summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-02-11ARM64: defconfig: add extcon_usb_gpio configMax Krummenacher
This is used with the USB_C port on Colibri iMX8X. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-02-11ARM64: defconfig: Add atmel_mxt_ts touchscreen driverPhilippe Schenker
This adds the touchscreen atmel_mxt_ts driver used by displays from toradex. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-11arm64: defconfig: add modversionsMax Krummenacher
CONFIG_MODVERSIONS allows to use kernel modules slightly different from the running kernel. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-02-11arm: defconfig: add spi bit banging driverMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit fe0736d779d71237cba9f6ed5ebf6d7fdf71d9cd) (cherry picked from commit eb19205dcadee79170778136e149643b20b71b62)
2020-02-11arm: defconfig: add fxl6408 gpio expanderMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 13244ea064560813f3c4b67d02838930daa56fb4) (cherry picked from commit f45782b76f20f5adf3ac0b234c458846cd3704fc)
2020-02-11arm: defconfig: add lt8912 drm brigeMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit e9656428bfa3a85c99e424785dea50628992e394) (cherry picked from commit 7cbf898f1287bec82b3a25ed47633539c61ed49c)
2020-02-11arm: defconfig: add touchcontroller ad7879Max Krummenacher
It is used on the Colibri iMX8QXP Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 961a35836af3e5dce034018b3e010bf3499e2f25) (cherry picked from commit 78bd4e96eaee1a103a8bd52a2568e6b033ce26ba)
2020-02-11arm64: defconfig: add SGTL5000 supportStefan Agner
Add NXP SGTL5000 codec support for Apalis iMX8. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> (cherry picked from commit 1ed393a89bc808273f9653020b2fcad4d655f765) Conflicts: arch/arm64/configs/defconfig Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 4f8e7db9db1bac86c6c5bc2f78793ebebbd60a14) (cherry picked from commit ed7618f8085c7f02fb9d9bf8fe160ec0025671f4) (cherry picked from commit 52ae1fefc8794d41ac7544fc22028ac9a04a6424)
2020-02-11arm64: defconfig: add M41T0 RTC supportStefan Agner
Add DS1307 family RTC support which also supports M41T0 RTC as used on our carrier board. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> (cherry picked from commit d6ec2d954abbdf639cbb435c89cad71775e24795) (cherry picked from commit a8fa55ea007eb29f8f18fc86cbab3bab0d45a90f) (cherry picked from commit baf09ae0654769311a390382f22d64d195c4b167) (cherry picked from commit 32df0ec733ee19740f2075c4501291febd722505)
2020-02-11add configs required by Toradex Easy InstallerStefan Agner
Signed-off-by: Stefan Agner <stefan.agner@toradex.com> (cherry picked from commit 944f626fab84a4457f36ec11270fd243f8d80edf) Conflicts: arch/arm64/configs/defconfig Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 75b89c90ac9c3a3b1374354cd3cc1aaa70cea0f0) (cherry picked from commit 6efcd53a6bd3d4f437f4fd2362dab9685863e639) (cherry picked from commit ff5f17d53273a644b2c8d76fbd495d9d2eb6e21b)
2020-02-11arm64: defconfig: add configs for BluetoothStefan Agner
Add Marvell/USB Bluetooth support. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> (cherry picked from commit 9fe8e87ad955c087d2fa6a35fda3287aa5dccbd7) Conflicts: arch/arm64/configs/defconfig Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 9bd23adac54773bfd2ed02d577667053cc61dd74) (cherry picked from commit 9380becfb11a1cb2502c7938a19b84785735b9a9) (cherry picked from commit f17e33d650885310866b300c578a3f4d31d5332f)
2020-02-11arm64: defconfig: add Marvell Wi-Fi supportStefan Agner
Add Marvell Wi-Fi support using the mwifiex driver. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> (cherry picked from commit acc1f6790a86f38398da46bc30908c8e8e2c0757) Conflicts: arch/arm64/configs/defconfig Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 734a9127e49ce3592b804afb8379f8fa1fc41c9e) (cherry picked from commit 0a3eeddc6bcf29d9ceacb4838bf26eeb1af36095) (cherry picked from commit a7eac7df03d30f66f6b5f855727f0f1a2d4666f2)
