| Age | Commit message (Collapse) | Author |
|---|
|
commit db7a691a1551a748cb92d9c89c6b190ea87e28d5 upstream.
If the firmware reports a connection width that is not 1x, 4x, 8x or 12x
it causes the driver to fail during initialization.
To prevent this failure every time a new width is introduced to the RDMA
stack, we will set a default 4x width for these widths which ar unknown to
the driver.
This is needed to allow to run old kernels with new firmware.
Cc: <stable@vger.kernel.org> # 4.1
Fixes: 1b5daf11b015 ("IB/mlx5: Avoid using the MAD_IFC command under ISSI > 0 mode")
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 24c3456c8d5ee6fc1933ca40f7b4406130682668 upstream.
If for some reason we failed to query the mr status, we need to make sure
to provide sufficient information for an ambiguous error (guard error on
sector 0).
Fixes: 0a7a08ad6f5f ("IB/iser: Implement check_protection")
Cc: <stable@vger.kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a0e0cb82804a6a21d9067022c2dfdf80d11da429 upstream.
pq_update() can only be called in two places: from the completion
function when the complete (npkts) sequence of packets has been
submitted and processed, or from setup function if a subset of the
packets were submitted (i.e. the error path).
Currently both paths can call pq_update() if an error occurrs. This
race will cause the n_req value to go negative, hanging file_close(),
or cause a crash by freeing the txlist more than once.
Several variables are used to determine SDMA send state. Most of
these are unnecessary, and have code inspectible races between the
setup function and the completion function, in both the send path and
the error path.
The request 'status' value can be set by the setup or by the
completion function. This is code inspectibly racy. Since the status
is not needed in the completion code or by the caller it has been
removed.
The request 'done' value races between usage by the setup and the
completion function. The completion function does not need this.
When the number of processed packets matches npkts, it is done.
The 'has_error' value races between usage of the setup and the
completion function. This can cause incorrect error handling and leave
the n_req in an incorrect value (i.e. negative).
Simplify the code by removing all of the unneeded state checks and
variables.
Clean up iovs node when it is freed.
Eliminate race conditions in the error path:
If all packets are submitted, the completion handler will set the
completion status correctly (ok or aborted).
If all packets are not submitted, the caller must wait until the
submitted packets have completed, and then set the completion status.
These two change eliminate the race condition in the error path.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e6f9bc34d3779cb7b6a337afed5de8be3f0fab77 upstream.
Build with the latest patches resulted in panic:
11384.486289] BUG: unable to handle kernel NULL pointer dereference at
(null)
[11384.486293] IP: (null)
[11384.486295] PGD 0
[11384.486295] P4D 0
[11384.486296]
[11384.486299] Oops: 0010 [#1] SMP
......... snip ......
[11384.486401] CPU: 0 PID: 968 Comm: kworker/0:1H Tainted: G W O
4.13.0-a-stream-20170825 #1
[11384.486402] Hardware name: Intel Corporation S2600WT2R/S2600WT2R,
BIOS SE5C610.86B.01.01.0014.121820151719 12/18/2015
[11384.486418] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
[11384.486419] task: ffff880850579680 task.stack: ffffc90007fec000
[11384.486420] RIP: 0010: (null)
[11384.486420] RSP: 0018:ffffc90007fef970 EFLAGS: 00010206
[11384.486421] RAX: ffff88084cfe8000 RBX: ffff88084dce4000 RCX:
ffffc90007fef978
[11384.486422] RDX: 0000000000000000 RSI: 0000000000000001 RDI:
ffff88084cfe8000
[11384.486422] RBP: ffffc90007fefab0 R08: 0000000000000000 R09:
ffff88084dce4080
[11384.486423] R10: ffffffffa02d7f60 R11: 0000000000000000 R12:
ffff88105af65a00
[11384.486423] R13: ffff88084dce4000 R14: 000000000000c000 R15:
000000000000c000
[11384.486424] FS: 0000000000000000(0000) GS:ffff88085f400000(0000)
knlGS:0000000000000000
[11384.486425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[11384.486425] CR2: 0000000000000000 CR3: 0000000001c09000 CR4:
00000000001406f0
[11384.486426] Call Trace:
[11384.486431] ? is_valid_mcast_lid.isra.21+0xfb/0x110 [ib_core]
[11384.486436] ib_attach_mcast+0x6f/0xa0 [ib_core]
[11384.486441] ipoib_mcast_attach+0x81/0x190 [ib_ipoib]
[11384.486443] ipoib_mcast_join_complete+0x354/0xb40 [ib_ipoib]
[11384.486448] mcast_work_handler+0x330/0x6c0 [ib_core]
[11384.486452] join_handler+0x101/0x220 [ib_core]
[11384.486455] ib_sa_mcmember_rec_callback+0x54/0x80 [ib_core]
[11384.486459] recv_handler+0x3a/0x60 [ib_core]
[11384.486462] ib_mad_recv_done+0x423/0x9b0 [ib_core]
[11384.486466] __ib_process_cq+0x5d/0xb0 [ib_core]
[11384.486469] ib_cq_poll_work+0x20/0x60 [ib_core]
[11384.486472] process_one_work+0x149/0x360
[11384.486474] worker_thread+0x4d/0x3c0
[11384.486487] kthread+0x109/0x140
[11384.486488] ? rescuer_thread+0x380/0x380
[11384.486489] ? kthread_park+0x60/0x60
[11384.486490] ? kthread_park+0x60/0x60
[11384.486493] ret_from_fork+0x25/0x30
[11384.486493] Code: Bad RIP value.
[11384.486493] Code: Bad RIP value.
[11384.486496] RIP: (null) RSP: ffffc90007fef970
[11384.486497] CR2: 0000000000000000
[11384.486531] ---[ end trace b1acec6fb4ff6e75 ]---
[11384.532133] Kernel panic - not syncing: Fatal exception
[11384.536541] Kernel Offset: disabled
[11384.969491] ---[ end Kernel panic - not syncing: Fatal exception
[11384.976875] sched: Unexpected reschedule of offline CPU#1!
[11384.983646] ------------[ cut here ]------------
Rdma device driver may not have implemented (*get_link_layer)()
so it can not be called directly. Should use appropriate helper function.
