summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2015-04-10Merge tag 'nios2-fixes-v4.0-final' of ↵Linus Torvalds
git://git.rocketboards.org/linux-socfpga-next Pull arch/nios2 fixes from Ley Foon Tan: "There are 3 arch/nios2 fixes for 4.0 final: - fix cache coherency issue when debugging with gdb - move restart_block to struct task_struct (aligned with other architectures) - fix for missing registers defines for ptrace" * tag 'nios2-fixes-v4.0-final' of git://git.rocketboards.org/linux-socfpga-next: nios2: fix cache coherency issue when debug with gdb nios2: add missing ptrace registers defines nios2: signal: Move restart_block to struct task_struct
2015-04-10nios2: fix cache coherency issue when debug with gdbLey Foon Tan
Remove the end address checking for flushda function. We need to flush each address line for flushda instruction, from start to end address. This is because flushda instruction only flush the cache if tag and line fields are matched. Change to use ldwio instruction (bypass cache) to load the instruction that causing trap. Our interest is the actual instruction that executed by the processor, this should be uncached. Note, EA address might be an userspace cached address. Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-04-09Merge tag 'pci-v4.0-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Here are some fixes for v4.0. I apologize for how late they are. We were hoping for some better fixes, but couldn't get them polished in time. These fix: - a Xen domU oops with PCI passthrough devices - a sparc T5 boot failure - a STM SPEAr13xx crash (use after initdata freed) - a cpcihp hotplug driver thinko - an AER thinko that printed stack junk Details: Enumeration - Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas) Resource management - Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas) AER - Avoid info leak in __print_tlp_header() (Rasmus Villemoes) PCI device hotplug - Add missing curly braces in cpci_configure_slot() (Dan Carpenter) ST Microelectronics SPEAr13xx host bridge driver - Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov) * tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" PCI: Don't look for ACPI hotplug parameters if ACPI is disabled PCI: cpcihp: Add missing curly braces in cpci_configure_slot() PCI/AER: Avoid info leak in __print_tlp_header() PCI: spear: Drop __initdata from spear13xx_pcie_driver
2015-04-09nios2: add missing ptrace registers definesLey Foon Tan
These are all register available in nios2. Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-04-08x86: clean up/fix 'copy_in_user()' tail zeroingLinus Torvalds
The rule for 'copy_from_user()' is that it zeroes the remaining kernel buffer even when the copy fails halfway, just to make sure that we don't leave uninitialized kernel memory around. Because even if we check for errors, some kernel buffers stay around after thge copy (think page cache). However, the x86-64 logic for user copies uses a copy_user_generic() function for all the cases, that set the "zerorest" flag for any fault on the source buffer. Which meant that it didn't just try to clear the kernel buffer after a failure in copy_from_user(), it also tried to clear the destination user buffer for the "copy_in_user()" case. Not only is that pointless, it also means that the clearing code has to worry about the tail clearing taking page faults for the user buffer case. Which is just stupid, since that case shouldn't happen in the first place. Get rid of the whole "zerorest" thing entirely, and instead just check if the destination is in kernel space or not. And then just use memset() to clear the tail of the kernel buffer if necessary. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-08Revert "sparc/PCI: Clip bridge windows to fit in upstream windows"Bjorn Helgaas
This reverts commit d63e2e1f3df904bf6bd150bdafb42ddbb3257ea8. David Ahern reported that d63e2e1f3df9 breaks booting on an 8-socket T5 sparc system. He also verified that the system boots with d63e2e1f3df9 reverted. Yinghai has some fixes, but they need a little more polishing than we can do before v4.0. Link: http://lkml.kernel.org/r/5514391F.2030300@oracle.com # report Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org # patches Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.19+
2015-04-08nios2: signal: Move restart_block to struct task_structLey Foon Tan
