summaryrefslogtreecommitdiff
path: root/arch/sh/boards/renesas/rts7751r2d/setup.c
AgeCommit message (Collapse)Author
2008-05-23sh: use sm501 8250 mfd support on r2d boardsMagnus Damm
Make use of recently added sm501 8250 uart support, commit 61711f8fd8180e458cfb6846bcf4fc636a95f3db makes the mfd code handle 8250 uarts so there is no longer need to do it from the r2d board code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: rts7751r2d: Kill off unneeded ifdefs.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: trapped io support for r2d V2Magnus Damm
This patch converts the CF device on r2d boards from machvec readb/writeb to trapped io. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-06Rename: linux/pata_platform.h to linux/ata_platform.hJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28sh: add spi header and r2d platform data V3Magnus Damm
This patch adds the header file asm/spi.h and board specific code for the r2d board. The header file contains a structure that should be used to point out a single spi bus. The board specific code for r2d is updated with such a structure for the new spi_sh_sci driver. The structure contains a chip select callback plus information about the R9701 rtc chip which is attached to the spi bus. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: r2d - enable sm501 usb host functionMagnus Damm
This patch tells the sm501 mfd driver to build platform data for the sm501 usb host driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: remove voyagergxMagnus Damm
This patch removes redundant irq handling code together with unused consistent alloc code. R2D uart setup code is changed to use sm501-regs.h and unused header files are removed. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: r2d - add lcd planel timings to sm501 platform dataMagnus Damm
This patch adds timings to drive a Sharp LQ104V1DG21 lcd panel that can be hooked up to R2D-1 or R2D-PLUS. The sm501fb driver should leave the pins FPEN and VBIASEN alone, and this patch instructs the driver to do so by not setting flags flags for these pins. This patch works best together with the patch posted to the linux-fbdev-devel list "sm501fb: control panel pin usage with platform data flags", but this patch can be merged independently. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-23sh: fix R2D-1 CF supportMagnus Damm
This patch fixes CF support for R2D-1 boards. Both R2D-1 and R2D-PLUS are equipped with CF IRQs, but the R2D-1 FPGA version seem to deliver IRQ spikes with certain CF cards during libata probing. This patch enables polling for R2D-1 as a workaround for this broken FGPA logic. R2D-1 CF support was recently introduced by commit: 43f4b8c7578b928892b6f01d374346ae14e5eb70. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: rts7751r2d: Fix up trivial build failure.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: rts7751r2d cf_ide reworkAoi Shinkai
Support CF IDE on R2D-1 boards. Signed-off-by: Aoi Shinkai <shinkoi2005@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Fix up heartbeat build and resource size.Paul Mundt
We were abusing the resource size for the number of bits, this has been reworked using proper platform data, so this can be tidied up now. Boards in general only have a 1-byte wide resource, which the ioremap_nocache() case already handles. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: replace sh specific CONFIG_VOYAGERGX with CONFIG_MFD_SM501Magnus Damm
This patch replaces all instances of CONFIG_VOYAGERGX with CONFIG_MFD_SM501. While at it we make sure the r2d code compiles both with and without SM501. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - convert board specific r2d codeMagnus Damm
This patch converts the board specific interrupt code for r2d to make use of intc. While at it we improve the Kconfig to avoid confusion. - Two sets of interrupt tables exist - one for R2D-1 and one for R2D-PLUS. - R2D-1 and R2D-PLUS use the same irq constants. - R2D-1 has AX88796 support, R2D-PLUS does not hook up that IRQ. - R2D-PLUS has KEY support, R2D-1 does not hook up that IRQ. - The number and order of IRQ values are disconnected from register bits. - Interrupt sources now start from IRQ 100. - The machvec demux function converts from irlm IRQ 0-14 to IRQ 100++. Tested on R2D-1 and R2D-PLUS boards. Version 2 adds CONFIG_RTS7751R2D_1 and CONFIG_RTS7751R2D_PLUS together with intc structured as __initdata. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - convert voyagergx codeMagnus Damm
This patch converts the sh-specific voyagergx interrupt code to make use of intc. A lot of "interesting" old cruft gets replaced with intc tables and some simple demux code. - All interrupt sources in the sm501 data sheet are now in the header. - The number and order of IRQ values are disconnected from register bits. - Interrupt sources now start from IRQ 200. - set_irq_chained_handler() is now used to hook up the demux function. In the future it would probably make sense to move the interrupt demuxer into into the mfd driver, but this is probably a nice step in the right direction until that happens. Tested on a R2D-1 board using the serial port hooked up to the sm501. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-03sh: fix cf support on r2d boardsMagnus Damm
This patch makes sure cf support is enabled on R2D-PLUS but disabled on R2D-1. Without this fix R2D-1 boards hang on bootup. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: zero terminate 8250 platform data for r2d boardMagnus Damm
struct plat_serial8250_port should contain a terminating zero entry Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Kill off machvec aliases.Paul Mundt
We now throw all of the machvecs in to .machvec.init and either select one on the command line, or copy out the first (and usually only) one to sh_mv. The rest are freed as usual. This gets rid of all of the silly sh_mv aliasing and makes the selection explicit rather than link-order dependent. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05sh: Enable SM501 support for RTS7751R2D.Paul Mundt
This enables the SM501 drivers for the R2D board. Additional work needs to be done to migrate off of the VoyagerGX cchip code to make use of the rest of the mfd infrastructure. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-15sh: rts7751r2d board updates.Paul Mundt
This tidies up some of the rts7751r2d mess and gets it booting again. Update the defconfig, too. Signed-off-by: Masayuki Hosokawa <hosokawa@ace-jp.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: heartbeat consolidation for banked LEDs.Paul Mundt
This consolidates the various board heartbeat LED implementations, used for strobing the load average across a LED bank. Those boards not implementing a full bank can hook in via the LED class. We leave the compat hook in the machvec for now until those non-banked boards are able to migrate to the drivers/leds. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19sh: Cleanup board header directories.Paul Mundt
Now with the ide.h mess sorted out, most of these boards don't need their own directory. Move the headers out, and update the driver paths. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: machvec rework.Paul Mundt
Some more machvec overhauling and setup code cleanup. Kill off get_system_type() and platform_setup(), we can do these both through the machvec. While we're add it, kill off more useless mach.c's and drop some legacy cruft from setup.c. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Move voyagergx_reg.h to a more sensible place.Paul Mundt
Other boards require this as well, so move it out of the rts7751r2d directory. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: VoyagerGX cleanups and 8250 UART support.Paul Mundt
This adds the VoyagerGX UART to the RTS7751R2D setup code, and cleans up a few build issues. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Various cosmetic cleanups.Paul Mundt
We had quite a bit of whitespace damage, clean most of it up.. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Make hs7751rvoip/rts7751r2d use pm_power_off.Paul Mundt
These were previously sprinkled in machine_power_off(), though missed being updated when the rest of the boards switched over. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-23 11:05:27 +0000