summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)Author
2011-01-07drm/i915, intel_ips: When i915 loads after IPS, make IPS relink to i915.Eric Anholt
commit 63ee41d794d9c555f84205517a68509848988760 upstream. The IPS driver is designed to be able to run detached from i915 and just not enable GPU turbo in that case, in order to avoid module dependencies between the two drivers. This means that we don't know what the load order between the two is going to be, and we had previously only supported IPS after (optionally) i915, but not i915 after IPS. If the wrong order was chosen, you'd get no GPU turbo, and something like half the possible graphics performance. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-07drm/i915/dp: Fix I2C/EDID handling with active DisplayPort to DVI converterDavid Flynn
commit 8316f33766a82907c694267ff911e45e256f09f9 upstream. The DisplayPort standard (1.1a) states that: The I2C-over-AUX Reply field is valid only when Native AUX CH Reply field is AUX_ACK (00). When Native AUX CH Reply field is not 00, then, I2C-over-AUX Reply field must be 00 and be ignored. This fixes broken EDID reading when using an active DisplayPort to duallink DVI converter. If the AUX CH replier chooses to defer the transaction, a short read occurs and erroneous data is returned as the i2c reply due to a lack of length checking and failure to check for AUX ACK. As a result, broken EDIDs can look like: 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef 00: bc bc bc ff bc bc bc ff bc bc bc ac bc bc bc 45 ???.???.???????E 10: bc bc bc 10 bc bc bc 34 bc bc bc ee bc bc bc 4c ???????4???????L 20: bc bc bc 50 bc bc bc 00 bc bc bc 40 bc bc bc 00 ???P???.???@???. 30: bc bc bc 01 bc bc bc 01 bc bc bc a0 bc bc bc 40 ???????????????@ 40: bc bc bc 00 bc bc bc 00 bc bc bc 00 bc bc bc 55 ???.???.???.???U 50: bc bc bc 35 bc bc bc 31 bc bc bc 20 bc bc bc fc ???5???1??? ???? 60: bc bc bc 4c bc bc bc 34 bc bc bc 46 bc bc bc 00 ???L???4???F???. 70: bc bc bc 38 bc bc bc 11 bc bc bc 20 bc bc bc 20 ???8??????? ??? 80: bc bc bc ff bc bc bc ff bc bc bc ff bc bc bc ff ???.???.???.???. ... which can lead to: [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>30 30 30 30 30 30 30 32 38 32 30 32 63 63 31 61 000000028202cc1a <3>28 00 02 8c 00 00 00 00 18 00 00 00 00 00 00 00 (............... <3>20 4c 61 73 74 20 62 65 61 63 6f 6e 3a 20 33 32 Last beacon: 32 <3>32 30 6d 73 20 61 67 6f 46 00 05 8c 00 00 00 00 20ms agoF....... <3>36 00 00 00 00 00 00 00 00 0c 57 69 2d 46 69 20 6.........Wi-Fi <3>52 6f 75 74 65 72 01 08 82 84 8b 96 24 30 48 6c Router......$0Hl <3>03 01 01 06 02 00 00 2a 01 00 2f 01 00 32 04 0c .......*../..2.. <3>12 18 60 dd 09 00 10 18 02 00 00 01 00 00 18 00 ..`............. Signed-off-by: David Flynn <davidf@rd.bbc.co.uk> [ickle: fix up some surrounding checkpatch warnings] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-07drm/i915: Always set the DP transcoder config to 8BPC.Eric Anholt
commit 220cad3cbf553f893432919b458da36489373fc6 upstream. The pipe is always set to 8BPC, but here we were leaving whatever previous bits were set by the BIOS in place. Signed-off-by: Eric Anholt <eric@anholt.net> Tested-by: Keith Packard <keithp@keithp.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09i915: reprogram power monitoring registers on resumeKyle McMartin
commit 48fcfc888b48ad49dd83faa107264bbfb0089cad upstream. Fixes issue where i915_gfx_val was reporting values several orders of magnitude higher than physically possible (without leaving scorch marks on my thighs at least.) Signed-off-by: Kyle McMartin <kyle@redhat.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09drm/i915/sdvo: Always add a 30ms delay to make SDVO TV detection reliableChris Wilson
commit ba84cd1f2b5dd49bda9300c5a11373f7e14c3c66 upstream. Commit d09c23de intended to add a 30ms delay to give the ADD time to detect any TVs connected. However, it used the sdvo->is_tv flag to do so which is dependent upon the previous detection result and not whether the output supports TVs. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09drm/i915/overlay: Ensure that the reg_bo is in the GTT prior to writing.Chris Wilson
commit 0ddc1289f3ffd779779ddd3922f26ae7d0a21604 upstream. Just makes sure that writes are not being aliased by the CPU cache and do make it out to main memory. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=24977 Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09drm/i915: diasable clock gating for the panel power sequencerJesse Barnes
commit 382b09362711d7d03272230a33767015a277926e upstream. Needed on Ibex Peak and Cougar Point or the panel won't always come on. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09drm/i915: Free hardware status page on unload when physically mappedKeith Packard