See https://lkml.org/lkml/2014/10/29/643 and commit f56141e3e2d9 ("all arches, signal: move restart_block to struct task_struct") Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-04-03Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: a SYSRET single-stepping fix, a dmi-scan robustization fix, a reboot quirk and a kgdb fixlet" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kgdb/x86: Fix reporting of 'si' in kgdb on x86_64 x86/asm/entry/64: Disable opportunistic SYSRET if regs->flags has TF set x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk MAINTAINERS: Change the x86 microcode loader maintainer firmware: dmi_scan: Prevent dmi_num integer overflow
2015-04-03Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two x86 Intel PMU constraint handling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix Haswell CYCLE_ACTIVITY.* counter constraints perf/x86/intel: Filter branches for PEBS event
2015-04-02Merge tag 'stable/for-linus-4.0-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen regression fixes from David Vrabel: "Fix two regressions in the balloon driver's use of memory hotplug when used in a PV guest" * tag 'stable/for-linus-4.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: before adding hotplugged memory, set frames to invalid x86/xen: prepare p2m list for memory hotplug
2015-04-02perf/x86/intel: Fix Haswell CYCLE_ACTIVITY.* counter constraintsAndi Kleen
Some of the CYCLE_ACTIVITY.* events can only be scheduled on counter 2. Due to a typo Haswell matched those with INTEL_EVENT_CONSTRAINT, which lead to the events never matching as the comparison does not expect anything in the umask too. Fix the typo. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1425925222-32361-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02perf/x86/intel: Filter branches for PEBS eventKan Liang
For supporting Intel LBR branches filtering, Intel LBR sharing logic mechanism is introduced from commit b36817e88630 ("perf/x86: Add Intel LBR sharing logic"). It modifies __intel_shared_reg_get_constraints() to config lbr_sel, which is finally used to set LBR_SELECT. However, the intel_shared_regs_constraints() function is called after intel_pebs_constraints(). The PEBS event will return immediately after intel_pebs_constraints(). So it's impossible to filter branches for PEBS events. This patch moves intel_shared_regs_constraints() ahead of intel_pebs_constraints(). We can safely do that because the intel_shared_regs_constraints() function only returns empty constraint if its rejecting the event, otherwise it returns NULL such that we continue calling intel_pebs_constraints() and x86_get_event_constraint(). Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: eranian@google.com Link: http://lkml.kernel.org/r/1427467105-9260-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02kgdb/x86: Fix reporting of 'si' in kgdb on x86_64Steffen Liebergeld
This patch fixes an error in kgdb for x86_64 which would report the value of dx when asked to give the value of si. Signed-off-by: Steffen Liebergeld <steffen.liebergeld@kernkonzept.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02x86/asm/entry/64: Disable opportunistic SYSRET if regs->flags has TF setAndy Lutomirski
When I wrote the opportunistic SYSRET code, I missed an important difference between SYSRET and IRET. Both instructions are capable of setting EFLAGS.TF, but they behave differently when doing so: - IRET will not issue a #DB trap after execution when it sets TF. This is critical -- otherwise you'd never be able to make forward progress when returning to userspace. - SYSRET, on the other hand, will trap with #DB immediately after returning to CPL3, and the next instruction will never execute. This breaks anything that opportunistically SYSRETs to a user context with TF set. For example, running this code with TF set and a SIGTRAP handler loaded never gets past 'post_nop': extern unsigned char post_nop[]; asm volatile ("pushfq\n\t" "popq %%r11\n\t" "nop\n\t" "post_nop:" : : "c" (post_nop) : "r11"); In my defense, I can't find this documented in the AMD or Intel manual. Fix it by using IRET to restore TF. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 2a23c6b8a9c4 ("x86_64, entry: Use sysret to return to userspace when possible") Link: http://lkml.kernel.org/r/9472f1ca4c19a38ecda45bba9c91b7168135fcfa.1427923514.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirkStefan Lippers-Hollmann
