summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2015-05-13drm/radeon: check new address before removing old oneChristian König
commit c29c0876ec05d51a93508a39b90b92c29ba6423d upstream. Otherwise the change isn't atomic. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-13drm/radeon: reset BOs address after clearing it.Christian König
commit 48afbd70ac7b6aa62e8d452091023941d8085f8a upstream. Otherwise it is possible that we will have page table corruption if we change a BOs address multiple times. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-13drm/radeon: fix lockup when BOs aren't part of the VM on releaseChristian König
commit 26d4d129b6042197b4cbc8341c0618f99231af2f upstream. If we unmap BOs before releasing them them the intervall tree locks up because we try to remove an entry not inside the tree. Based on a patch from Michel Dänzer. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-13drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5Alex Deucher
commit cd17e02ff4db58ec32d35cf331c705d295779930 upstream. Seems to have problems with high mclks. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-13drm/radeon: adjust pll when audio is not enabledAlex Deucher
commit 7fe04d6fa824ccea704535a597dc417c8687f990 upstream. Fixes display problems with some monitors when audio is not enabled. Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=89505 https://bugzilla.kernel.org/show_bug.cgi?id=94171 Plus several reports on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-13drm/radeon: Use drm_calloc_ab for CS relocsMichel Dänzer
commit b421ed15d2c3039eb724680e4de1e4b2bd196a9a upstream. The number of relocs is passed in by userspace and can be large. It has been observed to cause kcalloc failures in the wild. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-13drm/radeon: only enable audio streams if the monitor supports itAlex Deucher
commit 38aef1549b18539eaecd804383a6ccb6588a9ce1 upstream. Selectively enable which packets we send based on monitor caps. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-13drm/radeon: only mark audio as connected if the monitor supports it (v3)Alex Deucher
commit 0f55db36d49d45b80eff0c0a2a498766016f458b upstream. Otherwise the driver may try and send audio which may confuse the monitor. v2: set pin to NULL if no audio v3: avoid crash with analog encoders Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-13drm/radeon/audio: don't enable packets until the endAlex Deucher
commit 362ff251390f3d1f8fe94666f4fc4e5876381114 upstream. Don't enable the audio and avi infoframes and audio stream until all the state is set up. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-13drm/radeon: drop dce6_dp_enableAlex Deucher
commit 12428327bbd1180b5d8ef83fdf9482b878d0502a upstream. It's mostly duplicated with evergreen_dp_enable. This is a prerequisite for fix implemented in another patch. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-13drm/radeon: fix ordering of AVI packet setupAlex Deucher
commit 304f07e9c8d302cf3183248cbabb40598eb5b732 upstream. Set the line first, then enable the stream. May fix pink line problems on some displays. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06drm/i915: cope with large i2c transfersDmitry Torokhov
commit 9535c4757b881e06fae72a857485ad57c422b8d2 upstream. The hardware, according to the specs, is limited to 256 byte transfers, and current driver has no protections in case users attempt to do larger transfers. The code will just stomp over status register and mayhem ensues. Let's split larger transfers into digestable chunks. Doing this allows Atmel MXT driver on Pixel 1 function properly (it hasn't since commit 9d8dc3e529a19e427fd379118acd132520935c5d "Input: atmel_mxt_ts - implement T44 message handling" which tries to consume multiple touchscreen/touchpad reports in a single transaction). Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06drm/i915: vlv: fix save/restore of GFX_MAX_REQ_COUNT regImre Deak
commit b5f1c97f944482e98e6e39208af356630389d1ea upstream. Due this typo we don't save/restore the GFX_MAX_REQ_COUNT register across suspend/resume, so fix this. This was introduced in commit ddeea5b0c36f3665446518c609be91f9336ef674 Author: Imre Deak <imre.deak@intel.com> Date: Mon May 5 15:19:56 2014 +0300 drm/i915: vlv: add runtime PM support I noticed this only by reading the code. To my knowledge it shouldn't cause any real problems at the moment, since the power well backing this register remains on across a runtime s/r. This may change once system-wide s0ix functionality is enabled in the kernel. v2: - resend after a missing git add -u :/ Signed-off-by: Imre Deak <imre.deak@intel.com> Tested-By: PRC QA PRTS (Patch Regression Test System Contact: shuang.he@intel.com) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06drm: adv7511: Fix nested sleep when reading EDIDLaurent Pinchart
