summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2012-08-30drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222SPaul Menzel
Connecting an ASUS VW222S [1] over VGA a garbled screen is shown with vertical stripes in the top half. In commit bc42aabc [2] commit bc42aabc6a01b92b0f961d65671564e0e1cd7592 Author: Adam Jackson <ajax@redhat.com> Date: Wed May 23 16:26:54 2012 -0400 drm/edid/quirks: ViewSonic VA2026w Adam Jackson added the quirk `EDID_QUIRK_FORCE_REDUCED_BLANKING` which is also needed for this ASUS monitor. All log files and output from `xrandr` is included in the referenced Bugzilla report #17629. Please note that this monitor only has a VGA (D-Sub) connector [1]. [1] http://www.asus.com/Display/LCD_Monitors/VW222S/ [2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=bc42aabc6a01b92b0f961d65671564e0e1cd7592 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17629 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Cc: <dri-devel@lists.freedesktop.org> Cc: Adam Jackson <ajax@redhat.com> Cc: Ian Pilcher <arequipeno@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-30Merge branch 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Alex writes: Highlights: - fix a gart regression on older IGP chips - more MSAA fixes - fix a double free in gpu reset code - modesetting fixes - trinity dig encoder fix. * 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix dig encoder selection on DCE61 drm/radeon: fix double free in radeon_gpu_reset drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740 drm/radeon: rework panel mode setup drm/radeon/atom: powergating fixes for DCE6 drm/radeon/atom: rework DIG modesetting on DCE3+ drm/radeon: don't disable plls that are in use by other crtcs drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700 drm/radeon: initialize tracked CS state drm/radeon: fix reading CB_COLORn_MASK from the CS
2012-08-30gma500: Consider CRTC initially active.Forest Bond
[this one ideally should make 3.6 - it fixes the very annoying mode setting bug] This causes the pipe to be forced off prior to initial mode set, which roughly mirrors the behavior of the i915 driver. It fixes initial mode setting on my Intel DN2800MT (Cedarview) board. Without it, mode setting triggers an out-of-range error from the monitor for most modes, but only on initial configuration (i.e. they can be configured successfully from userspace after that). Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-29drm/radeon: fix dig encoder selection on DCE61Alex Deucher
Was using the DCE41 code which was wrong. Fixes blank displays on a number of Trinity systems. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-29drm/radeon: fix double free in radeon_gpu_resetChristian König
radeon_ring_restore is freeing the memory for the saved ring data. We need to remember that, otherwise we try to restore the ring data again on the next try. Additional to that it shouldn't try the reset infinitely if we have saved ring data. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740Jerome Glisse
It seems some of those IGP dislike non dma32 page despite what documentation says. Fix regression since we allowed non dma32 pages. It seems it only affect some revision of those IGP chips as we don't know which one just force dma32 for all of them. https://bugzilla.redhat.com/show_bug.cgi?id=785375 Signed-off-by: Jerome Glisse <jglisse@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29drm/radeon: rework panel mode setupAlex Deucher
Adjust the panel mode setup to match the behavior of the vbios. Rather than checking for specific bridge chip ids, just check the eDP configuration register. This saves extra aux transactions and works across DP bridge chips without requiring additional per chip id checking. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29drm/radeon/atom: powergating fixes for DCE6Alex Deucher
Power gating is per crtc pair, but the powergating registers should be called individually. The hw handles power up/down properly. The pair is powered up if either crtc in the pair is powered up and the pair is not powered down until both crtcs in the pair are powered down. This simplifies programming and should save additional power as the previous code never actually power gated the crtc pair. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-29drm/radeon/atom: rework DIG modesetting on DCE3+Alex Deucher
The ordering is important and the current drm code wasn't cutting it for modern DIG encoders. We need to have information about crtc before setting up the encoders so I've shifted the ordering a bit. Probably we'll need a full rework akin to danvet's recent intel patchs. This patch fixes numerous issues with DP bridge chips and makes link training much more reliable. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-29drm/radeon: don't disable plls that are in use by other crtcsAlex Deucher
Some plls are shared for DP. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
2012-08-29drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700Marek Olšák
Checking of the second colorbuffer was skipped on r700, because CB_TARGET_MASK was 0xf. With r600, CB_TARGET_MASK is changed to 0xff, so we must set the number of samples of the second colorbuffer to 1 in order to pass the CS checker. The DRM version is bumped, because RESOLVE_BOX is always rejected without this fix on r600. Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29drm/radeon: initialize tracked CS stateMarek Olšák
This should help catch uninitialized registers and reject commands because of that. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29drm/radeon: fix reading CB_COLORn_MASK from the CSMarek Olšák
Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: "Just a few smaller things: - Fix up a pipe vs. plane confusion from a refactoring, fixes a regression from 3.1 (Anhua Xu). - Fix ivb sprite pixel formats (Vijay). - Fixup ppgtt pde placement for machines where the Bios artifically limits the availbale gtt space in the name of ... product differentiation (Chris). This fixes an oops. - Yet another no_lvds quirk entry." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard drm/i915: Use the correct size of the GTT for placing the per-process entries drm/i915: fix color order for BGR formats on IVB drm/i915: fix wrong order of parameters in port checking functions
2012-08-29Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Ben says its just a single fix to avoid the wrong pcopy units being used. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nvc0/copy: check PUNITS to determine which copy engines are disabled
2012-08-29drm/nvc0/copy: check PUNITS to determine which copy engines are disabledBen Skeggs
On some Fermi chipsets (NVCE particularly) PCOPY1 doesn't exist. And if what I've seen on Kepler is true of Fermi too, chipsets of the same type can have different PCOPY units available. This should fix a v3.5 regression reported by a number of people effecting suspend/resume on NVC8/NVCE chipsets. Cc: stable@vger.kernel.org [3.5] Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-24i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboardCalvin Walton
This board is incorrectly detected as having an LVDS connector, resulting in the VGA output (the only available output on the board) showing the console only in the top-left 1024x768 pixels, and an extra LVDS connector appearing in X. It's a desktop Mini-ITX board using an Atom D525 CPU with an NM10 chipset. I've had this board for about a year, but this is the first time I noticed the issue because I've been running it headless for most of its life. Signed-off-by: Calvin Walton <calvin.walton@kepstin.ca>
2012-08-24drm/i915: Use the correct size of the GTT for placing the per-process entriesChris Wilson
The current layout is to place the per-process tables at the end of the GTT. However, this is currently using a hardcoded maximum size for the GTT and not taking in account limitations imposed by the BIOS. Use the value for the total number of entries allocated in the table as provided by the configuration registers. Reported-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Matthew Garret <mjg@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24drm: Check for invalid cursor flagsJakob Bornecrantz
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-23drm/i915: fix color order for BGR formats on IVBVijay Purushothaman
This is already fixed for ILK and SNB in the below commit but somehow IVB is missed. commit ab2f9df10dd955f1fc0a8650e377588c98f1c029 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Mon Feb 27 12:40:10 2012 -0800 drm/i915: fix color order for BGR formats on SNB Had the wrong bits and field definitions. Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-23drm/i915: fix wrong order of parameters in port checking functionsXu, Anhua
Wrong order of parameters passed-in when calling hdmi/adpa /lvds_pipe_enabled(), 2nd and 3rd parameters are reversed. This bug was indroduced by commit 1519b9956eb4b4180fa3f47c73341463cdcfaa37 Author: Keith Packard <keithp@keithp.com> Date: Sat Aug 6 10:35:34 2011 -0700 drm/i915: Fix PCH port pipe select in CPT disable paths The reachable tag for this commit is v3.1-rc1-3-g1519b99 Signed-off-by: Anhua Xu <anhua.xu@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44876 Tested-by: Daniel Schroeder <sec@dschroeder.info> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-22Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Intel: edid fixes, power consumption fix, s/r fix, haswell fix Radeon: BIOS loading fixes for UEFI and Thunderbolt machines, better MSAA validation, lockup timeout fixes, modesetting fixes One udl dpms fix, one vmwgfx fix, a couple of trivial core changes. There is an export added to ACPI as part of the radeon bios fixes. I've also included the fbcon flashing cursor vs deinit race fix, that seems the simplest place to start" Trivial conflict in drivers/video/console/fbcon.c due to me having already applied the fbcon flashing cursor vs deinit race fix, and Dave had added a comment in there too. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits) fbcon: fix race condition between console lock and cursor timer (v1.1) drm: Add missing static storage class specifiers in drm_proc.c file drm/udl: dpms off the crtc when disabled. drm: Remove two unused fields from struct drm_display_mode drm: stop vmgfx driver explosion drm/radeon/ss: use num_crtc rather than hardcoded 6 Revert "drm/radeon: fix bo creation retry path" drm/i915: use hsw rps tuning values everywhere on gen6+ drm/radeon: split ATRM support out from the ATPX handler (v3) drm/radeon: convert radeon vfct code to use acpi_get_table_with_size ACPI: export symbol acpi_get_table_with_size drm/radeon: implement ACPI VFCT vbios fetch (v3) drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover later silicon stepping drm/radeon: fix checking of MSAA renderbuffers on r600-r700 drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700 drm/radeon: init lockup timeout on ring init drm/radeon: avoid turning off spread spectrum for used pll drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID reads drm/i915: extract connector update from intel_ddc_get_modes() for reuse drm/i915: fix hsw uncached pte ...