The ASRock Q1900DC-ITX mainboard (Baytrail-D) hangs randomly in both BIOS and UEFI mode while rebooting unless reboot=pci is used. Add a quirk to reboot via the pci method. The problem is very intermittent and hard to debug, it might succeed rebooting just fine 40 times in a row - but fails half a dozen times the next day. It seems to be slightly less common in BIOS CSM mode than native UEFI (with the CSM disabled), but it does happen in either mode. Since I've started testing this patch in late january, rebooting has been 100% reliable. Most of the time it already hangs during POST, but occasionally it might even make it through the bootloader and the kernel might even start booting, but then hangs before the mode switch. The same symptoms occur with grub-efi, gummiboot and grub-pc, just as well as (at least) kernel 3.16-3.19 and 4.0-rc6 (I haven't tried older kernels than 3.16). Upgrading to the most current mainboard firmware of the ASRock Q1900DC-ITX, version 1.20, does not improve the situation. ( Searching the web seems to suggest that other Bay Trail-D mainboards might be affected as well. ) -- Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: <stable@vger.kernel.org> Cc: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/20150330224427.0fb58e42@mir Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01powerpc: fix memory corruption by pnv_alloc_idle_core_statesJan Stancek
Space allocated for paca is based off nr_cpu_ids, but pnv_alloc_idle_core_states() iterates paca with cpu_nr_cores()*threads_per_core, which is using NR_CPUS. This causes pnv_alloc_idle_core_states() to write over memory, which is outside of paca array and may later lead to various panics. Fixes: 7cba160ad789 (powernv/cpuidle: Redesign idle states management) Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-29Merge tag 'armsoc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "The latest and greatest fixes for ARM platform code. Worth pointing out are: - Lines-wise, largest is a PXA fix for dealing with interrupts on DT that was quite broken. It's still newish code so while we could have held this off, it seemed appropriate to include now - Some GPIO fixes for OMAP platforms added a few lines. This was also fixes for code recently added (this release). - Small OMAP timer fix to behave better with partially upstreamed platforms, which is quite welcome. - Allwinner fixes about operating point control, reducing overclocking in some cases for better stability. plus a handful of other smaller fixes across the map" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: juno: Fix misleading name of UART reference clock ARM: dts: sunxi: Remove overclocked/overvoltaged OPP ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting ARM: socfpga: dts: fix spi1 interrupt ARM: dts: Fix gpio interrupts for dm816x ARM: dts: dra7: remove ti,hwmod property from pcie phy ARM: OMAP: dmtimer: disable pm runtime on remove ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure ARM: OMAP2+: Fix socbus family info for AM33xx devices ARM: dts: omap3: Add missing dmas for crypto ARM: dts: rockchip: disable gmac by default in rk3288.dtsi MAINTAINERS: add rockchip regexp to the ARM/Rockchip entry ARM: pxa: fix pxa interrupts handling in DT ARM: pxa: Fix typo in zeus.c ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage
2015-03-29Merge tag 'sunxi-fixes-for-4.0' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Allwinner fixes for 4.0 There's a few fixes to merge for 4.0, one to add a select in the machine Kconfig option to fix a potential build failure, and two fixing cpufreq related issues. * tag 'sunxi-fixes-for-4.0' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sunxi: Remove overclocked/overvoltaged OPP ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-29Merge tag 'fixes-v4.0-rc4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for the -rc cycle: - Fix a device tree based booting vs legacy booting regression for omap3 crypto hardware by adding the missing DMA channels. - Fix /sys/bus/soc/devices/soc0/family for am33xx devices. - Fix two timer issues that can cause hangs if the timer related hwmod data is missing like it often initially is for new SoCs. - Remove pcie hwmods entry from dts as that causes runtime PM to fail for the PHYs. - A paper bag type dts configuration fix for dm816x GPIO interrupts that I just noticed. This is most of the changes diffstat wise, but as it's a basic feature for connecting devices and things work otherwise, it should be fixed. * tag 'fixes-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix gpio interrupts for dm816x ARM: dts: dra7: remove ti,hwmod property from pcie phy ARM: OMAP: dmtimer: disable pm runtime on remove ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure ARM: OMAP2+: Fix socbus family info for AM33xx devices ARM: dts: omap3: Add missing dmas for crypto Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-29Merge tag 'socfpga_fix_for_v4.0_2' of ↵Olof Johansson
git://git.rocketboards.org/linux-socfpga-next into fixes Late fix for v4.0 on the SoCFPGA platform: - Fix interrupt number for SPI1 interface * tag 'socfpga_fix_for_v4.0_2' of git://git.rocketboards.org/linux-socfpga-next: ARM: socfpga: dts: fix spi1 interrupt Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-29arm64: juno: Fix misleading name of UART reference clockDave Martin
