summaryrefslogtreecommitdiff
path: root/drivers/iommu
AgeCommit message (Collapse)Author
2020-04-24iommu/amd: Fix the configuration of GCR3 table root pointerAdrian Huang
[ Upstream commit c20f36534666e37858a14e591114d93cc1be0d34 ] The SPA of the GCR3 table root pointer[51:31] masks 20 bits. However, this requires 21 bits (Please see the AMD IOMMU specification). This leads to the potential failure when the bit 51 of SPA of the GCR3 table root pointer is 1'. Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Fixes: 52815b75682e2 ("iommu/amd: Add support for IOMMUv2 domain mode") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-20iommu/vt-d: Ignore devices with out-of-spec domain numberDaniel Drake
commit da72a379b2ec0bad3eb265787f7008bead0b040c upstream. VMD subdevices are created with a PCI domain ID of 0x10000 or higher. These subdevices are also handled like all other PCI devices by dmar_pci_bus_notifier(). However, when dmar_alloc_pci_notify_info() take records of such devices, it will truncate the domain ID to a u16 value (in info->seg). The device at (e.g.) 10000:00:02.0 is then treated by the DMAR code as if it is 0000:00:02.0. In the unlucky event that a real device also exists at 0000:00:02.0 and also has a device-specific entry in the DMAR table, dmar_insert_dev_scope() will crash on:   BUG_ON(i >= devices_cnt); That's basically a sanity check that only one PCI device matches a single DMAR entry; in this case we seem to have two matching devices. Fix this by ignoring devices that have a domain number higher than what can be looked up in the DMAR table. This problem was carefully diagnosed by Jian-Hong Pan. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Daniel Drake <drake@endlessm.com> Fixes: 59ce0515cdaf3 ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-20iommu/vt-d: Fix the wrong printing in RHSA parsingZhenzhong Duan
commit b0bb0c22c4db623f2e7b1a471596fbf1c22c6dc5 upstream. When base address in RHSA structure doesn't match base address in each DRHD structure, the base address in last DRHD is printed out. This doesn't make sense when there are multiple DRHD units, fix it by printing the buggy RHSA's base address. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com> Fixes: fd0c8894893cb ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-20iommu/vt-d: Fix a bug in intel_iommu_iova_to_phys() for huge pageYonghyun Hwang
commit 77a1bce84bba01f3f143d77127b72e872b573795 upstream. intel_iommu_iova_to_phys() has a bug when it translates an IOVA for a huge page onto its corresponding physical address. This commit fixes the bug by accomodating the level of page entry for the IOVA and adds IOVA's lower address to the physical address. Cc: <stable@vger.kernel.org> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Yonghyun Hwang <yonghyun@google.com> Fixes: 3871794642579 ("VT-d: Changes to support KVM") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-20iommu/vt-d: dmar: replace WARN_TAINT with pr_warn + add_taintHans de Goede
commit 59833696442c674acbbd297772ba89e7ad8c753d upstream. Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Some distros, e.g. Fedora, have tools watching for the kernel backtraces logged by the WARN macros and offer the user an option to file a bug for this when these are encountered. The WARN_TAINT in warn_invalid_dmar() + another iommu WARN_TAINT, addressed in another patch, have lead to over a 100 bugs being filed this way. This commit replaces the WARN_TAINT("...") calls, with pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) calls avoiding the backtrace and thus also avoiding bug-reports being filed about this against the kernel. Fixes: fd0c8894893c ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables") Fixes: e625b4a95d50 ("iommu/vt-d: Parse ANDD records") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200309140138.3753-2-hdegoede@redhat.com BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1564895 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-20iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with pr_warn + ↵Hans de Goede
