2: 1. code style and patch subject adjustment Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-08-07powerpc/eeh: Export eeh_iommu_group_to_pe()Gavin Shan
The function is used by VFIO driver, which might be built as a dynamic module. So it should be exported. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_APIBenjamin Herrenschmidt
Some new functions are exposed for use by the IOMMU code but won't build when CONFIG_IOMMU_API isn't set, so shield them appropriately. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Replace pr_warning() with pr_warn()Gavin Shan
pr_warn() is equal to pr_warning(), but the former is a bit more formal according to commit fc62f2f ("kernel.h: add pr_warn for symmetry to dev_warn, netdev_warn"). The patch replaces pr_warning() with pr_warn(). Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Reduce lines of log dumpGavin Shan
The patch prints 4 PCIE or AER config registers each line, which is part of the EEH log so that it looks a bit more compact. Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Selectively enable IO for error logGavin Shan
According to the experiment I did, PCI config access is blocked on P7IOC frozen PE by hardware, but PHB3 doesn't do that. That means we always get 0xFF's while dumping PCI config space of the frozen PE on P7IOC. We don't have the problem on PHB3. So we have to enable I/O prioir to collecting error log. Otherwise, meaningless 0xFF's are always returned. The patch fixes it by EEH flag (EEH_ENABLE_IO_FOR_LOG), which is selectively set to indicate the case for: P7IOC on PowerNV platform, pSeries platform. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Refactor EEH flag accessorsGavin Shan
There are multiple global EEH flags. Almost each flag has its own accessor, which doesn't make sense. The patch refactors EEH flag accessors so that they look unified: eeh_add_flag(): Add EEH flag eeh_clear_flag(): Clear EEH flag eeh_has_flag(): Check if one specific flag has been set eeh_enabled(): Check if EEH functionality has been enabled Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Fetch IOMMU table in reliable wayGavin Shan
Function eeh_iommu_group_to_pe() iterates each PCI device to check the binding IOMMU group with get_iommu_table_base(), which possibly fetches pdev->dev.archdata.dma_data.dma_offset. It's (0x1 << 59) for "bypass" cases. The patch fixes the issue by iterating devices hooked to the IOMMU group and fetch IOMMU table there. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: EEH support for VFIO PCI deviceGavin Shan
The patch exports functions to be used by new VFIO ioctl command, which will be introduced in subsequent patch, to support EEH functinality for VFIO PCI devices. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/eeh: Avoid event on passed PEGavin Shan
We must not handle EEH error on devices which are passed to somebody else. Instead, we expect that the frozen device owner detects an EEH error and recovers from it. This avoids EEH error handling on passed through devices so the device owner gets a chance to handle them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/eeh: Dump PE location codeGavin Shan
As Ben suggested, it's meaningful to dump PE's location code for site engineers when hitting EEH errors. The patch introduces function eeh_pe_loc_get() to retireve the location code from dev-tree so that we can output it when hitting EEH errors. If primary PE bus is root bus, the PHB's dev-node would be tried prior to root port's dev-node. Otherwise, the upstream bridge's dev-node of the primary PE bus will be check for the location code directly. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11powerpc/eeh: Report frozen parent PE prior to child PEGavin Shan
When we have the corner case of frozen parent and child PE at the same time, we have to handle the frozen parent PE prior to the child. Without clearning the frozen state on parent PE, the child PE can't be recovered successfully. The patch searches the EEH PE hierarchy tree and returns the toppest frozen PE to be handled. It ensures the frozen parent PE will be handled prior to child PE. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-20powerpc/eeh: Fix build error for cellebGavin Shan
Commit 7f52a526f ("powerpc/eeh: Allow to disable EEH") caused following build error with "celleb_defconfig" as being catched by Mikey on linux-next. arch/powerpc/kernel/eeh.c: In function 'eeh_init_proc': arch/powerpc/kernel/eeh.c:1173:37: error: 'powerpc_debugfs_root' \ undeclared (first use in this function) arch/powerpc/kernel/eeh.c:1173:37: note: each undeclared identifier \ is reported only once for each function it appears in Reported-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28powerpc/eeh: Make the delay for PE reset unifiedGavin Shan