2012-08-22drm: Add missing static storage class specifiers in drm_proc.c fileSachin Kamat
Fixes the following sparse warning: drivers/gpu/drm/drm_proc.c:92:5: warning: symbol 'drm_proc_create_files' was not declared. Should it be static? drivers/gpu/drm/drm_proc.c:175:5: warning: symbol 'drm_proc_remove_files' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-22drm/udl: dpms off the crtc when disabled.Dave Airlie
This turns off the crtc when its been disabled, fixes it not turning off properly the whole time. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-22drm: Remove two unused fields from struct drm_display_modeDamien Lespiau
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-22drm: stop vmgfx driver explosionAlan Cox
If you do a page flip with no flags set then event is NULL. If event is NULL then the vmw_gfx driver likes to go digging into NULL and extracts NULL->base.file_priv. On a modern kernel with NULL mapping protection it's just another oops, without it there are some "intriguing" possibilities. What it should do is an open question but that for the driver owners to sort out. Signed-off-by: Alan Cox <alan@linux.intel.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-22Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: " Nothing too major: - A few fixes around the edid handling from Jani, also fixing a regression in 3.5 due to us using gmbus by default. - Fixup hsw uncached pte flags. - Fix suspend/resume crash when using hw contexts, from Ben. - Try to tune gpu turbo a bit better, seems to help with some oddball power regressions." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: use hsw rps tuning values everywhere on gen6+ drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID reads drm/i915: extract connector update from intel_ddc_get_modes() for reuse drm/i915: fix hsw uncached pte drm/i915/contexts: fix list corruption drm/i915: fix EDID memory leak in SDVO
2012-08-21drm/radeon/ss: use num_crtc rather than hardcoded 6Alex Deucher
When checking if a pll is in use. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-21Revert "drm/radeon: fix bo creation retry path"Alex Deucher
This reverts commit d1c7871ddb1f588b8eb35affd9ee1a3d5e11cd0c. ttm_bo_init() destroys the BO on failure. So this patch makes the retry path work with freed memory. This ends up causing kernel panics when this path is hit. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-20Merge tag 'usb-3.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull more USB patches from Greg Kroah-Hartman: "Here are 10 more USB patches for 3.6-rc3. They all fix reported problems (build problems for one of them, and easily repeatable oopses for the others.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: gpu/mfd/usb: Fix USB randconfig problems USB: CDC ACM: Fix NULL pointer dereference USB: emi62: remove __devinit* from the struct usb_device_id table USB: winbond: remove __devinit* from the struct usb_device_id table USB: vt6656: remove __devinit* from the struct usb_device_id table USB: rtl8187: remove __devinit* from the struct usb_device_id table USB: p54usb: remove __devinit* from the struct usb_device_id table USB: spca506: remove __devinit* from the struct usb_device_id table USB: jl2005bcd: remove __devinit* from the struct usb_device_id table USB: smsusb: remove __devinit* from the struct usb_device_id table
2012-08-20gpu/mfd/usb: Fix USB randconfig problemsGuenter Roeck
Fix config warning: warning: ( ... && DRM_USB) selects USB which has unmet direct dependencies (USB_SUPPORT && USB_ARCH_HAS_HCD) and build error: ERROR: "usb_speed_string" [drivers/usb/core/usbcore.ko] undefined! by adding the missing dependency on USB_ARCH_HAS_HCD to DRM_UDL and DRM_USB. This exposes: drivers/video/Kconfig:36:error: recursive dependency detected! drivers/video/Kconfig:36: symbol FB is selected by DRM_KMS_HELPER drivers/gpu/drm/Kconfig:28: symbol DRM_KMS_HELPER is selected by DRM_UDL drivers/gpu/drm/udl/Kconfig:1: symbol DRM_UDL depends on USB_ARCH_HAS_HCD drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI drivers/usb/Kconfig:16: symbol USB_ARCH_HAS_OHCI depends on I2C drivers/i2c/Kconfig:5: symbol I2C is selected by FB_DDC drivers/video/Kconfig:86: symbol FB_DDC is selected by FB_CYBER2000_DDC drivers/video/Kconfig:385: symbol FB_CYBER2000_DDC depends on FB_CYBER2000 drivers/video/Kconfig:373: symbol FB_CYBER2000 depends on FB which is due to drivers/usb/Kconfig: config USB_ARCH_HAS_OHCI ... default y if ARCH_PNX4008 && I2C Fix by dropping I2C from the above dependency; logic is that this is not a platform dependency but a configuration dependency: the _architecture_ still supports USB even is I2C is not selected. This exposes: drivers/video/Kconfig:36:error: recursive dependency detected! drivers/video/Kconfig:36: symbol FB is selected by DRM_KMS_HELPER drivers/gpu/drm/Kconfig:28: symbol DRM_KMS_HELPER is selected by DRM_UDL drivers/gpu/drm/udl/Kconfig:1: symbol DRM_UDL depends on USB_ARCH_HAS_HCD drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI drivers/usb/Kconfig:17: symbol USB_ARCH_HAS_OHCI depends on MFD_TC6393XB drivers/mfd/Kconfig:396: symbol MFD_TC6393XB depends on GPIOLIB drivers/gpio/Kconfig:35: symbol GPIOLIB is selected by FB_VIA drivers/video/Kconfig:1560: symbol FB_VIA depends on FB which can be fixed by having MFD_TC6393XB select GPIOLIB instead of depending on it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-20drm/i915: use hsw rps tuning values everywhere on gen6+Daniel Vetter