commit a5241289c4139f0521b89e34a70f5f998463ae15 upstream. The EDID read code waits for the read completion interrupt to occur using wait_event_interruptible(). The condition passed to the macro reads I2C registers. This results in sleeping with the task state set to TASK_INTERRUPTIBLE, triggering a WARN_ON() introduced in commit 8eb23b9f35aae ("sched: Debug nested sleeps"). Fix this by reworking the EDID read code. Instead of checking whether the read is complete through I2C reads, handle the interrupt registers in the interrupt handler and update a new edid_read flag accordingly. As a side effect both the IRQ and polling code paths now process the interrupt sources through the same code path, simplifying the code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06drm: adv7511: Fix DDC error interrupt handlingLaurent Pinchart
commit 2e96206c4f952295e11c311fbb2a7aa2105024af upstream. The DDC error interrupt bit is located in REG_INT1, not REG_INT0. Update both the interrupt wait code and the interrupt sources reset code accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06drm/i915: Dont enable CS_PARSER_ERROR interrupts at allDaniel Vetter
commit 37ef01ab5d24d1d520dc79f6a98099d451c2a901 upstream. We stopped handling them in commit aaecdf611a05cac26a94713bad25297e60225c29 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Nov 4 15:52:22 2014 +0100 drm/i915: Stop gathering error states for CS error interrupts but just clearing is apparently not enough: A sufficiently dead gpu left behind by firmware (*cough* coreboot *cough*) can keep the gpu in an endless loop of such interrupts, eventually leading to the nmi firing. And definitely to what looks like a machine hang. Since we don't even enable these interrupts on gen5+ let's do the same on earlier platforms. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93171 Tested-by: Mono <mono-for-kernel-org@donderklumpen.de> Tested-by: info@gluglug.org.uk Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06drm/exynos: Enable DP clock to fix display on Exynos5250 and otherKrzysztof Kozlowski
commit 1c363c7cccf64128087002b0779986ad16aff6dc upstream. After adding display power domain for Exynos5250 in commit 2d2c9a8d0a4f ("ARM: dts: add display power domain for exynos5250") the display on Chromebook Snow and others stopped working after boot. The reason for this suggested Andrzej Hajda: the DP clock was disabled. This clock is required by Display Port and is enabled by bootloader. However when FIMD driver probing was deferred, the display power domain was turned off. This effectively reset the value of DP clock enable register. When exynos-dp is later probed, the clock is not enabled and display is not properly configured: exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok exynos-dp 145b0000.dp-controller: unable to config video Fixes: 2d2c9a8d0a4f ("ARM: dts: add display power domain for exynos5250") Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reported-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06drm/radeon: fix doublescan modes (v2)Alex Deucher
commit fd99a0943ffaa0320ea4f69d09ed188f950c0432 upstream. Use the correct flags for atom. v2: handle DRM_MODE_FLAG_DBLCLK Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-09Merge tag 'drm-intel-fixes-2015-04-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes three commits, all cc: stable, to address Baytrail suspend/resume issues. * tag 'drm-intel-fixes-2015-04-08' of git://anongit.freedesktop.org/drm-intel: drm/i915/vlv: remove wait for previous GFX clk disable request drm/i915/chv: Remove Wait for a previous gfx force-off drm/i915/vlv: save/restore the power context base reg
2015-04-08drm: fix drm_mode_getconnector() locking imbalance regressionTommi Rantala
Regression in commit 2caa80e72b57c6216aec6f6a11fcfb4fec46daa0 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Feb 22 11:38:36 2015 +0100 drm: Fix deadlock due to getconnector locking changes If the drm_connector_find() call returns NULL, we should no longer call drm_modeset_unlock() to avoid locking imbalance. Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-04-07drm/i915/vlv: remove wait for previous GFX clk disable requestJesse Barnes
