summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-10-19Merge tag 'arm-soc-fixes-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A batch of fixes that have come in during the merge window. Some of them are defconfig updates for things that have now landed, some errata additions and a few general scattered fixes. There's also a qcom DT update that adds support for SATA on AP148, and basic support for Sony Xperia Z1 and CM-QS600 platforms that seemed isolated enough that we could merge it even if it's late" * tag 'arm-soc-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: corrected bcm2835 search ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa ARM: dts: Explicitly set dr_mode on exynos Peach boards ARM: dts: qcom: add CM-QS600 board ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone ARM: dts: qcom: Add SATA support on IPQ8064/AP148 MAINTAINERS: Update Santosh Shilimkar's email id ARM: sunxi_defconfig: enable CONFIG_REGULATOR ARM: dts: Disable smc91x on n900 until bootloader dependency is removed ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3 ARM: exynos_defconfig: enable USB gadget support ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] ops ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n ARM: SAMSUNG: Restore Samsung PM Debug functionality ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12 ARM: exynos_defconfig: Enable SBS battery support ARM: exynos_defconfig: Enable Control Groups support ARM: exynos_defconfig: Enable Atmel maXTouch support ARM: exynos_defconfig: Enable MAX77802
2014-10-19Merge git://git.infradead.org/users/eparis/auditLinus Torvalds
Pull audit updates from Eric Paris: "So this change across a whole bunch of arches really solves one basic problem. We want to audit when seccomp is killing a process. seccomp hooks in before the audit syscall entry code. audit_syscall_entry took as an argument the arch of the given syscall. Since the arch is part of what makes a syscall number meaningful it's an important part of the record, but it isn't available when seccomp shoots the syscall... For most arch's we have a better way to get the arch (syscall_get_arch) So the solution was two fold: Implement syscall_get_arch() everywhere there is audit which didn't have it. Use syscall_get_arch() in the seccomp audit code. Having syscall_get_arch() everywhere meant it was a useless flag on the stack and we could get rid of it for the typical syscall entry. The other changes inside the audit system aren't grand, fixed some records that had invalid spaces. Better locking around the task comm field. Removing some dead functions and structs. Make some things static. Really minor stuff" * git://git.infradead.org/users/eparis/audit: (31 commits) audit: rename audit_log_remove_rule to disambiguate for trees audit: cull redundancy in audit_rule_change audit: WARN if audit_rule_change called illegally audit: put rule existence check in canonical order next: openrisc: Fix build audit: get comm using lock to avoid race in string printing audit: remove open_arg() function that is never used audit: correct AUDIT_GET_FEATURE return message type audit: set nlmsg_len for multicast messages. audit: use union for audit_field values since they are mutually exclusive audit: invalid op= values for rules audit: use atomic_t to simplify audit_serial() kernel/audit.c: use ARRAY_SIZE instead of sizeof/sizeof[0] audit: reduce scope of audit_log_fcaps audit: reduce scope of audit_net_id audit: arm64: Remove the audit arch argument to audit_syscall_entry arm64: audit: Add audit hook in syscall_trace_enter/exit() audit: x86: drop arch from __audit_syscall_entry() interface sparc: implement is_32bit_task sparc: properly conditionalize use of TIF_32BIT ...
2014-10-19Merge tag 'qcom-dt-for-3.18-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into fixes Merge "qcom DT changes for v3.18-3" from Kumar Gala: Qualcomm ARM Based Device Tree Updates for v3.18-3 * Added Board support for CM-QS600 and Sony Xperia Z1 phone * Added SATA support on IPQ8064/AP148 * tag 'qcom-dt-for-3.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: ARM: dts: qcom: add CM-QS600 board ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone ARM: dts: qcom: Add SATA support on IPQ8064/AP148
2014-10-19Merge tag 'samsung-fixes-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Pull more fixes from Kukjin Kim: 2nd Samsung fixes for v3.18 - Explicitly set dr_mode on exynos5800-peach-pi, exynos5420-peach-pit and exynos5420-arndale-octa boards, because the USB dwc3 controller will not work properly without dr_mode as host on above boards if the USB host and gadget are enabled in kernel configuration both. * tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa ARM: dts: Explicitly set dr_mode on exynos Peach boards Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-19Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more perf updates from Ingo Molnar: "A second (and last) round of late coming fixes and changes, almost all of them in perf tooling: User visible tooling changes: - Add period data column and make it default in 'perf script' (Jiri Olsa) - Add a visual cue for toggle zeroing of samples in 'perf top' (Taeung Song) - Improve callchains when using libunwind (Namhyung Kim) Tooling fixes and infrastructure changes: - Fix for double free in 'perf stat' when using some specific invalid command line combo (Yasser Shalabi) - Fix off-by-one bugs in map->end handling (Stephane Eranian) - Fix off-by-one bug in maps__find(), also related to map->end handling (Namhyung Kim) - Make struct symbol->end be the first addr after the symbol range, to make it match the convention used for struct map->end. (Arnaldo Carvalho de Melo) - Fix perf_evlist__add_pollfd() error handling in 'perf kvm stat live' (Jiri Olsa) - Fix python