Basically, we have 3 types of resets to fulfil PE reset: fundamental, hot and PHB reset. For the later 2 cases, we need PCI bus reset hold and settlement delay as specified by PCI spec. PowerNV and pSeries platforms are running on top of different firmware and some of the delays have been covered by underly firmware (PowerNV). The patch makes the delays unified to be done in backend, instead of EEH core. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28powerpc/eeh: Allow to disable EEHGavin Shan
The patch introduces bootarg "eeh=off" to disable EEH functinality. Also, it creates /sys/kerenl/debug/powerpc/eeh_enable to disable or enable EEH functionality. By default, we have the functionality enabled. For PowerNV platform, we will restore to have the conventional mechanism of clearing frozen PE during PCI config access if we're going to disable EEH functionality. Conversely, we will rely on EEH for error recovery. The patch also fixes the issue that we missed to cover the case of disabled EEH functionality in function ioda_eeh_event(). Those events driven by interrupt should be cleared to avoid endless reporting. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28powerpc/eeh: Cleanup EEH subsystem variablesGavin Shan
There're 2 EEH subsystem variables: eeh_subsystem_enabled and eeh_probe_mode. We needn't maintain 2 variables and we can just have one variable and introduce different flags. The patch also introduces additional flag EEH_FORCE_DISABLE, which will be used to disable EEH subsystem via boot parameter ("eeh=off") in future. Besides, the patch also introduces flag EEH_ENABLED, which is changed to disable or enable EEH functionality on the fly through debugfs entry in future. With the patch applied, the creteria to check the enabled EEH functionality is changed to: !EEH_FORCE_DISABLED && EEH_ENABLED : Enabled Other cases : Disabled Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28powerpc/eeh: Use cached capability for log dumpGavin Shan
When calling into eeh_gather_pci_data() on pSeries platform, we possiblly don't have pci_dev instance yet, but eeh_dev is always ready. So we use cached capability from eeh_dev instead of pci_dev for log dump there. In order to keep things unified, we also cache PCI capability positions to eeh_dev for PowerNV as well. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28powerpc/eeh: Cleanup eeh_gather_pci_data()Gavin Shan
The patch replaces printk(KERN_WARNING ...) with pr_warn() in the function eeh_gather_pci_data(). Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28powerpc/eeh: Avoid I/O access during PE resetGavin Shan
We have suffered recrusive frozen PE a lot, which was caused by IO accesses during the PE reset. Ben came up with the good idea to keep frozen PE until recovery (BAR restore) gets done. With that, IO accesses during PE reset are dropped by hardware and wouldn't incur the recrusive frozen PE any more. The patch implements the idea. We don't clear the frozen state until PE reset is done completely. During the period, the EEH core expects unfrozen state from backend to keep going. So we have to reuse EEH_PE_RESET flag, which has been set during PE reset, to return normal state from backend. The side effect is we have to clear frozen state for towice (PE reset and clear it explicitly), but that's harmless. We have some limitations on pHyp. pHyp doesn't allow to enable IO or DMA for unfrozen PE. So we don't enable them on unfrozen PE in eeh_pci_enable(). We have to enable IO before grabbing logs on pHyp. Otherwise, 0xFF's is always returned from PCI config space. Also, we had wrong return value from eeh_pci_enable() for EEH_OPT_THAW_DMA case. The patch fixes it too. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28powerpc/eeh: EEH_PE_ISOLATED not reflect HW stateGavin Shan
When doing PE reset, EEH_PE_ISOLATED is cleared unconditionally. However, We should remove that if the PE reset has cleared the frozen state successfully. Otherwise, the flag should be kept. The patch fixes the issue. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28powerpc/eeh: Remove EEH_PE_PHB_DEADGavin Shan
The PE state (for eeh_pe instance) EEH_PE_PHB_DEAD is duplicate to EEH_PE_ISOLATED. Originally, those PHBs (PHB PE) with EEH_PE_PHB_DEAD would be removed from the system. However, it's safe to replace that with EEH_PE_ISOLATED. The patch also clear EEH_PE_RECOVERING after fenced PHB has been handled, either failure or success. It makes the PHB PE state consistent with: PHB functions normally NONE PHB has been removed EEH_PE_ISOLATED PHB fenced, recovery in progress EEH_PE_ISOLATED | RECOVERING Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-17powerpc/eeh: Disable EEH on rebootGavin Shan
We possiblly detect EEH errors during reboot, particularly in kexec path, but it's impossible for device drivers and EEH core to handle or recover them properly. The patch registers one reboot notifier for EEH and disable EEH subsystem during reboot. That means the EEH errors is going to be cleared by hardware reset or second kernel during early stage of PCI probe. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-17powerpc/eeh: Cleanup on eeh_subsystem_enabledGavin Shan
