summaryrefslogtreecommitdiff
path: root/drivers/devfreq
AgeCommit message (Collapse)Author
2012-03-27Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: global cleanups" from Arnd Bergmann: "Quite a bit of code gets removed, and some stuff moved around, mostly the old samsung s3c24xx stuff. There should be no functional changes in this series otherwise. Some cleanups have dependencies on other arm-soc branches and will be sent in the second round. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up trivial conflicts mainly due to #include's being changes on both sides. * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits) ep93xx: Remove unnecessary includes of ep93xx-regs.h ep93xx: Move EP93XX_SYSCON defines to SoC private header ep93xx: Move crunch code to mach-ep93xx directory ep93xx: Make syscon access functions private to SoC ep93xx: Configure GPIO ports in core code ep93xx: Move peripheral defines to local SoC header ep93xx: Convert the watchdog driver into a platform device. ep93xx: Use ioremap for backlight driver ep93xx: Move GPIO defines to gpio-ep93xx.h ep93xx: Don't use system controller defines in audio drivers ep93xx: Move PHYS_BASE defines to local SoC header file ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver ARM: EXYNOS: add clock registers for exynos4x12-cpufreq PM / devfreq: update the name of EXYNOS clock registers that were omitted PM / devfreq: update the name of EXYNOS clock register ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock ARM: EXYNOS: use static declaration on regarding clock ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs ARM: OMAP2+: Fix build error after merge ARM: S3C24XX: remove call to s3c24xx_setup_clocks ...
2012-03-17PM / devfreq: add relation of recommended frequency.MyungJoo Ham
The semantics of "target frequency" given to devfreq driver from devfreq framework has always been interpretted as "at least" or GLB (greatest lower bound). However, the framework might want the device driver to limit its max frequency (LUB: least upper bound), especially if it is given by thermal framework (it's too hot). Thus, the target fuction should have another parameter to express whether the framework wants GLB or LUB. And, the additional parameter, "u32 flags", does it. With the update, devfreq_recommended_opp() is also updated. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-03-10PM / devfreq: update the name of EXYNOS clock registers that were omittedMyungJoo Ham
In the commit, "PM / devfreq: update the name of EXYNOS clock register" ommitted one register. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-10PM / devfreq: update the name of EXYNOS clock registerKukjin Kim
According to replacing the name of EXYNOS clock registers, this patch updates exynos4_bus.c file where it is used. Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-20PM / devfreq: add min/max_freq limit requested by users.MyungJoo Ham
The frequency requested to devfreq device driver from devfreq governors is restricted by min_freq and max_freq input. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-01-20devfreq: Remove MODULE_ALIAS for exynos4 busfreq driverAxel Lin
This driver can only be built-in, it does not make sense to add modalias for it (in addition to being incorrect, the platform modalias needs to be prefixed with "platform:"). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2012-01-20devfreq: exynos4_bus: Use dev_get_drvdata at appropriate placesAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2011-12-21Merge branch 'devfreq-for-next' of ↵Rafael J. Wysocki
git://git.infradead.org/users/kmpark/linux-samsung into pm-devfreq * 'devfreq-for-next' of git://git.infradead.org/users/kmpark/linux-samsung: (765 commits) PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. pci: Fix hotplug of Express Module with pci bridges i2c-eg20t: correct the driver init order of pch_i2c_probe() I2C: OMAP: fix FIFO usage for OMAP4 i2c-s3c2410: Fix return code of s3c24xx_i2c_parse_dt_gpio i2c: i2c-s3c2410: Add a cpu_relax() to busy wait for bus idle Linux 3.2-rc6 Revert "drm/i915: fix infinite recursion on unbind due to ilk vt-d w/a" btrfs: lower the dirty balance poll interval drm/i915/dp: Dither down to 6bpc if it makes the mode fit drm/i915: enable semaphores on per-device defaults drm/i915: don't set unpin_work if vblank_get fails drm/i915: By default, enable RC6 on IVB and SNB when reasonable iommu: Export intel_iommu_enabled to signal when iommu is in use drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check drm/i915: prevent division by zero when asking for chipset power drm/i915: add PCH info to i915_capabilities drm/i915: set the right SDVO transcoder for CPT drm/i915: no-lvds quirk for ASUS AT5NM10T-I sched: Fix select_idle_sibling() regression in selecting an idle SMT sibling ...