test build by moving callchain_param to an object linked into the python binding (Jiri Olsa) - Document sysfs events/ interfaces (Cody P Schafer) - Fix typos in perf/Documentation (Masanari Iida) - Add missing 'struct option' forward declaration (Arnaldo Carvalho de Melo) - Add option to copy events when queuing for sorting across cpu buffers and enable it for 'perf kvm stat live', to avoid having events left in the queue pointing to the ring buffer be rewritten in high volume sessions. (Alexander Yarygin, improving work done by David Ahern): - Do not include a struct hists per perf_evsel, untangling the histogram code from perf_evsel, to pave the way for exporting a minimalistic tools/lib/api/perf/ library usable by tools/perf and initially by the rasd daemon being developed by Borislav Petkov, Robert Richter and Jean Pihet. (Arnaldo Carvalho de Melo) - Make perf_evlist__open(evlist, NULL, NULL), i.e. without cpu and thread maps mean syswide monitoring, reducing the boilerplate for tools that only want system wide mode. (Arnaldo Carvalho de Melo) - Move exit stuff from perf_evsel__delete to perf_evsel__exit, delete should be just a front end for exit + free (Arnaldo Carvalho de Melo) - Add support to new style format of kernel PMU event. (Kan Liang) and other misc fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits) perf script: Add period as a default output column perf script: Add period data column perf evsel: No need to drag util/cgroup.h perf evlist: Add missing 'struct option' forward declaration perf evsel: Move exit stuff from __delete to __exit kprobes/x86: Remove stale ARCH_SUPPORTS_KPROBES_ON_FTRACE define perf kvm stat live: Enable events copying perf session: Add option to copy events when queueing perf Documentation: Fix typos in perf/Documentation perf trace: Use thread_{,_set}_priv helpers perf kvm: Use thread_{,_set}_priv helpers perf callchain: Create an address space per thread perf report: Set callchain_param.record_mode for future use perf evlist: Fix for double free in tools/perf stat perf test: Add test case for pmu event new style format perf tools: Add support to new style format of kernel PMU event perf tools: Parse the pmu event prefix and suffix Revert "perf tools: Default to cpu// for events v5" perf Documentation: Remove Ruplicated docs for powerpc cpu specific events perf Documentation: sysfs events/ interfaces ...
2014-10-18sparc64: Do not define thread fpregs save area as zero-length array.David S. Miller
This breaks the stack end corruption detection facility. What that facility does it write a magic value to "end_of_stack()" and checking to see if it gets overwritten. "end_of_stack()" is "task_thread_info(p) + 1", which for sparc64 is the beginning of the FPU register save area. So once the user uses the FPU, the magic value is overwritten and the debug checks trigger. Fix this by making the size explicit. Due to the size we use for the fpsaved[], gsr[], and xfsr[] arrays we are limited to 7 levels of FPU state saves. So each FPU register set is 256 bytes, allocate 256 * 7 for the fpregs area. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-18sparc64: Fix corrupted thread fault code.David S. Miller
Every path that ends up at do_sparc64_fault() must install a valid FAULT_CODE_* bitmask in the per-thread fault code byte. Two paths leading to the label winfix_trampoline (which expects the FAULT_CODE_* mask in register %g4) were not doing so: 1) For pre-hypervisor TLB protection violation traps, if we took the 'winfix_trampoline' path we wouldn't have %g4 initialized with the FAULT_CODE_* value yet. Resulting in using the TLB_TAG_ACCESS register address value instead. 2) In the TSB miss path, when we notice that we are going to use a hugepage mapping, but we haven't allocated the hugepage TSB yet, we still have to take the window fixup case into consideration and in that particular path we leave %g4 not setup properly. Errors on this sort were largely invisible previously, but after commit 4ccb9272892c33ef1c19a783cfa87103b30c2784 ("sparc64: sun4v TLB error power off events") we now have a fault_code mask bit (FAULT_CODE_BAD_RA) that triggers due to this bug. FAULT_CODE_BAD_RA triggers because this bit is set in TLB_TAG_ACCESS (see #1 above) and thus we get seemingly random bus errors triggered for user processes. Fixes: 4ccb9272892c ("sparc64: sun4v TLB error power off events") Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-18Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "For dmaengine contributions we have: - designware cleanup by Andy - my series moving device_control users to dmanegine_xxx APIs for later removal of device_control API - minor fixes spread over drivers mainly mv_xor, pl330, mmp, imx-sdma etc" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (60 commits) serial: atmel: add missing dmaengine header dmaengine: remove FSLDMA_EXTERNAL_START dmaengine: freescale: remove FSLDMA_EXTERNAL_START control method carma-fpga: move to fsl_dma_external_start() carma-fpga: use dmaengine_xxx() API dmaengine: freescale: add and export fsl_dma_external_start() dmaengine: add dmaengine_prep_dma_sg() helper video: mx3fb: use dmaengine_terminate_all() API serial: sh-sci: use dmaengine_terminate_all() API net: ks8842: use dmaengine_terminate_all() API mtd: sh_flctl: use dmaengine_terminate_all() API mtd: fsmc_nand: use dmaengine_terminate_all() API V4L2: mx3_camer: use dmaengine_pause() API dmaengine: coh901318: use dmaengine_terminate_all() API pata_arasan_cf: use dmaengine_terminate_all() API dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause() dmaengine: dw: export probe()/remove() and Co to users dmaengine: dw: enable and disable controller when needed dmaengine: dw: always export dw_dma_{en,dis}able dmaengine: dw: introduce dw_dma_on() helper ...
