summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/acpi/boot.c
AgeCommit message (Collapse)Author
2008-11-11ACPI: pci_link: remove acpi_irq_balance_set() interfaceBjorn Helgaas
This removes the acpi_irq_balance_set() interface from the PCI interrupt link driver. x86 used acpi_irq_balance_set() to tell the PCI interrupt link driver to configure links to minimize IRQ sharing. But the link driver can easily figure out whether to turn on IRQ balancing based on the IRQ model (PIC/IOAPIC/etc), so we can get rid of that external interface. It's better for the driver to figure this out at init-time. If we set it externally via the x86 code, the interface reduces modularity, and we depend on the fact that acpi_process_madt() happens before we process the kernel command line. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-23Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix section mismatch warning - apic_x2apic_phys x86: fix section mismatch warning - apic_x2apic_cluster x86: fix section mismatch warning - apic_x2apic_uv_x x86: fix section mismatch warning - apic_physflat x86: fix section mismatch warning - apic_flat x86: memtest fix use of reserve_early() x86 syscall.h: fix argument order x86/tlb_uv: remove strange mc146818rtc include x86: remove redundant KERN_DEBUG on pr_debug x86: do_boot_cpu - check if we have ESR register x86: MAINTAINERS change for AMD microcode patch loader x86/proc: fix /proc/cpuinfo cpu offline bug x86: call dmi-quirks for HP Laptops after early-quirks are executed x86, kexec: fix hang on i386 when panic occurs while console_sem is held MCE: Don't run 32bit machine checks with interrupts on x86: SB600: skip IRQ0 override if it is not routed to INT2 of IOAPIC x86: make variables static
2008-10-23Merge branch 'linus' into testLen Brown
Conflicts: MAINTAINERS arch/x86/kernel/acpi/boot.c arch/x86/kernel/acpi/sleep.c drivers/acpi/Kconfig drivers/pnp/Makefile drivers/pnp/quirks.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22x86: remove redundant KERN_DEBUG on pr_debugGustavo F. Padovan
pr_debug don't need KERN_DEBUG. Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-22x86: call dmi-quirks for HP Laptops after early-quirks are executedAndreas Herrmann
Impact: make warning message disappear - functionality unchanged Problems with bogus IRQ0 override of those laptops should be fixed with commits x86: SB600: skip IRQ0 override if it is not routed to INT2 of IOAPIC x86: SB450: skip IRQ0 override if it is not routed to INT2 of IOAPIC that introduce early-quirks based on chipset configuration. For further information, see http://bugzilla.kernel.org/show_bug.cgi?id=11516 Instead of removing the related dmi-quirks completely we'd like to keep them for (at least) one kernel version -- to double-check whether the early-quirks really took effect. But the dmi-quirks need to be called after early-quirks are executed. With this patch calling sequence for dmi-quriks is changed as follows: acpi_boot_table_init() (dmi-quirks) ... early_quirks() (detect bogus IRQ0 override) ... acpi_boot_init() (late dmi-quirks and setup IO APIC) Note: Plan is to remove the "late dmi-quirks" with next kernel version. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16genirq: remove artifacts from sparseirq removalIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: probe nr_irqs even only mptable is usedYinghai Lu
for !CONFIG_HAVE_SPARSE_IRQ fix: In file included from arch/x86/kernel/early-quirks.c:18: include/asm/io_apic.h: In function 'probe_nr_irqs': include/asm/io_apic.h:209: error: 'NR_IRQS' undeclared (first use in this function) include/asm/io_apic.h:209: error: (Each undeclared identifier is reported only once include/asm/io_apic.h:209: error: for each function it appears in.) v2: fix by Ingo Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86, irq: get nr_irqs from madtYinghai Lu
Until now, NR_IRQS was derived from black magic defines that had to be "large enough" to both accomodate NR_CPUS and MAX_NR_IO_APICs. This resulted in a way too large irq_desc[] array on most x86 systems. Especially with larger CPU masks, the size of irq_desc can spiral out of control quickly. So be smarter about it and use precise allocation instead: determine the default maximum possible IRQ number from the ACPI MADT. Use a minimum limit of at least 32 IRQs for broken BIOSes. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-15fix CONFIG_MMCONFIG=n build warningPavel Vasilyev