The UART reference clock speed is 7273.8 kHz, not 72738 kHz. Dots aren't usually used in node names even though ePAPR permits them. However, this can easily be avoided by expressing the frequency in Hz, not kHz. This patch changes the name to refclk7273800hz, reflecting the actual clock speed. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-29Merge tag 'fixes-for-v4.0-rc5' of https://github.com/rjarzmik/linux into fixesOlof Johansson
arm: pxa: fixes for v4.0-rc5 There are only 2 fixes, one for the zeus board about the regulator changes, where a typo prevented the zeus board from having a working can regulator, and one regression triggered by the interrupts IRQ shift of 16 affecting all boards. * tag 'fixes-for-v4.0-rc5' of https://github.com/rjarzmik/linux: ARM: pxa: fix pxa interrupts handling in DT ARM: pxa: Fix typo in zeus.c Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-28Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "Fix x86 syscall exit code bug that resulted in spurious non-execution of TIF-driven user-return worklets, causing big trouble for things like KVM that rely on user notifiers for correctness of their vcpu model, causing crashes like double faults" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm/entry: Check for syscall exit work with IRQs disabled
2015-03-28Merge branch 'parisc-4.0-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parsic fixes from Helge Deller: "One patch from Mikulas fixes a bug on parisc by artifically incrementing the counter in pmd_free when the kernel tries to free the preallocated pmd. Other than that we now prevent that syscalls gets added without incrementing __NR_Linux_syscalls and fix the initial pmd setup code if a default page size greater than 4k has been selected" * 'parisc-4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix pmd code to depend on PT_NLEVELS value, not on CONFIG_64BIT parisc: mm: don't count preallocated pmds parisc: Add compile-time check when adding new syscalls
2015-03-28Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm ppc bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Fix instruction emulation KVM: PPC: Book3S HV: Endian fix for accessing VPA yield count KVM: PPC: Book3S HV: Fix spinlock/mutex ordering issue in kvmppc_set_lpcr()
2015-03-28Merge tag 'arc-4.0-fixes-part-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "We found some issues with signal handling taking down the system. I know its late, but these are important and all marked for stable. ARC signal handling related fixes uncovered during recent testing of NPTL tools" * tag 'arc-4.0-fixes-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: signal handling robustify ARC: SA_SIGINFO ucontext regs off-by-one
2015-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of bug fixes for s390. The ftrace comile fix is quite large for a -rc6 release, but it would be nice to have it in 4.0" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/smp: reenable smt after resume s390/mm: limit STACK_RND_MASK for compat tasks s390/ftrace: fix compile error if CONFIG_KPROBES is disabled s390/cpum_sf: add diagnostic sampling event only if it is authorized
2015-03-26ARC: signal handling robustifyVineet Gupta
A malicious signal handler / restorer can DOS the system by fudging the user regs saved on stack, causing weird things such as sigreturn returning to user mode PC but cpu state still being kernel mode.... Ensure that in sigreturn path status32 always has U bit; any other bogosity (gargbage PC etc) will be taken care of by normal user mode exceptions mechanisms. Reproducer signal handler: void handle_sig(int signo, siginfo_t *info, void *context) { ucontext_t *uc = context; struct user_regs_struct *regs = &(uc->uc_mcontext.regs); regs->scratch.status32 = 0; } Before the fix, kernel would go off to weeds like below: --------->8----------- [ARCLinux]$ ./signal-test Path: /signal-test CPU: 0 PID: 61 Comm: signal-test Not tainted 4.0.0-rc5+ #65 task: 8f177880 ti: 5ffe6000 task.ti: 8f15c000 [ECR ]: 0x00220200 => Invalid Write @ 0x00000010 by insn @ 0x00010698 [EFA ]: 0x00000010 [BLINK ]: 0x2007c1ee [ERET ]: 0x10698 [STAT32]: 0x00000000 : <-------- BTA: 0x00010680 SP: 0x5ffe7e48 FP: 0x00000000 LPS: 0x20003c6c LPE: 0x20003c70 LPC: 0x00000000 ... --------->8----------- Reported-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-03-26ARC: SA_SIGINFO ucontext regs off-by-oneVineet Gupta