2014-10-18Merge tag 'kvm-arm-for-3.18-take-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm Pull second batch of changes for KVM/{arm,arm64} from Marc Zyngier: "The most obvious thing is the sizeable MMU changes to support 48bit VAs on arm64. Summary: - support for 48bit IPA and VA (EL2) - a number of fixes for devices mapped into guests - yet another VGIC fix for BE - a fix for CPU hotplug - a few compile fixes (disabled VGIC, strict mm checks)" [ I'm pulling directly from Marc at the request of Paolo Bonzini, whose backpack was stolen at Düsseldorf airport and will do new keys and rebuild his web of trust. - Linus ] * tag 'kvm-arm-for-3.18-take-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm: arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regs arm: kvm: STRICT_MM_TYPECHECKS fix for user_mem_abort arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 arm/arm64: KVM: map MMIO regions at creation time arm64: kvm: define PAGE_S2_DEVICE as read-only by default ARM: kvm: define PAGE_S2_DEVICE as read-only by default arm/arm64: KVM: add 'writable' parameter to kvm_phys_addr_ioremap arm/arm64: KVM: fix potential NULL dereference in user_mem_abort() arm/arm64: KVM: use __GFP_ZERO not memset() to get zeroed pages ARM: KVM: fix vgic-disabled build arm: kvm: fix CPU hotplug
2014-10-18Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the MIPS pull request for the next kernel: - Zubair's patch series adds CMA support for MIPS. Doing so it also touches ARM64 and x86. - remove the last instance of IRQF_DISABLED from arch/mips - updates to two of the MIPS defconfig files. - cleanup of how cache coherency bits are handled on MIPS and implement support for write-combining. - platform upgrades for Alchemy - move MIPS DTS files to arch/mips/boot/dts/" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (24 commits) MIPS: ralink: remove deprecated IRQF_DISABLED MIPS: pgtable.h: Implement the pgprot_writecombine function for MIPS MIPS: cpu-probe: Set the write-combine CCA value on per core basis MIPS: pgtable-bits: Define the CCA bit for WC writes on Ingenic cores MIPS: pgtable-bits: Move the CCA bits out of the core's ifdef blocks MIPS: DMA: Add cma support x86: use generic dma-contiguous.h arm64: use generic dma-contiguous.h asm-generic: Add dma-contiguous.h MIPS: BPF: Add new emit_long_instr macro MIPS: ralink: Move device-trees to arch/mips/boot/dts/ MIPS: Netlogic: Move device-trees to arch/mips/boot/dts/ MIPS: sead3: Move device-trees to arch/mips/boot/dts/ MIPS: Lantiq: Move device-trees to arch/mips/boot/dts/ MIPS: Octeon: Move device-trees to arch/mips/boot/dts/ MIPS: Add support for building device-tree binaries MIPS: Create common infrastructure for building built-in device-trees MIPS: SEAD3: Enable DEVTMPFS MIPS: SEAD3: Regenerate defconfigs MIPS: Alchemy: DB1300: Add touch penirq support ...
2014-10-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fix from Michael Ellerman: "There was a bit of a misunderstanding between us and the ARM guys in the device tree PCI code, which is breaking virtio on powerpc. This is the minimal fix until we can sort it out properly" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/pci: Fix IO space breakage after of_pci_range_to_resource() change
2014-10-18Merge tag 'for-linus-20141015' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD update from Brian Norris: "Sorry for delaying this a bit later than usual. There's one mild regression from 3.16 that was noticed during the 3.17 cycle, and I meant to send a fix for it along with this pull request. I'll probably try to queue it up for a later pull request once I've had a better look at it, hopefully by -rc2 at the latest. Summary for this pull: NAND - Cleanup for Denali driver - Atmel: add support for new page sizes - Atmel: fix up 'raw' mode support - Atmel: miscellaneous cleanups - New timing mode helpers for non-ONFI NAND - OMAP: allow driver to be (properly) built as a module - bcm47xx: RESET support and other cleanups SPI NOR - Miscellaneous cleanups, to prepare framework for wider use (some further work still pending) - Compile-time configuration to select 4K vs. 64K support for flash that support both (necessary for using UBIFS on some SPI NOR) A few scattered code quality fixes, detected by Coverity See the changesets for more" * tag 'for-linus-20141015' of git://git.infradead.org/linux-mtd: (59 commits) mtd: nand: omap: Correct CONFIG_MTD_NAND_OMAP_BCH help message mtd: nand: Force omap_elm to be built as a module if omap2_nand is a module mtd: move support for struct flash_platform_data into m25p80 mtd: spi-nor: add Kconfig option to disable 4K sectors mtd: nand: Move ELM driver and rename as omap_elm nand: omap2: Replace pr_err with dev_err nand: omap2: Remove horrible ifdefs to fix module probe mtd: nand: add Hynix's H27UCG8T2ATR-BC to nand_ids table mtd: nand: support ONFI timing mode retrieval for non-ONFI NANDs mtd: physmap_of: Add non-obsolete map_rom probe mtd: physmap_of: Fix ROM support via OF MAINTAINERS: add l2-mtd.git, 'next' tree for MTD mtd: denali: fix indents and other trivial things mtd: denali: remove unnecessary parentheses mtd: denali: remove another set-but-unused variable mtd: denali: fix include guard and license block of denali.h mtd: nand: don't break long print messages mtd: bcm47xxnflash: replace some magic numbers mtd: bcm47xxnflash: NAND_CMD_RESET support mtd: bcm47xxnflash: add cmd_ctrl handler ...
