summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen/Makefile
AgeCommit message (Collapse)Author
2013-09-03Add AR1010 serial touch screen, enable it in s_defconfigEric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-09-03add ar1021 touchscreenTroy Kisky
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-09-03add focaltech-ft5x06 5-finger multi-touch driverEric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-09-03add tsc2004 resistive touch driverEric Nelson
2013-09-03fix execute permissionsTroy Kisky
2012-11-27ENGR00234781 input: add novatek touch screen driver.Zhang Jiejing
This patch add device drvier for novatek touch screen driver. This touch screen chip will be support because it have more populary screen size. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
2012-07-20ENGR00214081-1 Input: Remove redefined Item in Kconfig And MakefileLin Fuzhen
Remove redefined Item in Kconfig And Makefile for MAX11081 Signed-off-by: Lin Fuzhen <fuzhen.lin@freescale.com>
2012-07-20ENGR00180621-1: Add ELAN capacity touch screen driverRobby Cai
Add Elan ts driver. Signed-off-by: Robby Cai <R63905@freescale.com> Acked-by: Lily Zhang
2012-07-20ENGR00139238-2 Touch: add p1003 and egalaxFrank Li
Add p1003 and egalax touch driver Signed-off-by: Frank Li <Frank.Li@freescale.com>
2012-07-20ENGR00138130-1 input: add max11801 resistance touchscreen controller driverZhang Jiejing
Add MAXI max11801 resistance touch screen controller driver, This driver use Auto Mode and Aperture Mode. Other max1180x driver can support in this driver, they use almost same register address and define, you can find a table in max11801_ts.c You can find data sheet under this link: http://www.maxim-ic.com/datasheet/index.mvp/id/5943 Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
2012-07-20ENGR00141391-2 PMIC: porting da9053 to i.mx platformZhou Jingyu
Fix da9053 backlight Kconfig error porting da9052 regulator driver Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Acked-by: Lily Zhang <r58066@freescale.com>
2012-07-20ENGR00141217-7 touch: p1003 touch screen driver for 2.6.38Frank Li
add p1003 Signed-off-by: Frank Li <Frank.Li@freescale.com>
2011-04-11Input: add driver for Maxim max11801 touchscreen controllerZhang Jiejing
Add MAXI max11801 resistive touchscreen controller driver. This driver uses Auto Mode and Aperture Mode. Support for other max1180x devices can be added to this driver as well, as they use almost the same register addresses and codes. You can find data sheet here: http://www.maxim-ic.com/datasheet/index.mvp/id/5943 Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Merge branch 'tsc2005' into nextDmitry Torokhov
2011-03-16Input: introduce tsc2005 driverLauri Leukkunen
Discussions: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg26748.html Introduce a driver for the Texas Instruments TSC2005 touchscreen controller (http://focus.ti.com/docs/prod/folders/print/tsc2005.html). The patch is based on a driver by Lauri Leukkunen, with modifications by David Brownell, Phil Carmody, Imre Deak, Hiroshi DOYU, Ari Kauppi, Tony Lindgren, Jarkko Nikula, Eero Nurkkala and Roman Tereshonkov. Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com> [aaro.koskinen@nokia.com: patch description, rebasing & cleanup] Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> [ext-srikar.1.bhavanarayana@nokia.com: various fixes] Signed-off-by: Srikar <ext-srikar.1.bhavanarayana@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: qt602240_ts - rename to atmel_mxt_tsDmitry Torokhov
Since the driver will be supporting whole range of Atmels mXT touchscreen controllers we better rename it to atmel_mxt_ts. Acked-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllersMark Brown
Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-15Input: add ST1232 touchscreen controller driverTony SIM
This patch introduces support for Sitronix ST1232 integrated capacitive touchscreen with LCD module. The touchscreen is multitouch capable and can report coordinates of up to two contact points. Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com> Reviewed-by: Trilok Soni <tsoni@codeaurora.org> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-25Merge branch 'davinci-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (50 commits) davinci: fix remaining board support after io_pgoffst removal davinci: mityomapl138: make file local data static arm/davinci: remove duplicated include davinci: Initial support for Omapl138-Hawkboard davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom davinci: add tnetv107x touchscreen platform device input: add driver for tnetv107x touchscreen controller davinci: add keypad config for tnetv107x evm board davinci: add tnetv107x keypad platform device input: add driver for tnetv107x on-chip keypad controller net: davinci_emac: cleanup unused cpdma code net: davinci_emac: switch to new cpdma layer net: davinci_emac: separate out cpdma code net: davinci_emac: cleanup unused mdio emac code omap: cleanup unused davinci mdio arch code davinci: cleanup mdio arch code and switch to phy_id net: davinci_emac: switch to new mdio omap: add mdio platform devices davinci: add mdio platform devices net: davinci_emac: separate out davinci mdio ... Fix up trivial conflict in drivers/input/keyboard/Kconfig (two entries added next to each other - one from the davinci merge, one from the input merge)
