index
:
linux-toradex.git
colibri
colibri_vf
tegra
tegra-next
toradex_4.1-2.0.x-imx
toradex_4.1-2.0.x-imx-next
toradex_4.14-2.0.x-imx
toradex_4.14-2.0.x-imx-next
toradex_4.14-2.0.x-imx-rebased
toradex_4.14-2.3.x-imx
toradex_4.19.y
toradex_4.19.y-rt
toradex_4.20.y
toradex_4.9-1.0.x-imx
toradex_4.9-1.0.x-imx-next
toradex_4.9-1.0.x-imx-rebased
toradex_4.9-2.3.x-imx
toradex_4.9-2.3.x-imx-next
toradex_4.9-2.3.x-imx-rebased
toradex_5.0.y
toradex_5.15-2.0.x-imx
toradex_5.15-2.1.x-imx
toradex_5.15-2.2.x-imx
toradex_5.2.y
toradex_5.3.y
toradex_5.4-2.1.x-imx
toradex_5.4-2.3.x-imx
toradex_5.4.y
toradex_imx6
toradex_imx_3.10.17_1.0.0_ga
toradex_imx_3.10.17_1.0.0_ga-next
toradex_imx_3.14.28_1.0.0_ga
toradex_imx_3.14.52_1.1.0_ga
toradex_imx_3.14.52_1.1.0_ga-next
toradex_imx_4.1.15_1.0.0_ga
toradex_imx_4.1.15_1.0.0_ga-next
toradex_imx_4.14.78_1.0.0_ga-bring_up
toradex_imx_4.9.123_imx8mm_ga-bring_up
toradex_imx_4.9.51_imx8_beta1-bring_up
toradex_imx_4.9.51_imx8_beta1-bring_up_ov5640
toradex_imx_4.9.51_imx8_beta2-bring_up
toradex_ti-linux-5.10.y_bringup
toradex_ti-linux-6.1.y
toradex_tk1_l4t_r21.5
toradex_tk1_l4t_r21.6
toradex_tk1_l4t_r21.7
toradex_tk1_l4t_r21.7-next
toradex_vf_3.18
toradex_vf_3.18-next
toradex_vf_4.0
toradex_vf_4.0-next
toradex_vf_4.1
toradex_vf_4.1-next
toradex_vf_4.4
toradex_vf_4.4-next
Linux kernel for Apalis, Colibri and Verdin modules
Marcel Ziswiler
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
arch
Age
Commit message (
Expand
)
Author
2013-01-31
ENGR00242214 IMX PWM:Correct duty cycle calculation
Liu Ying
2013-01-30
ENGR00242269 MX6 PCIE:Print out link up failure log
Liu Ying
2013-01-28
ENGR00241003-1 mx6: need to add delay in LDO voltage setting
Anson Huang
2013-01-21
ENGR00240990 MX6 HDMI dongle:Configure HDMI PHY registers
Liu Ying
2013-01-21
ENGR00240740-2 ARM:IPUv3:Add an interface to disable IPU hsp clk
Liu Ying
2013-01-18
ENGR00240228: IPUv3: CSI: Correct enum definition of IPU_CSI_DATA_WIDTH
Sheng Nan
2013-01-18
ENGR00240650 pcie: imx: fix ep device no int when pcie switch is used
Richard Zhu
2013-01-14
ENGR00239905 PCIe Enable PCIe switch support
Richard Zhu
2013-01-08
ENGR00237364: board-mx6q_sabreauto fix adv7180 tvin powerdown
Adrian Alonso
2013-01-08
ENGR00232879 mx6sl: EPDC VDDH and VPOS power on/off sequence is wrong
Peter Chan
2013-01-05
ENGR00238307 MX6SL_EVK bluetooth: Add support to Silex SXSDMAN module
Lionel Xu
2013-01-05
ENGR00238281 MX6SL_EVK: Add rfkill interface to bluetooth
Lionel Xu
2013-01-04
ENGR00238809-1 mx6sl: clock: add dependency of IRAM clk
Gary Zhang
2012-12-21
ENGR00237742 busfreq:fix IPG_PERCLK will be decreased to 6M once exit low bus
Robin Gong
2012-12-12
ENGR00236837 MX6SL-Fix random crash caused by incorrect setting of IPG clk rate.
