summaryrefslogtreecommitdiff
path: root/arch/x86/kvm/svm.c
AgeCommit message (Collapse)Author
2019-11-16KVM: vmx, svm: always run with EFER.NXE=1 when shadow paging is activePaolo Bonzini
commit 9167ab79936206118cc60e47dcb926c3489f3bd5 upstream. VMX already does so if the host has SMEP, in order to support the combination of CR0.WP=1 and CR4.SMEP=1. However, it is perfectly safe to always do so, and in fact VMX already ends up running with EFER.NXE=1 on old processors that lack the "load EFER" controls, because it may help avoiding a slow MSR write. Removing all the conditionals simplifies the code. SVM does not have similar code, but it should since recent AMD processors do support SMEP. So this patch also makes the code for the two vendors more similar while fixing NPT=0, CR0.WP=1 and CR4.SMEP=1 on AMD processors. Cc: Joerg Roedel <jroedel@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [bwh: Backported to 4.9: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31kvm: svm/avic: fix off-by-one in checking host APIC IDSuthikulpanit, Suravee
commit c9bcd3e3335d0a29d89fabd2c385e1b989e6f1b0 upstream. Current logic does not allow VCPU to be loaded onto CPU with APIC ID 255. This should be allowed since the host physical APIC ID field in the AVIC Physical APIC table entry is an 8-bit value, and APIC ID 255 is valid in system with x2APIC enabled. Instead, do not allow VCPU load if the host APIC ID cannot be represented by an 8-bit value. Also, use the more appropriate AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK instead of AVIC_MAX_PHYSICAL_ID_COUNT. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14x86/bugs: Add AMD's SPEC_CTRL MSR usageKonrad Rzeszutek Wilk
commit 6ac2f49edb1ef5446089c7c660017732886d62d6 upstream. The AMD document outlining the SSBD handling 124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf mentions that if CPUID 8000_0008.EBX[24] is set we should be using the SPEC_CTRL MSR (0x48) over the VIRT SPEC_CTRL MSR (0xC001_011f) for speculative store bypass disable. This in effect means we should clear the X86_FEATURE_VIRT_SSBD flag so that we would prefer the SPEC_CTRL MSR. See the document titled: 124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf A copy of this document is available at https://bugzilla.kernel.org/show_bug.cgi?id=199889 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: kvm@vger.kernel.org Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: andrew.cooper3@citrix.com Cc: Joerg Roedel <joro@8bytes.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20180601145921.9500-3-konrad.wilk@oracle.com [bwh: Backported to 4.9: - Update feature test in guest_cpuid_has_spec_ctrl() instead of svm_{get,set}_msr() - Adjust context, indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27Revert "svm: Fix AVIC incomplete IPI emulation"Suthikulpanit, Suravee
commit 4a58038b9e420276157785afa0a0bbb4b9bc2265 upstream. This reverts commit bb218fbcfaaa3b115d4cd7a43c0ca164f3a96e57. As Oren Twaig pointed out the old discussion: https://patchwork.kernel.org/patch/8292231/ that the change coud potentially cause an extra IPI to be sent to the destination vcpu because the AVIC hardware already set the IRR bit before the incomplete IPI #VMEXIT with id=1 (target vcpu is not running). Since writting to ICR and ICR2 will also set the IRR. If something triggers the destination vcpu to get scheduled before the emulation finishes, then this could result in an additional IPI. Also, the issue mentioned in the commit bb218fbcfaaa was misdiagnosed. Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reported-by: Oren Twaig <oren@scalemp.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting ↵Vitaly Kuznetsov
to L1 [ Upstream commit 619ad846fc3452adaf71ca246c5aa711e2055398 ] kvm-unit-tests' eventinj "NMI failing on IDT" test results in NMI being delivered to the host (L1) when it's running nested. The problem seems to be: svm_complete_interrupts() raises 'nmi_injected' flag but later we decide to reflect EXIT_NPF to L1. The flag remains pending and we do NMI injection upon entry so it got delivered to L1 instead of L2. It seems that VMX code solves the same issue in prepare_vmcs12(), this was introduced with code refactoring in commit 5f3d5799974b ("KVM: nVMX: Rework event injection and recovery"). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05svm: Fix AVIC incomplete IPI emulationSuravee Suthikulpanit
[ Upstream commit bb218fbcfaaa3b115d4cd7a43c0ca164f3a96e57 ] In case of incomplete IPI with invalid interrupt type, the current SVM driver does not properly emulate the IPI, and fails to boot FreeBSD guests with multiple vcpus when enabling AVIC. Fix this by update APIC ICR high/low registers, which also emulate sending the IPI. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12KVM: x86: svm: report MSR_IA32_MCG_EXT_CTL as unsupportedVitaly Kuznetsov