2014-10-18x86,kvm,vmx: Preserve CR4 across VM entryAndy Lutomirski
CR4 isn't constant; at least the TSD and PCE bits can vary. TBH, treating CR0 and CR3 as constant scares me a bit, too, but it looks like it's correct. This adds a branch and a read from cr4 to each vm entry. Because it is extremely likely that consecutive entries into the same vcpu will have the same host cr4 value, this fixes up the vmcs instead of restoring cr4 after the fact. A subsequent patch will add a kernel-wide cr4 shadow, reducing the overhead in the common case to just two memory reads and a branch. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Cc: Petr Matousek <pmatouse@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Include fixes for netrom and dsa (Fabian Frederick and Florian Fainelli) 2) Fix FIXED_PHY support in stmmac, from Giuseppe CAVALLARO. 3) Several SKB use after free fixes (vxlan, openvswitch, vxlan, ip_tunnel, fou), from Li ROngQing. 4) fec driver PTP support fixes from Luwei Zhou and Nimrod Andy. 5) Use after free in virtio_net, from Michael S Tsirkin. 6) Fix flow mask handling for megaflows in openvswitch, from Pravin B Shelar. 7) ISDN gigaset and capi bug fixes from Tilman Schmidt. 8) Fix route leak in ip_send_unicast_reply(), from Vasily Averin. 9) Fix two eBPF JIT bugs on x86, from Alexei Starovoitov. 10) TCP_SKB_CB() reorganization caused a few regressions, fixed by Cong Wang and Eric Dumazet. 11) Don't overwrite end of SKB when parsing malformed sctp ASCONF chunks, from Daniel Borkmann. 12) Don't call sock_kfree_s() with NULL pointers, this function also has the side effect of adjusting the socket memory usage. From Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) bna: fix skb->truesize underestimation net: dsa: add includes for ethtool and phy_fixed definitions openvswitch: Set flow-key members. netrom: use linux/uaccess.h dsa: Fix conversion from host device to mii bus tipc: fix bug in bundled buffer reception ipv6: introduce tcp_v6_iif() sfc: add support for skb->xmit_more r8152: return -EBUSY for runtime suspend ipv4: fix a potential use after free in fou.c ipv4: fix a potential use after free in ip_tunnel_core.c hyperv: Add handling of IP header with option field in netvsc_set_hash() openvswitch: Create right mask with disabled megaflows vxlan: fix a free after use openvswitch: fix a use after free ipv4: dst_entry leak in ip_send_unicast_reply() ipv4: clean up cookie_v4_check() ipv4: share tcp_v4_save_options() with cookie_v4_check() ipv4: call __ip_options_echo() in cookie_v4_check() atm: simplify lanai.c by using module_pci_driver ...
2014-10-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull Sparc bugfix from David Miller: "Sparc64 AES ctr mode bug fix" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix FPU register corruption with AES crypto offload.
2014-10-17kprobes/x86: Remove stale ARCH_SUPPORTS_KPROBES_ON_FTRACE defineAnton Blanchard
Commit e7dbfe349d12 ("kprobes/x86: Move ftrace-based kprobe code into kprobes-ftrace.c") switched from using ARCH_SUPPORTS_KPROBES_ON_FTRACE to CONFIG_KPROBES_ON_FTRACE but missed removing the define. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: masami.hiramatsu.pt@hitachi.com Cc: ananth@in.ibm.com Cc: a.p.zijlstra@chello.nl Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-17ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octaSjoerd Simons
Explicitly set the dr_mode for the second dwc3 controller on the Arndale Octa board to host mode. This is required to ensure the controller is initialized in the right mode if the kernel is build with USB gadget support. Reported-By: Andreas Faerber <afaerber@suse.de> Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-10-17ARM: dts: Explicitly set dr_mode on exynos Peach boardsSjoerd Simons
In case the optional dr_mode property isn't set in the dwc3 nodes the the controller will go into OTG mode if both USB host and USB gadget functionality are enabled in the kernel configuration. Unfortunately this results in USB not working on exynos5420-peach-pit and exynos5800-peach-pi with such a kernel configuration unless manually change the mode. To resolve that explicitly configure the dual role mode as host. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-10-16arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regsChristoffer Dall
The EIRSR and ELRSR registers are 32-bit registers on GICv2, and we store these as an array of two such registers on the vgic vcpu struct. However, we access them as a single 64-bit value or as a bitmap pointer in the generic vgic code, which breaks BE support. Instead, store them as u64 values on the vgic structure and do the word-swapping in the assembly code, which already handles the byte order for BE systems. Tested-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-16ARM: dts: qcom: add CM-QS600 boardMike Rapoport
CM-QS600 is a APQ8064 based computer on module. The details are available at http://compulab.co.il/products/computer-on-modules/cm-qs600/ Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-10-16ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phoneTim Bird
This DTS has support for the Sony Xperia Z1 phone (codenamed Honami). This first version of the DTS supports just a serial console. Signed-off-by: Tim Bird <tim.bird@sonymobile.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-10-16ARM: dts: qcom: Add SATA support on IPQ8064/AP148Kumar Gala
Add SATA PHY and SATA AHCI controller nodes to device tree to enable generic ahci support on the IPQ8064/AP148 board. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-10-16powerpc/pci: Fix IO space breakage after of_pci_range_to_resource() changeMichael Ellerman
Commit 0b0b0893d49b "of/pci: Fix the conversion of IO ranges into IO resources" changed the behaviour of of_pci_range_to_resource(). Previously it simply populated the resource based on the arguments. Now it calls pci_register_io_range() and pci_address_to_pio(). These both have two implementations depending on whether PCI_IOBASE is defined, which it is not for powerpc. Further complicating matters, both routines are weak, and powerpc implements it's own version of one - pci_address_to_pio(). However powerpc's implementation depends on other initialisations which are done later in boot. The end result is incorrectly initialised IO space. Often we can get away with that, because we don't make much use of IO space. However virtio requires it, so we see eg: pci_bus 0000:00: root bus resource [io 0xffff] (bus address [0xffffffffffffffff-0xffffffffffffffff]) PCI: Cannot allocate resource region 0 of device 0000:00:01.0, will remap virtio-pci 0000:00:01.0: can't enable device: BAR 0 [io size 0x0020] not assigned The simplest fix for now is to just stop using of_pci_range_to_resource(), and open-code the original implementation, that's all we want it to do. Fixes: 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-15arm: kvm: STRICT_MM_TYPECHECKS fix for user_mem_abortSteve Capper