Looks like it was introduced in: commit 650ad970a39f8b6164fe8613edc150f585315289 Author: Imre Deak <imre.deak@intel.com> Date: Fri Apr 18 16:35:02 2014 +0300 drm/i915: vlv: factor out vlv_force_gfx_clock and check for pending force-of but I'm not sure why. It has caused problems for us in the past (see 85250ddff7a6 "drm/i915/chv: Remove Wait for a previous gfx force-off" and 8d4eee9cd7a1 "drm/i915: vlv: increase timeout when forcing on the GFX clock") and doesn't seem to be required, so let's just drop it. References: https://bugs.freedesktop.org/show_bug.cgi?id=89611 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Cc: stable@vger.kernel.org # c9c52e24194a: drm/i915/chv: Remove Wait ... Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-04-07drm/i915/chv: Remove Wait for a previous gfx force-offDeepak S
On CHV, PUNIT team confirmed that 'VLV_GFX_CLK_STATUS_BIT' is not a sticky bit and it will always be set. So ignore Check for previous Gfx force off during suspend and allow the force clk as part S0ix Sequence Signed-off-by: Deepak S <deepak.s@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-04-07drm/i915/vlv: save/restore the power context base regJesse Barnes
Some BIOSes (e.g. the one on the Minnowboard) don't save/restore this reg. If it's unlocked, we can just restore the previous value, and if it's locked (in case the BIOS re-programmed it for us) the write will be ignored and we'll still have "did it move" sanity check in the PM code to warn us if something is still amiss. References: https://bugs.freedesktop.org/show_bug.cgi?id=89611 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Darren Hart <dvhart@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-04-03Merge branch 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Just two small fixes for radeon, both destined for stable. * 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix wait in radeon_mn_invalidate_range_start drm/radeon: add extra check in radeon_ttm_tt_unpin_userptr
2015-04-03Merge branch 'exynos-drm-fixes' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Fix display on issue to Exynos5250 based Snow(1366x768) board. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm: Exynos: Respect framebuffer pitch for FIMD/Mixer
2015-04-03Merge tag 'drm-intel-fixes-2015-04-02' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes one oops fixes and a 0-length allocation fix from next backported. * tag 'drm-intel-fixes-2015-04-02' of git://anongit.freedesktop.org/drm-intel: drm/i915: Reject the colorkey ioctls for primary and cursor planes drm/i915: Skip allocating shadow batch for 0-length batches
2015-04-03Merge tag 'topic/drm-fixes-2015-04-02' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Here's a single drm core fix, cc: stable, that affects i915 users. * tag 'topic/drm-fixes-2015-04-02' of git://anongit.freedesktop.org/drm-intel: drm/edid: set ELD for firmware and debugfs override EDIDs
2015-04-02drm/radeon: fix wait in radeon_mn_invalidate_range_startChristian König
We need to wait for all fences, not just the exclusive one. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-04-02drm/radeon: add extra check in radeon_ttm_tt_unpin_userptrChristian König
We somehow try to free the SG table twice. Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=89734 Signed-off-by: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-04-02drm: Exynos: Respect framebuffer pitch for FIMD/MixerDaniel Stone
When performing a modeset, use the framebuffer pitch value to set FIMD IMG_SIZE and Mixer SPAN registers. These are both defined as pitch - the distance between contiguous lines (bytes for FIMD, pixels for mixer). Fixes display on Snow (1366x768). Signed-off-by: Daniel Stone <daniels@collabora.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-04-02drm/i915: Reject the colorkey ioctls for primary and cursor planesVille Syrjälä
The legcy colorkey ioctls are only implemented for sprite planes, so reject the ioctl for primary/cursor planes. If we want to support colorkeying with these planes (assuming we have hw support of course) we should just move ahead with the colorkey property conversion. Testcase: kms_legacy_colorkey Cc: Tommi Rantala <tt.rantala@gmail.com> Cc: stable@vger.kernel.org Reference: http://mid.gmane.org/CA+ydwtr+bCo7LJ44JFmUkVRx144UDFgOS+aJTfK6KHtvBDVuAw@mail.gmail.com Reported-and-tested-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-30drm/i915: Skip allocating shadow batch for 0-length batchesChris Wilson
