summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2012-08-20drm/radeon: fix checking of MSAA renderbuffers on r600-r700Marek Olšák
The MSAA checking was mostly unimplemented on r600-r700. The userspace submits GPU commands and the kernel driver computes how much memory the GPU will access and checks if it's all within buffer bounds the userspace allocated. This patch fixes the computations of the size of MSAA surfaces in memory. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-20drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700Marek Olšák
MSAA is impossible without them. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-08-20drm/radeon: init lockup timeout on ring initChristian König
Reset the lockup timeout on ring (re-)initialisation. Otherwise we get error messages like this on gpu resets: [ 1559.949177] radeon 0000:01:00.0: GPU lockup CP stall for more than 1482270msec Signed-off-by: Christian König <deathsimple@vodafone.de> cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
2012-08-20drm/radeon: avoid turning off spread spectrum for used pllJerome Glisse
If spread spectrum is enabled and in use for a given pll we should not turn it off as it will lead to turning off display for crtc that use the pll (this behavior was observed on chelsea edp). Signed-off-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-15Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie
git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes * 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/nve0/fifo: add support for the flip completion swmthd
2012-08-15Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel Vetter writes: "A few important fixers: - fix various lvds backlight issues, regressed in 3.6 (Takashi Iwai) - make the retina mbp work (ignore bogus edp bpc value in vbt) - fix a gmbus regression introduced in (iirc) 3.4 (Jani Nikula) - fix an edp panel power sequence regression, fixes the new macbook air - apply the tlb invalidate w/a Otherwise we still have another gmbus regression (patches are awaiting tested-bys) and there's something odd going with some rare systems not entering rc6 often enough (and hence blowing through too much power). It seems to be a timing-related issue and can be mitigated by frobbing the magic tuning parameters. We're still working on that one. Also, we still have some fallout from the hw context support, but you can only hit that with mesa master." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid
2012-08-14drm/i915: Apply post-sync write for pipe control invalidatesChris Wilson
When invalidating the TLBs it is documentated as requiring a post-sync write. Failure to do so seems to result in a GPU hang. Exposure to this hang on IVB seems to be a result of removing the extra stalls required for SNB pipecontrol workarounds: commit 6c6cf5aa9c583478b19e23149feaa92d01fb8c2d Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jul 20 18:02:28 2012 +0100 drm/i915: Only apply the SNB pipe control w/a to gen6 Note: Manually switch the pipe_control cmd to 4 dwords to avoid a (silent) functional conflict with -next. This way will get a loud (but conflict with next (since the scratch_addr has been deleted there). Reported-and-tested-by: yex.tian@intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53322 Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: added note about merge conflict with -next.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-14drm/i915: reorder edp disabling to fix ivb MacBook AirDaniel Vetter
eDP is tons of fun. It turns out that at least the new MacBook Air 5,1 model absolutely doesn't like the new force vdd dance we've introduced in commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel But that patch also tried to fix some neat edp sequence issue with the force_vdd timings. Closer inspection reveals that we've raised force_vdd only to do the aux channel communication dp_sink_dpms. If we move the edp_panel_off below that, we don't need any force_vdd for the disable sequence, which makes the Air happy. Unfortunately the reporter of the original bug that the above commit fixed is travelling, so we can't test whether this regresses things. But my theory is that since we don't check for any power-off -> force_vdd-on delays in edp_panel_vdd_on, this was the actual root-cause of this failure. With that force_vdd dance completely eliminated, I'm hopeful the original bug stays fixed, too. For reference the old bug, which hopefully doesn't get broken by this: https://bugzilla.kernel.org/show_bug.cgi?id=43163 In any case, regression fixers win over plain bugfixes, so this needs to go in asap. v2: The crucial pieces seems to be to clear the force_vdd flag uncoditionally, too, in edp_panel_off. Looks like this is left behind by the firmware somehow. v3: The Apple firmware seems to switch off the panel on it's own, hence we still need to keep force_vdd on, but properly clear it when switching the panel off. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671 Tested-by: Roberto Romer <sildurin@gmail.com> Tested-by: Daniel Wagner <wagi@monom.org> Tested-by: Keith Packard <keithp@keithp.com> Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-14drm/nv86/fifo: suspend fixMaxim Levitsky