[ Upstream commit e87555e550cef4941579cd879759a7c0dee24e68 ] AMD doesn't seem to implement MSR_IA32_MCG_EXT_CTL and svm code in kvm knows nothing about it, however, this MSR is among emulated_msrs and thus returned with KVM_GET_MSR_INDEX_LIST. The consequent KVM_GET_MSRS, of course, fails. Report the MSR as unsupported to not confuse userspace. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-08svm: Add mutex_lock to protect apic_access_page_done on AMD systemsWei Wang
commit 30510387a5e45bfcf8190e03ec7aa15b295828e2 upstream. There is a race condition when accessing kvm->arch.apic_access_page_done. Due to it, x86_set_memory_region will fail when creating the second vcpu for a svm guest. Add a mutex_lock to serialize the accesses to apic_access_page_done. This lock is also used by vmx for the same purpose. Signed-off-by: Wei Wang <wawei@amazon.de> Signed-off-by: Amadeusz Juskowiak <ajusk@amazon.de> Signed-off-by: Julian Stecklina <jsteckli@amazon.de> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by: Joerg Roedel <jroedel@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05kvm: svm: Ensure an IBPB on all affected CPUs when freeing a vmcbJim Mattson
commit fd65d3142f734bc4376053c8d75670041903134d upstream. Previously, we only called indirect_branch_prediction_barrier on the logical CPU that freed a vmcb. This function should be called on all logical CPUs that last loaded the vmcb in question. Fixes: 15d45071523d ("KVM/x86: Add IBPB support") Reported-by: Neel Natu <neelnatu@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05KVM: x86: SVM: Call x86_spec_ctrl_set_guest/host() with interrupts disabledThomas Gleixner
commit 024d83cadc6b2af027e473720f3c3da97496c318 upstream. Mikhail reported the following lockdep splat: WARNING: possible irq lock inversion dependency detected CPU 0/KVM/10284 just changed the state of lock: 000000000d538a88 (&st->lock){+...}, at: speculative_store_bypass_update+0x10b/0x170 but this lock was taken by another, HARDIRQ-safe lock in the past: (&(&sighand->siglock)->rlock){-.-.} and interrupts could create inverse lock ordering between them. Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&st->lock); local_irq_disable(); lock(&(&sighand->siglock)->rlock); lock(&st->lock); <Interrupt> lock(&(&sighand->siglock)->rlock); *** DEADLOCK *** The code path which connects those locks is: speculative_store_bypass_update() ssb_prctl_set() do_seccomp() do_syscall_64() In svm_vcpu_run() speculative_store_bypass_update() is called with interupts enabled via x86_virt_spec_ctrl_set_guest/host(). This is actually a false positive, because GIF=0 so interrupts are disabled even if IF=1; however, we can easily move the invocations of x86_virt_spec_ctrl_set_guest/host() into the interrupt disabled region to cure it, and it's a good idea to keep the GIF=0/IF=1 area as small and self-contained as possible. Fixes: 1f50ddb4f418 ("x86/speculation: Handle HT correctly on AMD") Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: kvm@vger.kernel.org Cc: x86@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-15KVM: X86: Allow userspace to define the microcode versionWanpeng Li
commit 518e7b94817abed94becfe6a44f1ece0d4745afe upstream Linux (among the others) has checks to make sure that certain features aren't enabled on a certain family/model/stepping if the microcode version isn't greater than or equal to a known good version. By exposing the real microcode version, we're preventing buggy guests that don't check that they are running virtualized (i.e., they should trust the hypervisor) from disabling features that are effectively not buggy. Suggested-by: Filippo Sironi <sironi@amazon.de> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-15KVM: SVM: Add MSR-based feature support for serializing LFENCETom Lendacky
commit d1d93fa90f1afa926cb060b7f78ab01a65705b4d upstream In order to determine if LFENCE is a serializing instruction on AMD processors, MSR 0xc0011029 (MSR_F10H_DECFG) must be read and the state of bit 1 checked. This patch will add support to allow a guest to properly make this determination. Add the MSR feature callback operation to svm.c and add MSR 0xc0011029 to the list of MSR-based features. If LFENCE is serializing, then the feature is supported, allowing the hypervisor to set the value of the MSR that guest will see. Support is also added to write (hypervisor only) and read the MSR value for the guest. A write by the guest will result in a #GP. A read by the guest will return the value as set by the host. In this way, the support to expose the feature to the guest is controlled by the hypervisor. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-15KVM: x86: Add a framework for supporting MSR-based featuresTom Lendacky