The patch cleans up variable eeh_subsystem_enabled so that we needn't refer the variable directly from external. Instead, we will use function eeh_enabled() and eeh_set_enable() to operate the variable. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-15powerpc/eeh: Hotplug improvementGavin Shan
When EEH error comes to one specific PCI device before its driver is loaded, we will apply hotplug to recover the error. During the plug time, the PCI device will be probed and its driver is loaded. Then we wrongly calls to the error handlers if the driver supports EEH explicitly. The patch intends to fix by introducing flag EEH_DEV_NO_HANDLER and set it before we remove the PCI device. In turn, we can avoid wrongly calls the error handlers of the PCI device after its driver loaded. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-05powerpc: Increase EEH recovery timeout for SR-IOVBrian King
In order to support concurrent adapter firmware download to SR-IOV adapters on pSeries, each VF will see an EEH event where the slot will remain in the unavailable state for the duration of the adapter firmware update, which can take as long as 5 minutes. Extend the EEH recovery timeout to account for this. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21powerpc/eeh: Enable PCI_COMMAND_MASTER for PCI bridgesGavin Shan
On PHB3, we will fail to fetch IODA tables without PCI_COMMAND_MASTER on PCI bridges. According to one experiment I had, the MSIx interrupts didn't raise from the adapter without the bit applied to all upstream PCI bridges including root port of the adapter. The patch forces to have that bit enabled accordingly. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-14Merge tag 'pci-v3.13-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Resource management - Fix host bridge window coalescing (Alexey Neyman) - Pass type, width, and prefetchability for window alignment (Wei Yang) PCI device hotplug - Convert acpiphp, acpiphp_ibm to dynamic debug (Lan Tianyu) Power management - Remove pci_pm_complete() (Liu Chuansheng) MSI - Fail initialization if device is not in PCI_D0 (Yijing Wang) MPS (Max Payload Size) - Use pcie_get_mps() and pcie_set_mps() to simplify code (Yijing Wang) - Use pcie_set_readrq() to simplify code (Yijing Wang) - Use cached pci_dev->pcie_mpss to simplify code (Yijing Wang) SR-IOV - Enable upstream bridges even for VFs on virtual buses (Bjorn Helgaas) - Use pci_is_root_bus() to avoid catching virtual buses (Wei Yang) Virtualization - Add x86 MSI masking ops (Konrad Rzeszutek Wilk) Freescale i.MX6 - Support i.MX6 PCIe controller (Sean Cross) - Increase link startup timeout (Marek Vasut) - Probe PCIe in fs_initcall() (Marek Vasut) - Fix imprecise abort handler (Tim Harvey) - Remove redundant of_match_ptr (Sachin Kamat) Renesas R-Car - Support Gen2 internal PCIe controller (Valentine Barshak) Samsung Exynos - Add MSI support (Jingoo Han) - Turn off power when link fails (Jingoo Han) - Add Jingoo Han as maintainer (Jingoo Han) - Add clk_disable_unprepare() on error path (Wei Yongjun) - Remove redundant of_match_ptr (Sachin Kamat) Synopsys DesignWare - Add irq_create_mapping() (Pratyush Anand) - Add header guards (Seungwon Jeon) Miscellaneous - Enable native PCIe services by default on non-ACPI (Andrew Murray) - Cleanup _OSC usage and messages (Bjorn Helgaas) - Remove pcibios_last_bus boot option on non-x86 (Bjorn Helgaas) - Convert bus code to use bus_, drv_, and dev_groups (Greg Kroah-Hartman) - Remove unused pci_mem_start (Myron Stowe) - Make sysfs functions static (Sachin Kamat) - Warn on invalid return from driver probe (Stephen M. Cameron) - Remove Intel Haswell D3 delays (Todd E Brandt) - Call pci_set_master() in core if driver doesn't do it (Yinghai Lu) - Use pci_is_pcie() to simplify code (Yijing Wang) - Use PCIe capability accessors to simplify code (Yijing Wang) - Use cached pci_dev->pcie_cap to simplify code (Yijing Wang) - Removed unused "is_pcie" from struct pci_dev (Yijing Wang) - Simplify sysfs CPU affinity implementation (Yijing Wang)" * tag 'pci-v3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (79 commits) PCI: Enable upstream bridges even for VFs on virtual buses PCI: Add pci_upstream_bridge() PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq() PCI: Warn on driver probe return value greater than zero PCI: Drop warning about drivers that don't use pci_set_master() PCI: Workaround missing pci_set_master in pci drivers powerpc/pci: Use pci_is_pcie() to simplify code [fix] PCI: Update pcie_ports 'auto' behavior for non-ACPI platforms PCI: imx6: Probe the PCIe in fs_initcall() PCI: Add R-Car Gen2 internal PCI support PCI: imx6: Remove redundant of_match_ptr PCI: Report pci_pme_active() kmalloc failure mn10300/PCI: Remove useless pcibios_last_bus frv/PCI: Remove pcibios_last_bus PCI: imx6: Increase link startup timeout PCI: exynos: Remove redundant of_match_ptr PCI: imx6: Fix imprecise abort handler PCI: Fail MSI/MSI-X initialization if device is not in PCI_D0 PCI: imx6: Remove redundant dev_err() in imx6_pcie_probe() x86/PCI: Coalesce multiple overlapping host bridge windows ...