commit c2873e9633fe908dccd36dbb1d370e9c59a1ca62 upstream. A physically mapped hardware status page is allocated at driver load time but was never freed. Call the existing code to free this page at driver unload time on hardware which uses this kind. Signed-off-by: Keith Packard <keithp@keithp.com> [ickle: call before tearing down registers on KMS-only path, as pointed out by Dave Airlie] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09drm/i915/crt: Make sure the hotplug interrupt is enabledYuanhan Liu
commit 1510a97182b4ddb5fe3c4e8d05240f7cd6fd13e7 upstream. After disabling the hotplug interrupts for VGA detection on Ironlake, be sure to re-enable them again afterwards. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30378 Signed-off-by: Yuanhan Liu <yuanhan.liu@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09drm/i915: Update hotplug interrupts register definitions for SandybridgeYuanhan Liu
commit 2d7b8366ae4a9ec2183c30e432a4a9a495c82bcd upstream. On Sandybridge, the bit definition for hotplug on SDE has changed, so update the code to new definition. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30378 Signed-off-by: Yuanhan Liu <yuanhan.liu@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-08drm/i915: Prevent module unload to avoid random memory corruptionChris Wilson
The i915 driver has quite a few module unload bugs, the known ones at least have fixes that are targeting 2.6.37. However, in order to maintain a stable kernel, we should prevent this known random memory corruption following driver unload. This should have very low impact on normal users who are unlikely to need to unload the i915 driver. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-07drm: don't drop handle reference on unloadDave Airlie
since the handle references are all tied to a file_priv, and when it disappears all the handle refs go with it. The fbcon ones we'd only notice on unload, but the nouveau notifier one would would happen on reboot. nouveau: Reported-by: Marc Dionne <marc.c.dionne@gmail.com> nouveau: Tested-by: Marc Dionne <marc.c.dionne@gmail.com> i915 unload: Reported-by: Keith Packard <keithp@keithp.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-04Merge branch 'drm-intel-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: drm/i915: Rephrase pwrite bounds checking to avoid any potential overflow drm/i915: Sanity check pread/pwrite drm/i915: Use pipe state to tell when pipe is off drm/i915: vblank status not valid while training display port drivers/gpu/drm/i915/i915_gem.c: Add missing error handling code drm/i915: Fix refleak during eviction. drm/i915: fix GMCH power reporting
2010-10-03drm/i915: Rephrase pwrite bounds checking to avoid any potential overflowChris Wilson
... and do the same for pread. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-10-03drm/i915: Sanity check pread/pwriteChris Wilson
Move the access control up from the fast paths, which are no longer universally taken first, up into the caller. This then duplicates some sanity checking along the slow paths, but is much simpler. Tracked as CVE-2010-2962. Reported-by: Kees Cook <kees@ubuntu.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-10-03drm/i915: Use pipe state to tell when pipe is offKeith Packard
Instead of waiting for the display line value to settle, we can simply wait for the pipe configuration register 'state' bit to turn off. Contrarywise, disabling the plane will not cause the display line value to stop changing, so instead we wait for the vblank interrupt bit to get set. And, we only do this when we're not about to wait for the pipe to turn off. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-03drm/i915: vblank status not valid while training display portKeith Packard
While the display port is in training mode, vblank interrupts don't occur. Because we have to wait for the display port output to turn on before starting the training sequence, enable the output in 'normal' mode so that we can tell when a vblank has occurred, then start the training sequence. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-02drivers/gpu/drm/i915/i915_gem.c: Add missing error handling codeJulia Lawall
Extend the error handling code with operations found in other nearby error handling code A simplified version of the sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ @r@ statement S1,S2,S3; constant C1,C2,C3; @@ *if (...) {... S1 return -C1;} ... *if (...) {... when != S1 return -C2;} ... *if (...) {... S1 return -C3;} // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-10-01Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: vmwgfx: Fix fb VRAM pinning failure due to fragmentation vmwgfx: Remove initialisation of dev::devname vmwgfx: Enable use of the vblank system vmwgfx: vt-switch (master drop) fixes drm/vmwgfx: Fix breakage introduced by commit "drm: block userspace under allocating buffer and having drivers overwrite it (v2)" drm: Hold the mutex when dropping the last GEM reference (v2) drm/gem: handlecount isn't really a kref so don't make it one. drm: i810/i830: fix locked ioctl variant drm/radeon/kms: add quirk for MSI K9A2GM motherboard drm/radeon/kms: fix potential segfault in r600_ioctl_wait_idle drm: Prune GEM vma entries drm/radeon/kms: fix up encoder info messages for DFP6 drm/radeon: fix PCI ID 5657 to be an RV410