commit 801e459a6f3a63af9d447e6249088c76ae16efc4 upstream Provide a new KVM capability that allows bits within MSRs to be recognized as features. Two new ioctls are added to the /dev/kvm ioctl routine to retrieve the list of these MSRs and then retrieve their values. A kvm_x86_ops callback is used to determine support for the listed MSR-based features. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [Tweaked documentation. - Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-15x86/KVM/VMX: Add L1D flush logicPaolo Bonzini
commit c595ceee45707f00f64f61c54fb64ef0cc0b4e85 upstream Add the logic for flushing L1D on VMENTER. The flush depends on the static key being enabled and the new l1tf_flush_l1d flag being set. The flags is set: - Always, if the flush module parameter is 'always' - Conditionally at: - Entry to vcpu_run(), i.e. after executing user space - From the sched_in notifier, i.e. when switching to a vCPU thread. - From vmexit handlers which are considered unsafe, i.e. where sensitive data can be brought into L1D: - The emulator, which could be a good target for other speculative execution-based threats, - The MMU, which can bring host page tables in the L1 cache. - External interrupts - Nested operations that require the MMU (see above). That is vmptrld, vmptrst, vmclear,vmwrite,vmread. - When handling invept,invvpid [ tglx: Split out from combo patch and reduced to a single flag ] [ dwmw2: Backported to 4.9, set l1tf_flush_l1d in svm/vmx code ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-05objtool, x86: Add several functions and files to the objtool whitelistJosh Poimboeuf
commit c207aee48037abca71c669cbec407b9891965c34 upstream. In preparation for an objtool rewrite which will have broader checks, whitelist functions and files which cause problems because they do unusual things with the stack. These whitelists serve as a TODO list for which functions and files don't yet have undwarf unwinder coverage. Eventually most of the whitelists can be removed in favor of manual CFI hint annotations or objtool improvements. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/7f934a5d707a574bda33ea282e9478e627fb1829.1498659915.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22KVM: SVM: Implement VIRT_SPEC_CTRL support for SSBDTom Lendacky
commit bc226f07dcd3c9ef0b7f6236fe356ea4a9cb4769 upstream Expose the new virtualized architectural mechanism, VIRT_SSBD, for using speculative store bypass disable (SSBD) under SVM. This will allow guests to use SSBD on hardware that uses non-architectural mechanisms for enabling SSBD. [ tglx: Folded the migration fixup from Paolo Bonzini ] Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22x86/bugs, KVM: Extend speculation control for VIRT_SPEC_CTRLThomas Gleixner
commit ccbcd2674472a978b48c91c1fbfb66c0ff959f24 upstream AMD is proposing a VIRT_SPEC_CTRL MSR to handle the Speculative Store Bypass Disable via MSR_AMD64_LS_CFG so that guests do not have to care about the bit position of the SSBD bit and thus facilitate migration. Also, the sibling coordination on Family 17H CPUs can only be done on the host. Extend x86_spec_ctrl_set_guest() and x86_spec_ctrl_restore_host() with an extra argument for the VIRT_SPEC_CTRL MSR. Hand in 0 from VMX and in SVM add a new virt_spec_ctrl member to the CPU data structure which is going to be used in later patches for the actual implementation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22KVM: SVM: Move spec control call after restore of GSThomas Gleixner
commit 15e6c22fd8e5a42c5ed6d487b7c9fe44c2517765 upstream svm_vcpu_run() invokes x86_spec_ctrl_restore_host() after VMEXIT, but before the host GS is restored. x86_spec_ctrl_restore_host() uses 'current' to determine the host SSBD state of the thread. 'current' is GS based, but host GS is not yet restored and the access causes a triple fault. Move the call after the host GS restore. Fixes: 885f82bfbc6f x86/process: Allow runtime control of Speculative Store Bypass Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22x86/speculation: Create spec-ctrl.h to avoid include hellThomas Gleixner
commit 28a2775217b17208811fa43a9e96bd1fdf417b86 upstream Having everything in nospec-branch.h creates a hell of dependencies when adding the prctl based switching mechanism. Move everything which is not required in nospec-branch.h to spec-ctrl.h and fix up the includes in the relevant files. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22x86/KVM/VMX: Expose SPEC_CTRL Bit(2) to the guestKonrad Rzeszutek Wilk
