summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2010-08-01KVM: VMX: Only reset MMU when necessarySheng Yang
Only modifying some bits of CR0/CR4 needs paging mode switch. Modify EFER.NXE bit would result in reserved bit updates. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: x86: Clean up duplicate assignmentSheng Yang
mmu.free() already set root_hpa to INVALID_PAGE, no need to do it again in the destory_kvm_mmu(). kvm_x86_ops->set_cr4() and set_efer() already assign cr4/efer to vcpu->arch.cr4/efer, no need to do it again later. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: x86 emulator: Add missing decoder flags for xor instructionsMohammed Gamal
This adds missing decoder flags for xor instructions (opcodes 0x34 - 0x35) Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: x86 emulator: Add missing decoder flags for sub instructionMohammed Gamal
This adds missing decoder flags for sub instructions (opcodes 0x2c - 0x2d) Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: x86 emulator: Add test acc, imm instruction (opcodes 0xA8 - 0xA9)Mohammed Gamal
This adds test acc, imm instruction to the x86 emulator Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: pass correct parameter to kvm_mmu_free_some_pagesMarcelo Tosatti
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: VMX: VMXON/VMXOFF usage changesDongxiao Xu
SDM suggests VMXON should be called before VMPTRLD, and VMXOFF should be called after doing VMCLEAR. Therefore in vmm coexistence case, we should firstly call VMXON before any VMCS operation, and then call VMXOFF after the operation is done. Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: VMX: VMCLEAR/VMPTRLD usage changesDongxiao Xu
Originally VMCLEAR/VMPTRLD is called on vcpu migration. To support hosted VMM coexistance, VMCLEAR is executed on vcpu schedule out, and VMPTRLD is executed on vcpu schedule in. This could also eliminate the IPI when doing VMCLEAR. Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: VMX: Some minor changes to code structureDongxiao Xu
Do some preparations for vmm coexistence support. Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: VMX: Define new functions to wrapper direct call of asm codeDongxiao Xu
Define vmcs_load() and kvm_cpu_vmxon() to avoid direct call of asm code. Also move VMXE bit operation out of kvm_cpu_vmxoff(). Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: MMU: Fix free memory accounting race in mmu_alloc_roots()Avi Kivity
We drop the mmu lock between freeing memory and allocating the roots; this allows some other vcpu to sneak in and allocate memory. While the race is benign (resulting only in temporary overallocation, not oom) it is simple and easy to fix by moving the freeing close to the allocation. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: inject #UD if instruction emulation fails and exit to userspaceGleb Natapov
Do not kill VM when instruction emulation fails. Inject #UD and report failure to userspace instead. Userspace may choose to reenter guest if vcpu is in userspace (cpl == 3) in which case guest OS will kill offending process and continue running. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freedGui Jianfeng
Currently, kvm_mmu_zap_page() returning the number of freed children sp. This might confuse the caller, because caller don't know the actual freed number. Let's make kvm_mmu_zap_page() return the number of pages it actually freed. Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: MMU: Fix debug output error in walk_addr()Gui Jianfeng
Fix a debug output error in walk_addr Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: MMU: mark page table dirty when a pte is actually modifiedGui Jianfeng
Sometime cmpxchg_gpte doesn't modify gpte, in such case, don't mark page table page as dirty. Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: SVM: Allow EFER.LMSLE to be set with nested svmJoerg Roedel
This patch enables setting of efer bit 13 which is allowed in all SVM capable processors. This is necessary for the SLES11 version of Xen 4.0 to boot with nested svm. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: SVM: Dump vmcb contents on failed vmrunJoerg Roedel
This patch adds a function to dump the vmcb into the kernel log and calls it after a failed vmrun to ease debugging. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: Get rid of KVM_REQ_KICKAvi Kivity
KVM_REQ_KICK poisons vcpu->requests by having a bit set during normal operation. This causes the fast path check for a clear vcpu->requests to fail all the time, triggering tons of atomic operations. Fix by replacing KVM_REQ_KICK with a vcpu->guest_mode atomic. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: do not inject exception directly into vcpuGleb Natapov