Since commit 17cabf571e50677d980e9ab2a43c5f11213003ae Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jan 14 11:20:57 2015 +0000 drm/i915: Trim the command parser allocations we may then try to allocate a zero-sized object and attempt to extract its pages. Understandably this fails. Note that the real offender seems to be commit b9ffd80ed659c559152c042e74741f4f60cac691 Author: Brad Volkin <bradley.d.volkin@intel.com> Date: Thu Dec 11 12:13:10 2014 -0800 drm/i915: Use batch length instead of object size in command parser Testcase: igt/gem_exec_nop #ivb,byt,hsw Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [cherry picked from commit 743e78c1d726d875b98ff9689cc77c4d3d5d9ae2 from drm-intel-next because 4.0 seems to be affected by this too, despite that the obvious culprit is definitely not in 4.0. Whatever, if fixes a bug. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-03-27drm/radeon: programm the VCE fw BAR as wellChristian König
Otherwise the VCE firmware needs to be in the first 256MB of VRAM. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-27drm/radeon: always dump the ring content if it's availableChristian König
Dumping is still possible if a ring isn't ready, only when it isn't allocated at all we need to abort here. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-27radeon: Do not directly dereference pointers to BIOS area.David Miller
Use readb() and memcpy_fromio() accessors instead. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-03-27drm/radeon/dpm: fix 120hz handling harderAlex Deucher
Need to expand the check to handle short circuiting if the selected state is the same as current state. bug: https://bugs.freedesktop.org/show_bug.cgi?id=87796 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-03-27drm/edid: set ELD for firmware and debugfs override EDIDsJani Nikula
If the user supplies EDID through firmware or debugfs override, the driver callbacks are bypassed and the connector ELD does not get updated, and audio fails. Set ELD for firmware and debugfs EDIDs too. There should be no harm in gratuitously doing this for non HDMI/DP connectors, as it's still up to the driver to use the ELD, if any. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82349 Reference: https://bugs.freedesktop.org/show_bug.cgi?id=80691 Reported-by: Emil <emilsvennesson@gmail.com> Reported-by: Rob Engle <grenoble@gmail.com> Tested-by: Jolan Luff <jolan@gormsby.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-26drm/i915: Fixup legacy plane->crtc link for initial fb configDaniel Vetter
This is a very similar bug in the load detect code fixed in commit 9128b040eb774e04bc23777b005ace2b66ab2a85 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Mar 3 17:31:21 2015 +0100 drm/i915: Fix modeset state confusion in the load detect code But this time around it was the initial fb code that forgot to update the plane->crtc pointer. Otherwise it's the exact same bug, with the exact same restrains (any set_config call/ioctl that doesn't disable the pipe papers over the bug for free, so fairly hard to hit in normal testing). So if you want the full explanation just go read that one over there - it's rather long ... Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reported-and-tested-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [Jani: backported to drm-intel-fixes for v4.0-rc] Reference: http://mid.gmane.org/CA+5PVA7ChbtJrknqws1qvZcbrg1CW2pQAFkSMURWWgyASRyGXg@mail.gmail.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-26drm/i915: Fix atomic state when reusing the firmware fbDamien Lespiau
Right now, we get a warning when taking over the firmware fb: [drm:drm_atomic_plane_check] FB set but no CRTC with the following backtrace: [<ffffffffa010339d>] drm_atomic_check_only+0x35d/0x510 [drm] [<ffffffffa0103567>] drm_atomic_commit+0x17/0x60 [drm] [<ffffffffa00a6ccd>] drm_atomic_helper_plane_set_property+0x8d/0xd0 [drm_kms_helper] [<ffffffffa00f1fed>] drm_mode_plane_set_obj_prop+0x2d/0x90 [drm] [<ffffffffa00a8a1b>] restore_fbdev_mode+0x6b/0xf0 [drm_kms_helper] [<ffffffffa00aa969>] drm_fb_helper_restore_fbdev_mode_unlocked+0x29/0x80 [drm_kms_helper] [<ffffffffa00aa9e2>] drm_fb_helper_set_par+0x22/0x50 [drm_kms_helper] [<ffffffffa050a71a>] intel_fbdev_set_par+0x1a/0x60 [i915] [<ffffffff813ad444>] fbcon_init+0x4f4/0x580 That's because we update the plane state with the fb from the firmware, but we never associate the plane to that CRTC. We don't quite have the full DRM take over from HW state just yet, so fake enough of the plane atomic state to pass the checks. v2: Fix the state on which we set the CRTC in the case we're sharing the initial fb with another pipe. (Matt) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [Jani: backported to drm-intel-fixes for v4.0-rc] Reference: http://mid.gmane.org/CA+5PVA7yXH=U757w8V=Zj2U1URG4nYNav20NpjtQ4svVueyPNw@mail.gmail.com Reference: http://lkml.kernel.org/r/CA+55aFweWR=nDzc2Y=rCtL_H8JfdprQiCimN5dwc+TgyD4Bjsg@mail.gmail.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-26drm/i915: Keep ring->active_list and ring->requests_list consistentChris Wilson