arch/x86/kernel/acpi/boot.c:100: warning: 'acpi_mcfg_64bit_base_addr' defined but not used http://bugzilla.kernel.org/show_bug.cgi?id=11743 Signed-off-by: Pavel Vasilyev <linuxoid@tochka.ru> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-12Merge branch 'linus' into x86/quirksIngo Molnar
Conflicts: arch/x86/kernel/early-quirks.c
2008-10-11Merge branch 'x86/apic' into x86-v28-for-linus-phase4-BIngo Molnar
Conflicts: arch/x86/kernel/apic_32.c arch/x86/kernel/apic_64.c arch/x86/kernel/setup.c drivers/pci/intel-iommu.c include/asm-x86/cpufeature.h include/asm-x86/dma-mapping.h
2008-10-10Merge phase #1 of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip This merges phase 1 of the x86 tree, which is a collection of branches: x86/alternatives, x86/cleanups, x86/commandline, x86/crashdump, x86/debug, x86/defconfig, x86/doc, x86/exports, x86/fpu, x86/gart, x86/idle, x86/mm, x86/mtrr, x86/nmi-watchdog, x86/oprofile, x86/paravirt, x86/reboot, x86/sparse-fixes, x86/tsc, x86/urgent and x86/vmalloc and as Ingo says: "these are the easiest, purely independent x86 topics with no conflicts, in one nice Octopus merge". * 'x86-v28-for-linus-phase1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (147 commits) x86: mtrr_cleanup: treat WRPROT as UNCACHEABLE x86: mtrr_cleanup: first 1M may be covered in var mtrrs x86: mtrr_cleanup: print out correct type v2 x86: trivial printk fix in efi.c x86, debug: mtrr_cleanup print out var mtrr before change it x86: mtrr_cleanup try gran_size to less than 1M, v3 x86: mtrr_cleanup try gran_size to less than 1M, cleanup x86: change MTRR_SANITIZER to def_bool y x86, debug printouts: IOMMU setup failures should not be KERN_ERR x86: export set_memory_ro and set_memory_rw x86: mtrr_cleanup try gran_size to less than 1M x86: mtrr_cleanup prepare to make gran_size to less 1M x86: mtrr_cleanup safe to get more spare regs now x86_64: be less annoying on boot, v2 x86: mtrr_cleanup hole size should be less than half of chunk_size, v2 x86: add mtrr_cleanup_debug command line x86: mtrr_cleanup optimization, v2 x86: don't need to go to chunksize to 4G x86_64: be less annoying on boot x86, olpc: fix endian bug in openfirmware workaround ...
2008-10-07x86: SB450: deprioritize DMI quirksIngo Molnar
This PCI ID based quick should be a full solution for the IRQ0 override related slowdown problem on SB450 based systems: 33fb0e4: x86: SB450: skip IRQ0 override if it is not routed to INT2 of IOAPIC Emit a warning in those cases where the DMI quirk triggers but the PCI ID based quirk didnt. If this warning does not trigger then we can phase out the DMI quirks. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-06x86 ACPI: Blacklist two HP machines with buggy BIOSesRafael J. Wysocki
There is a bug in the BIOSes of some HP boxes with AMD Turions which connects IO-APIC pins with ACPI thermal trip points in such a way that if the state of the IO-APIC is not as expected by the (buggy) BIOS, the thermal trip points are set to insanely low values (usually all of them become 16 degrees Celsius). As a result, thermal throttling kicks in and knock the system down to its shoes. Unfortunately some of the recent IO-APIC changes made the bug show up. To prevent this from happening, blacklist machines that are known to be affected (nx6115 and 6715b in this particular case). This fixes http://bugzilla.kernel.org/show_bug.cgi?id=11516 listed as a regression from 2.6.26. On my box it was caused by: commit 691874fa96d6349a8b60f8ea9c2bae52ece79941 Author: Maciej W. Rozycki <macro@linux-mips.org> Date: Tue May 27 21:19:51 2008 +0100 x86: I/O APIC: timer through 8259A second-chance Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> and the whole story is described in this (huge) thread: http://marc.info/?l=linux-kernel&m=121358440508410&w=4 Matthew Garrett told us about that happening on the nx6125: http://marc.info/?l=linux-kernel&m=121396307411930&w=4 and then Maciej analysed the breakage on the basis of a DSDT from the nx6325: http://marc.info/?l=linux-kernel&m=121401068718826&w=4 As far as the Dmitry's and Jason's boxes are concerned, I recognized the symptoms and asked them to verify that the blacklisting helped. It appears that the buggy BIOS code has been copy-pasted to the entire range of machines, for no good reason. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Jason Vas Dias <jason.vas.dias@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-27x86: acpi: move acpi_mcfg_64bit_base_addr into CONFIG_PCI_MMCONFIGHiroshi Shimamoto