Commit: b886576 ARM: KVM: user_mem_abort: support stage 2 MMIO page mapping introduced some code in user_mem_abort that failed to compile if STRICT_MM_TYPECHECKS was enabled. This patch fixes up the failing comparison. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Kim Phillips <kim.phillips@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-14Merge tag 'samsung-defconfig' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung defconfig, actually exynos_defconig updates for v3.18" from Kukjin Kim: - enable USB gadget support - enable Maxim77802 support - enable Maxim77693 and I2C GPIO drivers - enable Atmel maXTouch support - enable SBS battery support - enable Control Groups support * tag 'samsung-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: exynos_defconfig: enable USB gadget support ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers ARM: exynos_defconfig: Enable SBS battery support ARM: exynos_defconfig: Enable Control Groups support ARM: exynos_defconfig: Enable Atmel maXTouch support ARM: exynos_defconfig: Enable MAX77802 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-14Merge tag 'samsung-fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes for v3.18" from Kukjin Kim: - fix ifdef around cpu_*_do_[suspend, resume] ops to check CONFIG_ARM_CPU_SUSPEND and not CONFIG_PM_SLEEP - fix exynos_defconfig build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n - fix enabling Samsung PM debug functionality due to recently merged patches and previous merge conflicts - fix pull-up setting in sd4_width8 pin group for exynos4x12 * tag 'samsung-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] ops ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n ARM: SAMSUNG: Restore Samsung PM Debug functionality ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-14Merge tag 'fixes-for-v3.18-merge-window' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "Two omap fixes for v3.18 merge window" from Tony Lindgren: Two omap fixes for issues noticed during the merge window: - We need to enable ARM errata 430973 for omap3 - The smc91x on some early n900 boards need to be disabled for now until the dependencies to specific a bootloader version are fixed * tag 'fixes-for-v3.18-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Disable smc91x on n900 until bootloader dependency is removed ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-14ARM: sunxi_defconfig: enable CONFIG_REGULATOROlof Johansson
Commit 97a13e5289ba ('net: phy: mdio-sun4i: don't select REGULATOR') removed the select of REGULATOR, which means that it now has to be explicitly enabled in the defconfig or things won't work very well. In particular, this fixes a problem with SD/MMC not probing on my A31-based board. Cc: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-15Merge branch 'for-3.18-consistent-ops' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu consistent-ops changes from Tejun Heo: "Way back, before the current percpu allocator was implemented, static and dynamic percpu memory areas were allocated and handled separately and had their own accessors. The distinction has been gone for many years now; however, the now duplicate two sets of accessors remained with the pointer based ones - this_cpu_*() - evolving various other operations over time. During the process, we also accumulated other inconsistent operations. This pull request contains Christoph's patches to clean up the duplicate accessor situation. __get_cpu_var() uses are replaced with with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr(). Unfortunately, the former sometimes is tricky thanks to C being a bit messy with the distinction between lvalues and pointers, which led to a rather ugly solution for cpumask_var_t involving the introduction of this_cpu_cpumask_var_ptr(). This converts most of the uses but not all. Christoph will follow up with the remaining conversions in this merge window and hopefully remove the obsolete accessors" * 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits) irqchip: Properly fetch the per cpu offset percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write. percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t Revert "powerpc: Replace __get_cpu_var uses" percpu: Remove __this_cpu_ptr clocksource: Replace __this_cpu_ptr with raw_cpu_ptr sparc: Replace __get_cpu_var uses avr32: Replace __get_cpu_var with __this_cpu_write blackfin: Replace __get_cpu_var uses tile: Use this_cpu_ptr() for hardware counters tile: Replace __get_cpu_var uses powerpc: Replace __get_cpu_var uses alpha: Replace __get_cpu_var ia64: Replace __get_cpu_var uses s390: cio driver &__get_cpu_var replacements s390: Replace __get_cpu_var uses mips: Replace __get_cpu_var uses MIPS: Replace __get_cpu_var uses in FPU emulator. arm: Replace __this_cpu_ptr with raw_cpu_ptr ...
2014-10-15Merge tag 'clk-for-linus-3.18' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clock tree updates from Mike Turquette: "The clk tree changes for 3.18 are dominated by clock drivers. Mostly fixes and enhancements to existing drivers as well as new drivers. This tag contains a bit more arch code than I usually take due to some OMAP2+ changes. Additionally it contains the restart notifier handlers which are merged as a dependency into several trees. The PXA changes are the only messy part. Due to having a stable tree I had to revert one patch and follow up with one more fix near the tip of this tag. Some dead code is introduced but it will soon become live code after 3.18-rc1 is released as the rest of the PXA family is converted over to the common clock framework. Another trend in this tag is that multiple vendors have started to push the complexity of changing their CPU frequency into the clock driver, whereas this used to be done in CPUfreq drivers. Changes to the clk core include a generic gpio-clock type and a clk_set_phase() function added to the top-level clk.h api. Due to some confusion on the fbdev mailing list the kernel boot parameters documentation was updated to further explain the clk_ignore_unused parameter, which is often required by users of the simplefb driver. Finally some fixes to the locking around the clock debugfs stuff was done to prevent deadlocks when interacting with other subsystems." * tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux: (99 commits) clk: pxa clocks build system fix Revert "arm: pxa: Transition pxa27x to clk framework" clk: samsung: register restart handlers for s3c2412 and s3c2443 clk: rockchip: add restart handler clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate doc/kernel-parameters.txt: clarify clk_ignore_unused arm: pxa: Transition pxa27x to clk framework dts: add devicetree bindings for pxa27x clocks clk: add pxa27x clock drivers arm: pxa: add clock pll selection bits clk: dts: document pxa clock binding clk: add pxa clocks infrastructure clk: gpio-gate: Ensure gpiod_ APIs are prototyped clk: ti: dra7-atl-clock: Mark the device as pm_runtime_irq_safe clk: ti: LLVMLinux: Move __init outside of type definition clk: ti: consider the fact that of_clk_get() might return an error clk: ti: dra7-atl-clock: fix a memory leak clk: ti: change clock init to use generic of_clk_init clk: hix5hd2: add I2C clocks clk: hix5hd2: add watchdog0 clocks ...