commit da39556f66f5cfe8f9c989206974f1cb16ca5d7c upstream Expose the CPUID.7.EDX[31] bit to the guest, and also guard against various combinations of SPEC_CTRL MSR values. The handling of the MSR (to take into account the host value of SPEC_CTRL Bit(2)) is taken care of in patch: KVM/SVM/VMX/x86/spectre_v2: Support the combination of guest and host IBRS Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> [dwmw2: Handle 4.9 guest CPUID differences, rename guest_cpu_has_ibrs() → guest_cpu_has_spec_ctrl()] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22x86/bugs, KVM: Support the combination of guest and host IBRSKonrad Rzeszutek Wilk
commit 5cf687548705412da47c9cec342fd952d71ed3d5 upstream A guest may modify the SPEC_CTRL MSR from the value used by the kernel. Since the kernel doesn't use IBRS, this means a value of zero is what is needed in the host. But the 336996-Speculative-Execution-Side-Channel-Mitigations.pdf refers to the other bits as reserved so the kernel should respect the boot time SPEC_CTRL value and use that. This allows to deal with future extensions to the SPEC_CTRL interface if any at all. Note: This uses wrmsrl() instead of native_wrmsl(). I does not make any difference as paravirt will over-write the callq *0xfff.. with the wrmsrl assembler code. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13KVM: SVM: do not zero out segment attributes if segment is unusable or not ↵Roman Pen
present [ Upstream commit d9c1b5431d5f0e07575db785a022bce91051ac1d ] This is a fix for the problem [1], where VMCB.CPL was set to 0 and interrupt was taken on userspace stack. The root cause lies in the specific AMD CPU behaviour which manifests itself as unusable segment attributes on SYSRET. The corresponding work around for the kernel is the following: 61f01dd941ba ("x86_64, asm: Work around AMD SYSRET SS descriptor attribute issue") In other turn virtualization side treated unusable segment incorrectly and restored CPL from SS attributes, which were zeroed out few lines above. In current patch it is assured only that P bit is cleared in VMCB.save state and segment attributes are not zeroed out if segment is not presented or is unusable, therefore CPL can be safely restored from DPL field. This is only one part of the fix, since QEMU side should be fixed accordingly not to zero out attributes on its side. Corresponding patch will follow. [1] Message id: CAJrWOzD6Xq==b-zYCDdFLgSRMPM-NkNuTSDFEtX=7MreT45i7Q@mail.gmail.com Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com> Signed-off-by: Mikhail Sennikovskii <mikhail.sennikovskii@profitbricks.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim KrÄmář <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22kvm/svm: Setup MCG_CAP on AMD properlyBorislav Petkov
[ Upstream commit 74f169090b6f36b867c9df0454366dd9af6f62d1 ] MCG_CAP[63:9] bits are reserved on AMD. However, on an AMD guest, this MSR returns 0x100010a. More specifically, bit 24 is set, which is simply wrong. That bit is MCG_SER_P and is present only on Intel. Thus, clean up the reserved bits in order not to confuse guests. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR ↵Paolo Bonzini
path as unlikely() commit 946fbbc13dce68902f64515b610eeb2a6c3d7a64 upstream. vmx_vcpu_run() and svm_vcpu_run() are large functions, and giving branch hints to the compiler can actually make a substantial cycle difference by keeping the fast path contiguous in memory. With this optimization, the retpoline-guest/retpoline-host case is about 50 cycles faster. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180222154318.20361-3-pbonzini@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11KVM/x86: Remove indirect MSR op calls from SPEC_CTRLPaolo Bonzini
commit ecb586bd29c99fb4de599dec388658e74388daad upstream. Having a paravirt indirect call in the IBRS restore path is not a good idea, since we are trying to protect from speculative execution of bogus indirect branch targets. It is also slower, so use native_wrmsrl() on the vmentry path too. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Fixes: d28b387fb74da95d69d2615732f50cceb38e9a4d Link: http://lkml.kernel.org/r/20180222154318.20361-2-pbonzini@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-13KVM/SVM: Allow direct access to MSR_IA32_SPEC_CTRLKarimAllah Ahmed
(cherry picked from commit b2ac58f90540e39324e7a29a7ad471407ae0bf48) [ Based on a patch from Paolo Bonzini <pbonzini@redhat.com> ] ... basically doing exactly what we do for VMX: - Passthrough SPEC_CTRL to guests (if enabled in guest CPUID) - Save and restore SPEC_CTRL around VMExit and VMEntry only if the guest actually used it. Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jun Nakajima <jun.nakajima@intel.com> Cc: kvm@vger.kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ashok Raj <ashok.raj@intel.com> Link: https://lkml.kernel.org/r/1517669783-20732-1-git-send-email-karahmed@amazon.de Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-13KVM/x86: Add IBPB supportAshok Raj
