summaryrefslogtreecommitdiff
path: root/arch/powerpc/sysdev/fsl_pci.c
AgeCommit message (Collapse)Author
2013-08-07powerpc/pci: fix PCI-e check link issueYuanquan Chen
For Freescale powerpc platform, the PCI-e bus number uses the reassign mode by default. It means the second PCI-e controller's hose->first_busno is the first controller's last bus number adding 1. For some hotpluged device(or controlled by FPGA), the device is linked to PCI-e slot at linux runtime. It needs rescan for the system to add it and driver it to work. It successes to rescan the device linked to the first PCI-e controller's slot, but fails to rescan the device linked to the second PCI-e controller's slot. The cause is that the bus->number is reset to 0, which isn't equal to the hose->first_busno for the second controller checking PCI-e link. So it doesn't really check the PCI-e link status, the link status is always no_link. The device won't be really rescaned. Reset the bus->number to hose->first_busno in the function fsl_pcie_check_link(), it will do the real checking PCI-e link status for the second controller, the device will be rescaned. Signed-off-by: Yuanquan Chen <Yuanquan.Chen@freescale.com> Tested-by: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-07powerpc/fsl-pci: enable SWIOTLB in function setup_pci_atmuKevin Hao
This function contains all the stuff we need to check if SWIOTLB should be enabled or not. So it is more convenient to enable the SWIOTLB here than later. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-07powerpc/fsl-pci: fix the unreachable warning messageKevin Hao
The (1ull << mem_log) is never greater than mem unless mem_log++; Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-07-30powerpc/85xx: Add machine check handler to fix PCIe erratum on mpc85xxHongtao Jia
A PCIe erratum of mpc85xx may causes a core hang when a link of PCIe goes down. when the link goes down, Non-posted transactions issued via the ATMU requiring completion result in an instruction stall. At the same time a machine-check exception is generated to the core to allow further processing by the handler. We implements the handler which skips the instruction caused the stall. This patch depends on patch: powerpc/85xx: Add platform_device declaration to fsl_pci.h Signed-off-by: Zhao Chenhui <b35336@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Liu Shuo <soniccat.liu@gmail.com> Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-06-24powerpc/pci: Fix boot panic on mpc83xx (regression)Rojhalat Ibrahim
The following commit caused a fatal oops when booting on mpc83xx with a non-express PCI bus (regardless of whether a PCI device is present): commit 50d8f87d2b39313dae9d0a2d9b23d377328f2f7b Author: Rojhalat Ibrahim <imr@rtschenk.de> Date: Mon Apr 8 10:15:28 2013 +0200 powerpc/fsl-pci Make PCIe hotplug work with Freescale PCIe controllers Up to now the PCIe link status on Freescale PCIe controllers was only checked once at boot time. So hotplug did not work. With this patch the link status is checked on every config read. PCIe devices not present at boot time are found after doing 'echo 1 >/sys/bus/pci/rescan'. Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> This patch fixes the issue by calling setup_indirect_pci for all device types. fsl_indirect_read_config is now only used for booke/86xx PCIe controllers. Reported-by: Michael Guntsche <mike@it-loops.com> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-05-06powerpc/pci: Support per-aperture memory offsetBenjamin Herrenschmidt
The PCI core supports an offset per aperture nowadays but our arch code still has a single offset per host bridge representing the difference betwen CPU memory addresses and PCI MMIO addresses. This is a problem as new machines and hypervisor versions are coming out where the 64-bit windows will have a different offset (basically mapped 1:1) from the 32-bit windows. This fixes it by using separate offsets. In the long run, we probably want to get rid of that intermediary struct pci_controller and have those directly stored into the pci_host_bridge as they are parsed but this will be a more invasive change. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30powerpc: Fix usage of setup_pci_atmu()Michael Neuling