This fix is a backport from the reworked nouveau driver. It masks off the engines we're not expecting to use before attempting a channel kickoff. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nouveau: disable copy engine on NVAFHenrik Rydberg
The copy engine exhibits random memory corruption in at least one case, the GeForce 320M (nv50, 0xaf) in the MacBookAir3,1. This patch omits creating the engine for the specific chipset, falling back to M2MF, which kills the symptoms. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14nouveau: fixup scanout enable in nvc0_pmMaarten Lankhorst
Fixes screen being black after changing performance level. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: stable@vger.kernel.org [3.5+] Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nouveau/aux: mask off higher bits of auxch index in i2c table entryBen Skeggs
At least partially fixes DP output detection on W530. Not sure if more issues remain, or if my adaptor is just behaving weirdly (it does that sometimes). In any case, this patch is necessary. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinateChristoph Bumiller
Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2012-08-13drm/i915: ensure i2c adapter is all set before adding itJani Nikula
i2c_add_adapter() may do i2c transfers on the bus to detect supported devices. Therefore the adapter needs to be all set before adding it. This was not the case for the bit-banging fallback, resulting in an oops if the device detection GMBUS transfers timed out. Fix the issue by calling i2c_add_adapter() only after intel_gpio_setup(). LKML-Reference: <5021F00B.7000503@ionic.de> Tested-by: Mihai Moldovan <ionic@ionic.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-13drm/radeon: fix typo in function header commentDmitrii Cherkasov
Signed-off-by: Dmitrii Cherkasov <DCherkasov@luxsoft.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: implement timestamp userspace query (v2)Marek Olšák
Returns a snapshot of the GPU clock counter. Needed for certain OpenGL extensions. v2: agd5f - address Jerome's comments - add function documentation Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: add MSAA texture support for r600-evergreenMarek Olšák
Most of the checking seems to be in place already. As you can see, log2(number of samples) resides in LAST_LEVEL. This is required for MSAA support (namely for depth-stencil resolve and blitting between MSAA resources). Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: reorder code in r600_check_texture_resourceMarek Olšák
Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: fence virtual address and free it once idle v4Jerome Glisse
Virtual address need to be fenced to know when we can safely remove it. This patch also properly clear the pagetable. Previously it was serouisly broken. Kernel 3.5/3.4 need a similar patch but adapted for difference in mutex locking. v2: For to update pagetable when unbinding bo (don't bailout if bo_va->valid is true). v3: Add kernel 3.5/3.4 comment. v4: Fix compilation warnings. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: fix some missing parens in asic macrosAlex Deucher
Better safe than sorry. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-08-13drm/radeon: fix ordering in pll picking on dce4+Alex Deucher
No functional change, but re-order the cases so they evaluate properly due to the way the DCE macros work. Noticed by kallisti5 on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: do not reenable crtc after moving vram start addressJerome Glisse
It seems we can not update the crtc scanout address. After disabling crtc, update to base address do not take effect after crtc being reenable leading to at least frame being scanout from the old crtc base address. Disabling crtc display request lead to same behavior. So after changing the vram address if we don't keep crtc disabled we will have the GPU trying to read some random system memory address with some iommu this will broke the crtc engine and will lead to broken display and iommu error message. So to avoid this, disable crtc. For flicker less boot we will need to avoid moving the vram start address. This patch should also fix : https://bugs.freedesktop.org/show_bug.cgi?id=42373 Cc: <stable@vger.kernel.org> Signed-off-by: Jerome Glisse <jglisse@redhat.com>
2012-08-13drm/radeon: fix bank tiling parameters on caymanAlex Deucher
Handle the 16 bank case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-13drm/radeon: fix bank tiling parameters on evergreenAlex Deucher
Handle the 16 bank case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-13drm/radeon: fix bank tiling parameters on SIChristian König
The sixteen bank case wasn't handled here, leading to GPU crashes because of userspace miscalculation. Signed-off-by: Christian König <deathsimple@vodafone.de> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: properly handle crtc powergatingAlex Deucher
Need to make sure the crtc is gated on before modesetting. Explicitly gate the crtc on in prepare() and set a flag so that the dpms functions don't gate it off during mode set. Noticed by sylware on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-13drm/radeon: properly handle SS overrides on TN (v2)Alex Deucher