2010-10-01drm/i915: Fix refleak during eviction.Chris Wilson
Now that we hold onto a reference whilst evicting objects, we need to be sure that we drop all the references taken -- even on the error paths. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-01drm/gem: handlecount isn't really a kref so don't make it one.Dave Airlie
There were lots of places being inconsistent since handle count looked like a kref but it really wasn't. Fix this my just making handle count an atomic on the object, and have it increase the normal object kref. Now i915/radeon/nouveau drivers can drop the normal reference on userspace object creation, and have the handle hold it. This patch fixes a memory leak or corruption on unload, because the driver had no way of knowing if a handle had been actually added for this object, and the fbcon object needed to know this to clean itself up properly. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-27drm/i915: fix GMCH power reportingJesse Barnes
The IPS driver needs to know the current power consumption of the GMCH in order to make decisions about when to increase or decrease the CPU and/or GPU power envelope. So fix up the divisions to save the results so the numbers are actually correct (contrary to some earlier comments and code, these functions do not modify the first argument and use it for the result). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-23drm/i915/sdvo: Handle unsupported GET_SUPPORTED_ENHANCEMENTS gracefullyChris Wilson
In the event that the external chipset doesn't implement the GET_SUPPORTED_ENHANCEMENTS commands, gracefully treat it as having no enhancments rather than bailing. Reported-and-tested-by: Woody Suwalski <terraluna977@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18342 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-23drm/i915/sdvo: Cleanup connector on error pathChris Wilson
We weren't unlinking the freed connector from the drm lists, and so hit some use-after-free if we failed to initialise the connector. Reported-and-tested-by: Woody Suwalski <terraluna977@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18342 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-23drm/i915: Fix 945GM regression in e259befdChris Wilson
A minor typo caused a single fence register to be incorrectly programmed, resulting in occassional tiling corruption. Reported-and-tested-by: Hans de Bruin <bruinjm@xs4all.nl> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18962 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-21Merge remote branch 'linus' into drm-intel-fixesChris Wilson
2010-09-20drm/i915: Hold a reference to the object whilst unbinding the eviction listChris Wilson
During heavy aperture thrashing we may be forced to wait upon several active objects during eviction. The active list may be the last reference to these objects and so the action of waiting upon one of them may cause another to be freed (and itself unbound). To prevent the object disappearing underneath us, we need to acquire and hold a reference whilst unbinding. This should fix the reported page refcount OOPS: kernel BUG at drivers/gpu/drm/i915/i915_gem.c:1444! ... RIP: 0010:[<ffffffffa0093026>] [<ffffffffa0093026>] i915_gem_object_put_pages+0x25/0xf5 [i915] Call Trace: [<ffffffffa009481d>] i915_gem_object_unbind+0xc5/0x1a7 [i915] [<ffffffffa0098ab2>] i915_gem_evict_something+0x3bd/0x409 [i915] [<ffffffffa0027923>] ? drm_gem_object_lookup+0x27/0x57 [drm] [<ffffffffa0093bc3>] i915_gem_object_bind_to_gtt+0x1d3/0x279 [i915] [<ffffffffa0095b30>] i915_gem_object_pin+0xa3/0x146 [i915] [<ffffffffa0027948>] ? drm_gem_object_lookup+0x4c/0x57 [drm] [<ffffffffa00961bc>] i915_gem_do_execbuffer+0x50d/0xe32 [i915] Reported-by: Shawn Starr <shawn.starr@rogers.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18902 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-17drm/i915,agp/intel: Add second set of PCI-IDs for B43Chris Wilson
There is a second revision of B43 (a desktop gen4 part) floating around, functionally equivalent to the original B43, so simply add the new PCI-IDs. Bugzilla: https://bugs.freedesktop.org/show_bugs.cgi?id=30221 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-17drm/i915: Fix Sandybridge fence registersChris Wilson