Linux next is currently failing to compile mpc85xx_defconfig with: arch/powerpc/sysdev/fsl_pci.c:944:2: error: too many arguments to function 'setup_pci_atmu' This is caused by (from Kumar's next branch): commit 34642bbb3d12121333efcf4ea7dfe66685e403a1 Author: Kumar Gala <galak@kernel.crashing.org> powerpc/fsl-pci: Keep PCI SoC controller registers in pci_controller Which changed definition of setup_pci_atmu() but didn't update one of the callers. Below fixes this. Signed-off-by: Michael Neuling <mikey@neuling.org> Reviewed-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-29powerpc/fsl-pci: don't unmap the PCI SoC controller registers in setup_pci_atmuKevin Hao
In patch 34642bbb (powerpc/fsl-pci: Keep PCI SoC controller registers in pci_controller) we choose to keep the map of the PCI SoC controller registers. But we missed to delete the unmap in setup_pci_atmu function. This will cause the following call trace once we access the PCI SoC controller registers later. Unable to handle kernel paging request for data at address 0x8000080080040f14 Faulting instruction address: 0xc00000000002ea58 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=24 T4240 QDS Modules linked in: NIP: c00000000002ea58 LR: c00000000002eaf4 CTR: c00000000002eac0 REGS: c00000017e10b4a0 TRAP: 0300 Not tainted (3.9.0-rc1-00052-gfa3529f-dirty) MSR: 0000000080029000 <CE,EE,ME> CR: 28adbe22 XER: 00000000 SOFTE: 0 DEAR: 8000080080040f14, ESR: 0000000000000000 TASK = c00000017e100000[1] 'swapper/0' THREAD: c00000017e108000 CPU: 2 GPR00: 0000000000000000 c00000017e10b720 c0000000009928d8 c00000017e578e00 GPR04: 0000000000000000 000000000000000c 0000000000000001 c00000017e10bb40 GPR08: 0000000000000000 8000080080040000 0000000000000000 0000000000000016 GPR12: 0000000088adbe22 c00000000fffa800 c000000000001ba0 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c0000000008a5b70 GPR24: c0000000008af938 c0000000009a28d8 c0000000009bb5dc c00000017e10bb40 GPR28: c00000017e32a400 c00000017e10bc00 c00000017e32a400 c00000017e578e00 NIP [c00000000002ea58] .fsl_pcie_check_link+0x88/0xf0 LR [c00000000002eaf4] .fsl_indirect_read_config+0x34/0xb0 Call Trace: [c00000017e10b720] [c00000017e10b7a0] 0xc00000017e10b7a0 (unreliable) [c00000017e10ba30] [c00000000002eaf4] .fsl_indirect_read_config+0x34/0xb0 [c00000017e10bad0] [c00000000033aa08] .pci_bus_read_config_byte+0x88/0xd0 [c00000017e10bb90] [c00000000088d708] .pci_apply_final_quirks+0x9c/0x18c [c00000017e10bc40] [c0000000000013dc] .do_one_initcall+0x5c/0x1f0 [c00000017e10bcf0] [c00000000086ebac] .kernel_init_freeable+0x180/0x26c [c00000017e10bdb0] [c000000000001bbc] .kernel_init+0x1c/0x460 [c00000017e10be30] [c000000000000880] .ret_from_kernel_thread+0x64/0xe4 Instruction dump: 38210310 2b800015 4fdde842 7c600026 5463fffe e8010010 7c0803a6 4e800020 60000000 60000000 e92301d0 7c0004ac <80690f14> 0c030000 4c00012c 38210310 ---[ end trace 7a8fe0cbccb7d992 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10powerpc/fsl-pci Make PCIe hotplug work with Freescale PCIe controllersRojhalat Ibrahim
Up to now the PCIe link status on Freescale PCIe controllers was only checked once at boot time. So hotplug did not work. With this patch the link status is checked on every config read. PCIe devices not present at boot time are found after doing 'echo 1 >/sys/bus/pci/rescan'. Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10powerpc/fsl-pci: Keep PCI SoC controller registers in pci_controllerKumar Gala
Move to keeping the SoC registers that control and config the PCI controllers on FSL SoCs in the pci_controller struct. This allows us to not need to ioremap() the registers in multiple different places that use them. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-03powerpc/fsl_pci: fix 64 bit pci size issueRoy Zang