add_taint commit 81ee85d0462410de8eeeec1b9761941fd6ed8c7b upstream. Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Fixes: 556ab45f9a77 ("ioat2: catch and recover from broken vtd configurations v6") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200309182510.373875-1-hdegoede@redhat.com BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=701847 Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STEWill Deacon
[ Upstream commit d71e01716b3606a6648df7e5646ae12c75babde4 ] If, for some bizarre reason, the compiler decided to split up the write of STE DWORD 0, we could end up making a partial structure valid. Although this probably won't happen, follow the example of the context-descriptor code and use WRITE_ONCE() to ensure atomicity of the write. Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-29iommu/amd: Wait for completion of IOTLB flush in attach_deviceFilippo Sironi
[ Upstream commit 0b15e02f0cc4fb34a9160de7ba6db3a4013dc1b7 ] To make sure the domain tlb flush completes before the function returns, explicitly wait for its completion. Signed-off-by: Filippo Sironi <sironi@amazon.de> Fixes: 42a49f965a8d ("amd-iommu: flush domain tlb when attaching a new device") [joro: Added commit message and fixes tag] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-29iommu/amd: Make iommu_disable saferKevin Mitchell
[ Upstream commit 3ddbe913e55516d3e2165d43d4d5570761769878 ] Make it safe to call iommu_disable during early init error conditions before mmio_base is set, but after the struct amd_iommu has been added to the amd_iommu_list. For example, this happens if firmware fails to fill in mmio_phys in the ACPI table leading to a NULL pointer dereference in iommu_feature_disable. Fixes: 2c0ae1720c09c ('iommu/amd: Convert iommu initialization to state machine') Signed-off-by: Kevin Mitchell <kevmitch@arista.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-29iommu: Use right function to get group for deviceLu Baolu
[ Upstream commit 57274ea25736496ee019a5c40479855b21888839 ] The iommu_group_get_for_dev() will allocate a group for a device if it isn't in any group. This isn't the use case in iommu_request_dm_for_dev(). Let's use iommu_group_get() instead. Fixes: d290f1e70d85a ("iommu: Introduce iommu_request_dm_for_dev()") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-29iommu/vt-d: Make kernel parameter igfx_off work with vIOMMULu Baolu
[ Upstream commit 5daab58043ee2bca861068e2595564828f3bc663 ] The kernel parameter igfx_off is used by users to disable DMA remapping for the Intel integrated graphic device. It was designed for bare metal cases where a dedicated IOMMU is used for graphic. This doesn't apply to virtual IOMMU case where an include-all IOMMU is used. This makes the kernel parameter work with virtual IOMMU as well. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Suggested-by: Kevin Tian <kevin.tian@intel.com> Fixes: c0771df8d5297 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23iommu: Remove device link to group on failureJon Derrick
commit 7d4e6ccd1fb09dbfbc49746ca82bd5c25ad4bfe4 upstream. This adds the missing teardown step that removes the device link from the group when the device addition fails. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Fixes: 797a8b4d768c5 ("iommu: Handle default domain attach failure") Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04iommu/tegra-smmu: Fix page tables in > 4 GiB memoryThierry Reding
[ Upstream commit 96d3ab802e4930a29a33934373157d6dff1b2c7e ] Page tables that reside in physical memory beyond the 4 GiB boundary are currently not working properly. The reason is that when the physical address for page directory entries is read, it gets truncated at 32 bits and can cause crashes when passing that address to the DMA API. Fix this by first casting the PDE value to a dma_addr_t and then using the page frame number mask for the SMMU instance to mask out the invalid bits, which are typically used for mapping attributes, etc. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05iommu/amd: Fix NULL dereference bug in match_hid_uidAaron Ma