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Fixes: 523633359224 ("IB/core: Fix the validations of a multicast LID in attach or detach operations")
Cc: stable@kernel.org # 4.13
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4d6e4d12da2c308f8f976d3955c45ee62539ac98 ]
IPCB should be cleared before icmp_send, since it may contain data from
previous layers and the data could be misinterpreted as ip header options,
which later caused the ihl to be set to an invalid value and resulted in
the following stack corruption:
[ 1083.031512] ib0: packet len 57824 (> 2048) too long to send, dropping
[ 1083.031843] ib0: packet len 37904 (> 2048) too long to send, dropping
[ 1083.032004] ib0: packet len 4040 (> 2048) too long to send, dropping
[ 1083.032253] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.032481] ib0: packet len 23960 (> 2048) too long to send, dropping
[ 1083.033149] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033439] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033700] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034124] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034387] ==================================================================
[ 1083.034602] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xf08/0x1310
[ 1083.034798] Write of size 4 at addr ffff880353457c5f by task kworker/u16:0/7
[ 1083.034990]
[ 1083.035104] CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G O 4.19.0-rc5+ #1
[ 1083.035316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 1083.035573] Workqueue: ipoib_wq ipoib_cm_skb_reap [ib_ipoib]
[ 1083.035750] Call Trace:
[ 1083.035888] dump_stack+0x9a/0xeb
[ 1083.036031] print_address_description+0xe3/0x2e0
[ 1083.036213] kasan_report+0x18a/0x2e0
[ 1083.036356] ? __ip_options_echo+0xf08/0x1310
[ 1083.036522] __ip_options_echo+0xf08/0x1310
[ 1083.036688] icmp_send+0x7b9/0x1cd0
[ 1083.036843] ? icmp_route_lookup.constprop.9+0x1070/0x1070
[ 1083.037018] ? netif_schedule_queue+0x5/0x200
[ 1083.037180] ? debug_show_all_locks+0x310/0x310
[ 1083.037341] ? rcu_dynticks_curr_cpu_in_eqs+0x85/0x120
[ 1083.037519] ? debug_locks_off+0x11/0x80
[ 1083.037673] ? debug_check_no_obj_freed+0x207/0x4c6
[ 1083.037841] ? check_flags.part.27+0x450/0x450
[ 1083.037995] ? debug_check_no_obj_freed+0xc3/0x4c6
[ 1083.038169] ? debug_locks_off+0x11/0x80
[ 1083.038318] ? skb_dequeue+0x10e/0x1a0
[ 1083.038476] ? ipoib_cm_skb_reap+0x2b5/0x650 [ib_ipoib]
[ 1083.038642] ? netif_schedule_queue+0xa8/0x200
[ 1083.038820] ? ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.038996] ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.039174] process_one_work+0x912/0x1830
[ 1083.039336] ? wq_pool_ids_show+0x310/0x310
[ 1083.039491] ? lock_acquire+0x145/0x3a0
[ 1083.042312] worker_thread+0x87/0xbb0
[ 1083.045099] ? process_one_work+0x1830/0x1830
[ 1083.047865] kthread+0x322/0x3e0
[ 1083.050624] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 1083.053354] ret_from_fork+0x3a/0x50
For instance __ip_options_echo is failing to proceed with invalid srr and
optlen passed from another layer via IPCB
[ 762.139568] IPv4: __ip_options_echo rr=0 ts=0 srr=43 cipso=0
[ 762.139720] IPv4: ip_options_build: IPCB 00000000f3cd969e opt 000000002ccb3533
[ 762.139838] IPv4: __ip_options_echo in srr: optlen 197 soffset 84
[ 762.139852] IPv4: ip_options_build srr=0 is_frag=0 rr_needaddr=0 ts_needaddr=0 ts_needtime=0 rr=0 ts=0
[ 762.140269] ==================================================================
[ 762.140713] IPv4: __ip_options_echo rr=0 ts=0 srr=0 cipso=0
[ 762.141078] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x12ec/0x1680
[ 762.141087] Write of size 4 at addr ffff880353457c7f by task kworker/u16:0/7
Signed-off-by: Denis Drozdov <denisd@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0f6ef65d1c6ec8deb5d0f11f86631ec4cfe8f22e ]
If the provider driver (such as rdma_rxe) doesn't support pma counters,
avoid exposing its directory similar to optional hw_counters directory.
If core fails to read the PMA counter, return an error so that user can
retry later if needed.
Fixes: 35c4cbb17811 ("IB/core: Create get_perf_mad function in sysfs.c")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0295e39595e1146522f2722715dba7f7fba42217 upstream.
hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/infiniband/core/ucm.c:1127 ib_ucm_write() warn: potential
spectre issue 'ucm_cmd_table' [r] (local cap)
Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a3671a4f973ee9d9621d60166cc3b037c397d604 upstream.
hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/infiniband/core/ucma.c:1686 ucma_write() warn: potential
spectre issue 'ucma_cmd_table' [r] (local cap)
Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3dc7c7badb7502ec3e3aa817a8bdd9e53aa54c52 ]
Before returning -EPERM we should release some resources, as already done
in the other error handling path of the function.
Fixes: d8f9cc328c88 ("IB/mlx4: Mark user MR as writable if actual virtual memory is writable")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 612601d0013f03de9dc134809f242ba6da9ca252 ]
commit 9a9b8112699d will cause core to fail UD QP from being destroyed
on ipoib unload, therefore cause resources leakage.
On pkey change event above patch modifies mgid before calling underlying
driver to detach it from QP. Drivers' detach_mcast() will fail to find
modified mgid it was never given to attach in a first place.
Core qp->usecnt will never go down, so ib_destroy_qp() will fail.
IPoIB driver actually does take care of new broadcast mgid based on new
pkey by destroying an old mcast object in ipoib_mcast_dev_flush())
....
if (priv->broadcast) {
rb_erase(&priv->broadcast->rb_node, &priv->multicast_tree);
list_add_tail(&priv->broadcast->list, &remove_list);
priv->broadcast = NULL;
}
...
then in restarted ipoib_macst_join_task() creating a new broadcast mcast
object, sending join request and on completion tells the driver to attach
to reinitialized QP:
...
if (!priv->broadcast) {
...
broadcast = ipoib_mcast_alloc(dev, 0);
...
memcpy(broadcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
sizeof (union ib_gid));
priv->broadcast = broadcast;
...