The IntegratedSystemInfo table changed versions on TN. Update the SS override lookup to handle it. v2: fix copy-paste typo. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/dce4+: set a more reasonable cursor watermarkAlex Deucher
Set a more reasonable default cursor watermark. The recommended default value is 4. This should reduce urgency requests to the MC form the display hw. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon: fix handling for ddc type 5 on combiosAlex Deucher
When ddc type is 5, need to look up the i2c channel in the i2c table. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-11drm/i915: ignore eDP bpc settings from vbtDaniel Vetter
This has originally been introduced to not oversubscribe the dp links in commit 885a5fb5b120a5c7e0b3baad7b0feb5a89f76c18 Author: Zhenyu Wang <zhenyuw@linux.intel.com> Date: Tue Jan 12 05:38:31 2010 +0800 drm/i915: fix pixel color depth setting on eDP Since then we've fixed up the dp link bandwidth calculation code and should now automatically fall back to 6bpc dithering. So this is unnecessary. Furthermore it seems to break the new MacbookPro with retina display, hence let's just rip this out. Reported-by: Benoit Gschwind <gschwind@gnu-log.net> Cc: Benoit Gschwind <gschwind@gnu-log.net> Cc: Francois Rigaut <frigaut@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Tested-by: Benoit Gschwind <gschwind@gnu-log.net> Tested-by: Bernhard Froemel <froemel at vmars tuwien.ac.at> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> -- Testing feedback highgly welcome, and thanks for Benoit for finding out that the bpc computations are busted. -Daniel
2012-08-11drm/i915: Fix blank panel at reopening lidTakashi Iwai
When you reopen the lid on a laptop with PCH, the panel suddenly goes blank sometimes. It seems because BLC_PWM_CPU_CTL register is cleared to zero when BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1 registers are enabled. This patch fixes the problem by moving the call of the function setting BLC_PWM_CPU_CTL after enabling other two registers. Reported-and-tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-10drm/mgag200: fix G200ER pll picking algorithmDave Airlie
The original code was misported from the X driver, a) an int went to unsigned int, breaking the downward counting testm code b) the port did the vco/computed clock bits completely wrong. This fixes an infinite loop on modprobe on some Dell servers with the G200ER chipset variant. Found in internal testing. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-10drm/edid: Fix potential memory leak in edid_load()Alexey Khoroshilov
Do not leak memory by updating pointer with potentially NULL realloc return value. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Carsten Emde <C.Emde@osadl.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-09drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]Thomas Meyer
The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-09Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Daniel writes: "- Regression fixer for an OOPS at boot when i915.ko is built-in and CONFIG_PM=n, introduce in 3.5 (patch from Hunt Xu) - Regression fixer for occlusion query failures, the required w/a wasn't applied in all cases (thanks to Eric for tracking this on down). - dmar vs. dma_buf imprt fix (Dave Airlie) - 2 patches to fight down forcewake issues on snb. This is the stuff I've talked about 2 weeks ago already, it's a minefield. Investigation still going on, but afaict this is the best we have for now. - a few minor things to keep coverty&compiler happy (Alan, Davendra, Stéphane) - tons of hsw pci ids - this one is a bit late because internal approval sometimes takes a while, but ppl in charge finally agreed that world+dog already knows about ult and crw haswell variants ;-) Wrt regressions I'm aware of: - the power regression due to semaphores=1. Ben is running around with a killawatt, unfortunately we have a hard time reproducing this one. And this /shouldn't/ increase power usage. Ben has turned up a few odds bits though already. - the lvds fix in 3.6-rc1 broke a backlight after lid close/open (but can be resurrected with a modeset cycle). I guess we anger the bios - I'm still looking into this one. - gmbus broke edid reading on an odd-ball monitor, we need to fall-back. Due to vacation (both mine&the reporter's) this is stalling for a final patch and a tested-by on it. But issue is fully diagnosed." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: correctly order the ring init sequence drm/i915: add more Haswell PCI IDs drm/i915: make rc6 in sysfs functions conditional drm/i915: Workaround hang with BSD and forcewake on SandyBridge drm/i915: Make intel_panel_get_backlight static. i915: don't map imported dma-bufs for dmar. drm/i915: remove unused variable drm/i915: Don't forget to apply SNB PIPE_CONTROL GTT workaround. drm/i915: fix forcewake related hangs on snb i915: Remove silly test i915: fix error path leak in intel_sdvo_write_cmd vlv: it might be wise if we initialised the flag value...