[ Upstream commit bb6bccba390c7d743c1e4427de4ef284c8cc6869 ] Add a non-NULL check to fix potential NULL pointer dereference Cleanup code to call function once. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Fixes: 2bf9a0a12749b ('iommu/amd: Add iommu support for ACPI HID devices') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-05iommu/amd: Silence warnings under memory pressureQian Cai
[ Upstream commit 3d708895325b78506e8daf00ef31549476e8586a ] When running heavy memory pressure workloads, the system is throwing endless warnings, smartpqi 0000:23:00.0: AMD-Vi: IOMMU mapping error in map_sg (io-pages: 5 reason: -12) Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 swapper/10: page allocation failure: order:0, mode:0xa20(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0,4 Call Trace: <IRQ> dump_stack+0x62/0x9a warn_alloc.cold.43+0x8a/0x148 __alloc_pages_nodemask+0x1a5c/0x1bb0 get_zeroed_page+0x16/0x20 iommu_map_page+0x477/0x540 map_sg+0x1ce/0x2f0 scsi_dma_map+0xc6/0x160 pqi_raid_submit_scsi_cmd_with_io_request+0x1c3/0x470 [smartpqi] do_IRQ+0x81/0x170 common_interrupt+0xf/0xf </IRQ> because the allocation could fail from iommu_map_page(), and the volume of this call could be huge which may generate a lot of serial console output and cosumes all CPUs. Fix it by silencing the warning in this call site, and there is still a dev_err() later to notify the failure. Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21iommu/amd: Fix race in increase_address_space()Joerg Roedel
[ Upstream commit 754265bcab78a9014f0f99cd35e0d610fcd7dfa7 ] After the conversion to lock-less dma-api call the increase_address_space() function can be called without any locking. Multiple CPUs could potentially race for increasing the address space, leading to invalid domain->mode settings and invalid page-tables. This has been happening in the wild under high IO load and memory pressure. Fix the race by locking this operation. The function is called infrequently so that this does not introduce a performance regression in the dma-api path again. Reported-by: Qian Cai <cai@lca.pw> Fixes: 256e4621c21a ('iommu/amd: Make use of the generic IOVA allocator') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-06iommu/dma: Handle SG length overflow betterRobin Murphy
[ Upstream commit ab2cbeb0ed301a9f0460078e91b09f39958212ef ] Since scatterlist dimensions are all unsigned ints, in the relatively rare cases where a device's max_segment_size is set to UINT_MAX, then the "cur_len + s_length <= max_len" check in __finalise_sg() will always return true. As a result, the corner case of such a device mapping an excessively large scatterlist which is mergeable to or beyond a total length of 4GB can lead to overflow and a bogus truncated dma_length in the resulting segment. As we already assume that any single segment must be no longer than max_len to begin with, this can easily be addressed by reshuffling the comparison. Fixes: 809eac54cdd6 ("iommu/dma: Implement scatterlist segment merging") Reported-by: Nicolin Chen <nicoleotsuka@gmail.com> Tested-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-25iommu/amd: Move iommu_init_pci() to .init sectionJoerg Roedel
commit 24d2c521749d8547765b555b7a85cca179bb2275 upstream. The function is only called from another __init function, so it should be moved to .init too. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22iommu/vt-d: Set intel_iommu_gfx_mapped correctlyLu Baolu
[ Upstream commit cf1ec4539a50bdfe688caad4615ca47646884316 ] The intel_iommu_gfx_mapped flag is exported by the Intel IOMMU driver to indicate whether an IOMMU is used for the graphic device. In a virtualized IOMMU environment (e.g. QEMU), an include-all IOMMU is used for graphic device. This flag is found to be clear even the IOMMU is used. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Reported-by: Zhenyu Wang <zhenyuw@linux.intel.com> Fixes: c0771df8d5297 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.") Suggested-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-25iommu/tegra-smmu: Fix invalid ASID bits on Tegra30/114Dmitry Osipenko