2014-10-14sparc64: Fix FPU register corruption with AES crypto offload.David S. Miller
The AES loops in arch/sparc/crypto/aes_glue.c use a scheme where the key material is preloaded into the FPU registers, and then we loop over and over doing the crypt operation, reusing those pre-cooked key registers. There are intervening blkcipher*() calls between the crypt operation calls. And those might perform memcpy() and thus also try to use the FPU. The sparc64 kernel FPU usage mechanism is designed to allow such recursive uses, but with a catch. There has to be a trap between the two FPU using threads of control. The mechanism works by, when the FPU is already in use by the kernel, allocating a slot for FPU saving at trap time. Then if, within the trap handler, we try to use the FPU registers, the pre-trap FPU register state is saved into the slot. Then at trap return time we notice this and restore the pre-trap FPU state. Over the long term there are various more involved ways we can make this work, but for a quick fix let's take advantage of the fact that the situation where this happens is very limited. All sparc64 chips that support the crypto instructiosn also are using the Niagara4 memcpy routine, and that routine only uses the FPU for large copies where we can't get the source aligned properly to a multiple of 8 bytes. We look to see if the FPU is already in use in this context, and if so we use the non-large copy path which only uses integer registers. Furthermore, we also limit this special logic to when we are doing kernel copy, rather than a user copy. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14dtb: Add SGMII based 1GbE node to APM X-Gene SoC device treeIyappan Subramanian
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14x86: bpf_jit: fix two bugs in eBPF JIT compilerAlexei Starovoitov
1. JIT compiler using multi-pass approach to converge to final image size, since x86 instructions are variable length. It starts with large gaps between instructions (so some jumps may use imm32 instead of imm8) and iterates until total program size is the same as in previous pass. This algorithm works only if program size is strictly decreasing. Programs that use LD_ABS insn need additional code in prologue, but it was not emitted during 1st pass, so there was a chance that 2nd pass would adjust imm32->imm8 jump offsets to the same number of bytes as increase in prologue, which may cause algorithm to erroneously decide that size converged. Fix it by always emitting largest prologue in the first pass which is detected by oldproglen==0 check. Also change error check condition 'proglen != oldproglen' to fail gracefully. 2. while staring at the code realized that 64-byte buffer may not be enough when 1st insn is large, so increase it to 128 to avoid buffer overflow (theoretical maximum size of prologue+div is 109) and add runtime check. Fixes: 622582786c9e ("net: filter: x86: internal BPF JIT") Reported-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Tested-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZEChristoffer Dall
When creating or moving a memslot, make sure the IPA space is within the addressable range of the guest. Otherwise, user space can create too large a memslot and KVM would try to access potentially unallocated page table entries when inserting entries in the Stage-2 page tables. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-14arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2Christoffer Dall
This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-14Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main git pull for the drm, I pretty much froze major pulls at -rc5/6 time, and haven't had much fallout, so will probably continue doing that. Lots of changes all over, big internal header cleanup to make it clear drm features are legacy things and what are things that modern KMS drivers should be using. Also big move to use the new generic fences in all the TTM drivers. core: atomic prep work, vblank rework changes, allows immediate vblank disables major header reworking and cleanups to better delinate legacy interfaces from what KMS drivers should be using. cursor planes locking fixes ttm: move to generic fences (affects all TTM drivers) ppc64 caching fixes radeon: userptr support, uvd for old asics, reset rework for fence changes better buffer placement changes, dpm feature enablement hdmi audio support fixes intel: Cherryview work, 180 degree rotation, skylake prep work, execlist command submission full ppgtt prep work cursor improvements edid caching, vdd handling improvements nouveau: fence reworking kepler memory clock work gt21x clock work fan control improvements hdmi infoframe fixes DP audio ast: ppc64 fixes caching fix rcar: rcar-du DT support ipuv3: prep work for capture support msm: LVDS support for mdp4, new panel, gpu refactoring exynos: exynos3250 SoC support, drop bad mmap interface, mipi dsi changes, and component match support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (640 commits) drm/mst: rework payload table allocation to conform better. drm/ast: Fix HW cursor image drm/radeon/kv: add uvd/vce info to dpm debugfs output drm/radeon/ci: add uvd/vce info to dpm debugfs output drm/radeon: export reservation_object from dmabuf to ttm drm/radeon: cope with foreign fences inside the reservation object drm/radeon: cope with foreign fences inside display drm/core: use helper to check driver features drm/radeon/cik: write gfx ucode version to ucode addr reg drm/radeon/si: print full CS when we hit a packet 0 drm/radeon: remove unecessary includes drm/radeon/combios: declare legacy_connector_convert as static drm/radeon/atombios: declare connector convert tables as static drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table drm/radeon/dpm: drop clk/voltage dependency filters for BTC drm/radeon/dpm: drop clk/voltage dependency filters for CI drm/radeon/dpm: drop clk/voltage dependency filters for SI drm/radeon/dpm: drop clk/voltage dependency filters for NI drm/radeon: disable audio when we disable hdmi (v2) drm/radeon: split audio enable between eg and r600 (v2) ...