2020-02-11arm64: defconfig: add configs for Apalis iMX8Stefan Agner
Add GPIO fan/backlight for Apalis iMX8. Enable USB camera support. Also enable configs relevant for MIPI CSI2 camera (OV5640) support, but this needs further changes to the driver to work with i.MX8QM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> (cherry picked from commit 6a74107935a0d4a3a7cebf879a1ae684366bec19) Conflicts: arch/arm64/configs/defconfig Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 471a0d336d637ed1c66c96d10a9f998d0cafc510) (cherry picked from commit 153848b2e63330fe38315f22baac7817e77f1d00) (cherry picked from commit 3fb7df4524c6ef6002a940c12ecee199832d321a)
2020-02-09MLK-18433 PCI: imx: remove the lpcg_xxx clocks in driverRichard Zhu
Remove the lpcg_xxx clocks codes, since they are HW gated. These clocks controlled by HW, and would be turned on automatically, if there are access operations. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> (cherry picked from commit 9b8da32493057502a912b6d1426eadeb76780e69) Conflicts: arch/arm64/boot/dts/freescale/fsl-imx8qm.dtsi drivers/pci/host/pci-imx6.c Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 7615a560c48aeb53911c7a6f025420c0f9a5a51f) (cherry picked from commit 0507816aa4b9a4f5764d308b23332fc297e6fe0f) (cherry picked from commit 24258f088b89df68e5fa2c54eb3334ff50fcb8f0)
2020-02-09ARM: dts: apalis_imx6: further clean-upMarcel Ziswiler
Further clean-up Apalis iMX6 device trees. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-02-09(apalis|colibri)*_defconfig: Add new defconfigs for 4.14 kernelPhilippe Schenker
No options where added or removed in this commit. A simple make (apalis|colibri)*_defconfig make savedefconfig cp defconfig arch/arm/boot/(apalis|colibri)*_defconfig Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: imx6ull-colibri-aster: Follow pinctrl naming from mainlineMax Krummenacher
While at it, add the dtbs for Aster Carrier Board to the Makefile. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-02-09ARM: dts: imx6ull-colibri: add missing #endifMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-02-09ARM: dts (ds): imx6ull*colibri*: Merge changes from 4.9-2.3.x-imx-nextPhilippe Schenker
In 4.14 devicetress are based on the mainline DT's and only necessary stuff for downstream is put into those devicetrees. This commit holds the changes for imx6ull*colibri* from 4.9. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts (ds): imx6: Merge changes from toradex_4.9-2.3.x-imx-nextPhilippe Schenker
In 4.14 devicetress are based on the mainline DT's and only necessary stuff for downstream is put into those devicetrees. This commit holds the changes for imx6*(colibri|apalis)* from 4.9. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: apalis-imx6: Add mipi_csi nodePhilippe Schenker
This commit adds the mipi_csi node to Toradex's evalboard as found on the mezzanine connector Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: apalis-imx6: Add some example I2C devicesPhilippe Schenker
Those devices are used in conjunction with Toradex's carrier boards. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: colibri-imx6: Add missing pinmuxing to Toradex eval boardPhilippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: imx6: Add touchscreens used on Toradex eval boardsPhilippe Schenker
This commit adds the touchscreens from Toradex so one can enable it. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: add recovery mode for all I2C busesOleksandr Suvorov
- fix the name of pinctrl set for i2c2 recovery mode; - add recovery mode for applicable i2c buses for Apalis/Colibri iMX6Q/D/DL modules. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Related to: #49059 (cherry picked from commit 1501883b4682178e38afc3f08b221f9477fcd7ae)
2020-02-09ARM: dts: imx6: Add sleep state to can interfacesPhilippe Schenker