commit 43a0541e312f7136e081e6bf58f6c8a2e9672688 upstream. Both Tegra30 and Tegra114 have 4 ASID's and the corresponding bitfield of the TLB_FLUSH register differs from later Tegra generations that have 128 ASID's. In a result the PTE's are now flushed correctly from TLB and this fixes problems with graphics (randomly failing tests) on Tegra30. Cc: stable <stable@vger.kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-10iommu/amd: Set exclusion range correctlyJoerg Roedel
[ Upstream commit 3c677d206210f53a4be972211066c0f1cd47fe12 ] The exlcusion range limit register needs to contain the base-address of the last page that is part of the range, as bits 0-11 of this register are treated as 0xfff by the hardware for comparisons. So correctly set the exclusion range in the hardware to the last page which is _in_ the range. Fixes: b2026aa2dce44 ('x86, AMD IOMMU: add functions for programming IOMMU MMIO space') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-20iommu/dmar: Fix buffer overflow during PCI bus notificationJulia Cartwright
[ Upstream commit cffaaf0c816238c45cd2d06913476c83eb50f682 ] Commit 57384592c433 ("iommu/vt-d: Store bus information in RMRR PCI device path") changed the type of the path data, however, the change in path type was not reflected in size calculations. Update to use the correct type and prevent a buffer overflow. This bug manifests in systems with deep PCI hierarchies, and can lead to an overflow of the static allocated buffer (dmar_pci_notify_info_buf), or can lead to overflow of slab-allocated data. BUG: KASAN: global-out-of-bounds in dmar_alloc_pci_notify_info+0x1d5/0x2e0 Write of size 1 at addr ffffffff90445d80 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.14.87-rt49-02406-gd0a0e96 #1 Call Trace: ? dump_stack+0x46/0x59 ? print_address_description+0x1df/0x290 ? dmar_alloc_pci_notify_info+0x1d5/0x2e0 ? kasan_report+0x256/0x340 ? dmar_alloc_pci_notify_info+0x1d5/0x2e0 ? e820__memblock_setup+0xb0/0xb0 ? dmar_dev_scope_init+0x424/0x48f ? __down_write_common+0x1ec/0x230 ? dmar_dev_scope_init+0x48f/0x48f ? dmar_free_unused_resources+0x109/0x109 ? cpumask_next+0x16/0x20 ? __kmem_cache_create+0x392/0x430 ? kmem_cache_create+0x135/0x2f0 ? e820__memblock_setup+0xb0/0xb0 ? intel_iommu_init+0x170/0x1848 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? migrate_enable+0x27a/0x5b0 ? sched_setattr+0x20/0x20 ? migrate_disable+0x1fc/0x380 ? task_rq_lock+0x170/0x170 ? try_to_run_init_process+0x40/0x40 ? locks_remove_file+0x85/0x2f0 ? dev_prepare_static_identity_mapping+0x78/0x78 ? rt_spin_unlock+0x39/0x50 ? lockref_put_or_lock+0x2a/0x40 ? dput+0x128/0x2f0 ? __rcu_read_unlock+0x66/0x80 ? __fput+0x250/0x300 ? __rcu_read_lock+0x1b/0x30 ? mntput_no_expire+0x38/0x290 ? e820__memblock_setup+0xb0/0xb0 ? pci_iommu_init+0x25/0x63 ? pci_iommu_init+0x25/0x63 ? do_one_initcall+0x7e/0x1c0 ? initcall_blacklisted+0x120/0x120 ? kernel_init_freeable+0x27b/0x307 ? rest_init+0xd0/0xd0 ? kernel_init+0xf/0x120 ? rest_init+0xd0/0xd0 ? ret_from_fork+0x1f/0x40 The buggy address belongs to the variable: dmar_pci_notify_info_buf+0x40/0x60 Fixes: 57384592c433 ("iommu/vt-d: Store bus information in RMRR PCI device path") Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-20iommu/vt-d: Check capability before disabling protected memoryLu Baolu
[ Upstream commit 5bb71fc790a88d063507dc5d445ab8b14e845591 ] The spec states in 10.4.16 that the Protected Memory Enable Register should be treated as read-only for implementations not supporting protected memory regions (PLMR and PHMR fields reported as Clear in the Capability register). Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: mark gross <mgross@intel.com> Suggested-by: Ashok Raj <ashok.raj@intel.com> Fixes: f8bab73515ca5 ("intel-iommu: PMEN support") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05iommu/io-pgtable-arm-v7s: Only kmemleak_ignore L2 tablesNicolas Boichat