Fixes: 9a9b8112699d ("IB/ipoib: Update broadcast object if PKey value was changed in index 0")
Cc: stable@vger.kernel.org
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e7b169f34403becd3c9fd3b6e46614ab788f2187 ]
During QP creation, the mlx5 driver translates the QP type to an
internal value which is passed on to FW. There was no check to make
sure that the translated value is valid, and -EINVAL was coerced into
the mailbox command.
Current firmware refuses this as an invalid QP type, but future/past
firmware may do something else.
Fixes: 09a7d9eca1a6c ('{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc')
Reviewed-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6b9f8970cd30929cb6b372fa44fa66da9e59c650 ]
If the allocation of elem fails, it is not sufficient to simply check
for NULL and return. We need to also put our reference on the pool or
else we will leave the pool with a permanent ref count and we will never
be able to free it.
Fixes: 4831ca9e4a8e ("IB/rxe: check for allocation failure on elem")
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f80bd6a6cc8358b81194e1f5fc16449947396ec ]
The locking order of vlan_rwsem (LOCK A) and then rtnl (LOCK B),
contradicts other flows such as ipoib_open possibly causing a deadlock.
To prevent this deadlock heavy flush is called with RTNL locked and
only then tries to acquire vlan_rwsem.
This deadlock is possible only when there are child interfaces.
[ 140.941758] ======================================================
[ 140.946276] WARNING: possible circular locking dependency detected
[ 140.950950] 4.15.0-rc1+ #9 Tainted: G O
[ 140.954797] ------------------------------------------------------
[ 140.959424] kworker/u32:1/146 is trying to acquire lock:
[ 140.963450] (rtnl_mutex){+.+.}, at: [<ffffffffc083516a>] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib]
[ 140.970006]
but task is already holding lock:
[ 140.975141] (&priv->vlan_rwsem){++++}, at: [<ffffffffc0834ee1>] __ipoib_ib_dev_flush+0x51/0x4e0 [ib_ipoib]
[ 140.982105]
which lock already depends on the new lock.
[ 140.990023]
the existing dependency chain (in reverse order) is:
[ 140.998650]
-> #1 (&priv->vlan_rwsem){++++}:
[ 141.005276] down_read+0x4d/0xb0
[ 141.009560] ipoib_open+0xad/0x120 [ib_ipoib]
[ 141.014400] __dev_open+0xcb/0x140
[ 141.017919] __dev_change_flags+0x1a4/0x1e0
[ 141.022133] dev_change_flags+0x23/0x60
[ 141.025695] devinet_ioctl+0x704/0x7d0
[ 141.029156] sock_do_ioctl+0x20/0x50
[ 141.032526] sock_ioctl+0x221/0x300
[ 141.036079] do_vfs_ioctl+0xa6/0x6d0
[ 141.039656] SyS_ioctl+0x74/0x80
[ 141.042811] entry_SYSCALL_64_fastpath+0x1f/0x96
[ 141.046891]
-> #0 (rtnl_mutex){+.+.}:
[ 141.051701] lock_acquire+0xd4/0x220
[ 141.055212] __mutex_lock+0x88/0x970
[ 141.058631] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib]
[ 141.063160] __ipoib_ib_dev_flush+0x71/0x4e0 [ib_ipoib]
[ 141.067648] process_one_work+0x1f5/0x610
[ 141.071429] worker_thread+0x4a/0x3f0
[ 141.074890] kthread+0x141/0x180
[ 141.078085] ret_from_fork+0x24/0x30
[ 141.081559]
other info that might help us debug this:
[ 141.088967] Possible unsafe locking scenario:
[ 141.094280] CPU0 CPU1
[ 141.097953] ---- ----
[ 141.101640] lock(&priv->vlan_rwsem);
[ 141.104771] lock(rtnl_mutex);
[ 141.109207] lock(&priv->vlan_rwsem);
[ 141.114032] lock(rtnl_mutex);
[ 141.116800]
*** DEADLOCK ***
Fixes: b4b678b06f6e ("IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07d432bb97f19dd5e784175152f9fce3b2646133 ]
The driver may sleep under a spin lock, and the function call path is:
post_one_send (acquire the lock by spin_lock_irqsave)
init_send_wqe
copy_from_user --> may sleep
There is no flow that makes "qp->is_user" true, and copy_from_user may
cause bug when a non-user pointer is used. So the lines of copy_from_user
and check of "qp->is_user" are removed.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5236333592244557a19694a51337df6ac018f0a7 ]
RoCE Annex (A16.9.10/11) declares that during attach (detach) QP to a
multicast group, if the QP is associated with a RoCE port, the
multicast group MLID is unused and is ignored.
During attach or detach multicast, when the QP is associated with a
port, it is enough to check the port's link layer and validate the
LID only if it is Infiniband. Otherwise, avoid validating the
multicast LID.
Fixes: 8561eae60ff9 ("IB/core: For multicast functions, verify that LIDs are multicast LIDs")
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 14fa91e0fef8e4d6feb8b1fa2a807828e0abe815 ]
netdev_wait_allrefs() could rebroadcast NETDEV_UNREGISTER event
multiple times until all refs are gone, which will result in calling
ipoib_delete_debug_files multiple times and printing a warning.
Remove the WARN_ONCE since checks of NULL pointers before calling
debugfs_remove are not needed.
Fixes: 771a52584096 ("IB/IPoIB: ibX: failed to create mcg debug file")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5fe23f262e0548ca7f19fb79f89059a60d087d22 upstream.