The size might be 64 bit, so use ilog2() instead of __ilog2() or __ilog2_u64(). ilog2() can select 32bit or 64bit function automatically. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-05powerpc/85xx: Add support for FSL PCIe controller v3.0Roy ZANG
The T4240 utilizes a new PCIe controller block that has some minor programming model differences from previous versions. The major one that impacts initialization is how we determine the link state. On the 3.x controllers we have a memory mapped SoC register instead of a PCI config register that reports the link state. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-15powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr structVarun Sethi
The pci controller structure has a provision to store the device structure pointer of the corresponding platform device. Currently this information is not stored during fsl pci controller initialization. This information is required while dealing with iommu groups for pci devices connected to the fsl pci controller. For the case where the pci devices can't be paritioned, they would fall under the same device group as the pci controller. This patch stores the platform device information in the pci controller structure during initialization. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-13powerpc/85xx: fix various PCI node compatible stringsTimur Tabi
Fix and/or improve the compatible strings of the PCI device tree nodes for some Freescale SOCs. This fixes some issues and improves consistency among the SOCs. Specifically: 1) The P1022 has a v1 PCIe controller, so the compatible property should just say "fsl,mpc8548-pcie". U-Boot does not look for "fsl,p1022-pcie", so it wasn't fixing up the node. 2) The P4080 has a v2.1 PCIe controller, so add that version-specific string to the device tree. Update the kernel to also look for that string. Currently, the kernel looks for "fsl,p4080-pcie" specifically, but eventually that check should be deleted. 3) The P1010 device tree claims compatibility with v2.2 and v2.3, but that's redundant. No other device tree does this. Remove the v2.2 string. 4) The kernel looks for both "fsl,p1023-pcie" and "fsl,qoriq-pcie-v2.2", even though the P1023 device trees has always included both strings. Remove the search for "fsl,p1023-pcie". Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-01-03POWERPC: drivers: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-18Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc update from Benjamin Herrenschmidt: "The main highlight is probably some base POWER8 support. There's more to come such as transactional memory support but that will wait for the next one. Overall it's pretty quiet, or rather I've been pretty poor at picking things up from patchwork and reviewing them this time around and Kumar no better on the FSL side it seems..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits) powerpc+of: Rename and fix OF reconfig notifier error inject module powerpc: mpc5200: Add a3m071 board support powerpc/512x: don't compile any platform DIU code if the DIU is not enabled powerpc/mpc52xx: use module_platform_driver macro powerpc+of: Export of_reconfig_notifier_[register,unregister] powerpc/dma/raidengine: add raidengine device powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct powerpc/mpc85xx: Change spin table to cached memory powerpc/fsl-pci: Add PCI controller ATMU PM support powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS] powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers powerpc: Disable relocation on exceptions when kexecing powerpc: Enable relocation on during exceptions at boot powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function powerpc: Add wrappers to enable/disable relocation on exceptions powerpc: Add set_mode hcall powerpc: Setup relocation on exceptions for bare metal systems powerpc: Move initial mfspr LPCR out of __init_LPCR powerpc: Add relocation on exception vector handlers ...