If we retire requests last, we may use a later seqno and so clear the requests lists without clearing the active list, leading to confusion. Hence we should retire requests first for consistency with the early return. The order used to be important as the lifecycle for the object on the active list was determined by request->seqno. However, the requests themselves are now reference counted removing the constraint from the order of retirement. Fixes regression from commit 1b5a433a4dd967b125131da42b89b5cc0d5b1f57 Author: John Harrison <John.C.Harrison@Intel.com> Date: Mon Nov 24 18:49:42 2014 +0000 drm/i915: Convert 'i915_seqno_passed' calls into 'i915_gem_request_completed ' and a WARNING: CPU: 0 PID: 1383 at drivers/gpu/drm/i915/i915_gem_evict.c:279 i915_gem_evict_vm+0x10c/0x140() WARN_ON(!list_empty(&vm->active_list)) Identified by updating WATCH_LISTS: [drm:i915_verify_lists] *ERROR* blitter ring: active list not empty, but no requests WARNING: CPU: 0 PID: 681 at drivers/gpu/drm/i915/i915_gem.c:2751 i915_gem_retire_requests_ring+0x149/0x230() WARN_ON(i915_verify_lists(ring->dev)) Note that this is only a problem in evict_vm where the following happens after a retire_request has cleaned out all requests, but not all active bo: - intel_ring_idle called from i915_gpu_idle notices that no requests are outstanding and immediately returns. - i915_gem_retire_requests_ring called from i915_gem_retire_requests also immediately returns when there's no request, still leaving the bo on the active list. - evict_vm hits the WARN_ON(!list_empty(&vm->active_list)) after evicting all active objects that there's still stuff left that shouldn't be there. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-25drm/i915: Don't try to reference the fb in get_initial_plane_config()Damien Lespiau
Tvrtko noticed a new warning on boot: WARNING: CPU: 1 PID: 353 at include/linux/kref.h:47 drm_framebuffer_reference+0x6c/0x80 [drm]() Call Trace: [<ffffffff8161f10c>] dump_stack+0x4f/0x7b [<ffffffff81052caa>] warn_slowpath_common+0xaa/0xd0 [<ffffffff81052d8a>] warn_slowpath_null+0x1a/0x20 [<ffffffffa00d035c>] drm_framebuffer_reference+0x6c/0x80 [drm] [<ffffffffa01c0df7>] update_state_fb.isra.54+0x47/0x50 [i915] [<ffffffffa01ccd5c>] skylake_get_initial_plane_config+0x93c/0x950 [i915] [<ffffffffa01e8721>] intel_modeset_init+0x1551/0x17c0 [i915] [<ffffffffa02476e0>] i915_driver_load+0xed0/0x11e0 [i915] [<ffffffff81627aa1>] ? _raw_spin_unlock_irqrestore+0x51/0x70 [<ffffffffa00ca8b7>] drm_dev_register+0x77/0x110 [drm] [<ffffffffa00cda3b>] drm_get_pci_dev+0x11b/0x1f0 [drm] [<ffffffff81098e3d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81627aa1>] ? _raw_spin_unlock_irqrestore+0x51/0x70 [<ffffffffa0145276>] i915_pci_probe+0x56/0x60 [i915] [<ffffffff813ad59c>] pci_device_probe+0x7c/0x100 [<ffffffff81466aad>] driver_probe_device+0x16d/0x380 We cannot take a reference at this point, not before intel_framebuffer_init() and the underlying drm_framebuffer_init(). Introduced in: commit 706dc7b549175e47f23e913b7f1e52874a7d0f56 Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Feb 3 13:10:04 2015 -0800 drm/i915: Ensure plane->state->fb stays in sync with plane->fb v2: Don't move update_state_fb(). It was moved around because I originally put update_state_fb() in intel_alloc_plane_obj() before finding a better place. (Matt) Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From drm-next: (cherry picked from commit f55548b5af87ebfc586ca75748947f1c1b1a4a52) Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-03-24drm: Fixup racy refcounting in plane_force_disableDaniel Vetter
Originally it was impossible to be dropping the last refcount in this function since there was always one around still from the idr. But in commit 83f45fc360c8e16a330474860ebda872d1384c8c Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Aug 6 09:10:18 2014 +0200 drm: Don't grab an fb reference for the idr we've switched to weak references, broke that assumption but forgot to fix it up. Since we still force-disable planes it's only possible to hit this when racing multiple rmfb with fbdev restoring or similar evil things. As long as userspace is nice it's impossible to hit the BUG_ON. But the BUG_ON would most likely be hit from fbdev code, which usually invovles the console_lock besides all modeset locks. So very likely we'd never get the bug reports if this was hit in the wild, hence better be safe than sorry and backport. Spotted by Matt Roper while reviewing other patches. [airlied: pull this back into 4.0 - the oops happens there] Cc: stable@vger.kernel.org Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-03-20Merge tag 'drm-intel-fixes-2015-03-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Backporting a couple of plane related fixes from drm-next to v4.0. * tag 'drm-intel-fixes-2015-03-19' of git://anongit.freedesktop.org/drm-intel: drm/i915: Make sure the primary plane is enabled before reading out the fb state drm/i915: Ensure plane->state->fb stays in sync with plane->fb