acpi_mcfg_64bit_base_addr is used when CONFIG_PCI_MMCONFIG is enabled. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21x86: fix apic version warningYinghai Lu
after following patch, commit 1b313f4a6d7bee7b2c034b3f1e203bc360a71cca Author: Cyrill Gorcunov <gorcunov@gmail.com> Date: Mon Aug 18 20:45:57 2008 +0400 x86: apic - generic_processor_info - use physid_set instead of phys_cpu and physids_or - set phys_cpu_present_map bit AFTER check for allowed number of processors - add checking for APIC valid version in 64bit mode (mostly not needed but added for merging purpose) - add apic_version definition for 64bit mode which is used now we are getting warning for acpi path on 64 bit system. make the 64-bit side fill in apic_version[] as well. [ mingo@elte.hu: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20Merge branch 'linus' into x86/cleanupsIngo Molnar
2008-08-13x86: allow MMCONFIG above 4GB on x86_64John Keller
SGI UV will have MMCFG base addresses that are greater than 4GB (32 bits). v2: Use CONFIG_RESOURCES_64BIT instead of CONFIG_X86_64. v3: Create a flag, that is set by platform specific code, to disable the > 4GB check. Signed-off-by: John Keller <jpk@sgi.com> Cc: jpk@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11arch/x86/kernel/acpi/boot.c: removed duplicated #includeHuang Weiyi
Removed duplicated include file <asm/genapic.h> in arch/x86/kernel/acpi/boot.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-22Merge branch 'linus' into x86/x2apicIngo Molnar
2008-07-21x86: convert Dprintk to pr_debugThomas Gleixner
There are a couple of places where (P)Dprintk is used which is an old compile time enabled printk wrapper. Convert it to the generic pr_debug(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-18Merge branch 'linus' into x86/x2apicIngo Molnar
2008-07-13x86: I/O APIC: remove an IRQ2-mask hackMaciej W. Rozycki
Now that IRQ2 is never made available to the I/O APIC, there is no need to special-case it and mask as a workaround for broken systems. Actually, because of the former, mask_IO_APIC_irq(2) is a no-op already. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x86: make read_apic_id return final apicidYinghai Lu
also remove GET_APIC_ID when read_apic_id is used. need to apply after [PATCH] x86: mach_apicdef.h need to include before smp.h Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x64, x2apic/intr-remap: add x2apic support, including enabling ↵Suresh Siddha
interrupt-remapping x2apic support. Interrupt-remapping must be enabled before enabling x2apic, this is needed to ensure that IO interrupts continue to work properly after the cpu mode is changed to x2apic(which uses 32bit extended physical/cluster apic id). On systems where apicid's are > 255, BIOS can handover the control to OS in x2apic mode. Or if the OS handover was in legacy xapic mode, check if it is capable of x2apic mode. And if we succeed in enabling Interrupt-remapping, then we can enable x2apic mode in the CPU. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x86: remove conflicting nx6325 and nx6125 quirksRafael J. Wysocki
We have two conflicting DMA-based quirks in there for the same set of boxes (HP nx6325 and nx6125) and one of them actually breaks my box. So remove the extra code. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: =?iso-8859-1?q?T=F6r=F6k_Edwin?= <edwintorok@gmail.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11x86: introduce max_low_pfn_mapped for 64-bitYinghai Lu
when more than 4g memory is installed, don't map the big hole below 4g. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, acpi: merge __acpi_map_tableYinghai Lu
and let 64-bit to fall back to use fixmap too. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86: build fix for "x86: fix C1E && nx6325 stability problem"Ingo Molnar
