summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/ipath/ipath_rc.c
AgeCommit message (Collapse)Author
2007-07-09IB/ipath: Update copyright datesJohn Gregor
Now that it's June, it's about time to update the copyright notices of files that have changed. Signed-off-by: John Gregor <john.gregor@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Send ACK invalid where appropriateRobert Walsh
The IB specification ch. 9.9.3 table 58 says that a QP which isn't set up for the operation should return a NAK invalid request. Signed-off-by: Robert Walsh <robert.walsh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Duplicate RDMA reads can cause responder to NAK inappropriatelyRalph Campbell
A duplicate RDMA read request can fool the responder into NAKing a new RDMA read request because the responder wasn't keeping track of whether the queue of RDMA read requests had been sent at least once. For example, requester sends 4 2K byte RDMA read requests, times out, and resends the first, then sees the 4 responses, then sends a 5th RDMA read or atomic operation. The responder sees the 4 requests, sends 4 responses, sees the resent 1st request, rewinds the queue, then sees the 5th request but thinks the queue is full and that the requester is invalidly sending a 5th new request. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Fix RDMA read retry codeRalph Campbell
A RDMA read response or atomic response can ACK earlier sends and RDMA writes. In this case, the wrong work request pointer was being used to store the read first response or atomic result. Also, if a RDMA read request is retried, the code to compute which request to resend was incorrect. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ipath: Set M bit in BTH according to IB specRalph Campbell
According to chapter 17.2.8.1.1, QPs start in the migrated state and should send packets with the M bit set in the BTH. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-06IB/ipath: Fix a race condition when generating ACKsRalph Campbell
Fix a problem where simple ACKs can be sent ahead of RDMA read responses thus implicitly NAKing the RDMA read. Signed-off-by: Ralph Campbell <ralph.cambpell@qlogic.com> Signed-off-by: Robert Walsh <robert.walsh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-06IB/ipath: Fix two more spin lock problemsRalph Campbell
Fix a missing unlock in ipath_rc_rcv_resp() and remove an extra unlock from ipath_rc_rcv_error(). Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-30IB/ipath: Don't put QP in timeout queue if waiting to sendRalph Campbell
This fixes a problem which causes too many RC timeouts and retransmits. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-30IB/ipath: Don't call spin_lock_irq() from interrupt contextRalph Campbell
This patch fixes the problem reported by Bernd Schubert <bs@q-leap.de> with kernel debug options enabled: BUG: at kernel/lockdep.c:1860 trace_hardirqs_on() This was caused by using spin_lock_irq()/spin_unlock_irq() from interrupt context. Fix all the places that might be called from interrupts to use spin_lock_irqsave()/spin_unlock_irqrestore(). Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18IB/ipath: Fix RDMA reads of length zero and error handlingRalph Campbell
Fix RDMA read response length checking for RDMA_READ_RESPONSE_ONLY to allow a zero length response. RDMA read responses which don't match the expected length or occur in response to some other operation should generate a completion queue error (see table 56, ch. 9.9.2.3 in the IB spec). Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18IB/ipath: Fix PSN update for RC retriesRalph Campbell
This patch fixes a number of bugs with updating the PSN for retries of RC requests. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18IB/ipath: Fix QP error completion queue entriesRalph Campbell
When switching to the QP error state, the completion queue entries (error or flush) were not being generated correctly. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18IB/ipath: Support larger IB_QP_MAX_DEST_RD_ATOMIC and IB_QP_MAX_QP_RD_ATOMICRalph Campbell
This patch adds support for multiple RDMA reads and atomics to be sent before an ACK is required to be seen by the requester. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-04IB: Return qp pointer as part of ib_wcMichael S. Tsirkin
struct ib_wc currently only includes the local QP number: this matches the IB spec, but seems mostly useless. The following patch replaces this with the pointer to qp itself, and updates all low level drivers and all users. This has the following advantages: - Ability to get a per-qp context through wc->qp->qp_context - Existing drivers already have the qp pointer ready in poll cq, so this change actually saves a tiny bit (extra memory read) on data path (for ehca it would actually be expensive to find the QP pointer when polling a CQ, but ehca does not support SRQ so we can leave wc->qp as NULL for ehca) - Users that need the QP number can still get it through wc->qp->qp_num Use case: In IPoIB connected mode code, I have a common CQ shared by multiple QPs. To track connection usage, I need a way to get at some per-QP context upon the completion, and I would like to avoid allocating context object per work request just to stick a QP pointer into it. With this code, I can just use wc->qp->qp_context. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02IB/ipath: Fix RDMA readsRalph Campbell
The PSN used to generate the request following a RDMA read was incorrect and some state booking wasn't maintained correctly. This patch fixes that. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
2006-09-28IB/ipath: Flush RWQEs if access error or invalid error seenBryan O'Sullivan
If the receiver goes into the error state, we need to flush the posted receive WQEs. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Ensure that PD of MR matches PD of QP checking the RkeyBryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: RC and UC should validate SLID and DLIDBryan O'Sullivan
This is required for IB conformance (spec ch. 9.6.1.5). Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Limit # of packets sent without an ACK receivedBryan O'Sullivan
The sender requests an ACK every 1/2 MB to avoid retransmit timeouts that were causing MVAPICH mod_bw to fail after a predictable number of sends. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ipath: simplify layering codeBryan O'Sullivan
A lot of ipath layer code was only called in one place. Now that the ipath_core and ib_ipath drivers are merged, it's more sensible to simply inline the simple stuff that the layer code was doing. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-01[PATCH] IB/ipath: namespace cleanup: replace ips with ipathBryan O'Sullivan
Remove ips namespace from infinipath drivers. This renames ips_common.h to ipath_common.h. Definitions, data structures, etc. that were not used by kernel modules have moved to user-only headers. All names including ips have been renamed to ipath. Some names have had an ipath prefix added. Signed-off-by: Christian Bell <christian.bell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: rC receive interrupt performance changesBryan O'Sullivan
This patch separates QP state used for sending and receiving RC packets so the processing in the receive interrupt handler can be done mostly without locks being held. ACK packets are now sent without requiring synchronization with the send tasklet. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: fix shared receive queues for RCBryan O'Sullivan
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: fix an indenting problemBryan O'Sullivan
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: share more common code between RC and UC protocolsBryan O'Sullivan
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: update copyrights and other strings to reflect new company ↵Bryan O'Sullivan
name Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23IB/ipath: replace uses of LIST_POISONBryan O'Sullivan
Per Andrew's request. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31IB/ipath: infiniband RC protocol supportBryan O'Sullivan
This is an implementation of the Infiniband RC ("reliable connection") protocol. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-14 23:53:07 +0000