There is a race condition between ucma_close() and ucma_resolve_ip():
CPU0 CPU1
ucma_resolve_ip(): ucma_close():
ctx = ucma_get_ctx(file, cmd.id);
list_for_each_entry_safe(ctx, tmp, &file->ctx_list, list) {
mutex_lock(&mut);
idr_remove(&ctx_idr, ctx->id);
mutex_unlock(&mut);
...
mutex_lock(&mut);
if (!ctx->closing) {
mutex_unlock(&mut);
rdma_destroy_id(ctx->cm_id);
...
ucma_free_ctx(ctx);
ret = rdma_resolve_addr();
ucma_put_ctx(ctx);
Before idr_remove(), ucma_get_ctx() could still find the ctx
and after rdma_destroy_id(), rdma_resolve_addr() may still
access id_priv pointer. Also, ucma_put_ctx() may use ctx after
ucma_free_ctx() too.
ucma_close() should call ucma_put_ctx() too which tests the
refcnt and waits for the last one releasing it. The similar
pattern is already used by ucma_destroy_id().
Reported-and-tested-by: syzbot+da2591e115d57a9cbb8b@syzkaller.appspotmail.com
Reported-by: syzbot+cfe3c1e8ef634ba8964b@syzkaller.appspotmail.com
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0d23ba6034b9cf48b8918404367506da3e4b3ee5 ]
The current code grabs the private_data of whatever file descriptor
userspace has supplied and implicitly casts it to a `struct ucma_file *`,
potentially causing a type confusion.
This is probably fine in practice because the pointer is only used for
comparisons, it is never actually dereferenced; and even in the
comparisons, it is unlikely that a file from another filesystem would have
a ->private_data pointer that happens to also be valid in this context.
But ->private_data is not always guaranteed to be a valid pointer to an
object owned by the file's filesystem; for example, some filesystems just
cram numbers in there.
Check the type of the supplied file descriptor to be safe, analogous to how
other places in the kernel do it.
Fixes: 88314e4dda1e ("RDMA/cma: add support for rdma_migrate_id()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0dbfaa9f2813787679e296eb5476e40938ab48c8 upstream.
The SL specified by a user needs to be a valid SL.
Add a range check to the user specified SL value which protects from
running off the end of the SL to SC table.
CC: stable@vger.kernel.org
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d623500b3c4efd8d4e945ac9003c6b87b469a9ab upstream.
If a packet stream uses an UnsupportedVL (virtual lane), the send
engine will not send the packet, and it will not indicate that an
error has occurred. This will cause the packet stream to block.
HFI has 8 virtual lanes available for packet streams. Each lane can
be enabled or disabled using the UnsupportedVL mask. If a lane is
disabled, adding a packet to the send context must be disallowed.
The current mask for determining unsupported VLs defaults to 0 (allow
all). This is incorrect. Only the VLs that are defined should be
allowed.
Determine which VLs are disabled (mtu == 0), and set the appropriate
unsupported bit in the mask. The correct mask will allow the send
engine to error on the invalid VL, and error recovery will work
correctly.
Cc: <stable@vger.kernel.org> # 4.9.x+
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 94694d18cf27a6faad91487a38ce516c2b16e7d9 upstream.
If the number of packets in a user sdma request does not match
the actual iovectors being sent, sdma_cleanup can be called on
an uninitialized request structure, resulting in a crash similar
to this:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1]
PGD 8000001044f61067 PUD 1052706067 PMD 0
Oops: 0000 [#1] SMP
CPU: 30 PID: 69912 Comm: upsm Kdump: loaded Tainted: G OE
------------ 3.10.0-862.el7.x86_64 #1
Hardware name: Intel Corporation S2600KPR/S2600KPR, BIOS
SE5C610.86B.01.01.0019.101220160604 10/12/2016
task: ffff8b331c890000 ti: ffff8b2ed1f98000 task.ti: ffff8b2ed1f98000
RIP: 0010:[<ffffffffc0ae8bb7>] [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0
[hfi1]
RSP: 0018:ffff8b2ed1f9bab0 EFLAGS: 00010286
RAX: 0000000000008b2b RBX: ffff8b2adf6e0000 RCX: 0000000000000000
RDX: 00000000000000a0 RSI: ffff8b2e9eedc540 RDI: ffff8b2adf6e0000
RBP: ffff8b2ed1f9bad8 R08: 0000000000000000 R09: ffffffffc0b04a06
R10: ffff8b331c890190 R11: ffffe6ed00bf1840 R12: ffff8b3315480000
R13: ffff8b33154800f0 R14: 00000000fffffff2 R15: ffff8b2e9eedc540
FS: 00007f035ac47740(0000) GS:ffff8b331e100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000c03fe6000 CR4: 00000000001607e0
Call Trace:
[<ffffffffc0b0570d>] user_sdma_send_pkts+0xdcd/0x1990 [hfi1]
[<ffffffff9fe75fb0>] ? gup_pud_range+0x140/0x290
[<ffffffffc0ad3105>] ? hfi1_mmu_rb_insert+0x155/0x1b0 [hfi1]
[<ffffffffc0b0777b>] hfi1_user_sdma_process_request+0xc5b/0x11b0 [hfi1]
[<ffffffffc0ac193a>] hfi1_aio_write+0xba/0x110 [hfi1]
[<ffffffffa001a2bb>] do_sync_readv_writev+0x7b/0xd0
[<ffffffffa001bede>] do_readv_writev+0xce/0x260
[<ffffffffa022b089>] ? tty_ldisc_deref+0x19/0x20
[<ffffffffa02268c0>] ? n_tty_ioctl+0xe0/0xe0
[<ffffffffa001c105>] vfs_writev+0x35/0x60
[<ffffffffa001c2bf>] SyS_writev+0x7f/0x110
[<ffffffffa051f7d5>] system_call_fastpath+0x1c/0x21
Code: 06 49 c7 47 18 00 00 00 00 0f 87 89 01 00 00 5b 41 5c 41 5d 41 5e 41 5f
5d c3 66 2e 0f 1f 84 00 00 00 00 00 48 8b 4e 10 48 89 fb <48> 8b 51 08 49 89 d4
83 e2 0c 41 81 e4 00 e0 00 00 48 c1 ea 02
RIP [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1]
RSP <ffff8b2ed1f9bab0>
CR2: 0000000000000008
There are two exit points from user_sdma_send_pkts(). One (free_tx)
merely frees the slab entry and one (free_txreq) cleans the sdma_txreq
prior to freeing the slab entry. The free_txreq variation can only be
called after one of the sdma_init*() variations has been called.