2014-10-14Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild changes from Michal Marek: - fix for handling dependencies of *-objs targets by Masahiro Yamada - lots of cleanups in the kbuild machinery, also by Masahiro - fixes for the kconfig build to use an UTF-8 capable ncurses library if possible and to build on not-so-standard installs - some more minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Do not reference *-n variables in the Makefile kbuild: simplify build, clean, modbuiltin shorthands kbuild: arm: Do not define "comma" twice kbuild: remove obj-n and lib-n handling kbuild: remove unnecessary variable initializaions kbuild: remove unnecessary "obj- := dummy.o" trick kbuild: handle C=... and M=... after entering into build directory kbuild: use $(Q) for sub-make target kbuild: fake the "Entering directory ..." message more simply kconfig/lxdialog: get ncurses CFLAGS with pkg-config kconfig: nconfig: fix multi-byte UTF handling kconfig: lxdialog: fix spelling kbuild: Make scripts executable kbuild: remove redundant clean-files from scripts/kconfig/Makefile kbuild: refactor script/kconfig/Makefile kbuild: handle the dependency of multi-objs hostprogs appropriately kbuild: handle multi-objs dependency appropriately
2014-10-14Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds
Merge second patch-bomb from Andrew Morton: - a few hotfixes - drivers/dma updates - MAINTAINERS updates - Quite a lot of lib/ updates - checkpatch updates - binfmt updates - autofs4 - drivers/rtc/ - various small tweaks to less used filesystems - ipc/ updates - kernel/watchdog.c changes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits) mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared kernel/param: consolidate __{start,stop}___param[] in <linux/moduleparam.h> ia64: remove duplicate declarations of __per_cpu_start[] and __per_cpu_end[] frv: remove unused declarations of __start___ex_table and __stop___ex_table kvm: ensure hard lockup detection is disabled by default kernel/watchdog.c: control hard lockup detection default staging: rtl8192u: use %*pEn to escape buffer staging: rtl8192e: use %*pEn to escape buffer staging: wlan-ng: use %*pEhp to print SN lib80211: remove unused print_ssid() wireless: hostap: proc: print properly escaped SSID wireless: ipw2x00: print SSID via %*pE wireless: libertas: print esaped string via %*pE lib/vsprintf: add %*pE[achnops] format specifier lib / string_helpers: introduce string_escape_mem() lib / string_helpers: refactoring the test suite lib / string_helpers: move documentation to c-file include/linux: remove strict_strto* definitions arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggable fs: check bh blocknr earlier when searching lru ...
2014-10-14Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu update from Greg Ungerer: "The major change is to remove the arch/m68k/platform directory. The coldfire (and other non-mmu m68k platform) code is moved to the arch/m68k level, making them consistent with the traditional m68k platforms. A couple of other minor miscellaneous fixes as well" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: Fix typo 'COFNIG_MBAR' m68knommu: add missing ioport_map() and ioport_unmap() m68k/coldfire: remove second asm/mcfclk.h inclusion in m54xx.c m68knommu: fix size of address field for 5272 interrupt controller m68k: fix crufty 68000 and 68360 intro comments m68k: remove the unused arch/m68k/platform directory m68k: move non-mmu 68360 platform code m68k: move non-mmu 68000 platform code m68k: fix crufty ColdFire intro comments m68k: move coldfire platform code
2014-10-14Merge tag 'please-pull-sys_bpf' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 update from Tony Luck: "Wire up bpf syscall for ia64" * tag 'please-pull-sys_bpf' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Enable bpf syscall for ia64
2014-10-14Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds
Pull UML update from Richard Weinberger: "Besides of fixes this contains also support for CONFIG_STACKTRACE by Daniel Walter" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: net: Eliminate NULL test after alloc_bootmem um: Add support for CONFIG_STACKTRACE um: ubd: Fix for processes stuck in D state forever um: delete unnecessary bootmem struct page array um: remove csum_partial_copy_generic_i386 to clean up exception table
2014-10-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "This patch set contains the main portion of the changes for 3.18 in regard to the s390 architecture. It is a bit bigger than usual, mainly because of a new driver and the vector extension patches. The interesting bits are: - Quite a bit of work on the tracing front. Uprobes is enabled and the ftrace code is reworked to get some of the lost performance back if CONFIG_FTRACE is enabled. - To improve boot time with CONFIG_DEBIG_PAGEALLOC, support for the IPTE range facility is added. - The rwlock code is re-factored to improve writer fairness and to be able to use the interlocked-access instructions. - The kernel part for the support of the vector extension is added. - The device driver to access the CD/DVD on the HMC is added, this will hopefully come in handy to improve the installation process. - Add support for control-unit initiated reconfiguration. - The crypto device driver is enhanced to enable the additional AP domains and to allow the new crypto hardware to be used. - Bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits) s390/ftrace: simplify enabling/disabling of ftrace_graph_caller s390/ftrace: remove 31 bit ftrace support s390/kdump: add support for vector extension s390/disassembler: add vector instructions s390: add support for vector extension s390/zcrypt: Toleration of new crypto hardware s390/idle: consolidate idle functions and definitions s390/nohz: use a per-cpu flag for arch_needs_cpu s390/vtime: do not reset idle data on CPU hotplug s390/dasd: add support for control unit initiated reconfiguration s390/dasd: fix infinite loop during format s390/mm: make use of ipte range facility s390/setup: correct 4-level kernel page table detection s390/topology: call set_sched_topology early s390/uprobes: architecture backend for uprobes s390/uprobes: common library for kprobes and uprobes s390/rwlock: use the interlocked-access facility 1 instructions s390/rwlock: improve writer fairness s390/rwlock: remove interrupt-enabling rwlock variant. s390/mm: remove change bit override support ...