The regfile provided to SA_SIGINFO signal handler as ucontext was off by one due to pt_regs gutter cleanups in 2013. Before handling signal, user pt_regs are copied onto user_regs_struct and copied back later. Both structs are binary compatible. This was all fine until commit 2fa919045b72 (ARC: pt_regs update #2) which removed the empty stack slot at top of pt_regs (corresponding to first pad) and made the corresponding fixup in struct user_regs_struct (the pad in there was moved out of @scratch - not removed altogether as it is part of ptrace ABI) struct user_regs_struct { + long pad; struct { - long pad; long bta, lp_start, lp_end,.... } scratch; ... } This meant that now user_regs_struct was off by 1 reg w.r.t pt_regs and signal code needs to user_regs_struct.scratch to reflect it as pt_regs, which is what this commit does. This problem was hidden for 2 years, because both save/restore, despite using wrong location, were using the same location. Only an interim inspection (reproducer below) exposed the issue. void handle_segv(int signo, siginfo_t *info, void *context) { ucontext_t *uc = context; struct user_regs_struct *regs = &(uc->uc_mcontext.regs); printf("regs %x %x\n", <=== prints 7 8 (vs. 8 9) regs->scratch.r8, regs->scratch.r9); } int main() { struct sigaction sa; sa.sa_sigaction = handle_segv; sa.sa_flags = SA_SIGINFO; sigemptyset(&sa.sa_mask); sigaction(SIGSEGV, &sa, NULL); asm volatile( "mov r7, 7 \n" "mov r8, 8 \n" "mov r9, 9 \n" "mov r10, 10 \n" :::"r7","r8","r9","r10"); *((unsigned int*)0x10) = 0; } Fixes: 2fa919045b72ec892e "ARC: pt_regs update #2: Remove unused gutter at start of pt_regs" CC: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-03-25Merge tag 'metag-fixes-v4.0-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull arch/metag fix from James Hogan: "Another metag architecture fix for v4.0 This is another single fix, for an include dependency problem when using ioremap_wc() from asm/io.h without also including asm/pgtable.h" * tag 'metag-fixes-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: metag: Fix ioremap_wc/ioremap_cached build errors
2015-03-25Merge tag 'signed-for-4.0' of git://github.com/agraf/linux-2.6Marcelo Tosatti
Patch queue for 4.0 - 2015-03-25 A few bug fixes for Book3S HV KVM: - Fix spinlock ordering - Fix idle guests on LE hosts - Fix instruction emulation
2015-03-25s390/smp: reenable smt after resumeHeiko Carstens
After a suspend/resume cycle we missed to enable smt again, which leads to all sorts of bugs, since the kernel assumes smt is enabled, while the hardware thinks it is not. Reported-and-tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reported-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-03-24Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull two arm64 fixes from Catalin Marinas: - switch_mm() fix where init_mm.pgd ends up in the user TTBR0; swapper_pg_dir is not suitable for user mappings - this_cpu accessors fix for preemption safety * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: percpu: Make this_cpu accessors pre-empt safe arm64: Use the reserved TTBR0 if context switching to the init_mm
2015-03-24Merge tag 'powerpc-4.0-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fixes from Michael Ellerman: - Fix the MCE code to use CONFIG_KVM_BOOK3S_64_HANDLER - Little endian fixes for post mobility device tree update - Add PVR for POWER8NVL processor - Fixes for hypervisor doorbell handling * tag 'powerpc-4.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/book3s: Fix the MCE code to use CONFIG_KVM_BOOK3S_64_HANDLER powerpc/pseries: Little endian fixes for post mobility device tree update powerpc: Add PVR for POWER8NVL processor powerpc/powernv: Fixes for hypervisor doorbell handling
2015-03-24Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Marcelo Tosatti: "Fix for higher-order page allocation failures, fix Xen-on-KVM with x2apic, L1 crash with unrestricted guest mode (nested VMX)" * git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: avoid page allocation failure in kvm_set_memory_region() KVM: x86: call irq notifiers with directed EOI KVM: nVMX: mask unrestricted_guest if disabled on L0
2015-03-24ARM: dts: sunxi: Remove overclocked/overvoltaged OPPChen-Yu Tsai
Without proper regulator support for individual boards, it is dangerous to have overclocked/overvoltaged OPPs in the list. Cpufreq will increase the frequency without the accompanying voltage increase, resulting in an unstable system. Remove them for now. We can revisit them with the new version of OPP bindings, which support boost settings and frequency ranges, among other things. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-03-24ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP settingChen-Yu Tsai