In the panic case, the slab entry had been allocated but not inited.
Fix the issue by exiting through free_tx thus avoiding sdma_clean().
Cc: <stable@vger.kernel.org> # 4.9.x+
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
commit ee92efe41cf358f4b99e73509f2bfd4733609f26 upstream.
Use different loop variables for the inner and outer loop. This avoids
that an infinite loop occurs if there are more RDMA channels than
target->req_ring_size.
Fixes: d92c0da71a35 ("IB/srp: Add multichannel support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c2d7c8ff89b22ddefb1ac2986c0d48444a667689 ]
"nents" is an unsigned int, so if ib_map_mr_sg() returns a negative
error code then it's type promoted to a high unsigned int which is
treated as success.
Fixes: a060b5629ab0 ("IB/core: generic RDMA READ/WRITE API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 308aa2b8f7b7db3332a7d41099fd37851fb793b2 upstream.
Once the qp has been flushed, it cannot be flushed again. The user qp
flush logic wasn't enforcing it however. The bug can cause
touch-after-free crashes like:
Unable to handle kernel paging request for data at address 0x000001ec
Faulting instruction address: 0xc008000016069100
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c008000016069100] flush_qp+0x80/0x480 [iw_cxgb4]
LR [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4]
Call Trace:
[c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4]
[c00800001606e868] c4iw_ib_modify_qp+0x118/0x200 [iw_cxgb4]
[c0080000119eae80] ib_security_modify_qp+0xd0/0x3d0 [ib_core]
[c0080000119c4e24] ib_modify_qp+0xc4/0x2c0 [ib_core]
[c008000011df0284] iwcm_modify_qp_err+0x44/0x70 [iw_cm]
[c008000011df0fec] destroy_cm_id+0xcc/0x370 [iw_cm]
[c008000011ed4358] rdma_destroy_id+0x3c8/0x520 [rdma_cm]
[c0080000134b0540] ucma_close+0x90/0x1b0 [rdma_ucm]
[c000000000444da4] __fput+0xe4/0x2f0
So fix flush_qp() to only flush the wq once.
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 816e846c2eb9129a3e0afa5f920c8bbc71efecaa upstream.
Inside of start_xmit() the call to check if the connection is up and the
queueing of the packets for later transmission is not atomic which leaves
a window where cm_rep_handler can run, set the connection up, dequeue
pending packets and leave the subsequently queued packets by start_xmit()
sitting on neigh->queue until they're dropped when the connection is torn
down. This only applies to connected mode. These dropped packets can
really upset TCP, for example, and cause multi-minute delays in
transmission for open connections.
Here's the code in start_xmit where we check to see if the connection is
up:
if (ipoib_cm_get(neigh)) {
if (ipoib_cm_up(neigh)) {
ipoib_cm_send(dev, skb, ipoib_cm_get(neigh));
goto unref;
}
}
The race occurs if cm_rep_handler execution occurs after the above
connection check (specifically if it gets to the point where it acquires
priv->lock to dequeue pending skb's) but before the below code snippet in
start_xmit where packets are queued.
if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) {
push_pseudo_header(skb, phdr->hwaddr);
spin_lock_irqsave(&priv->lock, flags);
__skb_queue_tail(&neigh->queue, skb);
spin_unlock_irqrestore(&priv->lock, flags);
} else {
++dev->stats.tx_dropped;
dev_kfree_skb_any(skb);
}
The patch acquires the netif tx lock in cm_rep_handler for the section
where it sets the connection up and dequeues and retransmits deferred
skb's.
Fixes: 839fcaba355a ("IPoIB: Connected mode experimental support")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Knister <aaron.s.knister@nasa.gov>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 954a8e3aea87e896e320cf648c1a5bbe47de443e upstream.
When AF_IB addresses are used during rdma_resolve_addr() a lock is not
held. A cma device can get removed while list traversal is in progress
which may lead to crash. ie
CPU0 CPU1
==== ====
rdma_resolve_addr()
cma_resolve_ib_dev()
list_for_each() cma_remove_one()
cur_dev->device mutex_lock(&lock)
list_del();
mutex_unlock(&lock);
cma_process_remove();
Therefore, hold a lock while traversing the list which avoids such
situation.
Cc: <stable@vger.kernel.org> # 3.10
Fixes: f17df3b0dede ("RDMA/cma: Add support for AF_IB to rdma_resolve_addr()")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 536ca245c512aedfd84cde072d7b3ca14b6e1792 ]
According to "Annex A16: RDMA over Converged Ethernet (RoCE)":
A16.4.3 MANAGEMENT INTERFACES
As defined in the base specification, a special Queue Pair, QP0 is defined
solely for communication between subnet manager(s) and subnet management
agents. Since such an IB-defined subnet management architecture is outside
the scope of this annex, it follows that there is also no requirement that
a port which conforms to this annex be associated with a QP0. Thus, for
end nodes designed to conform to this annex, the concept of QP0 is
undefined and unused for any port connected to an Ethernet network.
CA16-8: A packet arriving at a RoCE port containing a BTH with the
destination QP field set to QP0 shall be silently dropped.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 643d213a9a034fa04f5575a40dfc8548e33ce04f ]
Currently if the cm_id is not bound to any netdevice, than for such cm_id,
net namespace is ignored; which is incorrect.
Regardless of cm_id bound to a netdevice or not, net namespace must
match. When a cm_id is bound to a netdevice, in such case net namespace
and netdevice both must match.
Fixes: 4c21b5bcef73 ("IB/cma: Add net_dev and private data checks to RDMA CM")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c93496f18ce5044d78e4f7f9e018682a4f44b3d upstream.