2015-03-20Merge tag 'drm-amdkfd-fixes-2015-03-19' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-fixes - Fixing SDMA initialization when in non-HWS mode (debug mode) - Memory leak fix when destroying kernel queue - Fix number of available compute pipelines according to new firmware * tag 'drm-amdkfd-fixes-2015-03-19' of git://people.freedesktop.org/~gabbayo/linux: drm/radeon: Changing number of compute pipe lines drm/amdkfd: Fix SDMA queue init. in non-HWS mode drm/amdkfd: destroy mqd when destroying kernel queue
2015-03-19Merge branch 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes single radeon fix. * 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: drop ttm two ended allocation
2015-03-19Merge branch 'exynos-drm-fixes' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Some urgent regression fixes to booting failures Exynos DRM occured. Summary: - Fix two urgent null pointer dereference bugs in case of enabling or disabling IOMMU. There was two cases to these issues. One is that plane->crtc is accessed by exynos_disable_plane() when device tree binding is broken so device driver tries to release, which means that the mode set operation isn't invoked yet so plane->crtc is still NULL and exynos_disable_plane() will access NULL pointer. This issue is fixed by checking if the plane->crtc is NULL or not in exynos_disable_plane() Other is that fimd_wait_for_vblank() is called to avoid from page fault with IOMMU before the ctx object is created. At this time, fimd_wait_for_vblank() tries to access ctx->crtc but the ctx->crtc is still NULL because exynos_drm_crtc_create() isn't called yet. This issue is fixed by creating a crtc object and setting it to ctx->crtc prior to fimd_wait_for_vblank() call. For more details, you can refer to below an e-mail thread, http://www.spinics.net/lists/linux-samsung-soc/msg42436.html - Remove unnecessary file not used and fix trivial issues. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: fix the initialization order in FIMD drm/exynos: fix typo config name correctly. drm/exynos: Check for NULL dereference of crtc drm/exynos: IS_ERR() vs NULL bug drm/exynos: remove unused files
2015-03-18drm/radeon: drop ttm two ended allocationAlex Deucher
radeon_bo_create() calls radeon_ttm_placement_from_domain() before ttm_bo_init() is called. radeon_ttm_placement_from_domain() uses the ttm bo size to determine when to select top down allocation but since the ttm bo is not initialized yet the check is always false. It only took effect when buffers were validated later. It also seemed to regress suspend and resume on some systems possibly due to it not taking effect in radeon_bo_create(). radeon_bo_create() and radeon_ttm_placement_from_domain() need to be reworked substantially for this to be optimally effective. Re-enable it at that point. Noticed-by: Oded Gabbay <oded.gabbay@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-03-18drm/exynos: fix the initialization order in FIMDHyungwon Hwang
Since commit 0f04cf8df0b20a97369cb634663fef0578cbf273 ("drm/exynos: fix wrong pipe calculation for crtc"), fimd_clear_channel() can be called when is_drm_iommu_supported() returns true. In this case, the kernel is going to be panicked because crtc is not set yet. [ 1.211156] [drm] Initialized drm 1.1.0 20060810 [ 1.216785] Unable to handle kernel NULL pointer dereference at virtual address 00000350 [ 1.223415] pgd = c0004000 [ 1.226086] [00000350] *pgd=00000000 [ 1.229649] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 1.234940] Modules linked in: [ 1.237982] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.0.0-rc1-00062-g7a7cc79-dirty #123 [ 1.246136] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 1.252214] task: ee8c8000 ti: ee8d0000 task.ti: ee8d0000 [ 1.257606] PC is at fimd_wait_for_vblank+0x8/0xc8 [ 1.262370] LR is at fimd_bind+0x138/0x1a8 [ 1.266450] pc : [<c02fb63c>] lr : [<c02fb834>] psr: 