Ranjani Vaidyanathan
2012-12-11
ENGR00235817 mx6: use SNVS LPGPR register to store boot mode value.
Zhang Jiejing
2012-12-06
ENGR00236031 MX6 USB :Change default USB H1 and OTG driver load order
make shi
2012-12-05
ENGR00235624 Quad/DualLite ARD: MTD partition non aligned
Alejandro Sierra
2012-12-05
ENGR00235630 MX6 USB :fix USB does not work when plug in device during suspend
make shi
2012-11-29
ENGR00235268: change caam_ipg_clk's CG to CG6
Terry Lv
2012-11-29
ENGR00223037 fsl: Add new board HDMI dongle for imx6 Q/DL.
Zhang Xiaodong
2012-11-28
ENGR00235081 Quad DL: Fix chip select for SPI-NOR and flags
Alejandro Sierra
2012-11-26
ENGR00234685-2 mx6q_sabreauto: change Sabreauto board to LDO-ENABLED mode
Robin Gong
2012-11-26
ENGR00234685-1 cpufreq:fix one bug in cpufreq driver if I2C transfer error
Robin Gong
2012-11-22
ENGR00234531 fix MFGTOOL issue after USB module loadable done
Tony LIU
2012-11-22
ENGR00234411-2 CPUFREQ: fix one code bug on regulator restore when fail
Robin Gong
2012-11-22
ENGR00234411-1 Sabreauto: fix error print COULD NOT SET GP VOLTAGE.
Robin Gong
2012-11-20
ENGR00234354-2: board-mx6q_sabreauto aline weim-nor partition layout
Adrian Alonso
2012-11-20
ENGR00234354-1: board-mx6q_sabreauto aline spi-nor partition layout
Adrian Alonso
2012-11-20
ENGR00234217 cpufreq:fix loops_per_jiffy wrong on new suspend flow of cpufreq
Robin Gong
2012-11-19
ENGR00234045 fix building error caused by ENGR00233366
Robin Gong
2012-11-19
ENGR00233366-4 WDOG LDO_BYPASS: fix wdog2 to reset external pmic in ldo bypass
Robin Gong
2012-11-19
ENGR00233366-3 CPUFREQ:add cpufreq restore back if set fail
Robin Gong
2012-11-19
ENGR00233366-2 mx6q_sabresd mx6sl_arm2 mx6sl_evk: config in LDO bypass
Robin Gong
2012-11-19
ENGR00233366-1 Anatop PFUZE: LDO bypass can be configed by cmdline
Robin Gong
2012-11-19
ENGR00234040 FUSE 1.2G: add fuse bit for 1.2G
Robin Gong
2012-11-17
ENGR00233770 i.mx6q/vpu: Add fuse check for VPU_DISABLE feature
Jason Liu
2012-11-16
ENGR00233705 [MX6SL] -Fix suspend/resume issue when SD1 is used to boot.
Ranjani Vaidyanathan
2012-11-16
ENGR00233929: add kernel command line to enable snvs
Terry Lv
2012-11-16
ENGR00233387: MLB: read fuse to check if to enable mlb
Terry Lv
2012-11-15
ENGR00233728 mx6 usb: change usb driver load from arch_initcall to module_init
make shi
2012-11-15
ENGR00233732 mx6dl: change 996M setpoint voltage
Anson Huang
2012-11-14
ENGR00233051-03 Mx6 USB: msl implementation for USB OTG modulization
make shi
2012-11-14
ENGR00233051-02 Mx6 USB: msl headfile for OTG modulization
make shi
2012-11-14
ENGR00233051-01 Mx6 USB: configure change for OTG modulization
make shi
2012-11-13
ENGR00232945-4: CAAM: enable SNVS config
Terry Lv
2012-11-09
ENGR00224109 - MX6 : FEC : optimize ENET_REF_CLK PAD configuration.
Fugang Duan
2012-11-07
ENGR00232586 mx6: increase PUPSCR to make sure LDO is ready for resume
Anson Huang
2012-11-06
ENGR00231266-4: board-mx6q_sabreauto adv7280 csi-tx slave address
Adrian Alonso
2012-11-06
ENGR00231773-7 DMA: add interface to trigger SDMA event pending bit
Chen Liangjun
[next]