summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2012-04-02x86, tls: Off by one limit checkDan Carpenter
commit 8f0750f19789cf352d7e24a6cc50f2ab1b4f1372 upstream. These are used as offsets into an array of GDT_ENTRY_TLS_ENTRIES members so GDT_ENTRY_TLS_ENTRIES is one past the end of the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: http://lkml.kernel.org/r/20120324075250.GA28258@elgon.mountain Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02x86, tsc: Skip refined tsc calibration on systems with reliable TSCAlok Kataria
commit 57779dc2b3b75bee05ef5d1ada47f615f7a13932 upstream. While running the latest Linux as guest under VMware in highly over-committed situations, we have seen cases when the refined TSC algorithm fails to get a valid tsc_start value in tsc_refine_calibration_work from multiple attempts. As a result the kernel keeps on scheduling the tsc_irqwork task for later. Subsequently after several attempts when it gets a valid start value it goes through the refined calibration and either bails out or uses the new results. Given that the kernel originally read the TSC frequency from the platform, which is the best it can get, I don't think there is much value in refining it. So for systems which get the TSC frequency from the platform we should skip the refined tsc algorithm. We can use the TSC_RELIABLE cpu cap flag to detect this, right now it is set only on VMware and for Moorestown Penwell both of which have there own TSC calibration methods. Signed-off-by: Alok N Kataria <akataria@vmware.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Dirk Brandewie <dirk.brandewie@gmail.com> Cc: Alan Cox <alan@linux.intel.com> [jstultz: Reworked to simply not schedule the refining work, rather then scheduling the work and bombing out later] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02net: bpf_jit: fix BPF_S_LDX_B_MSH compilationEric Dumazet
[ Upstream commit dc72d99dabb870ca5bd6d9fff674be853bb4a88d ] Matt Evans spotted that x86 bpf_jit was incorrectly handling negative constant offsets in BPF_S_LDX_B_MSH instruction. We need to abort JIT compilation like we do in common_load so that filter uses the interpreter code and can call __load_pointer() Reference: http://lists.openwall.net/netdev/2011/07/19/11 Thanks to Indan Zupancic to bring back this issue. Reported-by: Matt Evans <matt@ozlabs.org> Reported-by: Indan Zupancic <indan@nul.nu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02ARM: tegra: select required CPU and L2 errata optionsStephen Warren
commit f35b431dde39fb40944d1024f08d88fbf04a3193 upstream. The ARM IP revisions in Tegra are: Tegra20: CPU r1p1, PL310 r2p0 Tegra30: CPU A01=r2p7/>=A02=r2p9, NEON r2p3-50, PL310 r3p1-50 Based on work by Olof Johansson, although the actual list of errata is somewhat different here, since I added a bunch more and removed one PL310 erratum that doesn't seem applicable. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02x86-32: Fix endless loop when processing signals for kernel tasksDmitry Adamushko
commit 29a2e2836ff9ea65a603c89df217f4198973a74f upstream. The problem occurs on !CONFIG_VM86 kernels [1] when a kernel-mode task returns from a system call with a pending signal. A real-life scenario is a child of 'khelper' returning from a failed kernel_execve() in ____call_usermodehelper() [ kernel/kmod.c ]. kernel_execve() fails due to a pending SIGKILL, which is the result of "kill -9 -1" (at least, busybox's init does it upon reboot). The loop is as follows: * syscall_exit_work: - work_pending: // start_of_the_loop - work_notify_sig: - do_notify_resume() - do_signal() - if (!user_mode(regs)) return; - resume_userspace // TIF_SIGPENDING is still set - work_pending // so we call work_pending => goto // start_of_the_loop More information can be found in another LKML thread: http://www.serverphorums.com/read.php?12,457826 [1] the problem was also seen on MIPS. Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Link: http://lkml.kernel.org/r/1332448765.2299.68.camel@dimm Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02KVM: x86: fix missing checks in syscall emulationStephan Bärwolf
commit c2226fc9e87ba3da060e47333657cd6616652b84 upstream. On hosts without this patch, 32bit guests will crash (and 64bit guests may behave in a wrong way) for example by simply executing following nasm-demo-application: [bits 32] global _start SECTION .text _start: syscall (I tested it with winxp and linux - both always crashed) Disassembly of section .text: 00000000 <_start>: 0: 0f 05 syscall The reason seems a missing "invalid opcode"-trap (int6) for the syscall opcode "0f05", which is not available on Intel CPUs within non-longmodes, as also on some AMD CPUs within legacy-mode. (depending on CPU vendor, MSR_EFER and cpuid) Because previous mentioned OSs may not engage corresponding syscall target-registers (STAR, LSTAR, CSTAR), they remain NULL and (non trapping) syscalls are leading to multiple faults and finally crashs. Depending on the architecture (AMD or Intel) pretended by guests, various checks according to vendor's documentation are implemented to overcome the current issue and behave like the CPUs physical counterparts. [mtosatti: cleanup/beautify code] Signed-off-by: Stephan Baerwolf <stephan.baerwolf@tu-ilmenau.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02KVM: x86: extend "struct x86_emulate_ops" with "get_cpuid"Stephan Bärwolf
commit bdb42f5afebe208eae90406959383856ae2caf2b upstream. In order to be able to proceed checks on CPU-specific properties within the emulator, function "get_cpuid" is introduced. With "get_cpuid" it is possible to virtually call the guests "cpuid"-opcode without changing the VM's context. [mtosatti: cleanup/beautify code] Signed-off-by: Stephan Baerwolf <stephan.baerwolf@tu-ilmenau.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read modeAndrea Arcangeli