This patch prepares the devicetree for the new Ixora V1.2 where we are able to turn off the supply of the can transceiver. This implies to use a sleep state on transmission pins in order to prevent backfeeding. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> (cherry picked from commit c1016f5da0dbb8291575949e7f4a417c6306d70a)
2020-02-09ARM: dts: imx6qdl-colibri.dtsi: UHS-I support for v1.1a hwIgor Opaniuk
Provide proper configuration for VGEN3, to make sure it's is always powered which allows that rail to be automatically switched to 1.8 volts for proper UHS-I operation. By default it's disabled. With UHS-I enabled: [ 104.153898] mmc1: new ultra high speed SDR104 SDHC card at address 59b4 [ 104.166202] mmcblk1: mmc1:59b4 USD00 15.0 GiB [ 104.173923] mmcblk1: p1 root@colibri-imx6:~# hdparm -t /dev/mmcblk1 /dev/mmcblk1: Timing buffered disk reads: 226 MB in 3.01 seconds = 75.01 MB/sec Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> (cherry-picked from 7ffa92d64cc7a6331faaae3e2507458461ab90f3)
2020-02-09ARM: dts: imx6qdl-colibri: add phy to fecPhilippe Schenker
Add the phy-node and mdio bus to the fec-node, represented as is on hardware. This commit includes micrel,led-mode that is set to the default value, prepared for someone who wants to change this. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> (cherry-picked from 03ff3610434d89fc8e20b280e1219ce0ebb08935)
2020-02-09ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxcPhilippe Schenker
This adds the muxing for the optional pins usb-oc (overcurrent) and usb-id. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09arm: dts: apalis/colibri qdl: add 3rd pwm parameter to specify pos. neg. logicMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> (cherry picked from commit d1c393ddcb6937b58fa3a9314c8b6f2382b346dc) (cherry picked from commit a9dc775e6796488a3de676e1736d88560d181138)
2020-02-09ARM: dts: apalis/colibri-imx6: Get missing devicetrees from 4.9Philippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: imx6ull-colibri: Add touchscreens used with Eval BoardPhilippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: imx6ull-colibri: Add general wakeup key used on ColibriPhilippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: imx6ull-colibri: reduce v_batt current in power offMax Krummenacher
Reduce the current drawn from VCC_BATT when the main power on the 3V3 pins to the module are switched off. This switches off SoC internal pull resistors which are provided on the module for TAMPER7 and TAMPER9 SoC pin and switches on a pull down instead of a pullup for the USBC_DET module pin (TAMPER2). Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> (cherry picked from commit 9fd59b6eebd12106b5b53fc56466bcd89b9a7ee9) Conflicts: arch/arm/boot/dts/imx6ull-colibri.dtsi Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: imx6ull-colibri: Add watchdogPhilippe Schenker
This patch adds the watchdog to the imx6ull-colibri devicetree Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: imx6ull: improve can templatesMax Krummenacher
Add the pinmuxing and a inactive node for flexcan1 on SODIMM 55/63 and move the inactive flexcan modes to imx6ull-colibri-eval-v3.dtsi where they belong. Note that this commit does not enable flexcan functionality, but rather eases the effort needed to do so. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> (cherry picked from commit 983ff8a6b61e9466beb6b4781fb370a6a7da937a) Conflicts: arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi arch/arm/boot/dts/imx6ull-colibri.dtsi Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com
2020-02-09ARM: dts: imx6ull-colibri: Add sleep mode to fecPhilippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> (cherry picked from commit a6f40c3a1d659467267a9d16355c788524bc5ca7) Conflicts: arch/arm/boot/dts/imx6ull-colibri.dtsi Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: imx6ull-colibri: change touch i2c parametersMax Krummenacher
Switch on 22 kOhm pull ups and lower the I2C frequency to around 40kHz to get a more reliable communication. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-02-09ARM: dts (ds): imx6ull: fix pwm clockMax Krummenacher