2013-11-04powerpc/pci: Use pci_is_pcie() to simplify code [fix]Yijing Wang
Fix f0308261b1 ("powerpc/pci: Use pci_is_pcie() to simplify code"). I accidentally merged v2 instead of v3, so this adds the difference. Without this, "cap" is the left-over PCI-X capability offset, and we're using it as the PCIe capability offset. [bhelgaas: extracted v2->v3 diff] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-10-11powerpc/eeh: Reorder output messagesGavin Shan
We already had some output messages from EEH core. Occasionally, we can see the output messages from EEH core before the stack dump. That's not what we expected. The patch fixes that and shows the stack dump prior to output messages from EEH core. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-23powerpc/pci: Use pci_is_pcie() to simplify codeYijing Wang
Use pci_is_pcie() to simplify code. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Reviewed-by: Gavin Shan <shangw@linux.vnet.ibm.com> Cc: Gavin Shan <shangw@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org>
2013-08-09powerpc/eeh: Add missing procfs entry for PowerNVMike Qiu
The procfs entry for global statistics has been missed on PowerNV platform and the patch is going to add that. Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/eeh: Introdce flag to protect sysfsGavin Shan
The patch introduces flag EEH_DEV_SYSFS to keep track that the sysfs entries for the corresponding EEH device (then PCI device) has been added or removed, in order to avoid race condition. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/eeh: Use partial hotplug for EEH unaware driversGavin Shan
When EEH error happens to one specific PE, some devices with drivers supporting EEH won't except hotplug on the device. However, there might have other deivces without driver, or with driver without EEH support. For the case, we need do partial hotplug in order to make sure that the PE becomes absolutely quite during reset. Otherise, the PE reset might fail and leads to failure of error recovery. The current code doesn't handle that 'mixed' case properly, it either uses the error callbacks to the drivers, or tries hotplug, but doesn't handle a PE (EEH domain) composed of a combination of the two. The patch intends to support so-called "partial" hotplug for EEH: Before we do reset, we stop and remove those PCI devices without EEH sensitive driver. The corresponding EEH devices are not detached from its PE, but with special flag. After the reset is done, those EEH devices with the special flag will be scanned one by one. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/eeh: Use safe list traversal when walking EEH devicesGavin Shan
Currently, we're trasversing the EEH devices list using list_for_each_entry(). That's not safe enough because the EEH devices might be removed from its parent PE while doing iteration. The patch replaces that with list_for_each_entry_safe(). Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/eeh: Keep PE during hotplugGavin Shan
When we do normal hotplug, the PE (shadow EEH structure) shouldn't be kept around. However, we need to keep it if the hotplug an artifial one caused by EEH errors recovery. Since we remove EEH device through the PCI hook pcibios_release_device(), the flag "purge_pe" passed to various functions is meaningless. So the patch removes the meaningless flag and introduce new flag "EEH_PE_KEEP" to save the PE while doing hotplug during EEH error recovery. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/eeh: Export functions for hotplugGavin Shan
Make some functions public in order to support hotplug on either specific PCI bus or PCI device in future. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24powerpc/eeh: Remove reference to PCI deviceGavin Shan
We will rely on pcibios_release_device() to remove the EEH cache and unbind EEH device for the specific PCI device. So we shouldn't hold the reference to the PCI device from EEH cache and EEH device. Otherwise, pcibios_release_device() won't be called as we expected. The patch removes the reference to the PCI device in EEH core. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-26 12:09:50 +0000