20000113 [ 1.266450] sp : ee8d1d28 ip : 00000000 fp : 00000000 [ 1.277906] r10: 00000001 r9 : c09d693c r8 : c0a2d6a8 [ 1.283114] r7 : 00000034 r6 : 00000001 r5 : ee0bb400 r4 : ee244c10 [ 1.289624] r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : 00000000 [ 1.296135] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.303426] Control: 10c5387d Table: 4000404a DAC: 00000015 [ 1.309154] Process swapper/0 (pid: 1, stack limit = 0xee8d0210) [ 1.315143] Stack: (0xee8d1d28 to 0xee8d2000) [ 1.319486] 1d20: 00000000 c0113d18 ee0bb400 ee0bb400 ee245c30 eebbe210 [ 1.327645] 1d40: ee008a40 ee244c10 ee0bb400 00000001 00000034 c02fb834 00000000 c030a858 [ 1.335804] 1d60: ee244a10 eeb60780 ee008a40 eeb60740 ee0bb400 c03030d0 00000000 00000000 [ 1.343963] 1d80: ee244a10 ee0bb400 00000000 eeb60740 eeb60810 00000000 00000000 c02f6ba4 [ 1.352123] 1da0: ee0bb400 00000000 00000000 c02e0500 ee244a00 c0a04a14 ee0bb400 c02e1de4 [ 1.360282] 1dc0: 00000000 c030a858 00000002 eeb60820 eeb60820 00000002 eeb60780 c03033d4 [ 1.368441] 1de0: c06e9cec 00000000 ee244a10 eeb60780 c0a056f8 c03035fc c0a04b24 c0a04b24 [ 1.376600] 1e00: ee244a10 00000001 c0a049d0 c02f6d34 c0ad462c eeba0790 00000000 ee244a10 [ 1.384759] 1e20: ffffffed c0a049d0 00000000 c03090b0 ee244a10 c0ad462c c0a2d840 c03077a0 [ 1.392919] 1e40: eeb5e880 c024b738 000008db ee244a10 c0a049d0 ee244a44 00000000 c09e71d8 [ 1.401078] 1e60: 000000c6 c0307a6c c0a049d0 00000000 c03079e0 c0305ea8 ee826e5c ee1dc7b4 [ 1.409237] 1e80: c0a049d0 eeb5e880 c0a058a8 c0306e2c c0896204 c0a049d0 c06e9d10 c0a049d0 [ 1.417396] 1ea0: c06e9d10 c0ad4600 00000000 c0308360 00000000 00000003 c06e9d10 c02f6e14 [ 1.425555] 1ec0: 00000000 c0896204 ffffffff 00000000 00000000 00000000 00000000 00000000 [ 1.433714] 1ee0: 00000000 00000000 c02f6d5c c02f6d5c 00000000 eeb5d740 c09e71d8 c0008a30 [ 1.441874] 1f00: ef7fca5e 00000000 00000000 00000066 00000000 ee8d1f28 c003ff1c c02514e8 [ 1.450033] 1f20: 60000113 ffffffff c093906c ef7fca5e 000000c6 c004018c 00000000 c093906c [ 1.458192] 1f40: c08a9690 c093840c 00000006 00000006 c09eb2ac c09c0d74 00000006 c09c0d54 [ 1.466351] 1f60: c0a3d680 c09745a0 c09d693c 000000c6 00000000 c0974db4 00000006 00000006 [ 1.474510] 1f80: c09745a0 ffffffff 00000000 c0692e00 00000000 00000000 00000000 00000000 [ 1.482669] 1fa0: 00000000 c0692e08 00000000 c000f040 00000000 00000000 00000000 00000000 [ 1.490828] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.498988] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [ 1.507159] [<c02fb63c>] (fimd_wait_for_vblank) from [<c02fb834>] (fimd_bind+0x138/0x1a8) [ 1.515313] [<c02fb834>] (fimd_bind) from [<c03030d0>] (component_bind_all+0xc4/0x20c) [ 1.523209] [<c03030d0>] (component_bind_all) from [<c02f6ba4>] (exynos_drm_load+0xa0/0x140) [ 1.531632] [<c02f6ba4>] (exynos_drm_load) from [<c02e0500>] (drm_dev_register+0xa0/0xf4) [ 1.539788] [<c02e0500>] (drm_dev_register) from [<c02e1de4>] (drm_platform_init+0x44/0xcc) [ 1.548121] [<c02e1de4>] (drm_platform_init) from [<c03033d4>] (try_to_bring_up_master.part.1+0xc8/0x104) [ 1.557668] [<c03033d4>] (try_to_bring_up_master.part.1) from [<c03035fc>] (component_master_add_with_match+0xd0/0x118) [ 1.568431] [<c03035fc>] (component_master_add_with_match) from [<c02f6d34>] (exynos_drm_platform_probe+0xf0/0x118) [ 1.578847] [<c02f6d34>] (exynos_drm_platform_probe) from [<c03090b0>] (platform_drv_probe+0x48/0x98) [ 1.588052] [<c03090b0>] (platform_drv_probe) from [<c03077a0>] (driver_probe_device+0x140/0x380) [ 1.596902] [<c03077a0>] (driver_probe_device) from [<c0307a6c>] (__driver_attach+0x8c/0x90) [ 1.605321] [<c0307a6c>] (__driver_attach) from [<c0305ea8>] (bus_for_each_dev+0x54/0x88) [ 1.613480] [<c0305ea8>] (bus_for_each_dev) from [<c0306e2c>] (bus_add_driver+0xec/0x200) [ 1.621640] [<c0306e2c>] (bus_add_driver) from [<c0308360>] (driver_register+0x78/0xf4) [ 1.629625] [<c0308360>] (driver_register) from [<c02f6e14>] (exynos_drm_init+0xb8/0x11c) [ 1.637785] [<c02f6e14>] (exynos_drm_init) from [<c0008a30>] (do_one_initcall+0xac/0x1ec) [ 1.645950] [<c0008a30>] (do_one_initcall) from [<c0974db4>] (kernel_init_freeable+0x194/0x268) [ 1.654626] [<c0974db4>] (kernel_init_freeable) from [<c0692e08>] (kernel_init+0x8/0xe4) [ 1.662699] [<c0692e08>] (kernel_init) from [<c000f040>] (ret_from_fork+0x14/0x34) [ 1.670246] Code: eaffffd5 c09df884 e92d40f0 e24dd01c (e5905350) [ 1.676408] ---[ end trace 804468492f306a6f ]--- [ 1.680948] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.680948] [ 1.690035] CPU1: stopping [ 1.692727] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.0.0-rc1-00062-g7a7cc79-dirty #123 [ 1.702097] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 1.708192] [<c0016c84>] (unwind_backtrace) from [<c00129bc>] (show_stack+0x10/0x14) [ 1.715908] [<c00129bc>] (show_stack) from [<c0696f58>] (dump_stack+0x78/0xc8) [ 1.723108] [<c0696f58>] (dump_stack) from [<c0015020>] (handle_IPI+0x16c/0x2b4) [ 1.730485] [<c0015020>] (handle_IPI) from [<c00086bc>] (gic_handle_irq+0x64/0x6c) [ 1.738036] [<c00086bc>] (gic_handle_irq) from [<c00134c0>] (__irq_svc+0x40/0x74) [ 1.745498] Exception stack(0xee8fdf98 to 0xee8fdfe0) [ 1.750533] df80: 00000000 00000000 [ 1.758695] dfa0: ee8fdfe8 c0021780 c09df938 00000015 10c0387d c0a3d988 4000406a c09df8d4 [ 1.766853] dfc0: c0a27a74 c09df940 01000000 ee8fdfe0 c00101c0 c00101c4 60000113 ffffffff [ 1.775015] [<c00134c0>] (__irq_svc) from [<c00101c4>] (arch_cpu_idle+0x30/0x3c) [ 1.782397] [<c00101c4>] (arch_cpu_idle) from [<c005e804>] (cpu_startup_entry+0x180/0x324) [ 1.790639] [<c005e804>] (cpu_startup_entry) from [<40008764>] (0x40008764) [ 1.797579] CPU0: stopping [ 1.800272] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 4.0.0-rc1-00062-g7a7cc79-dirty #123 [ 1.809642] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 1.815730] [<c0016c84>] (unwind_backtrace) from [<c00129bc>] (show_stack+0x10/0x14) [ 1.823450] [<c00129bc>] (show_stack) from [<c0696f58>] (dump_stack+0x78/0xc8) [ 1.830653] [<c0696f58>] (dump_stack) from [<c0015020>] (handle_IPI+0x16c/0x2b4) [ 1.838030] [<c0015020>] (handle_IPI) from [<c00086bc>] (gic_handle_irq+0x64/0x6c) [ 1.845581] [<c00086bc>] (gic_handle_irq) from [<c00134c0>] (__irq_svc+0x40/0x74) [ 1.853043] Exception stack(0xc09ddf60 to 0xc09ddfa8) [ 1.858081] df60: 00000000 00000000 c09ddfb0 c0021780 c09df938 00000001 ffffffff c0a3d680 [ 1.866239] df80: c09c0dec c09df8d4 c0a27a74 c09df940 01000000 c09ddfa8 c00101c0 c00101c4 [ 1.874396] dfa0: 60000113 ffffffff [ 1.877872] [<c00134c0>] (__irq_svc) from [<c00101c4>] (arch_cpu_idle+0x30/0x3c) [ 1.885251] [<c00101c4>] (arch_cpu_idle) from [<c005e804>] (cpu_startup_entry+0x180/0x324) [ 1.893499] [<c005e804>] (cpu_startup_entry) from [<c0974bc8>] (start_kernel+0x324/0x37c) [ 1.901655] [<c0974bc8>] (start_kernel) from [<40008074>] (0x40008074) [ 1.908161] CPU3: stopping [ 1.910855] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 4.0.0-rc1-00062-g7a7cc79-dirty #123 [ 1.920225] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 1.926313] [<c0016c84>] (unwind_backtrace) from [<c00129bc>] (show_stack+0x10/0x14) [ 1.934034] [<c00129bc>] (show_stack) from [<c0696f58>] (dump_stack+0x78/0xc8) [ 1.941237] [<c0696f58>] (dump_stack) from [<c0015020>] (handle_IPI+0x16c/0x2b4) [ 1.948613] [<c0015020>] (handle_IPI) from [<c00086bc>] (gic_handle_irq+0x64/0x6c) [ 1.956165] [<c00086bc>] (gic_handle_irq) from [<c00134c0>] (__irq_svc+0x40/0x74) [ 1.963626] Exception stack(0xee901f98 to 0xee901fe0) [ 1.968661] 1f80: 00000000 00000000 [ 1.976823] 1fa0: ee901fe8 c0021780 c09df938 00000015 10c0387d c0a3d988 4000406a c09df8d4 [ 1.984982] 1fc0: c0a27a74 c09df940 01000000 ee901fe0 c00101c0 c00101c4 60000113 ffffffff [ 1.993143] [<c00134c0>] (__irq_svc) from [<c00101c4>] (arch_cpu_idle+0x30/0x3c) [ 2.000522] [<c00101c4>] (arch_cpu_idle) from [<c005e804>] (cpu_startup_entry+0x180/0x324) [ 2.008765] [<c005e804>] (cpu_startup_entry) from [<40008764>] (0x40008764) [ 2.015710] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-03-18drm/exynos: fix typo config name correctly.Inki Dae
This patch fixes DRM_EXYNOS7DECON to DRM_EXYNOS7_DECON. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-03-18drm/exynos: Check for NULL dereference of crtcCharles Keepax
The commit "drm/exynos: remove exynos_plane_dpms" (d9ea6256) removed the use of the enabled flag, which means that the code may attempt to call win_enable on a NULL crtc. This results in the following oops on Arndale: [ 1.673479] Unable to handle kernel NULL pointer dereference at virtual address 00000368 [ 1.681500] pgd = c0004000 [ 1.684154] [00000368] *pgd=00000000 [ 1.687713] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 1.693012] Modules linked in: [ 1.696045] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.19.0-07545-g57485fa #1907 [ 1.703524] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) (....) [ 2.014803] [<c02f9cfc>] (exynos_plane_destroy) from [<c02e61b4>] (drm_mode_config_cleanup+0x168/0x20c) [ 2.024178] [<c02e61b4>] (drm_mode_config_cleanup) from [<c02f66fc>] (exynos_drm_load+0xac/0x12c) This patch adds in a check to ensure exynos_crtc is not NULL before it is dereferenced. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-23 13:53:27 +0000