Return exception as a result of instruction emulation and handle injection in KVM code. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: move interruptibility state tracking out of emulatorGleb Natapov
Emulator shouldn't access vcpu directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: handle shadowed registers outside emulatorGleb Natapov
Emulator shouldn't access vcpu directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: use shadowed register in emulate_sysexit()Gleb Natapov
emulate_sysexit() should use shadowed registers copy instead of looking into vcpu state directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: set RFLAGS outside x86 emulator codeGleb Natapov
Removes the need for set_flags() callback. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: advance RIP outside x86 emulator codeGleb Natapov
Return new RIP as part of instruction emulation result instead of updating KVM's RIP from x86 emulator code. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: handle emulation failure case firstGleb Natapov
If emulation failed return immediately. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: do not inject #PF in (read|write)_emulated() callbacksGleb Natapov
Return error to x86 emulator instead of injection exception behind its back. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: remove export of emulator_write_emulated()Gleb Natapov
It is not called directly outside of the file it's defined in anymore. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: x86_emulate_insn() return -1 only in case of emulation ↵Gleb Natapov
failure Currently emulator returns -1 when emulation failed or IO is needed. Caller tries to guess whether emulation failed by looking at other variables. Make it easier for caller to recognise error condition by always returning -1 in case of failure. For this new emulator internal return value X86EMUL_IO_NEEDED is introduced. It is used to distinguish between error condition (which returns X86EMUL_UNHANDLEABLE) and condition that requires IO exit to userspace to continue emulation. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: fill in run->mmio details in (read|write)_emulated functionGleb Natapov
Fill in run->mmio details in (read|write)_emulated function just like pio does. There is no point in filling only vcpu fields there just to copy them into vcpu->run a little bit later. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: fix X86EMUL_RETRY_INSTR and X86EMUL_CMPXCHG_FAILED valuesGleb Natapov
Currently X86EMUL_PROPAGATE_FAULT, X86EMUL_RETRY_INSTR and X86EMUL_CMPXCHG_FAILED have the same value so caller cannot distinguish why function such as emulator_cmpxchg_emulated() (which can return both X86EMUL_PROPAGATE_FAULT and X86EMUL_CMPXCHG_FAILED) failed. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: make (get|set)_dr() callback return error if it failsGleb Natapov
Make (get|set)_dr() callback return error if it fails instead of injecting exception behind emulator's back. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: make set_cr() callback return error if it failsGleb Natapov
Make set_cr() callback return error if it fails instead of injecting #GP behind emulator's back. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: cleanup some direct calls into kvm to use existing callbacksGleb Natapov
Use callbacks from x86_emulate_ops to access segments instead of calling into kvm directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: add get_cached_segment_base() callback to x86_emulate_opsGleb Natapov
On VMX it is expensive to call get_cached_descriptor() just to get segment base since multiple vmcs_reads are done instead of only one. Introduce new call back get_cached_segment_base() for efficiency. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: add (set|get)_msr callbacks to x86_emulate_opsGleb Natapov
Add (set|get)_msr callbacks to x86_emulate_ops instead of calling them directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: add (set|get)_dr callbacks to x86_emulate_opsGleb Natapov
Add (set|get)_dr callbacks to x86_emulate_ops instead of calling them directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: handle "far address" source operandGleb Natapov
ljmp/lcall instruction operand contains address and segment. It can be 10 bytes long. Currently we decode it as two different operands. Fix it by introducing new kind of operand that can hold entire far address. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: cleanup nop emulationGleb Natapov
Make it more explicit what we are checking for. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: cleanup xchg emulationGleb Natapov
