summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2012-09-12ARM: perf: add PMUv2 common event definitionsWill Deacon
2012-09-12ARM: proc: convert v7 proc infos into a common macroPawel Moll
2012-09-12ARM: perf: add support for the Cortex-A5 PMUWill Deacon
2012-03-08ENGR00176160 [MX6]Correct PLL1 freq change flowAnson Huang
2012-03-07ENGR00176147-2: usb: pass the wakeup event to pdataPeter Chen
2012-03-07ENGR00176068-3 defconfig: enable localtimer in defconfigXinyu Chen
2012-03-07ENGR00176068-2 smp_twd: reconfigure clockevents after cpufreq changeXinyu Chen
2012-03-07ENGR00176068-1 mx6q: add smp_twd clock for localtimerXinyu Chen
2012-03-07ENGR00176279 [MX6DL] MMC: improve SD3.0 SDR104 mode compatability.Ryan QIAN
2012-03-07ENGR00174062 CCM: change clock enable_count to usecountLin Fuzhen
2012-03-06ENGR00176136- MX6: Added support for 1.2GHz ARM FrequencyRanjani Vaidyanathan
2012-03-06ENGR00176175 MX6Q: fix typo in cpu op voltage setting.Zhang Jiejing
2012-03-06ENGR00170526-1 MX6Q_Sabreauto: remove audio platform data rst_gpio.Lionel Xu
2012-03-02ENGR00175551:Update sabreauto board file for handling spi and paralle norFrancisco Munoz
2012-03-02ENGR00175947 camera: sensor mclk change name to clko_clkYuxi Sun
2012-03-02ENGR00175219-6 MX6Q_SABRESD: add clko_clk supportGary Zhang
2012-03-02ENGR00175219-5 MX6: remove cko1_clk in clock.cGary Zhang
2012-03-01ENGR00175826 defconfig: add mx6q_sabresd in updater defconfig.Zhang Jiejing
2012-03-01ENGR00175824 fix the wrong patch for arch/arm/include/asm/futex.hHuang Shijie
2012-02-29ENGR00175692-02 [MX6DL] SD3.0: can not recognize SD3.0 cards on some boards.Ryan QIAN
2012-02-28ENGR00175219-2 MX6Q_SABRESD: add wm8958 supportGary Zhang
2012-02-28ENGR00175219-1 MX6: add wm8958 option in defconfigGary Zhang
2012-02-23ENGR00175222-1 IPUv3 pdev:Check fb size before reserve ov fbLiu Ying
2012-02-23ENGR00174905 [MX6] gc355 can't work after specific suspend/resume caseLarry Li
2012-02-22ENGR00174886-1 - EPDC fb: Don't register EPDC unless "epdc" kernel option setDanny Nold
2012-02-22ENGR00174569: MX6 - Disable WAIT mode by defaultRanjani Vaidyanathan
2012-02-22ENGR00174734-1 usb: need to discharge both dp and dmPeter Chen
2012-02-22ENGR00174615:Enable AH-1613 GPS moduleB38613
2012-02-21ENGR00171079-10: mx6q-arm2 cs42888 board sample rate settingsAdrian Alonso
2012-02-21ENGR00171079-9: mx53-ard cs42888 board sample rate settingsAdrian Alonso
2012-02-21ENGR00171079-8 imx6q sabreauto cs42888 audio supportAdrian Alonso
2012-02-21ENGR00171079-7 mx6q clock anaclk input source clockAdrian Alonso
2012-02-21ENGR00171079-5 imx6q-sabreauto set supportted sample ratesAdrian Alonso
2012-02-21ENGR00171079-2 mx6 add anaclk_2 io buffers enable macrosAdrian Alonso
2012-02-21ENGR00171079-1 mx6q-ard: esai remove record early paramAdrian Alonso
2012-02-21ENGR00175049 - Remove section mismatch warning for Max17135Danny Nold
2012-02-21ENGR00174897 i.mx6: clock: fix axi clock mux settingJason Liu
2012-02-21ENGR00174896 i.mx6: i.mx6l: clock: gpu/vpu clock adjustmentJason Liu
2012-02-20ENGR00174829-1 MX6Q_SABRESD: fix warnning messageZhang Jiejing
2012-02-20ENGR00174824 [MX6]Add workaround for i.MX6DL suspend/resumeAnson Huang
2012-02-17ENGR00174630 [MX6]Disable GPT serial clockAnson Huang
2012-02-16ENGR00174652 i.mx6: explicitly set the LPM mode to run mode during early bootupJason Liu
2012-02-16ENGR00174394 MX6Q_arm2/MX6Q_sabreauto: change ipu_id/disp_id for LDB config.Wayne Zou
2012-02-16ENGR00174649 i.mx6dl: clock: set ipu1 clock to 270M, change ldb_di_clk parentWayne Zou
2012-02-16ENGR00174540: i.mx6: anatop_regulator: LDO voltage print not correctlyJason Liu
2012-02-16ENGR00174532 [mx6Q]Change 2D clock to 480MLarry Li
2012-02-15ENGR00174106-1 - EPDC fb: Support EPDC on MX 6DL/SDanny Nold
2012-02-15ENGR00172274-02 - [MX6]: rework IEEE-1588 in MX6Q Sabre-lite/sd board.Fugang Duan
2012-02-15ENGR00174425: i.mx6: i.mx6dl: clock: set gpu2d_axi clock parent to mmdc0Jason Liu
2012-02-15ENGR00174423-2: i.mx6: clock: code clean up in pfd_set_rateJason Liu