The Olimex A10-Lime is known to be unstable when running at 1008MHz. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-03-24x86/asm/entry: Check for syscall exit work with IRQs disabledAndy Lutomirski
We currently have a race: if we're preempted during syscall exit, we can fail to process syscall return work that is queued up while we're preempted in ret_from_sys_call after checking ti.flags. Fix it by disabling interrupts before checking ti.flags. Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com> Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tejun Heo <tj@kernel.org> Fixes: 96b6352c1271 ("x86_64, entry: Remove the syscall exit audit") Link: http://lkml.kernel.org/r/189320d42b4d671df78c10555976bb10af1ffc75.1427137498.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24arm64: percpu: Make this_cpu accessors pre-empt safeSteve Capper
this_cpu operations were implemented for arm64 in: 5284e1b arm64: xchg: Implement cmpxchg_double f97fc81 arm64: percpu: Implement this_cpu operations Unfortunately, it is possible for pre-emption to take place between address generation and data access. This can lead to cases where data is being manipulated by this_cpu for a different CPU than it was called on. Which effectively breaks the spec. This patch disables pre-emption for the this_cpu operations guaranteeing that address generation and data manipulation take place without a pre-emption in-between. Fixes: 5284e1b4bc8a ("arm64: xchg: Implement cmpxchg_double") Fixes: f97fc810798c ("arm64: percpu: Implement this_cpu operations") Reported-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Steve Capper <steve.capper@linaro.org> [catalin.marinas@arm.com: remove space after type cast] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-03-23KVM: x86: call irq notifiers with directed EOIRadim Krčmář
kvm_ioapic_update_eoi() wasn't called if directed EOI was enabled. We need to do that for irq notifiers. (Like with edge interrupts.) Fix it by skipping EOI broadcast only. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=82211 Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Bandan Das <bsd@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-23arm64: Use the reserved TTBR0 if context switching to the init_mmCatalin Marinas
The idle_task_exit() function may call switch_mm() with next == &init_mm. On arm64, init_mm.pgd cannot be used for user mappings, so this patch simply sets the reserved TTBR0. Cc: <stable@vger.kernel.org> Reported-by: Jon Medhurst (Tixy) <tixy@linaro.org> Tested-by: Jon Medhurst (Tixy) <tixy@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "Some perf bug fixes from David Ahern, and the fix for that nasty memmove() bug" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix several bugs in memmove(). sparc: Touch NMI watchdog when walking cpus and calling printk sparc: perf: Add support M7 processor sparc: perf: Make counting mode actually work sparc: perf: Remove redundant perf_pmu_{en|dis}able calls
2015-03-23sparc64: Fix several bugs in memmove().David S. Miller
Firstly, handle zero length calls properly. Believe it or not there are a few of these happening during early boot. Next, we can't just drop to a memcpy() call in the forward copy case where dst <= src. The reason is that the cache initializing stores used in the Niagara memcpy() implementations can end up clearing out cache lines before we've sourced their original contents completely. For example, considering NG4memcpy, the main unrolled loop begins like this: load src + 0x00 load src + 0x08 load src + 0x10 load src + 0x18 load src + 0x20 store dst + 0x00 Assume dst is 64 byte aligned and let's say that dst is src - 8 for this memcpy() call. That store at the end there is the one to the first line in the cache line, thus clearing the whole line, which thus clobbers "src + 0x28" before it even gets loaded. To avoid this, just fall through to a simple copy only mildly optimized for the case where src and dst are 8 byte aligned and the length is a multiple of 8 as well. We could get fancy and call GENmemcpy() but this is good enough for how this thing is actually used. Reported-by: David Ahern <david.ahern@oracle.com> Reported-by: Bob Picco <bpicco@meloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23x86/xen: prepare p2m list for memory hotplugJuergen Gross
