summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2013-11-07Fixed drive strength field for clko. Added drive strength field setting for c...Andrei Andreyanau
2013-11-07Fixed support for mt9v022 (VM-007/VM-010) camera.Andrei Andreyanau
2013-11-07Fixed support for clko2_clk output pinAndrei Andreyanau
2013-11-07Added support for clocking the camera, connected to csi2 interface. Fixed clk...Andrei Andreyanau
2013-11-07Fix TODO records.Grigory Milev
2013-11-07Modify da9063 i2c driver. Added capability wakeup from da9063 irq (in particu...Anatoly Palto
2013-11-07Added new divider for 54MHz MCLK for mt9p031 camera. Also, recalculated divid...Andrei Andreyanau
2013-11-07Implemented support for m24c04 eeprom on video capture board (VM-008).Dmitry Lavnikevich
2013-11-07Implemented video capture board led control.Dmitry Lavnikevich
2013-11-07Added support for switching on/off internal pll for MT9P031 camera. Also adde...Andrei Andreyanau
2013-11-07Added base implementation of tw9910.Dmitry Lavnikevich
2013-11-07phyFLEX-i.MX6: Set pice reset gpioChristian Hemp
2013-11-07phyFLEX-imx6: Set SD3 WP to correct gpioChristian Hemp
2013-11-07phyflex-i.MX6: Mux GPIO 0 for usb1 enableChristian Hemp
2013-11-07phyFLEX-i.MX6: Set pice reset gpioChristian Hemp
2013-11-07phyFLEX-i.MX6: Added new GPIOsChristian Hemp
2013-11-07phyFLEX-i.MX6: Remove PEB codeChristian Hemp
2013-11-07phyFLEX-i.MX6: remove spi nor partionsChristian Hemp
2013-11-07phyflex-iMX6: Remove phyflex fixupChristian Hemp
2013-11-07phyflex-imx6: Remove NAND partition defenition from codeChristian Hemp
2013-11-07phyflex: only use second ldb fb if hdmi is not usedDaniel Mierswa
2013-11-07phyflex: introduce pin define for hw introspectionDaniel Mierswa
2013-11-07imx6 power offChristian Hemp
2013-11-07phyflex-imx6: add selection for phyCAM-P and S+Christian Hemp
2013-11-07Add Display ETM0700G0DH6Christian Hemp
2013-11-07phyflex-imx6: Added etd touch driver to platfomChristian Hemp
2013-11-07phyFLEX-i.MX6: remove CONFIG_PHYFLEX_SOC_1362_0Christian Hemp
2013-11-07Fixed clock rate for cameras to be close to 26MHzAndrei Andreyanau
2013-11-07Fixed parent clock source for cameras.Andrei Andreyanau
2013-11-07Remove rests of debug output in pmic initialization codeDmitry Lavnikevich
2013-11-07Added mt9p031 camera sensor supportRaman Tunik
2013-11-07Added support for powe-down the ksz9021 ethernet adapter modified: arch/arm/m...Andrei Andreyanau
2013-11-07Added default mx6 configAnatoly Palto
2013-11-07Fix for latest freescale patchesUladzimir Bely
2013-11-07Added support working two touch screens simultaneouslyAnatoly Palto
2013-11-07Old board ethernet fixesGrigory Milev
2013-11-07Fix ethernet for old 1362_0 modulesGrigory Milev
2013-11-07For phyFlex Fix conflict init interrupt tochscreen 1 and camera clk0 fo soc 1...Anatoly Palto
2013-11-07Added support for LVDS camera on 1st lvds portDmitry Lavnikevich
2013-11-07Minor cleanup: remove constRaman Tunik
2013-11-07Fixed chip id register read for ethernet device in board specific codeAndrei Andreyanau
2013-11-07Barebox environment size now 4MbGrigory Milev
2013-11-07Added support MAX7301 (SPI to GPIO)Anatoly Palto
2013-11-07Fixed commentary for VM-009/VM-006 camerasAndrei Andreyanau
2013-11-07phyFLEX: Remove unused cameras linksYauhen Kharuzhy
2013-11-07phyFLEX: Fix cameras configurationYauhen Kharuzhy
2013-11-07phyFLEX: Register all known cameras at all CSI busesYauhen Kharuzhy
2013-11-07phyFLEX: Explicitly set #OE signals for camera buffersYauhen Kharuzhy
2013-11-07Revert "PhyFLEX: assign device id for cameras dynamically"Yauhen Kharuzhy
2013-11-07Enabled usb hub power for the latest carrier board revision.Dmitry Lavnikevich
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-11 22:16:24 +0000