James Bottomley reported [1] a massive power regression, due to the enabling of semaphores by default in 3.5. A workaround for him is to again disable semaphores. And indeed, his system has a very hard time to enter rc6 with semaphores enabled. Ben Widawsky run around with a kill-a-watt a lot and noticed: - There are indeed a few rare systems that seem to have a hard time entering rc6 when desktop-idle. - One machine, The Indestructible Toshiba regressed in this behaviour between 3.5 and 3.6 in a merge commit! So rc6 behaviour with the current setting seems to be highly timing dependent and not robust at all. - The behaviour James reported wrt semaphores seems to be a freak timing thing that only happens on his specific machine, confirming that enabling semaphores shouldn't reduce rc6 residency. Now furthermore the Google ChromeOS guys reported [2] a while ago that at least on some machines a simply a blinking cursor can keep the gpu turbo at the highest frequency. This is because the current rps limits used on snb/ivb are highly asymmetric. On the theory that gpu turbo and rc6 tuning values are related, we've tried whether the much saner looking (since much less asymmetric) rps tuning values used for hsw would also help entering rc6 more robustly. And it seems to mostly work, and we don't really have the resources to through-roughly tune things in any better way: The values from the ChromeOS ppl seem to fare a bit worse for James' machine, so I guess we better stick with something vpg (the gpu hw/windows group) provided, hoping that they've done their jobs. Reference[1]: http://lists.freedesktop.org/archives/dri-devel/2012-July/025675.html Reference[2]: http://lists.freedesktop.org/archives/intel-gfx/2012-July/018692.html Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53393 Tested-by: Ben Widawsky <ben@bwidawsk.net> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20drm/radeon: split ATRM support out from the ATPX handler (v3)Alex Deucher
There are systems that use ATRM, but not ATPX. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41265 V2: fix #ifdefs as per Greg's comments V3: fix it harder Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-20drm/radeon: convert radeon vfct code to use acpi_get_table_with_sizeAlex Deucher
Allows us to verify the table size. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-20drm/radeon: implement ACPI VFCT vbios fetch (v3)David Lamparter
This is required for pure UEFI systems. The vbios is stored in ACPI rather than at the legacy vga location. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=26891 V2: fix #ifdefs as per Greg's comments V3: fix it harder Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org
2012-08-20drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover ↵Tvrtko Ursulin
later silicon stepping There is a more recent APU stepping with a new PCI ID shipping in the same board by Fujitsu which needs the same quirk to correctly mark the back plane connectors. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-20drm/radeon: fix checking of MSAA renderbuffers on r600-r700Marek Olšák
The MSAA checking was mostly unimplemented on r600-r700. The userspace submits GPU commands and the kernel driver computes how much memory the GPU will access and checks if it's all within buffer bounds the userspace allocated. This patch fixes the computations of the size of MSAA surfaces in memory. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-20drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700Marek Olšák
MSAA is impossible without them. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-08-20drm/radeon: init lockup timeout on ring initChristian König
Reset the lockup timeout on ring (re-)initialisation. Otherwise we get error messages like this on gpu resets: [ 1559.949177] radeon 0000:01:00.0: GPU lockup CP stall for more than 1482270msec Signed-off-by: Christian König <deathsimple@vodafone.de> cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
2012-08-20drm/radeon: avoid turning off spread spectrum for used pllJerome Glisse
If spread spectrum is enabled and in use for a given pll we should not turn it off as it will lead to turning off display for crtc that use the pll (this behavior was observed on chelsea edp). Signed-off-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-17vga_switcheroo: Don't require handler init callbackSeth Forshee