commit 1a5a9906d4e8d1976b701f889d8f35d54b928f25 upstream. In some cases it may happen that pmd_none_or_clear_bad() is called with the mmap_sem hold in read mode. In those cases the huge page faults can allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a false positive from pmd_bad() that will not like to see a pmd materializing as trans huge. It's not khugepaged causing the problem, khugepaged holds the mmap_sem in write mode (and all those sites must hold the mmap_sem in read mode to prevent pagetables to go away from under them, during code review it seems vm86 mode on 32bit kernels requires that too unless it's restricted to 1 thread per process or UP builds). The race is only with the huge pagefaults that can convert a pmd_none() into a pmd_trans_huge(). Effectively all these pmd_none_or_clear_bad() sites running with mmap_sem in read mode are somewhat speculative with the page faults, and the result is always undefined when they run simultaneously. This is probably why it wasn't common to run into this. For example if the madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page fault, the hugepage will not be zapped, if the page fault runs first it will be zapped. Altering pmd_bad() not to error out if it finds hugepmds won't be enough to fix this, because zap_pmd_range would then proceed to call zap_pte_range (which would be incorrect if the pmd become a pmd_trans_huge()). The simplest way to fix this is to read the pmd in the local stack (regardless of what we read, no need of actual CPU barriers, only compiler barrier needed), and be sure it is not changing under the code that computes its value. Even if the real pmd is changing under the value we hold on the stack, we don't care. If we actually end up in zap_pte_range it means the pmd was not none already and it was not huge, and it can't become huge from under us (khugepaged locking explained above). All we need is to enforce that there is no way anymore that in a code path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad can run into a hugepmd. The overhead of a barrier() is just a compiler tweak and should not be measurable (I only added it for THP builds). I don't exclude different compiler versions may have prevented the race too by caching the value of *pmd on the stack (that hasn't been verified, but it wouldn't be impossible considering pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines and there's no external function called in between pmd_trans_huge and pmd_none_or_clear_bad). if (pmd_trans_huge(*pmd)) { if (next-addr != HPAGE_PMD_SIZE) { VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem)); split_huge_page_pmd(vma->vm_mm, pmd); } else if (zap_huge_pmd(tlb, vma, pmd, addr)) continue; /* fall through */ } if (pmd_none_or_clear_bad(pmd)) Because this race condition could be exercised without special privileges this was reported in CVE-2012-1179. The race was identified and fully explained by Ulrich who debugged it. I'm quoting his accurate explanation below, for reference. ====== start quote ======= mapcount 0 page_mapcount 1 kernel BUG at mm/huge_memory.c:1384! At some point prior to the panic, a "bad pmd ..." message similar to the following is logged on the console: mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7). The "bad pmd ..." message is logged by pmd_clear_bad() before it clears the page's PMD table entry. 143 void pmd_clear_bad(pmd_t *pmd) 144 { -> 145 pmd_ERROR(*pmd); 146 pmd_clear(pmd); 147 } After the PMD table entry has been cleared, there is an inconsistency between the actual number of PMD table entries that are mapping the page and the page's map count (_mapcount field in struct page). When the page is subsequently reclaimed, __split_huge_page() detects this inconsistency. 1381 if (mapcount != page_mapcount(page)) 1382 printk(KERN_ERR "mapcount %d page_mapcount %d\n", 1383 mapcount, page_mapcount(page)); -> 1384 BUG_ON(mapcount != page_mapcount(page)); The root cause of the problem is a race of two threads in a multithreaded process. Thread B incurs a page fault on a virtual address that has never been accessed (PMD entry is zero) while Thread A is executing an madvise() system call on a virtual address within the same 2 MB (huge page) range. virtual address space .---------------------. | | | | .-|---------------------| | | | | | |<-- B(fault) | | | 2 MB | |/////////////////////|-. huge < |/////////////////////| > A(range) page | |/////////////////////|-' | | | | | | '-|---------------------| | | | | '---------------------' - Thread A is executing an madvise(..., MADV_DONTNEED) system call on the virtual address range "A(range)" shown in the picture. sys_madvise // Acquire the semaphore in shared mode. down_read(&current->mm->mmap_sem) ... madvise_vma switch (behavior) case MADV_DONTNEED: madvise_dontneed zap_page_range unmap_vmas unmap_page_range zap_pud_range zap_pmd_range // // Assume that this huge page has never been accessed. // I.e. content of the PMD entry is zero (not mapped). // if (pmd_trans_huge(*pmd)) { // We don't get here due to the above assumption. } // // Assume that Thread B incurred a page fault and .