summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Expand)Author
2011-02-03ENGR00138024-2 Update mx5x board file to use u64-bit iomuxDinh Nguyen
2011-02-03ENGR00138024-1 Add full IOMUX support for MX53 and MX51Dinh Nguyen
2011-02-03ARM i.MX51: Full iomux supportSascha Hauer
2011-02-03MXC IOMUX-V3 replace struct pad_desc with bitmapped cookie (step 2)Lothar Waßmann
2011-02-03imx: fix iomux v3Arnaud Patard (Rtp)
2011-02-03ARM: i.MX IOMUX-V3 replace struct pad_desc with bitmapped cookieLothar Waßmann
2011-02-03ENGR00138121 Fix system hangs when arecord/aplay continuouslyZeng Zhaoming
2011-02-03ENGR00138540 mx51: set low bus flag after entering low bus modeLily Zhang
2011-02-03ENGR00138528 MX53 loco&smd:preset suspend voltage in the latest stageZhou Jingyu
2011-02-03ENGR00138516: MX5X: Initialize CPU working point correctly for DVFS-CORERanjani Vaidyanathan
2011-02-03ENGR00138479 Restructure MX53 bus frequecy driverZhou Jingyu
2011-02-03ENGR00138425 MX53 LOCO/SMD: Only preset voltage for suspend to mem modeZhou Jingyu
2011-02-03ENGR00138217 mx53: use arm_podf to switch cpu frequencyLily Zhang
2011-02-03ENGR00138201 MX53_SMD: BT: add delay after BT chip resetZhang Jiejing
2011-02-03ENGR00138211 mx5: don't allow to enter low bus if only have 1 WPLily Zhang
2011-02-03ENGR00138213-2 Add da9053 power key to mx53 smd &locoZhou Jingyu
2011-02-03ENGR00138130-2 MX53_ARD: add max11801 touch device.Zhang Jiejing
2011-02-03ENGR00138138 Add workaround to fix irq wakeup for mx53 smd &locoZhou Jingyu
2011-02-03ENGR00138115-2 MX53 SMD:Add TVDAC regulator for TVE pdataLiu Ying
2011-02-03ENGR00137979-2 [MX50]add performance monitor driverTony Lin
2011-02-03ENGR00137979-1 [MX28]add performance monitor driverTony Lin
2011-02-03ENGR00138050 mx53 smd: enable WiFi power during system boot upAisheng.Dong
2011-02-03ENGR00138071-1 MX53_SMD: mpr121: adjust key order per hardware design.Zhang Jiejing
2011-02-03ENGR00137992 MX53 LOCO:Add Seiko WVGA LCD panel supportLiu Ying
2011-02-03ENGR00138060 MX53 SMD:Change to use OV3640 defaultlyLiu Ying
2011-02-03ENGR00137991-1 MSL mxc edid: add cea ext block parserJason Chen
2011-02-03ENGR00138037 mx53: use round_rate to set asrc serial clkLily Zhang
2011-02-03ENGR00136874-2 mx5x: update the power key platform dataXinyu Chen
2011-02-03ENGR00137958-2 Add mx53 smd&loco suspend via i2c commandZhou Jingyu
2011-02-03ENGR00138032 MX53 TO2: Add DVFS support for 1GHZLily Zhang
2011-02-03ENGR00137983 MX53: Update CPU working pointsLily Zhang
2011-02-03ENGR00137924-2: MX50EVK: Improve board level suspend mode power.Ranjani Vaidyanathan
2011-02-03ENGR00137924-1: Added API to read IOMUX settingsRanjani Vaidyanathan
2011-02-03ENGR00137973 MX53_TO2: DVFS core caused system hangNancy Chen
2011-02-03ENGR00137946 mx53 smd: add power off supportLily Zhang
2011-02-03ENGR00137936 MX53_SMD/LOCO Add GPIO keys.Zhang Jiejing
2011-02-03ENGR00137844 MX53: update MFG defconfigLily Zhang
2011-02-03ENGR00137927-2 mx5x_msl_usb: re-organize the platform data for device and hostPeter Chen
2011-02-03ENGR00137927-1 mx28_msl_usb: re-organize the platform data for device and hostPeter Chen
2011-02-03ENGR00137932 SATA AHCI Built in SATA driverRichard Zhu
2011-02-03ENGR00137489 mx50 rdp: specify the regulator in esdhc2 platform dataAisheng.Dong
2011-02-03ENGR00137872-2 mx5x_msl: move wakeup handle from driver to MSLPeter Chen
2011-02-03ENGR00137872-1 mx28_msl: move wakeup handle from driver to MSLPeter Chen
2011-02-03ENGR00137721 SATA AHCI fix the return value in the driverRichard Zhu
2011-02-03ENGR00137777 Enable MMA8450 accelerator support for i.mx50 evkSammy He
2011-02-03ENGR00137762-1 usb: debounce vbus and id value for all usb modePeter Chen
2011-02-03ARM: mx51: dynamically register imx-uart devicesUwe Kleine-König
2011-02-03ARM: imx: change the way imx-uarts are registeredUwe Kleine-König
2011-02-03ENGR00137500-4 MX5 defconfig:Build OV5640/OV5642 camera as moduleLiu Ying
2011-02-03ENGR00137500-3 MX53 SMD:Support OV5640 cameraLiu Ying
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-28 17:22:43 +0000