(cherry picked from commit 15d45071523d89b3fb7372e2135fbd72f6af9506) The Indirect Branch Predictor Barrier (IBPB) is an indirect branch control mechanism. It keeps earlier branches from influencing later ones. Unlike IBRS and STIBP, IBPB does not define a new mode of operation. It's a command that ensures predicted branch targets aren't used after the barrier. Although IBRS and IBPB are enumerated by the same CPUID enumeration, IBPB is very different. IBPB helps mitigate against three potential attacks: * Mitigate guests from being attacked by other guests. - This is addressed by issing IBPB when we do a guest switch. * Mitigate attacks from guest/ring3->host/ring3. These would require a IBPB during context switch in host, or after VMEXIT. The host process has two ways to mitigate - Either it can be compiled with retpoline - If its going through context switch, and has set !dumpable then there is a IBPB in that path. (Tim's patch: https://patchwork.kernel.org/patch/10192871) - The case where after a VMEXIT you return back to Qemu might make Qemu attackable from guest when Qemu isn't compiled with retpoline. There are issues reported when doing IBPB on every VMEXIT that resulted in some tsc calibration woes in guest. * Mitigate guest/ring0->host/ring0 attacks. When host kernel is using retpoline it is safe against these attacks. If host kernel isn't using retpoline we might need to do a IBPB flush on every VMEXIT. Even when using retpoline for indirect calls, in certain conditions 'ret' can use the BTB on Skylake-era CPUs. There are other mitigations available like RSB stuffing/clearing. * IBPB is issued only for SVM during svm_free_vcpu(). VMX has a vmclear and SVM doesn't. Follow discussion here: https://lkml.org/lkml/2018/1/15/146 Please refer to the following spec for more details on the enumeration and control. Refer here to get documentation about mitigations. https://software.intel.com/en-us/side-channel-security-support [peterz: rebase and changelog rewrite] [karahmed: - rebase - vmx: expose PRED_CMD if guest has it in CPUID - svm: only pass through IBPB if guest has it in CPUID - vmx: support !cpu_has_vmx_msr_bitmap()] - vmx: support nested] [dwmw2: Expose CPUID bit too (AMD IBPB only for now as we lack IBRS) PRED_CMD is a write-only MSR] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: kvm@vger.kernel.org Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Jun Nakajima <jun.nakajima@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Link: http://lkml.kernel.org/r/1515720739-43819-6-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/1517522386-18410-3-git-send-email-karahmed@amazon.de Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17x86/retpoline: Fill return stack buffer on vmexitDavid Woodhouse
commit 117cc7a908c83697b0b737d15ae1eb5943afe35b upstream. In accordance with the Intel and AMD documentation, we need to overwrite all entries in the RSB on exiting a guest, to prevent malicious branch target predictions from affecting the host kernel. This is needed both for retpoline and for IBRS. [ak: numbers again for the RSB stuffing labels] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515755487-8524-1-git-send-email-dwmw@amazon.co.uk Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17kvm: vmx: Scrub hardware GPRs at VM-exitJim Mattson
commit 0cb5b30698fdc8f6b4646012e3acb4ddce430788 upstream. Guest GPR values are live in the hardware GPRs at VM-exit. Do not leave any guest values in hardware GPRs after the guest GPR values are saved to the vcpu_vmx structure. This is a partial mitigation for CVE 2017-5715 and CVE 2017-5753. Specifically, it defeats the Project Zero PoC for CVE 2017-5715. Suggested-by: Eric Northup <digitaleric@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Eric Northup <digitaleric@google.com> Reviewed-by: Benjamin Serebrin <serebrin@google.com> Reviewed-by: Andrew Honig <ahonig@google.com> [Paolo: Add AMD bits, Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25kvm: fix usage of uninit spinlock in avic_vm_destroy()Dmitry Vyukov
[ Upstream commit 3863dff0c3dd72984395c93b12383b393c5c3989 ] If avic is not enabled, avic_vm_init() does nothing and returns early. However, avic_vm_destroy() still tries to destroy what hasn't been created. The only bad consequence of this now is that avic_vm_destroy() uses svm_vm_data_hash_lock that hasn't been initialized (and is not meant to be used at all if avic is not enabled). Return early from avic_vm_destroy() if avic is not enabled. It has nothing to destroy. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: kvm@vger.kernel.org Cc: syzkaller@googlegroups.com Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05KVM: x86: Exit to user-mode on #UD intercept when emulator requiresLiran Alon