2012-11-25powerpc/fsl-pci: Add PCI controller ATMU PM supportJia Hongtao
Power supply for PCI controller ATMU registers is off when system go to deep-sleep state. So ATMU registers should be re-setup during PCI controllers resume from sleep. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-11-17drivers/of: Constify device_node->name and ->path_component_nameGrant Likely
Neither of these should ever be changed once set. Make them const and fix up the users that try to modify it in-place. In one case kmalloc+memcpy is replaced with kstrdup() to avoid modifying the string. Build tested with defconfigs on ARM, PowerPC, Sparc, MIPS, x86 among others. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Julian Calaby <julian.calaby@gmail.com>
2012-09-27powerpc/fsl-pci: use 'Header Type' to identify PCIE modeMinghuan Lian
The original code uses 'Programming Interface' field to judge if PCIE is EP or RC mode, however, some latest silicons do not support this functionality. According to PCIE specification, 'Header Type' offset 0x0e is used to indicate header type, so change code to use 'Header Type' field to judge PCIE mode. Because FSL PCI controller does not support 'Header Type', patch still uses 'Programming Interface' to identify PCI mode. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-19powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabledJia Hongtao
Fix the following warning: arch/powerpc/sysdev/fsl_pci.c: In function 'fsl_pci_probe': arch/powerpc/sysdev/fsl_pci.c:867:25: error: unused variable 'hose' Signed-off-by: Jia Hongtao <B38951@freescale.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/fsl-pci: Unify pci/pcie initialization codeJia Hongtao
We unified the Freescale pci/pcie initialization by changing the fsl_pci to a platform driver. In previous PCI code architecture the initialization routine is called at board_setup_arch stage. Now the initialization is done in probe function which is architectural better. Also It's convenient for adding PM support for PCI controller in later patch. Now we registered pci controllers as platform devices. So we combine two initialization code as one platform driver. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/pci: Use PCIe IP block revision register instead of compatibleRoy Zang
Freescale PCIe IP block revision bigger than rev2.2 will also need redefine the sequence of inbound windows. So change to use IP block revision instead of compatible for the judgment. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/swiotlb: Enable at early stage and disable if not necessaryJia Hongtao
Remove the dependency on PCI initialization for SWIOTLB initialization. So that PCI can be initialized at proper time. SWIOTLB is partly determined by PCI inbound/outbound map which is assigned in PCI initialization. But swiotlb_init() should be done at the stage of mem_init() which is much earlier than PCI initialization. So we reserve the memory for SWIOTLB first and free it if not necessary. All boards are converted to fit this change. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12powerpc/fsl-pci: add fsl,qoriq-pcie-v2.4 compatible stringTimur Tabi
The PCI controller on the Freescale P5040 is v2.4. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-03powerpc/fsl-pci: Only scan PCI bus if configured as a hostJia Hongtao
We change fsl_add_bridge to return -ENODEV if the controller is working in agent mode. Then check the return value of fsl_add_bridge to guarantee that only successfully added host bus will be scanned. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-11powerpc/fsl-pci: get PCI init out of board filesScott Wood
As an alternative incremental starting point to Jia Hongtao's patchset, get the FSL PCI init out of the board files, but do not yet convert to a platform driver. Rather than having each board supply a magic register offset for determining the "primary" bus, we look for which PCI host bridge contains an ISA node within its subtree. If there is no ISA node, normally that would mean there is no primary bus, but until certain bugs are fixed we arbitrarily designate a primary in this case. Conversion to a platform driver and related improvements can happen after this, as the ordering issues are sorted out. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10powerpc/fsl/pci: Fix when quirk_fsl_pcie_header is freed upMatias Garcia
Change quirk_fsl_pcie_header from __init to __devinit to ensure if we have a runtime access (like via an FPGA being loaded after boot on the PCIe link) that we dont access randomly freed memory. Signed-off-by: Matias Garcia <mgarcia@rossvideo.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-02-16powerpc/fsl/pci: Fix PCIe fixup regressionBenjamin Herrenschmidt