This fixes a over-read condition detected by FORTIFY_SOURCE for this
line:
memcpy(SKB_TO_PKT(skb), &ack_pkt, sizeof(skb->cb));
The error was:
In file included from ./include/linux/bitmap.h:8:0,
from ./include/linux/cpumask.h:11,
from ./include/linux/mm_types_task.h:13,
from ./include/linux/mm_types.h:4,
from ./include/linux/kmemcheck.h:4,
from ./include/linux/skbuff.h:18,
from drivers/infiniband/sw/rxe/rxe_resp.c:34:
In function 'memcpy',
inlined from 'send_atomic_ack.constprop' at drivers/infiniband/sw/rxe/rxe_resp.c:998:2,
inlined from 'acknowledge' at drivers/infiniband/sw/rxe/rxe_resp.c:1026:3,
inlined from 'rxe_responder' at drivers/infiniband/sw/rxe/rxe_resp.c:1286:10:
./include/linux/string.h:309:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter
__read_overflow2();
Daniel Micay noted that struct rxe_pkt_info is 32 bytes on 32-bit
architectures, but skb->cb is still 64. The memcpy() over-reads 32
bytes. This fixes it by zeroing the unused bytes in skb->cb.
Link: http://lkml.kernel.org/r/1497903987-21002-5-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Moni Shoua <monis@mellanox.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a1ceeca679dccc492235f0f629d9e9f7b3d51ca8 ]
hns bitmap allocation functions return 0 on success and -1 on failure.
Callers of these functions wrongly used their return value as an errno,
fix that by making a proper conversion.
Fixes: a598c6f4c5a8 ("IB/hns: Simplify function of pd alloc and qp alloc")
Signed-off-by: Gal Pressman <pressmangal@gmail.com>
Acked-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 61b717d041b1976530f68f8b539b2e3a7dd8e39c upstream.
Every function that returns COMPST_ERROR must set wqe->status to another
value than IB_WC_SUCCESS before returning COMPST_ERROR. Fix the only code
path for which this is not yet the case.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 995250959d22fc341b5424e3343b0ce5df672461 upstream.
Avoid that KASAN reports the following:
BUG: KASAN: use-after-free in srpt_close_ch+0x4f/0x1b0 [ib_srpt]
Read of size 4 at addr ffff880151180cb8 by task check/4681
CPU: 15 PID: 4681 Comm: check Not tainted 4.18.0-rc2-dbg+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0xa4/0xf5
print_address_description+0x6f/0x270
kasan_report+0x241/0x360
__asan_load4+0x78/0x80
srpt_close_ch+0x4f/0x1b0 [ib_srpt]
srpt_set_enabled+0xf7/0x1e0 [ib_srpt]
srpt_tpg_enable_store+0xb8/0x120 [ib_srpt]
configfs_write_file+0x14e/0x1d0 [configfs]
__vfs_write+0xd2/0x3b0
vfs_write+0x101/0x270
ksys_write+0xab/0x120
__x64_sys_write+0x43/0x50
do_syscall_64+0x77/0x230
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: aaf45bd83eba ("IB/srpt: Detect session shutdown reliably")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d63c46734c545ad0488761059004a65c46efdde3 ]
Fix memory leak in the error path of mlx5_ib_create_srq() by making sure
to free the allocated srq.
Fixes: c2b37f76485f ("IB/mlx5: Fix integer overflows in mlx5_ib_create_srq")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 375dc53d032fc11e98036b5f228ad13f7c5933f5 ]
Run the completer task to post a work completion after processing
a memory registration or invalidate work request. This covers the
case where the memory registration or invalidate was the last work
request posted to the qp.
Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Reviewed-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 062d0f22a30c39840ea49b72cfcfc1aa4cc538fa upstream.
In write to debugfs file 'resource_stats' the local buffer 'tmp_str' is
written at index 'count-1' where 'count' is the size of the write, so
potentially 0.
This patch filters odd values for the write size/position to avoid this
type of problem.
Signed-off-by: Michael Mera <dev@michaelmera.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d8f9cc328c8888369880e2527e9186d745f2bbf6 upstream.
To allow rereg_user_mr to modify the MR from read-only to writable without
using get_user_pages again, we needed to define the initial MR as writable.
However, this was originally done unconditionally, without taking into
account the writability of the underlying virtual memory.
As a result, any attempt to register a read-only MR over read-only
virtual memory failed.
To fix this, do not add the writable flag bit when the user virtual memory
is not writable (e.g. const memory).
However, when the underlying memory is NOT writable (and we therefore
do not define the initial MR as writable), the IB core adds a
"force writable" flag to its user-pages request. If this succeeds,
the reg_user_mr caller gets a writable copy of the original pages.
If the user-space caller then does a rereg_user_mr operation to enable
writability, this will succeed. This should not be allowed, since
the original virtual memory was not writable.
Cc: <stable@vger.kernel.org>
Fixes: 9376932d0c26 ("IB/mlx4_ib: Add support for user MR re-registration")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08bb558ac11ab944e0539e78619d7b4c356278bd upstream.
Make the MR writability flags check, which is performed in umem.c,
a static inline function in file ib_verbs.h
This allows the function to be used by low-level infiniband drivers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b697d7d8c741f27b728a878fc55852b06d0f6f5e upstream.
The __get_txreq() function can return a pointer, ERR_PTR(-EBUSY), or NULL.
All of the relevant call sites look for IS_ERR, so the NULL return would
lead to a NULL pointer exception.
Do not use the ERR_PTR mechanism for this function.
Update all call sites to handle the return value correctly.
Clean up error paths to reflect return value.
Fixes: 45842abbb292 ("staging/rdma/hfi1: move txreq header code")
Cc: <stable@vger.kernel.org> # 4.9.x+
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 940efcc8889f0d15567eb07fc9fd69b06e366aa5 upstream.
Flows can be created on UD and RAW_PACKET QP types. Attempts to provide
other QP types as an input causes to various unpredictable failures.
The reason is that in order to support all various types (e.g. XRC), we
are supposed to use real_qp handle and not qp handle and expect to
driver/FW to fail such (XRC) flows. The simpler and safer variant is to
ban all QP types except UD and RAW_PACKET, instead of relying on
driver/FW.
Cc: <stable@vger.kernel.org> # 3.11
Fixes: 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs")
Cc: syzkaller <syzkaller@googlegroups.com>
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2468b82d69e3a53d024f28d79ba0fdb8bf43dfbf ]
Let's perform checks in-place instead of BUG_ONs.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cb2595c1393b4a5211534e6f0a0fbad369e21ad8 ]
ucma_process_join() will free the new allocated "mc" struct,
if there is any error after that, especially the copy_to_user().