fix: arch/x86/kernel/acpi/boot.c: In function ‘dmi_ignore_irq0_timer_override’: arch/x86/kernel/acpi/boot.c:1443: error: implicit declaration of function ‘force_mask_ioapic_irq_2’ Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86: fix C1E && nx6325 stability problemRafael J. Wysocki
The problems are that, with the ACPI vs timer overring issue _fixed_, after using the box for some time (between several seconds and 1 hour, at random) processes get very high CPU loads (once I've got X using 107% of the CPU, for example) and the system becomes unresponsive, as though there were interrupts lost or something similar. Andreas Herrman reproduced similar problems: > Ok, now I've reproduced the stability problem. > - Using tip/master, > - reverting e38502eb8aa82314d5ab0eba45f50e6790dadd88 and > - applying your patch from this posting > http://marc.info/?l=linux-kernel&m=121539354224562&w=4 > > Starting X, firefox, gimp, tuxpaint and doing some drawing in tuxpaint > results in a slow system. Drawing is almost not possible anymore -- > Selections of new colors, cursors etc. is performed with huge delay > if it's performed at all. > > BTW, the code sets up timer IRQ as Virtual Wire IRQ: > > Jul 8 14:57:58 kodscha IO-APIC (apicid-pin) 2-22, 2-23 not connected. > Jul 8 14:57:58 kodscha ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > Jul 8 14:57:58 kodscha ...trying to set up timer as Virtual Wire IRQ... works. > > and both INT0 and INT2 of IOAPIC are masked: > > Jul 8 14:57:58 kodscha NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > Jul 8 14:57:58 kodscha 00 000 1 0 0 0 0 0 0 00 > Jul 8 14:57:58 kodscha 01 003 0 0 0 0 0 1 1 31 > Jul 8 14:57:58 kodscha 02 003 1 0 0 0 0 0 0 30 > > I've also seen strange CPU utilization -- with syslog-ng: > > top - 15:33:06 up 35 min, 4 users, load average: 1.70, 0.68, 0.37 > Tasks: 64 total, 4 running, 60 sleeping, 0 stopped, 0 zombie > Cpu0 : 0.0%us,100.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st > Cpu1 : 6.4%us, 87.2%sy, 0.0%ni, 5.8%id, 0.0%wa, 0.6%hi, 0.0%si, 0.0%st > Mem: 895384k total, 283568k used, 611816k free, 35492k buffers > Swap: 1959920k total, 0k used, 1959920k free, 163044k cached > > PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND > 4632 root 20 0 17216 800 580 S 104 0.1 0:34.22 syslog-ng > 28505 root 20 0 205m 11m 4024 S 6 1.3 0:21.16 X > 28518 root 20 0 56292 5652 4492 S 1 0.6 0:01.80 fluxbox > 1 root 20 0 3724 608 508 S 0 0.1 0:00.36 init > > So far I have no clue why C1E-idle in conjunction with virtual wire > mode causes this strange behaviour. > > ... and I start to think about the root cause of all this. > > I've performed similar tests under X with the IRQ0/INT0 configuration and > I did not see above symptoms. So lets fall back to the IRQ0/INT0 configuration on this box. This basically restores the dont-use-the-lapic-timer exception mechanism that was unconditional on this box prior commit 8750bf5 ("x86: add C1E aware idle function"). Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: check command line when CONFIG_X86_MPPARSE is not set, v2Yinghai Lu
if acpi=off, acpi=noirq and pci=noacpi, we need to disable apic. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08Merge branch 'x86/mpparse' into x86/develIngo Molnar
Conflicts: arch/x86/Kconfig arch/x86/kernel/io_apic_32.c arch/x86/kernel/setup_64.c arch/x86/mm/init_32.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86, ioapic, acpi quirk: disable IRQ 0 through I/O APIC for some HP systemsMatthew Garrett
Some HP laptops have a problem with their DSDT reporting as HP/SB400/10000, which includes some code which overrides all temperature trip points to 16C if the INTIN2 input of the I/O APIC is enabled. This input is incorrectly designated the ISA IRQ 0 via an interrupt source override even though it is wired to the output of the master 8259A and INTIN0 is not connected at all. So far two models have been identified, namely nx6125 and nx6325. Use a knob provided by the I/O APIC interrupt registration code to abandon any attempts to route IRQ 0 through the I/O APIC for these systems. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Len Brown <lenb@kernel.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86, ioapic, acpi: add a knob to disable IRQ 0 through I/O APICMaciej W. Rozycki