This callback is a no-op in nouveau, and the upcoming apple-gmux switcheroo support won't require it either. Rather than forcing drivers to stub it out, just make it optional and remove the callback from nouveau. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-08-17vga_switcheroo: Remove assumptions about registration/unregistration orderingSeth Forshee
vga_switcheroo assumes that the handler will be registered before the last client, otherwise switching will not be enabled. Likewise it's assumed that the handler will not be unregistered without at least one client also being unregistered, otherwise switching will remain enabled despite no longer having a handler. These assumptions cannot be enforced if the handler is in a separate driver from both clients, as with the gmux found in Apple laptops. Remove this assumption. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-08-17drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID readsJani Nikula
GMBUS was enabled over bit-banging as the default in commits: commit c3dfefa0a6d235bd465309e12f4c56ea16e71111 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Feb 14 22:37:25 2012 +0100 drm/i915: reenable gmbus on gen3+ again and commit 0fb3f969c8683505fb7323c06bf8a999a5a45a15 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Mar 2 19:38:30 2012 +0100 drm/i915: enable gmbus on gen2 Unfortunately, GMBUS seems to fail on some CRT displays. Add a bit-banging fallback to CRT EDID reads. LKML-Reference: <201207251020.47637.maciej.rutecki@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45881 Signed-off-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Alex Ferrando <alferpal@gmail.com> Cc: stable@vger.kernel.org (for 3.4+3.5) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17drm/i915: extract connector update from intel_ddc_get_modes() for reuseJani Nikula
Refactor the connector update part of intel_ddc_get_modes() into a separate intel_connector_update_modes() function for reuse. No functional changes. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45881 Tested-by: Alex Ferrando <alferpal@gmail.com> Cc: stable@vger.kernel.org (for 3.4+3.5) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17drm/i915: fix hsw uncached pteDaniel Vetter
They've changed it ... for no apparent reason. Meh. V2: remove unused 'is_hsw' field. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17drm/i915/contexts: fix list corruptionBen Widawsky
After reset we unconditionally reinitialize lists. If the context switch hasn't yet completed before the suspend, the default context object will end up on lists that are going to go away when we resume. The patch forces the context switch to be synchronous before suspend assuring that the active/inactive tracking is correct at the time of resume. References: https://bugs.freedesktop.org/show_bug.cgi?id=52429 Tested-by: Guang A Yang <guang.a.yang@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17drm/i915: fix EDID memory leak in SDVOJani Nikula
The EDID returned by drm_get_edid() was never freed. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-15Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie
git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes * 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/nve0/fifo: add support for the flip completion swmthd
2012-08-15Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel Vetter writes: "A few important fixers: - fix various lvds backlight issues, regressed in 3.6 (Takashi Iwai) - make the retina mbp work (ignore bogus edp bpc value in vbt) - fix a gmbus regression introduced in (iirc) 3.4 (Jani Nikula) - fix an edp panel power sequence regression, fixes the new macbook air - apply the tlb invalidate w/a Otherwise we still have another gmbus regression (patches are awaiting tested-bys) and there's something odd going with some rare systems not entering rc6 often enough (and hence blowing through too much power). It seems to be a timing-related issue and can be mitigated by frobbing the magic tuning parameters. We're still working on that one. Also, we still have some fallout from the hw context support, but you can only hit that with mesa master." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid
2012-08-14drm/i915: Apply post-sync write for pipe control invalidatesChris Wilson
When invalidating the TLBs it is documentated as requiring a post-sync write. Failure to do so seems to result in a GPU hang. Exposure to this hang on IVB seems to be a result of removing the extra stalls required for SNB pipecontrol workarounds: commit 6c6cf5aa9c583478b19e23149feaa92d01fb8c2d Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jul 20 18:02:28 2012 +0100 drm/i915: Only apply the SNB pipe control w/a to gen6 Note: Manually switch the pipe_control cmd to 4 dwords to avoid a (silent) functional conflict with -next. This way will get a loud (but conflict with next (since the scratch_addr has been deleted there). Reported-and-tested-by: yex.tian@intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53322 Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: added note about merge conflict with -next.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-26 13:08:52 +0000