But in parallel, ucma_leave_multicast() could find this "mc"
through idr_find() before ucma_process_join() frees it, since it
is already published.
So "mc" could be used in ucma_leave_multicast() after it is been
allocated and freed in ucma_process_join(), since we don't refcnt
it.
Fix this by separating "publish" from ID allocation, so that we
can get an ID first and publish it later after copy_to_user().
Fixes: c8f6a362bf3e ("RDMA/cma: Add multicast communication support")
Reported-by: Noam Rathaus <noamr@beyondsecurity.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7a8690ed6f5346f6738971892205e91d39b6b901 upstream.
In commit 357d23c811a7 ("Remove the obsolete libibcm library")
in rdma-core [1], we removed obsolete library which used the
/dev/infiniband/ucmX interface.
Following multiple syzkaller reports about non-sanitized
user input in the UCMA module, the short audit reveals the same
issues in UCM module too.
It is better to disable this interface in the kernel,
before syzkaller team invests time and energy to harden
this unused interface.
[1] https://github.com/linux-rdma/rdma-core/pull/279
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7b72717a20bba8bdd01b14c0460be7d15061cd6b upstream.
The code was mistakenly using the length of the page array memory instead
of the depth of the page array.
This would cause MR creation to fail in some cases.
Fixes: 8376b86de7d3 ("iw_cxgb4: Support the new memory registration API")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1bc0299d976e000ececc6acd76e33b4582646cb7 upstream.
The following code fails to allocate a buffer for the
tail address that the hardware DMAs into when the user
context DMA_RTAIL is set.
if (HFI1_CAP_KGET_MASK(rcd->flags, DMA_RTAIL)) {
rcd->rcvhdrtail_kvaddr = dma_zalloc_coherent(
&dd->pcidev->dev, PAGE_SIZE, &dma_hdrqtail,
gfp_flags);
if (!rcd->rcvhdrtail_kvaddr)
goto bail_free;
rcd->rcvhdrqtailaddr_dma = dma_hdrqtail;
}
So the rcvhdrtail_kvaddr would then be NULL.
The mmap logic fails to check for a NULL rcvhdrtail_kvaddr.
The fix is to test for both user and kernel DMA_TAIL options
during the allocation as well as testing for a NULL
rcvhdrtail_kvaddr during the mmap processing.
Additionally, all downstream testing of the capmask for DMA_RTAIL
have been eliminated in favor of testing rcvhdrtail_kvaddr.
Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b1ca7ece15e94251d1d0d919f813943e4a58059 upstream.
There is no need to crash the machine if unknown work request was
received in SQP MAD.
Cc: <stable@vger.kernel.org> # 3.6
Fixes: 37bfc7c1e83f ("IB/mlx4: SR-IOV multiplex and demultiplex MADs")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0e12af84cdd3056460f928adc164f9e87f4b303b upstream.
A copy/paste bug (probably) caused setting of an app_tag check mask
in case where a ref_tag check was needed.
Fixes: 38a2d0d429f1 ("IB/isert: convert to the generic RDMA READ/WRITE API")
Fixes: 9e961ae73c2c ("IB/isert: Support T10-PI protected transactions")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 763b69654bfb88ea3230d015e7d755ee8339f8ee upstream.
The following error message occurs on a target host in a debug build
during session login:
[ 3524.411874] WARNING: CPU: 5 PID: 12063 at lib/dma-debug.c:1207 check_sync+0x4ec/0x5b0
[ 3524.421057] infiniband hfi1_0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x0000000000000000] [size=76 bytes]
......snip .....
[ 3524.535846] CPU: 5 PID: 12063 Comm: iscsi_np Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1
[ 3524.546764] Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.2.6 06/08/2015
[ 3524.555740] Call Trace:
[ 3524.559102] [<ffffffffa5fe915b>] dump_stack+0x19/0x1b
[ 3524.565477] [<ffffffffa58a2f58>] __warn+0xd8/0x100
[ 3524.571557] [<ffffffffa58a2fdf>] warn_slowpath_fmt+0x5f/0x80
[ 3524.578610] [<ffffffffa5bf5b8c>] check_sync+0x4ec/0x5b0
[ 3524.585177] [<ffffffffa58efc3f>] ? set_cpus_allowed_ptr+0x5f/0x1c0
[ 3524.592812] [<ffffffffa5bf5cd0>] debug_dma_sync_single_for_cpu+0x80/0x90
[ 3524.601029] [<ffffffffa586add3>] ? x2apic_send_IPI_mask+0x13/0x20
[ 3524.608574] [<ffffffffa585ee1b>] ? native_smp_send_reschedule+0x5b/0x80
[ 3524.616699] [<ffffffffa58e9b76>] ? resched_curr+0xf6/0x140
[ 3524.623567] [<ffffffffc0879af0>] isert_create_send_desc.isra.26+0xe0/0x110 [ib_isert]
[ 3524.633060] [<ffffffffc087af95>] isert_put_login_tx+0x55/0x8b0 [ib_isert]
[ 3524.641383] [<ffffffffa58ef114>] ? try_to_wake_up+0x1a4/0x430
[ 3524.648561] [<ffffffffc098cfed>] iscsi_target_do_tx_login_io+0xdd/0x230 [iscsi_target_mod]
[ 3524.658557] [<ffffffffc098d827>] iscsi_target_do_login+0x1a7/0x600 [iscsi_target_mod]
[ 3524.668084] [<ffffffffa59f9bc9>] ? kstrdup+0x49/0x60
[ 3524.674420] [<ffffffffc098e976>] iscsi_target_start_negotiation+0x56/0xc0 [iscsi_target_mod]
[ 3524.684656] [<ffffffffc098c2ee>] __iscsi_target_login_thread+0x90e/0x1070 [iscsi_target_mod]
[ 3524.694901] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod]
[ 3524.705446] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod]
[ 3524.715976] [<ffffffffc098ca78>] iscsi_target_login_thread+0x28/0x60 [iscsi_target_mod]
[ 3524.725739] [<ffffffffa58d60ff>] kthread+0xef/0x100
[ 3524.732007] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80
[ 3524.739540] [<ffffffffa5fff1b7>] ret_from_fork_nospec_begin+0x21/0x21
[ 3524.747558] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80
[ 3524.755088] ---[ end trace 23f8bf9238bd1ed8 ]---
[ 3595.510822] iSCSI/iqn.1994-05.com.redhat:537fa56299: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION.