---------> // sneaks in here as shown below. | // | if (pmd_none_or_clear_bad(pmd)) | { | if (unlikely(pmd_bad(*pmd))) | pmd_clear_bad | { | pmd_ERROR | // Log "bad pmd ..." message here. | pmd_clear | // Clear the page's PMD entry. | // Thread B incremented the map count | // in page_add_new_anon_rmap(), but | // now the page is no longer mapped | // by a PMD entry (-> inconsistency). | } | } | v - Thread B is handling a page fault on virtual address "B(fault)" shown in the picture. ... do_page_fault __do_page_fault // Acquire the semaphore in shared mode. down_read_trylock(&mm->mmap_sem) ... handle_mm_fault if (pmd_none(*pmd) && transparent_hugepage_enabled(vma)) // We get here due to the above assumption (PMD entry is zero). do_huge_pmd_anonymous_page alloc_hugepage_vma // Allocate a new transparent huge page here. ... __do_huge_pmd_anonymous_page ... spin_lock(&mm->page_table_lock) ... page_add_new_anon_rmap // Here we increment the page's map count (starts at -1). atomic_set(&page->_mapcount, 0) set_pmd_at // Here we set the page's PMD entry which will be cleared // when Thread A calls pmd_clear_bad(). ... spin_unlock(&mm->page_table_lock) The mmap_sem does not prevent the race because both threads are acquiring it in shared mode (down_read). Thread B holds the page_table_lock while the page's map count and PMD table entry are updated. However, Thread A does not synchronize on that lock. ====== end quote ======= [akpm@linux-foundation.org: checkpatch fixes] Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Jones <davej@redhat.com> Acked-by: Larry Woodman <lwoodman@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mark Salter <msalter@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02x86/ioapic: Add register level checks to detect bogus io-apic entriesSuresh Siddha
commit 73d63d038ee9f769f5e5b46792d227fe20e442c5 upstream. With the recent changes to clear_IO_APIC_pin() which tries to clear remoteIRR bit explicitly, some of the users started to see "Unable to reset IRR for apic .." messages. Close look shows that these are related to bogus IO-APIC entries which return's all 1's for their io-apic registers. And the above mentioned error messages are benign. But kernel should have ignored such io-apic's in the first place. Check if register 0, 1, 2 of the listed io-apic are all 1's and ignore such io-apic. Reported-by: Álvaro Castillo <midgoon@gmail.com> Tested-by: Jon Dufresne <jon@jondufresne.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: yinghai@kernel.org Cc: kernel-team@fedoraproject.org Cc: Josh Boyer <jwboyer@redhat.com> Link: http://lkml.kernel.org/r/1331577393.31585.94.camel@sbsiddha-desk.sc.intel.com [ Performed minor cleanup of affected code. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-23powerpc/pmac: Fix SMP kernels on pre-core99 UP machinesBenjamin Herrenschmidt
commit 78c5c68a4cf4329d17abfa469345ddf323d4fd62 upstream. The code for "powersurge" SMP would kick in and cause a crash at boot due to the lack of a NULL test. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Reported-by: Adam Conrad <adconrad@ubuntu.com> Tested-by: Adam Conrad <adconrad@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-19sparc32: Add -Av8 to assembler command line.David S. Miller
commit e0adb9902fb338a9fe634c3c2a3e474075c733ba upstream. Newer version of binutils are more strict about specifying the correct options to enable certain classes of instructions. The sparc32 build is done for v7 in order to support sun4c systems which lack hardware integer multiply and divide instructions. So we have to pass -Av8 when building the assembler routines that use these instructions and get patched into the kernel when we find out that we have a v8 capable cpu. Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-19perf/x86: Fix local vs remote memory events for NHM/WSMPeter Zijlstra
commit 87e24f4b67e68d9fd8df16e0bf9c66d1ad2a2533 upstream. Verified using the below proglet.. before: [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 0 remote write Performance counter stats for './numa 0': 2,101,554 node-stores 2,096,931 node-store-misses 5.021546079 seconds time elapsed [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 1 local write Performance counter stats for './numa 1': 501,137 node-stores 199 node-store-misses 5.124451068 seconds time elapsed After: [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 0 remote write Performance counter stats for './numa 0': 2,107,516 node-stores 2,097,187 node-store-misses 5.012755149 seconds time elapsed [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 1 local write Performance counter stats for './numa 1': 2,063,355 node-stores 165 node-store-misses 5.082091494 seconds time elapsed #define _GNU_SOURCE #include <sched.h> #include <stdio.h> #include <errno.h> #include <sys/mman.h> #include <sys/types.h> #include <dirent.h> #include <signal.h> #include <unistd.h> #include <numaif.h> #include <stdlib.h> #define SIZE (32*1024*1024) volatile int done; void sig_done(int sig) { done = 1; } int main(int argc, char **argv) { cpu_set_t *mask, *mask2; size_t size; int i, err, t; int nrcpus = 1024; char *mem; unsigned long nodemask = 0x01; /* node 0 */ DIR *node; struct dirent *de; int read = 0; int local = 0; if (argc < 2) { printf("usage: %s [0-3]\n", argv[0]); printf(" bit0 - local/remote\n"); printf(" bit1 - read/write\n"); exit(0); } switch (atoi(argv[1])) { case 0: printf("remote write\n"); break; case 1: printf("local write\n"); local = 1; break; case 2: printf("remote read\n"); read = 1; break; case 3: printf("local read\n"); local = 1; read = 1; break; } mask = CPU_ALLOC(nrcpus); size = CPU_ALLOC_SIZE(nrcpus); CPU_ZERO_S(size, mask); node = opendir("/sys/devices/system/node/node0/"); if (!node) perror("opendir"); while ((de = readdir(node))) { int cpu; if (sscanf(de->d_name, "cpu%d", &cpu) == 1) CPU_SET_S(cpu, size, mask); } closedir(node); mask2 = CPU_ALLOC(nrcpus); CPU_ZERO_S(size, mask2); for (i = 0; i < size; i++) CPU_SET_S(i, size, mask2); CPU_XOR_S(size, mask2, mask2, mask); // invert if (!local) mask = mask2; err = sched_setaffinity(0, size, mask); if (err) perror("sched_setaffinity"); mem = mmap(0, SIZE, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); err = mbind(mem, SIZE, MPOL_BIND, &nodemask, 8*sizeof(nodemask), MPOL_MF_MOVE); if (err) perror("mbind"); signal(SIGALRM, sig_done); alarm(5); if (!read) { while (!done) { for (i = 0; i < SIZE; i++) mem[i] = 0x01; } } else { while (!done) { for (i = 0; i < SIZE; i++) t += *(volatile char *)(mem + i); } } return 0; } Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-tq73sxus35xmqpojf7ootxgs@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-19x86: Derandom delay_tsc for 64 bitThomas Gleixner