2011-12-20PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.MyungJoo Ham
Exynos4-bus device devfreq driver add DVFS capability for Exynos4210/4212/4412-Bus (memory). The driver monitors PPMU counters of memory controllers and adjusts operating frequencies and voltages with OPP. For Exynos4210, vdd_int is controlled. For exynos4412/4212, vdd_mif and vdd_int are controlled. Dependency (CONFIG_EXYNOS_ASV): Exynos4 ASV driver has been posted in the mailing list; however, it si not yet upstreamed. Although the current revision of Exynos4 ASV patch does not contain "CONFIG_EXYNOS_ASV", we have added the symbol to hide the dependent from compilers for now. As soon as Exynos4 ASV drivers are merged, the #ifdef statement will be removed or the name will be changed. However, enabling ASV is essential in most Exynos4 chips to reduce the power consumption of Exynos4210 because without ASV, this Devfreq driver assumes the worst case scenario, which consumes more power. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> --- Changes from v1 - Support 4212 and 4412 as well as 4210.
2011-11-23PM / devfreq: separate error paths from successful pathAxel Lin
I think this change improves code readability. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-14PM / devfreq: correct Kconfig dependencyMyungJoo Ham
Devfreq does not depend on OPP. The dependency is removed. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-14PM / devfreq: fix use after free in devfreq_remove_deviceAxel Lin
In devfreq_remove_device, calling _remove_devfreq will also free devfreq. Don't dereference devfreq->governor->no_central_polling after _remove_devfreq. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-10PM / devfreq: Remove compiler error after irq.h updateMyungJoo Ham
Added <linux/module.h> and <linux/stat.h> to avoid a compiler error because linux/irq.h no longer includes linux/module.h after Linux 3.2. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-02PM / devfreq: Add basic governorsMyungJoo Ham
Four cpufreq-like governors are provided as examples. powersave: use the lowest frequency possible. The user (device) should set the polling_ms as 0 because polling is useless for this governor. performance: use the highest freqeuncy possible. The user (device) should set the polling_ms as 0 because polling is useless for this governor. userspace: use the user specified frequency stored at devfreq.user_set_freq. With sysfs support in the following patch, a user may set the value with the sysfs interface. simple_ondemand: simplified version of cpufreq's ondemand governor. When a user updates OPP entries (enable/disable/add), OPP framework automatically notifies devfreq to update operating frequency accordingly. Thus, devfreq users (device drivers) do not need to update devfreq manually with OPP entry updates or set polling_ms for powersave , performance, userspace, or any other "static" governors. Note that these are given only as basic examples for governors and any devices with devfreq may implement their own governors with the drivers and use them. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mike Turquette <mturquette@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-02PM / devfreq: Add common sysfs interfacesMyungJoo Ham
Device specific sysfs interface /sys/devices/.../power/devfreq_* - governor R: name of governor - cur_freq R: current frequency - polling_interval R: polling interval in ms given with devfreq profile W: update polling interval. - central_polling R: 1 if polling is managed by devfreq framework Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mike Turquette <mturquette@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> -- Documentation/ABI/testing/sysfs-class-devfreq | 44 ++++++++++++++++ drivers/devfreq/devfreq.c | 69 ++++++++++++++++++++++++++ 2 files changed, 113 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-devfreq
2011-10-02PM: Introduce devfreq: generic DVFS framework with device-specific OPPsMyungJoo Ham
With OPPs, a device may have multiple operable frequency and voltage sets. However, there can be multiple possible operable sets and a system will need to choose one from them. In order to reduce the power consumption (by reducing frequency and voltage) without affecting the performance too much, a Dynamic Voltage and Frequency Scaling (DVFS) scheme may be used. This patch introduces the DVFS capability to non-CPU devices with OPPs. DVFS is a techique whereby the frequency and supplied voltage of a device is adjusted on-the-fly. DVFS usually sets the frequency as low as possible with given conditions (such as QoS assurance) and adjusts voltage according to the chosen frequency in order to reduce power consumption and heat dissipation. The generic DVFS for devices, devfreq, may appear quite similar with /drivers/cpufreq. However, cpufreq does not allow to have multiple devices registered and is not suitable to have multiple heterogenous devices with different (but simple) governors. Normally, DVFS mechanism controls frequency based on the demand for the device, and then, chooses voltage based on the chosen frequency. devfreq also controls the frequency based on the governor's frequency recommendation and let OPP pick up the pair of frequency and voltage based on the recommended frequency. Then, the chosen OPP is passed to device driver's "target" callback. When PM QoS is going to be used with the devfreq device, the device driver should enable OPPs that are appropriate with the current PM QoS requests. In order to do so, the device driver may call opp_enable and opp_disable at the notifier callback of PM QoS so that PM QoS's update_target() call enables the appropriate OPPs. Note that at least one of OPPs should be enabled at any time; be careful when there is a transition. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mike Turquette <mturquette@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>