Upstream changes to the way PHB resources are registered broke the resource fixup for FSL boards. We can no longer rely on the resource pointer array for the PHB's pci_bus structure, so let's leave it alone and go straight for the PHB resources instead. This also makes the code generally more readable. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-01-17arch/powerpc/sysdev/fsl_pci.c: add missing iounmapJulia Lawall
Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-01-04powerpc/fsl: add MSI support for the Freescale hypervisorTimur Tabi
Add support for vmpic-msi nodes to the fsl_msi driver. The MSI is virtualized by the hypervisor, so the vmpic-msi does not contain a 'reg' property. Instead, the driver uses hcalls. Add support for the "msi-address-64" property to the fsl_pci driver. The Freescale hypervisor typically puts the virtualized MSIIR register in the page after the end of DDR, so we extend the DDR ATMU to cover it. Any other location for MSIIR is not supported, for now. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-01-04powerpc/fsl-pci: Allow 64-bit PCIe devices to DMA to any memory addressKumar Gala
There is an issue on FSL-BookE 64-bit devices (P5020) in which PCIe devices that are capable of doing 64-bit DMAs (like an Intel e1000) do not function and crash the kernel if we have >4G of memory in the system. The reason is that the existing code only sets up one inbound window for access to system memory across PCIe. That window is limited to a 32-bit address space. So on systems we'll end up utilizing SWIOTLB for dma mappings. However SWIOTLB dma ops implement dma_alloc_coherent() as dma_direct_alloc_coherent(). Thus we can end up with dma addresses that are not accessible because of the inbound window limitation. We could possibly set the SWIOTLB alloc_coherent op to swiotlb_alloc_coherent() however that does not address the issue since the swiotlb_alloc_coherent() will behave almost identical to dma_direct_alloc_coherent() since the devices coherent_dma_mask will be greater than any address allocated by swiotlb_alloc_coherent() and thus we'll never bounce buffer it into a range that would be dma-able. The easiest and best solution is to just make it so that a 64-bit capable device is able to DMA to any internal system address. We accomplish this by opening up a second inbound window that maps all of memory above the internal SoC address width so we can set it up to access all of the internal SoC address space if needed. We than fixup the dma_ops and dma_offset for PCIe devices with a dma mask greater than the maximum internal SoC address. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-26Merge branch 'next/cross-platform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/cross-platform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: Consolidate the clkdev header files ARM: set vga memory base at run-time ARM: convert PCI defines to variables ARM: pci: make pcibios_assign_all_busses use pci_has_flag ARM: remove unnecessary mach/hardware.h includes pci: move microblaze and powerpc pci flag functions into asm-generic powerpc: rename ppc_pci_*_flags to pci_*_flags Fix up conflicts in arch/microblaze/include/asm/pci-bridge.h
2011-07-25Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (99 commits) drivers/virt: add missing linux/interrupt.h to fsl_hypervisor.c powerpc/85xx: fix mpic configuration in CAMP mode powerpc: Copy back TIF flags on return from softirq stack powerpc/64: Make server perfmon only built on ppc64 server devices powerpc/pseries: Fix hvc_vio.c build due to recent changes powerpc: Exporting boot_cpuid_phys powerpc: Add CFAR to oops output hvc_console: Add kdb support powerpc/pseries: Fix hvterm_raw_get_chars to accept < 16 chars, fixing xmon powerpc/irq: Quieten irq mapping printks powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigs powerpc: Add mpt2sas driver to pseries and ppc64 defconfig powerpc: Disable IRQs off tracer in ppc64 defconfig powerpc: Sync pseries and ppc64 defconfigs powerpc/pseries/hvconsole: Fix dropped console output hvc_console: Improve tty/console put_chars handling powerpc/kdump: Fix timeout in crash_kexec_wait_realmode powerpc/mm: Fix output of total_ram. powerpc/cpufreq: Add cpufreq driver for Momentum Maple boards powerpc: Correct annotations of pmu registration functions ... Fix up trivial Kconfig/Makefile conflicts in arch/powerpc, drivers, and drivers/cpufreq
2011-07-12powerpc: rename ppc_pci_*_flags to pci_*_flagsRob Herring
This renames pci flags functions and enums in preparation for creating generic version in asm-generic/pci-bridge.h. The following search and replace is done: s/ppc_pci_/pci_/ s/PPC_PCI_/PCI_/ Direct accesses to ppc_pci_flag variable are replaced with helper functions. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org>
2011-06-27powerpc/85xx: Add host-pci(e) bridge only for RCPrabhakar Kushwaha