commit a7f4255f906f60f72e00aad2fb000939449ff32e upstream. Commit f0fbf0abc093 ("x86: integrate delay functions") converted delay_tsc() into a random delay generator for 64 bit. The reason is that it merged the mostly identical versions of delay_32.c and delay_64.c. Though the subtle difference of the result was: static void delay_tsc(unsigned long loops) { - unsigned bclock, now; + unsigned long bclock, now; Now the function uses rdtscl() which returns the lower 32bit of the TSC. On 32bit that's not problematic as unsigned long is 32bit. On 64 bit this fails when the lower 32bit are close to wrap around when bclock is read, because the following check if ((now - bclock) >= loops) break; evaluated to true on 64bit for e.g. bclock = 0xffffffff and now = 0 because the unsigned long (now - bclock) of these values results in 0xffffffff00000001 which is definitely larger than the loops value. That explains Tvortkos observation: "Because I am seeing udelay(500) (_occasionally_) being short, and that by delaying for some duration between 0us (yep) and 491us." Make those variables explicitely u32 again, so this works for both 32 and 64 bit. Reported-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: OMAP: fix iommu, not mailboxOhad Ben-Cohen
commit 134d12fae0bb8f3d60dc7440a9e1950bb5427167 upstream. For some weird (freudian?) reason, commit 435792d "ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp" unintentionally changed the mailbox's initcall instead of the iommu's. Fix that. Reported-by: Fernando Guzman Lugo <fernando.lugo@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Joerg Roedel <Joerg.Roedel@amd.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: 7357/1: perf: fix overflow handling for xscale2 PMUsWill Deacon
commit 3f31ae121348afd9ed39700ea2a63c17cd7eeed1 upstream. xscale2 PMUs indicate overflow not via the PMU control register, but by a separate overflow FLAG register instead. This patch fixes the xscale2 PMU code to use this register to detect to overflow and ensures that we clear any pending overflow when disabling a counter. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: 7356/1: perf: check that we have an event in the PMU IRQ handlersWill Deacon
commit f6f5a30c834135c9f2fa10400c59ebbdd9188567 upstream. The PMU IRQ handlers in perf assume that if a counter has overflowed then perf must be responsible. In the paranoid world of crazy hardware, this could be false, so check that we do have a valid event before attempting to dereference NULL in the interrupt path. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: 7355/1: perf: clear overflow flag when disabling counter on ARMv7 PMUWill Deacon
commit 99c1745b9c76910e195889044f914b4898b7c9a5 upstream. When disabling a counter on an ARMv7 PMU, we should also clear the overflow flag in case an overflow occurred whilst stopping the counter. This prevents a spurious overflow being picked up later and leading to either false accounting or a NULL dereference. Reported-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: 7354/1: perf: limit sample_period to half max_period in non-sampling modeWill Deacon
commit 5727347180ebc6b4a866fcbe00dcb39cc03acb37 upstream. On ARM, the PMU does not stop counting after an overflow and therefore IRQ latency affects the new counter value read by the kernel. This is significant for non-sampling runs where it is possible for the new value to overtake the previous one, causing the delta to be out by up to max_period events. Commit a737823d ("ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency") attempted to fix this problem by allowing interrupt handlers to pass an overflow flag to the event update function, causing the overflow calculation to assume that the counter passed through zero when going from prev to new. Unfortunately, this doesn't work when overflow occurs on the perf_task_tick path because we have the flag cleared and end up computing a large negative delta. This patch removes the overflow flag from armpmu_event_update and instead limits the sample_period to half of the max_period for non-sampling profiling runs. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: 7345/1: errata: update workaround for A9 erratum #743622Will Deacon
commit efbc74ace95338484f8d732037b99c7c77098fce upstream. Erratum #743622 affects all r2 variants of the Cortex-A9 processor, so ensure that the workaround is applied regardless of the revision. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAPDSS: HDMI: PHY burnout fixTomi Valkeinen