Commit 054954eb051f35e74b75a566a96fe756015352c8 ("xen: switch to linear virtual mapped sparse p2m list") introduced a regression regarding to memory hotplug for a pv-domain: as the virtual space for the p2m list is allocated for the to be expected memory size of the domain only, hotplugged memory above that size will not be usable by the domain. Correct this by using a configurable size for the p2m list in case of memory hotplug enabled (default supported memory size is 512 GB for 64 bit domains and 4 GB for 32 bit domains). Signed-off-by: Juergen Gross <jgross@suse.com> Cc: <stable@vger.kernel.org> # 3.19+ Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-03-23metag: Fix ioremap_wc/ioremap_cached build errorsJames Hogan
When ioremap_wc() or ioremap_cached() are used without first including asm/pgtable.h, the _PAGE_CACHEABLE or _PAGE_WR_COMBINE definitions aren't found, resulting in build errors like the following (in next-20150323 due to "lib: devres: add a helper function for ioremap_wc"): lib/devres.c: In function ‘devm_ioremap_wc’: lib/devres.c:91: error: ‘_PAGE_WR_COMBINE’ undeclared We can't easily include asm/pgtable.h in asm/io.h due to dependency problems, so split out the _PAGE_* definitions from asm/pgtable.h into a separate asm/pgtable-bits.h header (as a couple of other architectures already do), and include that in io.h instead. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: Abhilash Kesavan <a.kesavan@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-23parisc: Fix pmd code to depend on PT_NLEVELS value, not on CONFIG_64BITHelge Deller
Make the code which sets up the pmd depend on PT_NLEVELS == 3, not on CONFIG_64BIT. The reason is, that a 64bit kernel with a page size greater than 4k doesn't need the pmd and thus has PT_NLEVELS = 2. Signed-off-by: Helge Deller <deller@gmx.de>
2015-03-23parisc: mm: don't count preallocated pmdsMikulas Patocka
The patch dc6c9a35b66b520cf67e05d8ca60ebecad3b0479 that counts pmds allocated for a process introduced a bug on 64-bit PA-RISC kernels. The PA-RISC architecture preallocates one pmd with each pgd. This preallocated pmd can never be freed - pmd_free does nothing when it is called with this pmd. When the kernel attempts to free this preallocated pmd, it decreases the count of allocated pmds. The result is that the counter underflows and this error is reported. This patch fixes the bug by artifically incrementing the counter in pmd_free when the kernel tries to free the preallocated pmd. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Helge Deller <deller@gmx.de>
2015-03-23parisc: Add compile-time check when adding new syscallsHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2015-03-23powerpc/book3s: Fix the MCE code to use CONFIG_KVM_BOOK3S_64_HANDLERMahesh Salgaonkar
commit id 2ba9f0d has changed CONFIG_KVM_BOOK3S_64_HV to tristate to allow HV/PR bits to be built as modules. But the MCE code still depends on CONFIG_KVM_BOOK3S_64_HV which is wrong. When user selects CONFIG_KVM_BOOK3S_64_HV=m to build HV/PR bits as a separate module the relevant MCE code gets excluded. This patch fixes the MCE code to use CONFIG_KVM_BOOK3S_64_HANDLER. This makes sure that the relevant MCE code is included when HV/PR bits are built as a separate modules. Fixes: 2ba9f0d88750 ("kvm: powerpc: book3s: Support building HV and PR KVM as module") Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-21Merge tag 'pm+acpi-4.0-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are fixes for recent regressions (PCI/ACPI resources and at91 RTC locking), a stable-candidate powercap RAPL driver fix and two ARM cpuidle fixes (one stable-candidate too). Specifics: - Revert a recent PCI commit related to IRQ resources management that introduced a regression for drivers attempting to bind to devices whose previous drivers did not balance pci_enable_device() and pci_disable_device() as expected (Rafael J Wysocki). - Fix a deadlock in at91_rtc_interrupt() introduced by a typo in a recent commit related to wakeup interrupt handling (Dan Carpenter). - Allow the power capping RAPL (Running-Average Power Limit) driver to use different energy units for domains within one CPU package which is necessary to handle Intel Haswell EP processors correctly (Jacob Pan). - Improve the cpuidle mvebu driver's handling of Armada XP SoCs by updating the target residency and exit latency numbers for those chips (Sebastien Rannou). - Prevent the cpuidle mvebu driver from calling cpu_pm_enter() twice in a row before cpu_pm_exit() is called on the same CPU which breaks the core's assumptions regarding the usage of those functions (Gregory Clement)" * tag 'pm+acpi-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "x86/PCI: Refine the way to release PCI IRQ resources" rtc: at91rm9200: double locking bug in at91_rtc_interrupt() powercap / RAPL: handle domains with different energy units cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs cpuidle: mvebu: Fix the CPU PM notifier usage