As discovered recently some systems exhibit problems when the 8254 timer IRQ is routed through the I/O APIC. These problems do not affect the timer IRQ itself and therefore cannot be detected when the correctness of operation of the interrupt is verified in check_timer(). Therefore the I/O APIC path of the timer IRQ has to be disabled entirely. This is a change that lets platforms ask for the timer IRQ not to be registered in the I/O APIC interrupt tables. The local APIC and ExtINTA paths are unaffected. This request is only taken into account for ACPI platforms as MP table systems seem unaffected so far. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Len Brown <lenb@kernel.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: update mptable fix with no ioapic v2Yinghai Lu
if the system doesn't have ioapic, we don't need to store entries for mptable update also let mp_config_acpi_gsi not call func in mpparse so later could decouple mpparse with acpi more easily Reported-by: Daniel Exner <dex@dragonslave.de> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daniel Exner <dex@dragonslave.de> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: use dstapic in mp_config_acpi_legacy_irqsYinghai Lu
so we don't get the same value multiple times. also make mp_config_acpi_legacy_irqs more readable by moving assignments together. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: keep MP_intsrc_info untouched if we do not update mptableYinghai Lu
Daniel Exner reported IO-APIC enumeration breakage in linux-next. Alexey Starikovskiy found out that it might be related to commit 2944e16b25 "x86: update mptable". use enable_update_mptable to decide if need check before add mp_irqs array. Reported-by: Daniel Exner <webmaster@dragonslave.de> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08Merge branch 'linus' into tmp.x86.mpparse.newIngo Molnar
2008-06-16Merge branch 'linus' into x86/irqtip-x86-irq-2008-06-16_09.27_MonIngo Molnar
2008-06-10x86: make generic arch support NUMAQYinghai Lu
... so it could fall back to normal numa and we'd reduce the impact of the NUMAQ subarch. NUMAQ depends on GENERICARCH also decouple genericarch numa from acpi. also make it fall back to bigsmp if apicid > 8. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-04x86: fix APIC warning on 32bit v2Yinghai Lu
for http://bugzilla.kernel.org/show_bug.cgi?id=10613 BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor) v2: fix 64 bit compilation Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Gabriel C <nix.or.die@googlemail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-06-03x86: update mptableYinghai Lu
make mptable to be consistent with acpi routing, so we could: 1. kexec kernel with acpi=off 2. work around BIOSes where acpi routing is working, but mptable is not right, so can use kernel/kexec to start other OSes that don't have good acpi support. command line: update_mptable Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25x86: fix mpparse/acpi interactionAlexey Starikovskiy
Sitsofe Wheeler reported boot problems on linux-next. It looks like the same issue as found by Soeren Sandman in 7575217f656a93, "x86: initialize all fields of mp_irqs[mp_irq_entries]". But his fix is also not complete, as dstapic is used before it assigned. Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com> Bisected-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-25x86: initialize all fields of mp_irqs[mp_irq_entries]Soeren Sandmann
Commit "x86: make config_irqsrc not MPspec specific" introduced some uses of uninitialized fields in mp_config_acpi_legacy_irqs(). I need the following patch to get sched-devel/master to boot. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-25x86: make config_irqsrc not MPspec specificAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25x86: make struct config_ioapic not MPspec specificAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25x86: make mp_ioapic_routing definition localAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25x86: complete move ACPI from mpparse.cAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25x86: move mp_ioapic_routing to mpparse and make it staticThomas Gleixner
mpparse is the only user of mp_ioapic_routing. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-12x86: move eisa_set_level_irq declaration to headerThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-28 16:19:25 +0000