commit c49d005b6cc8491fad5b24f82805be2d6bcbd3dd upstream. A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board if the HDMI PHY is kept powered on when the cable is not connected. This patch solves the problem by adding hot-plug-detection into the HDMI IP driver. This is not a real HPD support in the sense that nobody else than the IP driver gets to know about the HPD events, but is only meant to fix the HW bug. The strategy is simple: If the display device is turned off by the user, the PHY power is set to OFF. When the display device is turned on by the user, the PHY power is set either to LDOON or TXON, depending on whether the HDMI cable is connected. The reason to avoid PHY OFF when the display device is on, but the cable is disconnected, is that when the PHY is turned OFF, the HDMI IP is not "ticking" and thus the DISPC does not receive pixel clock from the HDMI IP. This would, for example, prevent any VSYNCs from happening, and would thus affect the users of omapdss. By using LDOON when the cable is disconnected we'll avoid the HW bug, but keep the HDMI working as usual from the user's point of view. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAP: 4430SDP/Panda: add HDMI HPD gpioTomi Valkeinen
commit aa74274b464d4aa24703963ac89a0ee942d5d267 upstream. Both Panda and 4430SDP use GPIO 63 as HDMI hot-plug-detect. Configure this GPIO in the board files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAP: 4430SDP/Panda: setup HDMI GPIO muxesTomi Valkeinen
commit 78a1ad8f12db70b8b0a4548b90704de08ee216ce upstream. The HDMI GPIO pins LS_OE and CT_CP_HPD are not currently configured. This patch configures them as output pins. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAPDSS: remove wrong HDMI HPD muxingTomi Valkeinen
commit 7bb122d155f742fe2d79849090c825be7b4a247e upstream. "hdmi_hpd" pin is muxed to INPUT and PULLUP, but the pin is not currently used, and in the future when it is used, the pin is used as a GPIO and is board specific, not an OMAP4 wide thing. So remove the muxing for now. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPDTomi Valkeinen
commit 3932a32fcf5393f8be70ac99dc718ad7ad0a415b upstream. The GPIO 60 on 4430sdp and Panda is not HPD GPIO, as currently marked in the board files, but CT_CP_HPD, which is used to enable/disable HPD functionality. This patch renames the GPIO. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpiosTomi Valkeinen
commit 575753e3bea3b67eef8e454fb87f719e3f7da599 upstream. Instead of freeing the GPIOs individually, use gpio_free_array(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: orion: Fix Orion5x GPIO regression from MPP cleanupAndrew Lunn
commit b06540371063f0f07aafc1d1ac5e974da85c973c upstream. Patchset "ARM: orion: Refactor the MPP code common in the orion platform" broke at least Orion5x based platforms. These platforms have pins configured as GPIO when the selector is not 0x0. However the common code assumes the selector is always 0x0 for a GPIO lines. It then ignores the GPIO bits in the MPP definitions, resulting in that Orion5x machines cannot correctly configure there GPIO lines. The Fix removes the assumption that the selector is always 0x0. In order that none GPIO configurations are correctly blocked, Kirkwood and mv78xx0 MPP definitions are corrected to only set the GPIO bits for GPIO configurations. This third version, which does not contain any whitespace changes, and is rebased on v3.3-rc2. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-12ARM: orion: Fix USB phy for orion5x.Andrew Lunn
commit 72053353583230952c4b187e110e9da00dfc3afb upstream. The patch "ARM: orion: Consolidate USB platform setup code.", commit 4fcd3f374a928081d391cd9a570afe3b2c692fdc broke USB on TS-7800 and other orion5x boards, because the wrong type of PHY was being passed to the EHCI driver in the platform data. Orion5x needs EHCI_PHY_ORION and all the others want EHCI_PHY_NA. Allow the mach- code to tell the generic plat-orion code which USB PHY enum to place into the platform data. Version 2: Rebase to v3.3-rc2. Reported-by: Ambroz Bizjak <ambrop7@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Ambroz Bizjak <ambrop7@gmail.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12avr32: select generic atomic64_t supportFabio Baltieri
commit 31e0017e6f6fb5cfdfaf932c1f98c9bef8d57688 upstream. Enable use of the generic atomic64 implementation on AVR32 platforms. Without this the kernel fails to build as the architecture does not provide its version. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12alpha: fix 32/64-bit bug in futex supportAndrew Morton
commit 62aca403657fe30e5235c5331e9871e676d9ea0a upstream. Michael Cree said: : : I have noticed some user space problems (pulseaudio crashes in pthread : : code, glibc/nptl test suite failures, java compiler freezes on SMP alpha : : systems) that arise when using a 2.6.39 or later kernel on Alpha. : : Bisecting between 2.6.38 and 2.6.39 (using glibc/nptl test suite as : : criterion for good/bad kernel) eventually leads to: : : : : 8d7718aa082aaf30a0b4989e1f04858952f941bc is the first bad commit : : commit 8d7718aa082aaf30a0b4989e1f04858952f941bc : : Author: Michel Lespinasse <walken@google.com> : : Date: Thu Mar 10 18:50:58 2011 -0800 : : : : futex: Sanitize futex ops argument types : : : : Change futex_atomic_op_inuser and futex_atomic_cmpxchg_inatomic : : prototypes to use u32 types for the futex as this is the data type the : : futex core code uses all over the place. : : : : Looking at the commit I see there is a change of the uaddr argument in : : the Alpha architecture specific code for futexes from int to u32, but I : : don't see why this should cause a problem. Richard Henderson said: : futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, : u32 oldval, u32 newval) : ... : : "r"(uaddr), "r"((long)oldval), "r"(newval) : : : There is no 32-bit compare instruction. These are implemented by : consistently extending the values to a 64-bit type. Since the : load instruction sign-extends, we want to sign-extend the other : quantity as well (despite the fact it's logically unsigned). : : So: : : - : "r"(uaddr), "r"((long)oldval), "r"(newval) : + : "r"(uaddr), "r"((long)(int)oldval), "r"(newval) : : should do the trick. Michael said: : This fixes the glibc test suite failures and the pulseaudio related : crashes, but it does not fix the java compiiler lockups that I was (and : are still) observing. That is some other problem. Reported-by: Michael Cree <mcree@orcon.net.nz> Tested-by: Michael Cree <mcree@orcon.net.nz> Acked-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Michel Lespinasse <walken@google.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: S3C24XX: DMA resume regression fixGusakov Andrey