2012-08-09drm/radeon/kms: allow "invalid" DB formats as a means to disable DBMarek Olšák
Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-08drm/i915: correctly order the ring init sequenceDaniel Vetter
We may only start to set up the new register values after having confirmed that the ring is truely off. Otherwise the hw might lose the newly written register values. This is caught later on in the init sequence, when we check whether the register writes have stuck. Cc: stable@vger.kernel.org Reviewed-by: Jani Nikula <jani.nikula@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50522 Tested-by: Yang Guang <guang.a.yang@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-07drm/i915: add more Haswell PCI IDsPaulo Zanoni
Also properly indent the HB IDs. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-06drm/i915: make rc6 in sysfs functions conditionalHunt Xu
Commit 0136db586c028f71e7cc21cc183064ff0d5919c8 merges rc6 information into the power group. However, when compiled with CONFIG_PM not set, modprobing i915 would taint since power_group_name is defined as NULL. This patch makes these rc6 in sysfs functions conditional upon the definition of the CONFIG_PM macro to avoid the above-mentioned problem. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45181 Cc: stable@vger.kernel.org Tested-by: Kris Karas <bugs-a12@moonlit-rail.com> Signed-off-by: Hunt Xu <mhuntxu@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-06drm/i915: Workaround hang with BSD and forcewake on SandyBridgeChris Wilson
For reasons that are not apparent to anybody, 990bbdadaba (drm/i915: Group the GT routines together in both code and vtable) breaks the use of the BitStream Decoder ring on SandyBridge. The active ingredient of that patch is the conversion from a udelay(10) to a udelay(1) in the busy-wait loop of waiting for the forcewake acknowledge. If we restore that udelay(10) or insert another udelay(1) afterwards (or any wait longer than 250ns) everything works again. An alternative is also to remove any delay from the busy-wait loop. Given that in the atomic sections we want to complete the wait as quick as possible to avoid blocking the CPU for too long, it makes sense to remove the delay altogether and simply spin on the exit condition until it completes. So we replace the udelay(1) with cpu_relax(). Papers over regression from commit 990bbdadabaa51828e475eda86ee5720a4910cc3 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Jul 2 11:51:02 2012 -0300 drm/i915: Group the GT routines together in both code and vtable Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51738 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-06drm/i915: Make intel_panel_get_backlight static.Stéphane Marchesin
This function isn't used outside of intel_panel.c, so make it static. Signed-off-by: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-05i915: don't map imported dma-bufs for dmar.Dave Airlie
The exporter should have given us pages in the correct place, avoid the prepare object mapping phase on dmar systems. This fixes an oops on a GM45/R600 machine, when running the intel/radeon tests. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-05drm/i915: remove unused variableDevendra Naga
the following warning was produced, drivers/gpu/drm/i915/i915_gem_context.c: In function ‘i915_switch_context’: drivers/gpu/drm/i915/i915_gem_context.c:454:6: warning: unused variable ‘ret’ [-Wunused-variable] fix up by removing it Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-05drm/i915: Don't forget to apply SNB PIPE_CONTROL GTT workaround.Eric Anholt
If a buffer that was the target of a PIPE_CONTROL from userland was a reused one that hadn't been evicted which had not previously had this workaround applied, then the early return for a correct presumed_offset in this function meant we would not bind it into the GTT and the write would land somewhere else. Fixes reproducible failures with GL_EXT_timer_query usage in apitrace, and I also expect it to fix the intermittent OQ issues on snb that danvet's been working on. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48019 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52932 Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Carl Worth <cworth@cworth.org> Tested-by: Carl Worth <cworth@cworth.