commit 61cb57c9ed631c95b54f8e9090c89d18b3695b3c upstream. Instruction emulation after trapping a #UD exception can result in an MMIO access, for example when emulating a MOVBE on a processor that doesn't support the instruction. In this case, the #UD vmexit handler must exit to user mode, but there wasn't any code to do so. Add it for both VMX and SVM. Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30KVM: SVM: obey guest PATPaolo Bonzini
commit 15038e14724799b8c205beb5f20f9e54896013c3 upstream. For many years some users of assigned devices have reported worse performance on AMD processors with NPT than on AMD without NPT, Intel or bare metal. The reason turned out to be that SVM is discarding the guest PAT setting and uses the default (PA0=PA4=WB, PA1=PA5=WT, PA2=PA6=UC-, PA3=UC). The guest might be using a different setting, and especially might want write combining but isn't getting it (instead getting slow UC or UC- accesses). Thanks a lot to geoff@hostfission.com for noticing the relation to the g_pat setting. The patch has been tested also by a bunch of people on VFIO users forums. Fixes: 709ddebf81cb40e3c36c6109a7892e8b93a09464 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196409 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: Nick Sarnie <commendsarnex@gmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-02KVM: x86: drop TSC offsetting kvm_x86_ops to fix KVM_GET/SET_CLOCKPaolo Bonzini
Since commit a545ab6a0085 ("kvm: x86: add tsc_offset field to struct kvm_vcpu_arch", 2016-09-07) the offset between host and L1 TSC is cached and need not be fished out of the VMCS or VMCB. This means that we can implement adjust_tsc_offset_guest and read_l1_tsc entirely in generic code. The simplification is particularly significant for VMX code, where vmx->nested.vmcs01_tsc_offset was duplicating what is now in vcpu->arch.tsc_offset. Therefore the vmcs01_tsc_offset can be dropped completely. More importantly, this fixes KVM_GET_CLOCK/KVM_SET_CLOCK which, after commit 108b249c453d ("KVM: x86: introduce get_kvmclock_ns", 2016-09-01) called read_l1_tsc while the VMCS was not loaded. It thus returned bogus values on Intel CPUs. Fixes: 108b249c453dd7132599ab6dc7e435a7036c193f Reported-by: Roman Kagan <rkagan@virtuozzo.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-06Merge tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Radim Krčmář: "All architectures: - move `make kvmconfig` stubs from x86 - use 64 bits for debugfs stats ARM: - Important fixes for not using an in-kernel irqchip - handle SError exceptions and present them to guests if appropriate - proxying of GICV access at EL2 if guest mappings are unsafe - GICv3 on AArch32 on ARMv8 - preparations for GICv3 save/restore, including ABI docs - cleanups and a bit of optimizations MIPS: - A couple of fixes in preparation for supporting MIPS EVA host kernels - MIPS SMP host & TLB invalidation fixes PPC: - Fix the bug which caused guests to falsely report lockups - other minor fixes - a small optimization s390: - Lazy enablement of runtime instrumentation - up to 255 CPUs for nested guests - rework of machine check deliver - cleanups and fixes x86: - IOMMU part of AMD's AVIC for vmexit-less interrupt delivery - Hyper-V TSC page - per-vcpu tsc_offset in debugfs - accelerated INS/OUTS in nVMX - cleanups and fixes" * tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (140 commits) KVM: MIPS: Drop dubious EntryHi optimisation KVM: MIPS: Invalidate TLB by regenerating ASIDs KVM: MIPS: Split kernel/user ASID regeneration KVM: MIPS: Drop other CPU ASIDs on guest MMU changes KVM: arm/arm64: vgic: Don't flush/sync without a working vgic KVM: arm64: Require in-kernel irqchip for PMU support KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register KVM: PPC: Book3S PR: Support 64kB page size on POWER8E and POWER8NVL KVM: PPC: Book3S: Remove duplicate setting of the B field in tlbie KVM: PPC: BookE: Fix a sanity check KVM: PPC: Book3S HV: Take out virtual core piggybacking code KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread ARM: gic-v3: Work around definition of gic_write_bpr1 KVM: nVMX: Fix the NMI IDT-vectoring handling KVM: VMX: Enable MSR-BASED TPR shadow even if APICv is inactive KVM: nVMX: Fix reload apic access page warning kvmconfig: add virtio-gpu to config fragment config: move x86 kvm_guest.config to a common location arm64: KVM: Remove duplicating init code for setting VMID ARM: KVM: Support vgic-v3 ...