commit e39d40c65dfd8390b50c03482ae9e289b8a8f351 upstream. s3c2410_dma_suspend suspends channels from 0 to dma_channels. s3c2410_dma_resume resumes channels in reverse order. So pointer should be decremented instead of being incremented. Signed-off-by: Gusakov Andrey <dron0gus@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabledJoerg Roedel
commit 1018faa6cf23b256bf25919ef203cd7c129f06f2 upstream. It turned out that a performance counter on AMD does not count at all when the GO or HO bit is set in the control register and SVM is disabled in EFER. This patch works around this issue by masking out the HO bit in the performance counter control register when SVM is not enabled. The GO bit is not touched because it is only set when the user wants to count in guest-mode only. So when SVM is disabled the counter should not run at all and the not-counting is the intended behaviour. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Avi Kivity <avi@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Robert Richter <robert.richter@amd.com> Link: http://lkml.kernel.org/r/1330523852-19566-1-git-send-email-joerg.roedel@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12S390: KEYS: Enable the compat keyctl wrapper on s390xDavid Howells
commit 1d057720609ed052a6371fe1d53300e5e6328e94 upstream. Enable the compat keyctl wrapper on s390x so that 32-bit s390 userspace can call the keyctl() syscall. There's an s390x assembly wrapper that truncates all the register values to 32-bits and this then calls compat_sys_keyctl() - but the latter only exists if CONFIG_KEYS_COMPAT is enabled, and the s390 Kconfig doesn't enable it. Without this patch, 32-bit calls to the keyctl() syscall are given an ENOSYS error: [root@devel4 ~]# keyctl show Session Keyring -3: key inaccessible (Function not implemented) Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: dan@danny.cz Cc: Carsten Otte <cotte@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: LPC32xx: Fix irq on GPI_28Roland Stigge
commit f6737055c1c432a9628a9a731f9881ad8e0a9eee upstream. The GPI_28 IRQ was not registered properly. The registration of IRQ_LPC32XX_GPI_28 was added and the (wrong) IRQ_LPC32XX_GPI_11 at LPC32XX_SIC1_IRQ(4) was replaced by IRQ_LPC32XX_GPI_28 (see manual of LPC32xx / interrupt controller). Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: LPC32xx: Fix interrupt controller initRoland Stigge
commit 35dd0a75d4a382e7f769dd0277732e7aa5235718 upstream. This patch fixes the initialization of the interrupt controller of the LPC32xx by correctly setting up SIC1 and SIC2 instead of (wrongly) using the same value as for the Main Interrupt Controller (MIC). Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: LPC32xx: irq.c: Clear latched eventRoland Stigge
commit 94ed7830cba4dce57b18a2926b5d826bfd184bd6 upstream. This patch fixes the wakeup disable function by clearing latched events. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: LPC32xx: serial.c: Fixed loop limitRoland Stigge
commit ff424aa4c89d19082e8ae5a3351006bc8a4cd91b upstream. This patch fixes a wrong loop limit on UART init. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: LPC32xx: serial.c: HW bug workaroundRoland Stigge
commit 2707208ee8a80dbbd5426f5aa1a934f766825bb5 upstream. This patch fixes a HW bug by flushing RX FIFOs of the UARTs on init. It was ported from NXP's git.lpclinux.com tree. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12compat: fix compile breakage on s390Heiko Carstens
commit 048cd4e51d24ebf7f3552226d03c769d6ad91658 upstream. The new is_compat_task() define for the !COMPAT case in include/linux/compat.h conflicts with a similar define in arch/s390/include/asm/compat.h. This is the minimal patch which fixes the build issues. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: OMAP: make iommu subsys_initcall to fix builtin omap3ispOhad Ben-Cohen
commit 435792d93410f008120c4dbab148019a3cc31dbc upstream. omap3isp depends on omap's iommu and will fail to probe if initialized before it (which always happen if they are builtin). Make omap's iommu subsys_initcall as an interim solution until the probe deferral mechanism is merged. Reported-by: James <angweiyang@gmail.com> Debugged-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Hiroshi Doyu <hdoyu@nvidia.com> Cc: Joerg Roedel <Joerg.Roedel@amd.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29x86/amd: Fix L1i and L2 cache sharing information for AMD family 15h processorsAndreas Herrmann
commit 32c3233885eb10ac9cb9410f2f8cd64b8df2b2a1 upstream. For L1 instruction cache and L2 cache the shared CPU information is wrong. On current AMD family 15h CPUs those caches are shared between both cores of a compute unit. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=42607 Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Petkov Borislav <Borislav.Petkov@amd.com> Cc: Dave Jones <davej@redhat.com> Link: http://lkml.kernel.org/r/20120208195229.GA17523@alberich.amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29ARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not foundRussell King