With 5 places to update when adding handling for fence registers, it is easy to overlook one or two. Correct that oversight, but fence management should be improved before a new set of registers is added. Bugzilla: https://bugs.freedesktop.org/show_bug?id=30199 Original patch by: Yuanhan Liu <yuanhan.liu@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-17drm/i915/crt: Downgrade warnings for hotplug failuresChris Wilson
These are not fatal errors, so do not alarm the user by filling the logs with *** ERROR ***. Especially as we know that g4x CRT detection is a little sticky. On the one hand the errors are valid since they are warning us of a stall -- we poll the register whilst holding the mode lock so not even the mouse will update. On the other hand, those stalls were already present yet nobody complained. Reported-by: Andi Kleen <andi@firstfloor.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18332 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-14drm: Use a nondestructive mode for output detect when polling (v2)Chris Wilson
v2: Julien Cristau pointed out that @nondestructive results in double-negatives and confusion when trying to interpret the parameter, so use @force instead. Much easier to type as well. ;-) And fix the miscompilation of vmgfx reported by Sedat Dilek. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13drm: Use a nondestructive mode for output detect when pollingChris Wilson
Destructive load-detection is very expensive and due to failings elsewhere can trigger system wide stalls of up to 600ms. A simple first step to correcting this is not to invoke such an expensive and destructive load-detection operation automatically. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29536 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16265 Reported-by: Bruno Prémont <bonbons@linux-vserver.org> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-12drm/i915: Ensure that the crtcinfo is populated during mode_fixup()Chris Wilson
This should fix the mysterious mode setting failures reported during boot up and after resume, generally for i8xx class machines. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16478 Reported-and-tested-by: Xavier Chantry <chantry.xavier@gmail.com> Buzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29413 Tested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-10drm/i915: don't enable self-refresh on IronlakeJesse Barnes
We don't know how to enable it safely, especially as outputs turn on and off. When disabling LP1 we also need to make sure LP2 and 3 are already disabled. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29173 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29082 Reported-by: Chris Lord <chris@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-09drm/i915: Double check that the wait_request is not pending before warningChris Wilson
If we are busy, then we may have woken up the wait_request handler but not yet serviced it before the hang check fires. So in hang check, double check that the i915_gem_do_wait_request() is still pending the wake-up before declaring all hope lost. Fixes regression with e78d73b16bcde921c9cf458d2e4de8e4fc2518f3. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30073 Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08Revert "drm/i915: Warn if we run out of FIFO space for a mode"Chris Wilson
This reverts commit b9421ae8f30958deea98d71477b4a77a066856b4. This warning was so prelevant, even for apparently working machines, that it was just causing fear, anxiety and panic. The root cause still remains, so we will add some better debugging when we focus on fixing it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=17021 Reported-by: Maciej Rutecki <maciej.rutecki@gmail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08Revert "drm/i915: Allow LVDS on pipe A on gen4+"Chris Wilson
This reverts commit 0f3ee801b332d6ff22285386675fe5aaedf035c3. Enabling LVDS on pipe A was causing excessive wakeups on otherwise idle systems due to i915 interrupts. So restrict the LVDS to pipe B once more, whilst the issue is properly diagnosed. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16307 Reported-and-tested-by: Enrico Bandiello <enban@postal.uv.es> Poked-by: Florian Mickler <florian@mickler.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Adam Jackson <ajax@redhat.com> Cc: stable@kernel.org
2010-09-07Revert "drm/i915: Enable RC6 on Ironlake."Chris Wilson
This reverts commit ce17178094f368d9e3f39b2cb4303da5ed633dd4. This commit has been independently bisected a few times as being the cause of a s2ram failure. Reported-and-tested-by: Kyle McMartin <kyle@mcmartin.ca> Reported-and-tested-by: Andy Isaacson <adi@hexapodia.org> Cc: Zou Nan hai <nanhai.zou@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07intel_agp,i915: Add more sandybridge graphics device idsZhenyu Wang