2016-09-20kvm: svm: fix unsigned compare less than zero comparisonColin Ian King
vm_data->avic_vm_id is a u32, so the check for a error return (less than zero) such as -EAGAIN from avic_get_next_vm_id currently has no effect whatsoever. Fix this by using a temporary int for the comparison and assign vm_data->avic_vm_id to this. I used an explicit u32 cast in the assignment to show why vm_data->avic_vm_id cannot be used in the assign/compare steps. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-16kvm: x86: drop read_tsc_offset()Luiz Capitulino
The TSC offset can now be read directly from struct kvm_arch_vcpu. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-08svm: Implements update_pi_irte hook to setup posted interruptSuravee Suthikulpanit
This patch implements update_pi_irte function hook to allow SVM communicate to IOMMU driver regarding how to set up IRTE for handling posted interrupt. In case AVIC is enabled, during vcpu_load/unload, SVM needs to update IOMMU IRTE with appropriate host physical APIC ID. Also, when vcpu_blocking/unblocking, SVM needs to update the is-running bit in the IOMMU IRTE. Both are achieved via calling amd_iommu_update_ga(). However, if GA mode is not enabled for the pass-through device, IOMMU driver will simply just return when calling amd_iommu_update_ga. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-08svm: Introduce AMD IOMMU avic_ga_log_notifierSuravee Suthikulpanit
This patch introduces avic_ga_log_notifier, which will be called by IOMMU driver whenever it handles the Guest vAPIC (GA) log entry. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-08svm: Introduces AVIC per-VM IDSuravee Suthikulpanit
Introduces per-VM AVIC ID and helper functions to manage the IDs. Currently, the ID will be used to implement 32-bit AVIC IOMMU GA tag. The ID is 24-bit one-based indexing value, and is managed via helper functions to get the next ID, or to free an ID once a VM is destroyed. There should be no ID conflict for any active VMs. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-10x86: Apply more __ro_after_init and constKees Cook
Guided by grsecurity's analogous __read_only markings in arch/x86, this applies several uses of __ro_after_init to structures that are only updated during __init, and const for some structures that are never updated. Additionally extends __init markings to some functions that are only used during __init, and cleans up some missing C99 style static initializers. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Brown <david.brown@linaro.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Krause <minipli@googlemail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: PaX Team <pageexec@freemail.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-hardening@lists.openwall.com Link: http://lkml.kernel.org/r/20160808232906.GA29731@www.outflux.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: - ARM: GICv3 ITS emulation and various fixes. Removal of the old VGIC implementation. - s390: support for trapping software breakpoints, nested virtualization (vSIE), the STHYI opcode, initial extensions for CPU model support. - MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups, preliminary to this and the upcoming support for hardware virtualization extensions. - x86: support for execute-only mappings in nested EPT; reduced vmexit latency for TSC deadline timer (by about 30%) on Intel hosts; support for more than 255 vCPUs. - PPC: bugfixes. * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits) KVM: PPC: Introduce KVM_CAP_PPC_HTM MIPS: Select HAVE_KVM for MIPS64_R{2,6} MIPS: KVM: Reset CP0_PageMask during host TLB flush MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX() MIPS: KVM: Sign extend MFC0/RDHWR results MIPS: KVM: Fix 64-bit big endian dynamic translation MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase MIPS: KVM: Use 64-bit CP0_EBase when appropriate MIPS: KVM: Set CP0_Status.KX on MIPS64 MIPS: KVM: Make entry code MIPS64 friendly MIPS: KVM: Use kmap instead of CKSEG0ADDR() MIPS: KVM: Use virt_to_phys() to get commpage PFN MIPS: Fix definition of KSEGX() for 64-bit KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD kvm: x86: nVMX: maintain internal copy of current VMCS KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures KVM: arm64: vgic-its: Simplify MAPI error handling KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers KVM: arm64: vgic-its: Turn device_id validation into generic ID validation ...
2016-07-01KVM: x86: use guest_exit_irqoffPaolo Bonzini
This gains a few clock cycles per vmexit. On Intel there is no need anymore to enable the interrupts in vmx_handle_external_intr, since we are using the "acknowledge interrupt on exit" feature. AMD needs to do that, and must be careful to avoid the interrupt shadow. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16kvm: svm: Do not support AVIC if not CONFIG_X86_LOCAL_APICSuravee Suthikulpanit
Add logic to disable AVIC #ifndef CONFIG_X86_LOCAL_APIC. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16kvm: svm: Fix implicit declaration for __default_cpu_present_to_apicid()Suravee Suthikulpanit
The commit 8221c1370056 ("svm: Manage vcpu load/unload when enable AVIC") introduces a build error due to implicit function declaration when #ifdef CONFIG_X86_32 and #ifndef CONFIG_X86_LOCAL_APIC (as reported by Kbuild test robot i386-randconfig-x0-06121009). So, this patch introduces kvm_cpu_get_apicid() wrapper around __default_cpu_present_to_apicid() with additional handling if CONFIG_X86_LOCAL_APIC is not defined. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: commit 8221c1370056 ("svm: Manage vcpu load/unload when enable AVIC") Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14KVM: x86: Fix typosAndrea Gelmini
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull second batch of KVM updates from Radim Krčmář: "General: - move kvm_stat tool from QEMU repo into tools/kvm/kvm_stat (kvm_stat had nothing to do with QEMU in the first place -- the tool only interprets debugfs) - expose per-vm statistics in debugfs and support them in kvm_stat (KVM always collected per-vm statistics, but they were summarised into global statistics) x86: - fix dynamic APICv (VMX was improperly configured and a guest could access host's APIC MSRs, CVE-2016-4440) - minor fixes ARM changes from Christoffer Dall: - new vgic reimplementation of our horribly broken legacy vgic implementation. The two implementations will live side-by-side (with the new being the configured default) for one kernel release and then we'll remove the legacy one. - fix for a non-critical issue with virtual abort injection to guests" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (70 commits) tools: kvm_stat: Add comments tools: kvm_stat: Introduce pid monitoring KVM: Create debugfs dir and stat files for each VM MAINTAINERS: Add kvm tools tools: kvm_stat: Powerpc related fixes tools: Add kvm_stat man page tools: Add kvm_stat vm monitor script kvm:vmx: more complete state update on APICv on/off KVM: SVM: Add more SVM_EXIT_REASONS KVM: Unify traced vector format svm: bitwise vs logical op typo KVM: arm/arm64: vgic-new: Synchronize changes to active state KVM: arm/arm64: vgic-new: enable build KVM: arm/arm64: vgic-new: implement mapped IRQ handling KVM: arm/arm64: vgic-new: Wire up irqfd injection KVM: arm/arm64: vgic-new: Add vgic_v2/v3_enable KVM: arm/arm64: vgic-new: vgic_init: implement map_resources KVM: arm/arm64: vgic-new: vgic_init: implement vgic_init KVM: arm/arm64: vgic-new: vgic_init: implement vgic_create KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_init ...