commit d980e0f8d858c6963d676013e976ff00ab7acb2b upstream. When the PMIC is not found, voltdm->pmic will be NULL. vp.c's initialization function tries to dereferences this, which causes an oops: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (3.3.0-rc2+ #204) PC is at omap_vp_init+0x5c/0x15c LR is at omap_vp_init+0x58/0x15c pc : [<c03db880>] lr : [<c03db87c>] psr: 60000013 sp : c181ff30 ip : c181ff68 fp : c181ff64 r10: c0407808 r9 : c040786c r8 : c0407814 r7 : c0026868 r6 : c00264fc r5 : c040ad6c r4 : 00000000 r3 : 00000040 r2 : 000032c8 r1 : 0000fa00 r0 : 000032c8 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xc181e2e8) Stack: (0xc181ff30 to 0xc1820000) ff20: c0381d00 c02e9c6d c0383582 c040786c ff40: c040ad6c c00264fc c0026868 c0407814 00000000 c03d9de4 c181ff8c c181ff68 ff60: c03db448 c03db830 c02e982c c03fdfb8 c03fe004 c0039988 00000013 00000000 ff80: c181ff9c c181ff90 c03d9df8 c03db390 c181ffdc c181ffa0 c0008798 c03d9df0 ffa0: c181ffc4 c181ffb0 c0055a44 c0187050 c0039988 c03fdfb8 c03fe004 c0039988 ffc0: 00000013 00000000 00000000 00000000 c181fff4 c181ffe0 c03d1284 c0008708 ffe0: 00000000 c03d1208 00000000 c181fff8 c0039988 c03d1214 1077ce40 01f7ee08 Backtrace: [<c03db824>] (omap_vp_init+0x0/0x15c) from [<c03db448>] (omap_voltage_late_init+0xc4/0xfc) [<c03db384>] (omap_voltage_late_init+0x0/0xfc) from [<c03d9df8>] (omap2_common_pm_late_init+0x14/0x54) r8:00000000 r7:00000013 r6:c0039988 r5:c03fe004 r4:c03fdfb8 [<c03d9de4>] (omap2_common_pm_late_init+0x0/0x54) from [<c0008798>] (do_one_initcall+0x9c/0x164) [<c00086fc>] (do_one_initcall+0x0/0x164) from [<c03d1284>] (kernel_init+0x7c/0x120) [<c03d1208>] (kernel_init+0x0/0x120) from [<c0039988>] (do_exit+0x0/0x2cc) r5:c03d1208 r4:00000000 Code: e5ca300b e5900034 ebf69027 e5994024 (e5941000) ---[ end trace aed617dddaf32c3d ]--- Kernel panic - not syncing: Attempted to kill init! Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29ARM: 7325/1: fix v7 boot with lockdep enabledRabin Vincent
commit 8e43a905dd574f54c5715d978318290ceafbe275 upstream. Bootup with lockdep enabled has been broken on v7 since b46c0f74657d ("ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR"). This is because v7_setup (which is called very early during boot) calls v7_flush_dcache_all, and the save_and_disable_irqs added by that patch ends up attempting to call into lockdep C code (trace_hardirqs_off()) when we are in no position to execute it (no stack, MMU off). Fix this by using a notrace variant of save_and_disable_irqs. The code already uses the notrace variant of restore_irqs. Reviewed-by: Nicolas Pitre <nico@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDRStephen Boyd
commit b46c0f74657d1fe1c1b0c1452631cc38a9e6987f upstream. armv7's flush_cache_all() flushes caches via set/way. To determine the cache attributes (line size, number of sets, etc.) the assembly first writes the CSSELR register to select a cache level and then reads the CCSIDR register. The CSSELR register is banked per-cpu and is used to determine which cache level CCSIDR reads. If the task is migrated between when the CSSELR is written and the CCSIDR is read the CCSIDR value may be for an unexpected cache level (for example L1 instead of L2) and incorrect cache flushing could occur. Disable interrupts across the write and read so that the correct cache attributes are read and used for the cache flushing routine. We disable interrupts instead of disabling preemption because the critical section is only 3 instructions and we want to call v7_dcache_flush_all from __v7_setup which doesn't have a full kernel stack with a struct thread_info. This fixes a problem we see in scm_call() when flush_cache_all() is called from preemptible context and sometimes the L2 cache is not properly flushed out. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29ARM: 7326/2: PL330: fix null pointer dereference in pl330_chan_ctrl()Javi Merino
commit 46e33c606af8e0caeeca374103189663d877c0d6 upstream. This fixes the thrd->req_running field being accessed before thrd is checked for null. The error was introduced in abb959f: ARM: 7237/1: PL330: Fix driver freeze Reference: <1326458191-23492-1-git-send-email-mans.rullgard@linaro.org> Signed-off-by: Mans Rullgard <mans.rullgard@linaro.org> Acked-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29S390: correct ktime to tod clock comparator conversionMartin Schwidefsky
commit cf1eb40f8f5ea12c9e569e7282161fc7f194fd62 upstream. The conversion of the ktime to a value suitable for the clock comparator does not take changes to wall_to_monotonic into account. In fact the conversion just needs the boot clock (sched_clock_base_cc) and the total_sleep_time. This is applicable to 3.2+ kernels. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29ARM: at91: USB AT91 gadget registration for moduleNicolas Ferre
commit e8c9dc93e27d891636defbc269f182a83e6abba8 upstream. Registration of at91_udc as a module will enable SoC related code. Fix following an idea from Karel Znamenacek. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Karel Znamenacek <karel@ryston.cz> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29powerpc/perf: power_pmu_start restores incorrect values, breaking frequency ↵Anton Blanchard
events commit 9a45a9407c69d068500923480884661e2b9cc421 upstream. perf on POWER stopped working after commit e050e3f0a71b (perf: Fix broken interrupt rate throttling). That patch exposed a bug in the POWER perf_events code. Since the PMCs count upwards and take an exception when the top bit is set, we want to write 0x80000000 - left in power_pmu_start. We were instead programming in left which effectively disables the counter until we eventually hit 0x80000000. This could take seconds or longer. With the patch applied I get the expected number of samples: SAMPLE events: 9948 Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-27i387: re-introduce FPU state preloading at context switch timeLinus Torvalds