Dst operand is already initialized during decoding stage. No need to reinitialize. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: fix Move r/m16 to segment register decodingGleb Natapov
This instruction does not need generic decoding for its dst operand. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: introduce read cacheGleb Natapov
Introduce read cache which is needed for instruction that require more then one exit to userspace. After returning from userspace the instruction will be re-executed with cached read value. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: VMX: Avoid writing HOST_CR0 every entryAvi Kivity
cr0.ts may change between entries, so we copy cr0 to HOST_CR0 before each entry. That is slow, so instead, set HOST_CR0 to have TS set unconditionally (which is a safe value), and issue a clts() just before exiting vcpu context if the task indeed owns the fpu. Saves ~50 cycles/exit. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: kvm_pdptr_read() may sleepAvi Kivity
Annotate it thusly. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86: avoid unnecessary bitmap allocation when memslot is cleanTakuya Yoshikawa
Although we always allocate a new dirty bitmap in x86's get_dirty_log(), it is only used as a zero-source of copy_to_user() and freed right after that when memslot is clean. This patch uses clear_user() instead of doing this unnecessary zero-source allocation. Performance improvement: as we can expect easily, the time needed to allocate a bitmap is completely reduced. In my test, the improved ioctl was about 4 to 10 times faster than the original one for clean slots. Furthermore, reducing memory allocations and copies will produce good effects to caches too. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: VMX: Simplify vmx_get_nmi_mask()Avi Kivity
!! is not needed due to the cast to bool. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: Avoid killing userspace through guest SRAO MCE on unmapped pagesHuang Ying
In common cases, guest SRAO MCE will cause corresponding poisoned page be un-mapped and SIGBUS be sent to QEMU-KVM, then QEMU-KVM will relay the MCE to guest OS. But it is reported that if the poisoned page is accessed in guest after unmapping and before MCE is relayed to guest OS, userspace will be killed. The reason is as follows. Because poisoned page has been un-mapped, guest access will cause guest exit and kvm_mmu_page_fault will be called. kvm_mmu_page_fault can not get the poisoned page for fault address, so kernel and user space MMIO processing is tried in turn. In user MMIO processing, poisoned page is accessed again, then userspace is killed by force_sig_info. To fix the bug, kvm_mmu_page_fault send HWPOISON signal to QEMU-KVM and do not try kernel and user space MMIO processing for poisoned page. [xiao: fix warning introduced by avi] Reported-by: Max Asbock <masbock@linux.vnet.ibm.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-07-28Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: x86,kgdb: Fix hw breakpoint regression
2010-07-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: davinci: da850/omap-l138 evm: account for DEFDCDC{2,3} being tied high regulator: tps6507x: allow driver to use DEFDCDC{2,3}_HIGH register wm8350-regulator: fix wm8350_register_regulator error handling ab3100: fix off-by-one value range checking for voltage selector
2010-07-28x86,kgdb: Fix hw breakpoint regressionJason Wessel
HW breakpoints events stopped working correctly with kgdb as a result of commit: 018cbffe6819f6f8db20a0a3acd9bab9bfd667e4 (Merge commit 'v2.6.33' into perf/core). The regression occurred because the behavior changed for setting NOTIFY_STOP as the return value to the die notifier if the breakpoint was known to the HW breakpoint API. Because kgdb is using the HW breakpoint API to register HW breakpoints slots, it must also now implement the overflow_handler call back else kgdb does not get to see the events from the die notifier. The kgdb_ll_trap function will be changed to be general purpose code which can allow an easy way to implement the hw_breakpoint API overflow call back. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Dongdong Deng <dongdong.deng@windriver.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-07-28davinci: da850/omap-l138 evm: account for DEFDCDC{2,3} being tied highSekhar Nori
Per the da850/omap-l138 Beta EVM SOM schematic, the DEFDCDC2 and DEFDCDC3 lines are tied high. This leads to a 3.3V IO and 1.2V CVDD voltage. Pass the right platform data to the TPS6507x driver so it can operate on the DEFDCDC{2,3}_HIGH register to read and change voltage levels. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-24 15:42:13 +0000