All PWM clock instances have their clock gate. Add these consistently. Fixes freezing the kernel when one of these instances is used with IMX6UL_CLK_DUMMY as its clock source. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Stefan Agner <stefan.agner@toradex.com> (cherry picked from commit cd5d7ba49df7918732915a31bfc0f72827bebc2c) (cherry picked from commit c6306e84601b15ee0152625757aab942fa2f2d28)
2020-02-09ARM: dts (ds): imx6ull: include all needed definitionsMax Krummenacher
The file uses linux,keycode = <KEY_POWER>;, so include the header which defines KEY_POWER. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Stefan Agner <stefan.agner@toradex.com> (cherry picked from commit 479e0bae1ddfe3ec527634c241fadae558966323) (cherry picked from commit b8a957b9613a597123f2eb6cd562191362fb153d)
2020-02-09ARM: dts (ds): imx6ull: add support for PWM polarity controlMax Krummenacher
Update #pwm-cells to 3 in order to support PWM signal polarity control. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com> (cherry picked from commit 6863695b931ae31fe20171e75cf8a57c990873be) (cherry picked from commit 3465c49c05258f88ad0584bac8cc6e30d9d1d3a8)
2020-02-09ARM: dts: imx6ull: Add Aster devicetrees from 4.9Philippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: imx6: Pass memory unit-adressFabio Estevam
Pass the memory unit-adress to fix the following build warnings with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name There are cases where dts passes an empty memory node, which will be filled by the bootloader. Passing the memory base address still allows the bootloader to fill the memory size. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-By: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> (cherry picked from commit edc05819786fd5eee330b89bd5892dad1199effc) Conflicts: arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts arch/arm/boot/dts/imx6dl-ts4900.dts arch/arm/boot/dts/imx6dl-ts7970.dts arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts arch/arm/boot/dts/imx6q-h100.dts arch/arm/boot/dts/imx6q-novena.dts arch/arm/boot/dts/imx6q-ts4900.dts arch/arm/boot/dts/imx6q-ts7970.dts arch/arm/boot/dts/imx6q-zii-rdu2.dts arch/arm/boot/dts/imx6qdl-apalis.dtsi arch/arm/boot/dts/imx6qdl-cubox-i.dtsi arch/arm/boot/dts/imx6qdl-hummingboard.dtsi arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi arch/arm/boot/dts/imx6qp-zii-rdu2.dts arch/arm/boot/dts/imx6ul-tx6ul.dtsi arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: imx6ul: Fix memory node duplicationFabio Estevam
Boards based on imx6ul have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx6ul.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> (cherry picked from commit 750d8df6e7b269b828f66631a1d39ea027afc92a)
2020-02-09ARM: dts (ds): Remove ENET1_CRS pinmux as this is used for usb otgPhilippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts (ds): imx7-colibri: Remove regulator linkPhilippe Schenker
This vin-supply statement is not needed as the linked regulator &reg_DCDC3 is anyway marked as always-on. This is needed because NXP's code of GPCV2 can't handle deferred probing. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: Remove fsl,tuning-stepMarcel Ziswiler
As it is anyway default in downstream. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: colibri-imx7: Add mdio phy nodeMarcel Ziswiler
In this commit the mdio bus with the respective phy is added, so one is able to make changes to that easier. This is as well neede for 4.14 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: enable gpmi for the iMX7 eMMC 1GB variantPhilippe Schenker
Enable gpmi part nessesary for Colibri iMX7 Dual 1GB (eMMC). Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-02-09ARM: dts: add UHS-I pinmuxingPhilippe Schenker
The iMX7 is supporting UHS-I but as those pins are shared a define is needed to let the user decide if he wants UHS-I. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-21 20:36:49 +0000