commit 34ddc81a230b15c0e345b6b253049db731499f7e upstream. After all the FPU state cleanups and finally finding the problem that caused all our FPU save/restore problems, this re-introduces the preloading of FPU state that was removed in commit b3b0870ef3ff ("i387: do not preload FPU state at task switch time"). However, instead of simply reverting the removal, this reimplements preloading with several fixes, most notably - properly abstracted as a true FPU state switch, rather than as open-coded save and restore with various hacks. In particular, implementing it as a proper FPU state switch allows us to optimize the CR0.TS flag accesses: there is no reason to set the TS bit only to then almost immediately clear it again. CR0 accesses are quite slow and expensive, don't flip the bit back and forth for no good reason. - Make sure that the same model works for both x86-32 and x86-64, so that there are no gratuitous differences between the two due to the way they save and restore segment state differently due to architectural differences that really don't matter to the FPU state. - Avoid exposing the "preload" state to the context switch routines, and in particular allow the concept of lazy state restore: if nothing else has used the FPU in the meantime, and the process is still on the same CPU, we can avoid restoring state from memory entirely, just re-expose the state that is still in the FPU unit. That optimized lazy restore isn't actually implemented here, but the infrastructure is set up for it. Of course, older CPU's that use 'fnsave' to save the state cannot take advantage of this, since the state saving also trashes the state. In other words, there is now an actual _design_ to the FPU state saving, rather than just random historical baggage. Hopefully it's easier to follow as a result. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-27i387: move TS_USEDFPU flag from thread_info to task_structLinus Torvalds
commit f94edacf998516ac9d849f7bc6949a703977a7f3 upstream. This moves the bit that indicates whether a thread has ownership of the FPU from the TS_USEDFPU bit in thread_info->status to a word of its own (called 'has_fpu') in task_struct->thread.has_fpu. This fixes two independent bugs at the same time: - changing 'thread_info->status' from the scheduler causes nasty problems for the other users of that variable, since it is defined to be thread-synchronous (that's what the "TS_" part of the naming was supposed to indicate). So perfectly valid code could (and did) do ti->status |= TS_RESTORE_SIGMASK; and the compiler was free to do that as separate load, or and store instructions. Which can cause problems with preemption, since a task switch could happen in between, and change the TS_USEDFPU bit. The change to TS_USEDFPU would be overwritten by the final store. In practice, this seldom happened, though, because the 'status' field was seldom used more than once, so gcc would generally tend to generate code that used a read-modify-write instruction and thus happened to avoid this problem - RMW instructions are naturally low fat and preemption-safe. - On x86-32, the current_thread_info() pointer would, during interrupts and softirqs, point to a *copy* of the real thread_info, because x86-32 uses %esp to calculate the thread_info address, and thus the separate irq (and softirq) stacks would cause these kinds of odd thread_info copy aliases. This is normally not a problem, since interrupts aren't supposed to look at thread information anyway (what thread is running at interrupt time really isn't very well-defined), but it confused the heck out of irq_fpu_usable() and the code that tried to squirrel away the FPU state. (It also caused untold confusion for us poor kernel developers). It also turns out that using 'task_struct' is actually much more natural for most of the call sites that care about the FPU state, since they tend to work with the task struct for other reasons anyway (ie scheduling). And the FPU data that we are going to save/restore is found there too. Thanks to Arjan Van De Ven <arjan@linux.intel.com> for pointing us to the %esp issue. Cc: Arjan van de Ven <arjan@linux.intel.com> Reported-and-tested-by: Raphael Prevost <raphael@buro.asia> Acked-and-tested-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-27i387: move AMD K7/K8 fpu fxsave/fxrstor workaround from save to restoreLinus Torvalds
commit 4903062b5485f0e2c286a23b44c9b59d9b017d53 upstream. The AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception is pending. In order to not leak FIP state from one process to another, we need to do a floating point load after the fxsave of the old process, and before the fxrstor of the new FPU state. That resets the state to the (uninteresting) kernel load, rather than some potentially sensitive user information. We used to do this directly after the FPU state save, but that is actually very inconvenient, since it (a) corrupts what is potentially perfectly good FPU state that we might want to lazy avoid restoring later and (b) on x86-64 it resulted in a very annoying ordering constraint, where "__unlazy_fpu()" in the task switch needs to be delayed until after the DS segment has been reloaded just to get the new DS value. Coupling it to the fxrstor instead of the fxsave automatically avoids both of these issues, and also ensures that we only do it when actually necessary (the FP state after a save may never actually get used). It's simply a much more natural place for the leaked state cleanup. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-04 11:31:20 +0000