2016-05-24svm: bitwise vs logical op typoDan Carpenter
These were supposed to be a bitwise operation but there is a typo. The result is mostly harmless, but sparse correctly complains. Fixes: 44a95dae1d22 ('KVM: x86: Detect and Initialize AVIC support') Fixes: 18f40c53e10f ('svm: Add VMEXIT handlers for AVIC') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "Small release overall. x86: - miscellaneous fixes - AVIC support (local APIC virtualization, AMD version) s390: - polling for interrupts after a VCPU goes to halted state is now enabled for s390 - use hardware provided information about facility bits that do not need any hypervisor activity, and other fixes for cpu models and facilities - improve perf output - floating interrupt controller improvements. MIPS: - miscellaneous fixes PPC: - bugfixes only ARM: - 16K page size support - generic firmware probing layer for timer and GIC Christoffer Dall (KVM-ARM maintainer) says: "There are a few changes in this pull request touching things outside KVM, but they should all carry the necessary acks and it made the merge process much easier to do it this way." though actually the irqchip maintainers' acks didn't make it into the patches. Marc Zyngier, who is both irqchip and KVM-ARM maintainer, later acked at http://mid.gmane.org/573351D1.4060303@arm.com ('more formally and for documentation purposes')" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (82 commits) KVM: MTRR: remove MSR 0x2f8 KVM: x86: make hwapic_isr_update and hwapic_irr_update look the same svm: Manage vcpu load/unload when enable AVIC svm: Do not intercept CR8 when enable AVIC svm: Do not expose x2APIC when enable AVIC KVM: x86: Introducing kvm_x86_ops.apicv_post_state_restore svm: Add VMEXIT handlers for AVIC svm: Add interrupt injection via AVIC KVM: x86: Detect and Initialize AVIC support svm: Introduce new AVIC VMCB registers KVM: split kvm_vcpu_wake_up from kvm_vcpu_kick KVM: x86: Introducing kvm_x86_ops VCPU blocking/unblocking hooks KVM: x86: Introducing kvm_x86_ops VM init/destroy hooks KVM: x86: Rename kvm_apic_get_reg to kvm_lapic_get_reg KVM: x86: Misc LAPIC changes to expose helper functions KVM: shrink halt polling even more for invalid wakeups KVM: s390: set halt polling to 80 microseconds KVM: halt_polling: provide a way to qualify wakeups during poll KVM: PPC: Book3S HV: Re-enable XICS fast path for irqfd-generated interrupts kvm: Conditionally register IRQ bypass consumer ...
2016-05-18KVM: x86: make hwapic_isr_update and hwapic_irr_update look the samePaolo Bonzini
Neither APICv nor AVIC actually need the first argument of hwapic_isr_update, but the vCPU makes more sense than passing the pointer to the whole virtual machine! In fact in the APICv case it's just happening that the vCPU is used implicitly, through the loaded VMCS. The second argument instead is named differently, make it consistent. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-18svm: Manage vcpu load/unload when enable AVICSuravee Suthikulpanit
When a vcpu is loaded/unloaded to a physical core, we need to update host physical APIC ID information in the Physical APIC-ID table accordingly. Also, when vCPU is blocking/un-blocking (due to halt instruction), we need to make sure that the is-running bit in set accordingly in the physical APIC-ID table. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> [Return void from new functions, add WARN_ON when they returned negative errno; split load and put into separate function as they have almost nothing in common. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>