2010-10-13Input: add ROHM BU21013 touch panel controller supportNaveen Kumar Gaddipati
Add the ROHM BU21013 capacitive touch panel controller support with i2c interface. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-24input: add driver for tnetv107x touchscreen controllerCyril Chemparathy
This patch adds support for tnetv107x's on-chip touchscreen controller. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-05Merge branch 'mrst-touchscreen' into nextDmitry Torokhov
Conflicts: drivers/input/touchscreen/Makefile
2010-09-01Input: mrst-touchscreen - move out of stagingDmitry Torokhov
The driver is in reasonable shape now so let's move it out of staging. Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-28Input: add LPC32xx touchscreen controller driverKevin Wells
This patch set introduces support for the LPC32xx touchscreen controller driver. The LPC32xx touchscreen controller supports automated event detection and X/Y data conversion for resistive touchscreens. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Durgesh Pattamatta <durgesh.pattamatta@nxp.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-12input: STMPE touch controller supportLuotao Fu
This one adds a driver for STMPE touchscreen controllers. This driver depends on the stmpexxx mfd core driver. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-07-31Input: cy8ctmg110 - capacitive touchscreen supportSamuli Konttila
Add support for the cy8ctmg110 capacitive touchscreen used on some embedded devices. (Some clean up by Alan Cox) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-14Input: Add ATMEL QT602240 touchscreen driverJoonyoung Shim
The chip's full name is AT42QT602240 or ATMXT224. This is a capacitive touchscreen supporting 10-contact multitouch and using I2C interface. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-03Input: ad7879 - split bus logic outMike Frysinger
The ad7879 driver is using the old bus method of only supporting one at a time (I2C or SPI). So refactor it like the other input drivers that support multiple busses simultaneously. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-28input: Touchscreen driver for TPS6507xTodd Fischer
Add touch screen input driver for TPS6507x family of multi-function chips. Uses the TPS6507x MFD driver. No interrupt support due to testing limitations of current hardware. Signed-off-by: Todd Fischer <todd.fischer@ridgerun.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-04-13Input: add driver for hampshire serial touchscreensAdam Bennett
Adds support for Hampshire TSHARC serial touchscreens. Implements Hampshire's 4-byte communication protocol. Signed-off-by: Adam Bennett <abennett72@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-13Input: remove now deprecated corgi_ts.c touchscreen driverEric Miao
The corgi touchscreen is now deprecated in favour of the generic ads7846.c driver. The noise reduction technique used in corgi_ts.c, which is to wait till vsync before ADC sampling, is also integrated into ads7846 driver now. Provided that the original driver is not generic and is difficult to maintain, it will be removed now. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-07input: Enable touch on 88pm860xHaojian Zhuang
Enable touchscreen driver for the 88pm860x multi function core. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-15Input: add mc13783 touchscreen driverSascha Hauer
This driver provides support for the touchscreen interface integrated into the Freescale MC13783. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23Input: add S3C24XX touchscreen driverArnaud Patard
S3C24XX touchscreen driver, originally written by Arnaud Patard and other contributors. The driver has had substantial testing as well as a number of tidying up passes done by Ben Dooks, as noted: - added kernel-doc comments to most of the routines - removed old code from pre adc framework days - updated device probe code to use platform id list matching - cleaned up debug, since printk() now has timestamp feature - ensure code uses dev_() reporting macros where necessary - remove ABS_PRESSURE reporting, tslib can be fixed - ensure timer is removed on driver exit - move to using dev_pmops for power management Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-10-26Input: add driver for Dynapro serial touchscreenTias Guns