New pci ids for GT2 and GT2+ on desktop and mobile sandybridge, and graphics device ids for server sandybridge. Also rename original ids string to reflect GT1 version. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07drm/i915: Enable MI_FLUSH on SandybridgeZhenyu Wang
MI_FLUSH is being deprecated, but still available on Sandybridge. Make sure it's enabled as userspace still uses MI_FLUSH. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07agp/intel: Fix cache control for SandybridgeZhenyu Wang
Sandybridge GTT has new cache control bits in PTE, which controls graphics page cache in LLC or LLC/MLC, so we need to extend the mask function to respect the new bits. And set cache control to always LLC only by default on Gen6. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07drm/i915: Prevent double dpms onChris Wilson
Arguably this is a bug in drm-core in that we should not be called twice in succession with DPMS_ON, however this is still occuring and we see FDI link training failures on the second call leading to the occassional blank display. For the time being ignore the repeated call. Original patch by Dave Airlie <airlied@redhat.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-07drm/i915: Avoid use of uninitialised values when disabling panel-fitterChris Wilson
We were passing garbage values into the panel-fitter control register when disabling it on Ironlake - those values (filter modes and reserved MBZ bits) would have then be re-used the next time panel-fitting was enabled. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07drm/i915: Avoid pageflipping freeze when we miss the flip prepare interruptSimon Farnsworth
When we miss the flip prepare interrupt, we never get into the software state needed to restart userspace, resulting in a freeze of a full-screen OpenGL application (such as a compositor). Work around this by checking DSPxSURF/DSPxBASE to see if the page flip has actually happened. If it has, do the work we would have done when the flip prepare interrupt comes in. Also, add debugfs information to tell us what's going on (based on the patch from Chris Wilson attached to bugs.fdo bug #29798). Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07drm/i915: Tightly scope intel_encoder to prevent invalid useChris Wilson
We reset intel_encoder for every matching encoder whilst iterating over the encoders attached to this crtc when changing mode. As such in a cloned configuration intel_encoder may not correspond to the correct is_edp encoder. By scoping intel_encoder to the loop, not only is the compiler able to spot this mistake, we also improve readiability for ourselves. [It might not be a mistake, within this function it is unclear as to whether it is permissable for eDP to be cloned...] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07drm/i915: Allocate the PCI resource for the MCHBARChris Wilson
We were failing when trying to allocate the resource for MMIO of the MCHBAR because we forgot to specify what type of resource we wanted. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@kernel.org Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-07drm/i915/dp: Really try 5 times before giving up.Chris Wilson
Only stop trying if the aux channel sucessfully reports that the transmission was completed, otherwise try again. On the 5th failure, bail and report that something is amiss. This fixes a sporadic failure in reading the EDID for my external panel over DP. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-07drm/i915/sdvo: Restore guess of the DDC bus in absence of VBIOSChris Wilson
If the VBIOS tells us the mapping of the SDVO device onto the DDC bus, use it. However, if there is no VBIOS available that mapping is uninitialised and we should fallback to our earlier guess. Fix regression introduced in b1083333 (which in turn is a fix for the regression caused by the introduction of this guess, 14571b4). References: Bug 29499 - [945GM] Screen disconnected because of missing VBIOS https://bugs.freedesktop.org/show_bug.cgi?id=29499 Bug 15109 - i945GM fails to detect EDID on DVI port https://bugzilla.kernel.org/show_bug.cgi?id=15109 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Cc: Adam Jackson <ajax@redhat.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org
2010-09-07drm/i915/dp: Boost timeout for enabling transcoder to 100msChris Wilson
Adam Hill reported that his Arrandale system required a much longer, up to 200x500us, wait for the panel to initialise or else modesetting would fail. References: https://bugs.freedesktop.org/show_bug.cgi?id=29141 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: Adam Hill <sidepipeuk@yahoo.co.uk>
2010-09-07drm/i915: Re-use set_base_atomic to share setting of the display registersChris Wilson
Lets try to avoid repeating old bugs. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-24 22:27:22 +0000