The code calls dma_sync on login_tx_desc->dma_addr prior to initializing it
with dma-mapped address.
login_tx_desc is a part of iser_conn structure and is used only once
during login negotiation, so the issue is fixed by eliminating
dma_sync call for this buffer using a special case routine.
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7b74a83cf54a3747e22c57e25712bd70eef8acee upstream.
On fatal error the driver simulates CQE's for ULPs that rely on
completion of all their posted work-request.
For the GSI traffic, the mlx5 has its own mechanism that sends the
completions via software CQE's directly to the relevant CQ.
This should be kept in fatal error too, so the driver should simulate
such CQE's with the specified error state in order to complete GSI QP
work requests.
Without the fix the next deadlock might appears:
schedule_timeout+0x274/0x350
wait_for_common+0xec/0x240
mcast_remove_one+0xd0/0x120 [ib_core]
ib_unregister_device+0x12c/0x230 [ib_core]
mlx5_ib_remove+0xc4/0x270 [mlx5_ib]
mlx5_detach_device+0x184/0x1a0 [mlx5_core]
mlx5_unload_one+0x308/0x340 [mlx5_core]
mlx5_pci_err_detected+0x74/0xe0 [mlx5_core]
Cc: <stable@vger.kernel.org> # 4.7
Fixes: 89ea94a7b6c4 ("IB/mlx5: Reset flow support for IB kernel ULPs")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d3e71136a080d007620472f50c7b3e63ba0f5cf upstream.
A warm restart will fail to unload the driver, leaving link state
potentially flapping up to the point the BIOS resets the adapter.
Correct the issue by hooking the shutdown pci method,
which will bring port down.
Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0252f73334f9ef68868e4684200bea3565a4fcee upstream.
The following error occurs in a debug build when running MPI PSM:
[ 307.415911] WARNING: CPU: 4 PID: 23867 at lib/dma-debug.c:1158
check_unmap+0x4ee/0xa20
[ 307.455661] ib_qib 0000:05:00.0: DMA-API: device driver failed to check map
error[device address=0x00000000df82b000] [size=4096 bytes] [mapped as page]
[ 307.517494] Modules linked in:
[ 307.531584] ib_isert iscsi_target_mod ib_srpt target_core_mod rpcrdma
sunrpc ib_srp scsi_transport_srp scsi_tgt ib_iser libiscsi ib_ipoib
scsi_transport_iscsi rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm
ib_qib intel_powerclamp coretemp rdmavt intel_rapl iosf_mbi kvm_intel kvm
irqbypass crc32_pclmul ghash_clmulni_intel ipmi_ssif ib_core aesni_intel sg
ipmi_si lrw gf128mul dca glue_helper ipmi_devintf iTCO_wdt gpio_ich hpwdt
iTCO_vendor_support ablk_helper hpilo acpi_power_meter cryptd ipmi_msghandler
ie31200_edac shpchp pcc_cpufreq lpc_ich pcspkr ip_tables xfs libcrc32c sd_mod
crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea
sysfillrect sysimgblt fb_sys_fops ttm ahci crct10dif_pclmul crct10dif_common
drm crc32c_intel libahci tg3 libata serio_raw ptp i2c_core
[ 307.846113] pps_core dm_mirror dm_region_hash dm_log dm_mod
[ 307.866505] CPU: 4 PID: 23867 Comm: mpitests-IMB-MP Kdump: loaded Not
tainted 3.10.0-862.el7.x86_64.debug #1
[ 307.911178] Hardware name: HP ProLiant DL320e Gen8, BIOS J05 11/09/2013
[ 307.944206] Call Trace:
[ 307.956973] [<ffffffffbd9e915b>] dump_stack+0x19/0x1b
[ 307.982201] [<ffffffffbd2a2f58>] __warn+0xd8/0x100
[ 308.005999] [<ffffffffbd2a2fdf>] warn_slowpath_fmt+0x5f/0x80
[ 308.034260] [<ffffffffbd5f667e>] check_unmap+0x4ee/0xa20
[ 308.060801] [<ffffffffbd41acaa>] ? page_add_file_rmap+0x2a/0x1d0
[ 308.090689] [<ffffffffbd5f6c4d>] debug_dma_unmap_page+0x9d/0xb0
[ 308.120155] [<ffffffffbd4082e0>] ? might_fault+0xa0/0xb0
[ 308.146656] [<ffffffffc07761a5>] qib_tid_free.isra.14+0x215/0x2a0 [ib_qib]
[ 308.180739] [<ffffffffc0776bf4>] qib_write+0x894/0x1280 [ib_qib]
[ 308.210733] [<ffffffffbd540b00>] ? __inode_security_revalidate+0x70/0x80
[ 308.244837] [<ffffffffbd53c2b7>] ? security_file_permission+0x27/0xb0
[ 308.266025] qib_ib0.8006: multicast join failed for
ff12:401b:8006:0000:0000:0000:ffff:ffff, status -22
[ 308.323421] [<ffffffffbd46f5d3>] vfs_write+0xc3/0x1f0
[ 308.347077] [<ffffffffbd492a5c>] ? fget_light+0xfc/0x510
[ 308.372533] [<ffffffffbd47045a>] SyS_write+0x8a/0x100
[ 308.396456] [<ffffffffbd9ff355>] system_call_fastpath+0x1c/0x21
The code calls a qib_map_page() which has never correctly tested for a
mapping error.
Fix by testing for pci_dma_mapping_error() in all cases and properly
handling the failure in the caller.
Additionally, streamline qib_map_page() arguments to satisfy just
the single caller.
Cc: <stable@vger.kernel.org>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Tested-by: Don Dutile <ddutile@redhat.com>
Reviewed-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