This is a driver for Dynapro serial touchscreen, which used to be supported in Xorg. The driver needs updated inputattach utility to initialize serial port and create proper serio device before the driver will be bound to it. Signed-off-by: Tias Guns <tias@ulyssis.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: add driver for Atmel AT42QT2160 Sensor Chip Input: max7359 - use threaded IRQs Input: add driver for Maxim MAX7359 key switch controller Input: add driver for ADP5588 QWERTY I2C Keypad Input: add touchscreen driver for MELFAS MCS-5000 controller Input: add driver for OpenCores Keyboard Controller Input: dm355evm_keys - remove dm355evm_keys_hardirq Input: synaptics_i2c - switch to using __cancel_delayed_work() Input: ad7879 - add support for AD7889 Input: atkbd - rely on input core to restore state on resume Input: add generic suspend and resume for input devices Input: libps2 - additional locking for i8042 ports
2009-09-17Input: add touchscreen driver for MELFAS MCS-5000 controllerJoonyoung Shim
The MELPAS MCS-5000 is the touchscreen controller. The overview of this controller can see at the following website: http://www.melfas.com/product/product01.asp?k_r=eng_ This driver is tested on s3c6410 NCP board and supports only the i2c interface. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-17input: PCAP2 based touchscreen driverDaniel Ribeiro
Touchscreen driver for the PCAP2 multi function device used in Motorola EZX smartphones. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-11Input: add support for touchscreen on W90P910 ARM platformWan ZongShun
The touchscreen works in two modes, wait trigger mode and auto-semi mode. The device starts in wait trigger mode and waits until pressure is detected, then device sets WT_INT bit and raises an interrupt. The driver should put the device into auto-semi mode and prepare for reading first X and then Y coordinates. When coordinate data is ready the driver sets ADC_INT bit and raises interrupt again. [dtor@mail.ru: various cleanups] Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-19Input: add driver for EETI touchpanelsDaniel Mack
This patch adds a driver for EETI's I2C connected touchscreens. Signed-off-by: Daniel Mack <daniel@caiaq.de> Tested-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-18Input: add wm97xx accelerated driver for Atmel microprocessorsHans-Christian Egtvedt
This patch adds an accelerated driver for Atmel AVR32 AT32AP700X microprocessors. It uses interrupts on the channel B in the AC97 controller. Thus, offloading the work queue in the wm97xx-ts driver. The driver has been tested with Atmel AVR32 AT32AP7000 and Wolfson WM9712 codec. The driver can also be easily modified to support Atmel AT91 devices, as AT91 and AVR32 share the same AC97C module. [Fixed leak of atmel_wm97xx when probe fails. -- broonie] [dtor@mail.ru: do not report ABS_PRESSURE events when not measuring pressure] Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09Input: add AD7879 Touchscreen driverMichael Hennerich
[randy.dunlap@oracle.com: don't use bus_id] [dtor@mail.ru: locking and other fixups] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09Input: add AD7877 touchscreen driverMichael Hennerich
[dtor@mail.ru: locking and other fixups] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-08Input: add accelerated touchscreen support for Marvell ZyloniteMark Brown
This patch implements accelerated touchscreen support for the Marvell Zylonite development platform, supporting pen down interrupts and continuous mode data transfers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-23Input: add da9034 touchscreen supportEric Miao
Add support for the built-in touchscreen controller in DA9034 (aka Micco), usually found on platforms with xscale processors. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-20Input: add tsc2007 based touchscreen driverKwangwoo Lee
This drive has been tested on ARM9 based SoC - MV86XX. Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-11-24Input: add support for Wacom W8001 penabled serial touchscreenJaya Kumar
The Wacom W8001 sensor is a sensor device (uses electromagnetic resonance) and it is interfaced via its serial microcontroller to the host. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-23Input: add driver for Atmel integrated touchscreen controllerDan Liang
The AT91SAM9RL SoC integrates a Touchscreen Controller which can trigger ADC conversion periodically. Signed-off-by: Justin Waters <justin.waters@timesys.com> Signed-off-by: Dan Liang <dan.liang@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-07Input: add driver for Tabletkiosk Sahara TouchIT-213 touchscreenClaudio Nieder
Signed-off-by: Claudio Nieder <private@claudio.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-30Input: Add driver for iNexio serial touchscreen.Richard Lemon
Signed-off-by: Richard Lemon <richard@codelemon.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-19 23:21:53 +0000