FSL PCIe controller can act as agent(EP) or host(RC). Under Agent(EP) mode the controller will be configured by the host system. So its not required to be registered with the PCI(e) sub-system. We only register the controller if its configured in host(RC) mode. Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-22powerpc/fsl_pci: Simplify matching logic for PCI_FIXUP_HEADERKumar Gala
We fixup every FSL PCIe Root Complex we need to fixup a few things. Rather than adding every device under the sun we move to just matching only on the vendor (PCI_VENDOR_ID_FREESCALE) and than check that we are a PCIe controller in host mode in the fixup. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-10treewide: Convert uses of struct resource to resource_size(ptr)Joe Perches
Several fixes as well where the +1 was missing. Done via coccinelle scripts like: @@ struct resource *ptr; @@ - ptr->end - ptr->start + 1 + resource_size(ptr) and some grep and typing. Mostly uncompiled, no cross-compilers. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-12powerpc/85xx: Don't add disabled PCIe devicesPrabhakar Kushwaha
PCIe nodes with the property status="disabled" are not usable and so avoid adding "disabled" PCIe bridge with the system. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-03-15powerpc/fsl_pci: Add support for FSL PCIe controllers v2.xPrabhakar Kushwaha
FSL PCIe controller v2.1: - New MSI inbound window - Same Inbound windows address as PCIe controller v1.x Added new pit_t member(pmit) to struct ccsr_pci for MSI inbound window FSL PCIe controller v2.2 and v2.3: - Different addresses for PCIe inbound window 3,2,1 - Exposed PCIe inbound window 0 - New PCIe interrupt status register Added new config and interrupt Status register to struct ccsr_pci & updated pit_t array size to reflect the 4 inbound windows. Device tree is used to maintain backward compatibility i.e. update inbound window 1 index depending upon "compatible" field witin PCIE node. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-14powerpc/fsl-booke: Add PCI device ids for P2040/P3041/P5010/P5020 QoirQ chipsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-14powerpc/fsl-pci: Fix MSI support on 83xx platformsKumar Gala
The following commit broke 83xx because it assumed the 83xx platforms exposed the "IMMR" address in BAR0 like the 85xx/86xx/QoriQ devices do: commit 3da34aae03d498ee62f75aa7467de93cce3030fd Author: Kumar Gala <galak@kernel.crashing.org> Date: Tue May 12 15:51:56 2009 -0500 powerpc/fsl: Support unique MSI addresses per PCIe Root Complex However that is not true, so we have to search through the inbound window settings on 83xx to find which one matches the IMMR address to determine its PCI address. Reported-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31powerpc/85xx: Add P1021 PCI IDs and quirksAnton Vorontsov
This is needed for proper PCI-E support on P1021 SoCs. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-05Merge commit 'kumar/next' into nextBenjamin Herrenschmidt
2010-08-04powerpc/fsl_pci: add quirk for mpc8308 pcie bridgeIlya Yanok
This patch adds the quirk for PCIE controller found on Freescale MPC8308. The quirk is the same as for other MPC83xx processors. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-14lmb: rename to memblockYinghai Lu
via following scripts FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/lmb/memblock/g' \ -e 's/LMB/MEMBLOCK/g' \ $FILES for N in $(find . -name lmb.[ch]); do M=$(echo $N | sed 's/lmb/memblock/g') mv $N $M done and remove some wrong change like lmbench and dlmb etc. also move memblock.c from lib/ to mm/ Suggested-by: Ingo Molnar <mingo@elte.hu> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-12-09powerpc/fsl_pci: Fix P2P bridge handling for MPC83xx PCIe controllersAnton Vorontsov
It appears that we wrongly calculate dev_base for type1 config cycles. The thing is: we shouldn't subtract hose->first_busno because PCI core sets PCI primary, secondary and subordinate bus numbers, and PCIe controller actually takes the registers into account. So we should use just bus->number. Also, according to MPC8315 reference manual, primary bus number should always remain 0. We have PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS quirk in indirect_pci.c, but since 83xx is somewhat special, it doesn't use indirect_pci.c routines, so we have to implement the quirk specifically for 83xx PCIe controllers. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20powerpc/fsl: Add PCI device ids for new QoirQ chipsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20powerpc/85xx: Kconfig cleanupKumar Gala
Introduce new FSL_SOC_BOOKE Kconfig to handle both 85xx and QorIQ based chips. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-21powerpc/pci: Clean up direct access to sysdata by FSL platformsKumar Gala
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-22 11:28:38 +0000