2014-10-14Merge branches 'x86-ras-for-linus', 'x86-uv-for-linus' and ↵Linus Torvalds
'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 ras, uv and vdso fixlets from Ingo Molnar: "ras: tone down a kernel message to only occur during initial bootup, not during suspend/resume cycles. uv: a cleanup commit vdso: a fix to error checking" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Avoid showing repetitive message from intel_init_thermal() * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/uv: Remove unnecessary #ifdef * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Fix vdso2c's special_pages[] error checking
2014-10-14Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc smaller fixes that missed the v3.17 cycle" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Add arch/x86/purgatory/ make generated files to gitignore x86: Fix section conflict for numachip x86: Reject x32 executables if x32 ABI not supported x86_64, entry: Filter RFLAGS.NT on entry from userspace x86, boot, kaslr: Fix nuisance warning on 32-bit builds
2014-10-14Merge branch 'x86-seccomp-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 seccomp changes from Ingo Molnar: "This tree includes x86 seccomp filter speedups and related preparatory work, which touches core seccomp facilities as well. The main idea is to split seccomp into two phases, to be able to enter a simple fast path for syscalls with ptrace side effects. There's no substantial user-visible (and ABI) effects expected from this, except a change in how we emit a better audit record for SECCOMP_RET_TRACE events" * 'x86-seccomp-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86_64, entry: Use split-phase syscall_trace_enter for 64-bit syscalls x86_64, entry: Treat regs->ax the same in fastpath and slowpath syscalls x86: Split syscall_trace_enter into two phases x86, entry: Only call user_exit if TIF_NOHZ x86, x32, audit: Fix x32's AUDIT_ARCH wrt audit seccomp: Document two-phase seccomp and arch-provided seccomp_data seccomp: Allow arch code to provide seccomp_data seccomp: Refactor the filter callback and the API seccomp,x86,arm,mips,s390: Remove nr parameter from secure_computing
2014-10-14Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "The main changes in this tree are: - fix and update Intel Quark [Galileo] SoC platform support - update IOSF chipset side band interface and make it available via debugfs - enable HPETs on Soekris net6501 and other e6xx based systems" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Add cpu_detect_cache_sizes to init_intel() add Quark legacy_cache() x86: Quark: Comment setup_arch() to document TLB/PGE bug x86/intel/quark: Switch off CR4.PGE so TLB flush uses CR3 instead x86/platform/intel/iosf: Add debugfs config option for IOSF x86/platform/intel/iosf: Add better description of IOSF driver in config x86/platform/intel/iosf: Add Braswell PCI ID x86/platform/pmc_atom: Fix warning when CONFIG_DEBUG_FS=n x86: HPET force enable for e6xx based systems x86/iosf: Add debugfs support x86/iosf: Add Kconfig prompt for IOSF_MBI selection
2014-10-14Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: "This tree includes the following changes: - fix memory hotplug - fix hibernation bootup memory layout assumptions - fix hyperv numa guest kernel messages - remove dead code - update documentation" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Update memory map description to list hypervisor-reserved area x86/mm, hibernate: Do not assume the first e820 area to be RAM x86/mm/numa: Drop dead code and rename setup_node_data() to setup_alloc_data() x86/mm/hotplug: Modify PGD entry when removing memory x86/mm/hotplug: Pass sync_global_pgds() a correct argument in remove_pagetable() x86: Remove set_pmd_pfn
2014-10-14Merge branch 'x86-microcode-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode loading updates from Ingo Molnar: "Misc smaller cleanups" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode, intel: Fix total_size computation x86, microcode, intel: Rename apply_microcode and declare it static x86, microcode, intel: Fix typos x86, microcode, intel: Add missing static declarations x86, microcode, amd: Fix missing static declaration
2014-10-14Merge branch 'x86-fpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 FPU updates from Ingo Molnar: "x86 FPU handling fixes, cleanups and enhancements from Oleg. The signal handling race fix and the __restore_xstate_sig() preemption fix for eager-mode is marked for -stable as well" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: copy_thread: Don't nullify ->ptrace_bps twice x86, fpu: Shift "fpu_counter = 0" from copy_thread() to arch_dup_task_struct() x86, fpu: copy_process: Sanitize fpu->last_cpu initialization x86, fpu: copy_process: Avoid fpu_alloc/copy if !used_math() x86, fpu: Change __thread_fpu_begin() to use use_eager_fpu() x86, fpu: __restore_xstate_sig()->math_state_restore() needs preempt_disable() x86, fpu: shift drop_init_fpu() from save_xstate_sig() to handle_signal()
2014-10-14Merge branch 'x86-cpufeature-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpufeature updates from Ingo Molnar: "This tree includes the following changes: - Introduce DISABLED_MASK to list disabled CPU features, to simplify CPU feature handling and avoid excessive #ifdefs - Remove the lightly used cpu_has_pae() primitive" * 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Add more disabled features x86: Introduce disabled-features x86: Axe the lightly-used cpu_has_pae