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-03drm/nve0/fifo: add support for the flip completion swmthdBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-07-30Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull Exynos DRM changes from Dave Airlie: "So I totally missed Inki's pull request for -next, its fully exynos self contained." (I took just the actual commits, not Dave's two extraneous merges) * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (30 commits) drm/exynos: fixed exception to page allocation failure drm/exynos: use __free_page() to deallocate memory drm/exynos: fixed a comment to gem size. drm/exynos: removed unnecessary variable drm/exynos: do not release memory region from exporter. drm/exynos: set buffer type from exporter. drm/exynos: use alloc_page() to allocate pages. drm/exynos: fixed build warning. drm/exynos: fixed edid data setting at vidi connection request drm/exynos: check if raw edid data is fake or not for test drm/exynos: set edid fake data only for test. drm/exynos: removed unnecessary declaration. drm/exynos: fix buffer pitch calculation drm/exynos: check for null in return value of dma_buf_map_attachment() drm/exynos: return NULL if exynos_pages_to_sg fails drm/exynos: Use devm_* functions in exynos_mixer.c drm/exynos: Use devm_* functions in exynos_hdmi.c drm/exynos: Use devm_* functions in exynos_drm_fimd.c drm/exynos: Add missing static storage class specifier drm/exynos: add property for crtc mode ...
2012-07-27drm/i915: fix forcewake related hangs on snbDaniel Vetter
... by adding seemingly redudant posting reads. This little dragon lair exploded the first time around when we've refactored the code a bit to use the common wait_for_atomic_us in "drm/i915: Group the GT routines together in both code and vtable", which caused QA to file fdo bug #51738. Chris Wilson entertained a few approaches to fixing #51738: Replacing the udelay(1) with the previously-used udelay(10) (or any other "sufficiently larger" delay), adding a posting read, or ditching the delay completely and using cpu_relax. We went with the cpu_relax and "915: Workaround hang with BSD and forcewake on SandyBridge". Which blew up in fdo bug #52424, but adding the posting read while still using cpu_relax seems to also fix that, it looks like the posting read is the important ingriedient to fix these rc6 related hangs on snb. Popular theories as to why this is like it is include: - A herd of pink elephants got royally angered somehow. - The gpu has internally different functional units and judging by the register offsets, the forcewake request register and the forcewake ack registers are _not_ in the same functional unit (or at least aren't reached through the same routes). Hence the posting read syncs up with the wrong block and gets the entire gpu confused. - ... As a minimal ducttape fix for 3.6, let's just put these posting reads into place again. We can try fancier approaches (like adding back the cpu_relax instead of the udelay) in -next. This (re-)fixes a regression introduced in commit 990bbdadabaa51828e475eda86ee5720a4910cc3 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Jul 2 11:51:02 2012 -0300 drm/i915: Group the GT routines together in both code and vtable Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Du Yan <yanx.du@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52424 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51738u Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-27drm/exynos: fixed exception to page allocation failureInki Dae
this patch corrects to deallocate the pages allocated already at alloc_page failure. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27drm/exynos: use __free_page() to deallocate memoryInki Dae
this patch uses __free_page() to deallocate the pages allocated by alloc_page() and the pages doesn't need set_parge_dirty() and mark_page_accessed() because they aren't from page cache so removes them. this patch has a pair with previous patch below, http://www.spinics.net/lists/dri-devel/msg24382.html Changelog v2: remove unnecessary arguments. Changelog v3: fix npages type. - npages can have negative value. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27drm/exynos: fixed a comment to gem size.Inki Dae
Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-31 10:42:28 +0000