[ Upstream commit 032ebd8548c9d05e8d2bdc7a7ec2fe29454b0ad0 ] L1 tables are allocated with __get_dma_pages, and therefore already ignored by kmemleak. Without this, the kernel would print this error message on boot, when the first L1 table is allocated: [ 2.810533] kmemleak: Trying to color unknown object at 0xffffffd652388000 as Black [ 2.818190] CPU: 5 PID: 39 Comm: kworker/5:0 Tainted: G S 4.19.16 #8 [ 2.831227] Workqueue: events deferred_probe_work_func [ 2.836353] Call trace: ... [ 2.852532] paint_ptr+0xa0/0xa8 [ 2.855750] kmemleak_ignore+0x38/0x6c [ 2.859490] __arm_v7s_alloc_table+0x168/0x1f4 [ 2.863922] arm_v7s_alloc_pgtable+0x114/0x17c [ 2.868354] alloc_io_pgtable_ops+0x3c/0x78 ... Fixes: e5fc9753b1a8314 ("iommu/io-pgtable: Add ARMv7 short descriptor support") Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-27iommu/amd: fix sg->dma_address for sg->offset bigger than PAGE_SIZEStanislaw Gruszka
commit 4e50ce03976fbc8ae995a000c4b10c737467beaa upstream. Take into account that sg->offset can be bigger than PAGE_SIZE when setting segment sg->dma_address. Otherwise sg->dma_address will point at diffrent page, what makes DMA not possible with erros like this: xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa70c0 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7040 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7080 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7100 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7000 flags=0x0020] Additinally with wrong sg->dma_address unmap_sg will free wrong pages, what what can cause crashes like this: Feb 28 19:27:45 kernel: BUG: Bad page state in process cinnamon pfn:39e8b1 Feb 28 19:27:45 kernel: Disabling lock debugging due to kernel taint Feb 28 19:27:45 kernel: flags: 0x2ffff0000000000() Feb 28 19:27:45 kernel: raw: 02ffff0000000000 0000000000000000 ffffffff00000301 0000000000000000 Feb 28 19:27:45 kernel: raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 Feb 28 19:27:45 kernel: page dumped because: nonzero _refcount Feb 28 19:27:45 kernel: Modules linked in: ccm fuse arc4 nct6775 hwmon_vid amdgpu nls_iso8859_1 nls_cp437 edac_mce_amd vfat fat kvm_amd ccp rng_core kvm mt76x0u mt76x0_common mt76x02_usb irqbypass mt76_usb mt76x02_lib mt76 crct10dif_pclmul crc32_pclmul chash mac80211 amd_iommu_v2 ghash_clmulni_intel gpu_sched i2c_algo_bit ttm wmi_bmof snd_hda_codec_realtek snd_hda_codec_generic drm_kms_helper snd_hda_codec_hdmi snd_hda_intel drm snd_hda_codec aesni_intel snd_hda_core snd_hwdep aes_x86_64 crypto_simd snd_pcm cfg80211 cryptd mousedev snd_timer glue_helper pcspkr r8169 input_leds realtek agpgart libphy rfkill snd syscopyarea sysfillrect sysimgblt fb_sys_fops soundcore sp5100_tco k10temp i2c_piix4 wmi evdev gpio_amdpt pinctrl_amd mac_hid pcc_cpufreq acpi_cpufreq sg ip_tables x_tables ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) fscrypto(E) sd_mod(E) hid_generic(E) usbhid(E) hid(E) dm_mod(E) serio_raw(E) atkbd(E) libps2(E) crc32c_intel(E) ahci(E) libahci(E) libata(E) xhci_pci(E) xhci_hcd(E) Feb 28 19:27:45 kernel: scsi_mod(E) i8042(E) serio(E) bcache(E) crc64(E) Feb 28 19:27:45 kernel: CPU: 2 PID: 896 Comm: cinnamon Tainted: G B W E 4.20.12-arch1-1-custom #1 Feb 28 19:27:45 kernel: Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B450M Pro4, BIOS P1.20 06/26/2018 Feb 28 19:27:45 kernel: Call Trace: Feb 28 19:27:45 kernel: dump_stack+0x5c/0x80 Feb 28 19:27:45 kernel: bad_page.cold.29+0x7f/0xb2 Feb 28 19:27:45 kernel: __free_pages_ok+0x2c0/0x2d0 Feb 28 19:27:45 kernel: skb_release_data+0x96/0x180 Feb 28 19:27:45 kernel: __kfree_skb+0xe/0x20 Feb 28 19:27:45 kernel: tcp_recvmsg+0x894/0xc60 Feb 28 19:27:45 kernel: ? reuse_swap_page+0x120/0x340 Feb 28 19:27:45 kernel: ? ptep_set_access_flags+0x23/0x30 Feb 28 19:27:45 kernel: inet_recvmsg+0x5b/0x100 Feb 28 19:27:45 kernel: __sys_recvfrom+0xc3/0x180 Feb 28 19:27:45 kernel: ? handle_mm_fault+0x10a/0x250 Feb 28 19:27:45 kernel: ? syscall_trace_enter+0x1d3/0x2d0 Feb 28 19:27:45 kernel: ? __audit_syscall_exit+0x22a/0x290 Feb 28 19:27:45 kernel: __x64_sys_recvfrom+0x24/0x30 Feb 28 19:27:45 kernel: do_syscall_64+0x5b/0x170 Feb 28 19:27:45 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Cc: stable@vger.kernel.org Reported-and-tested-by: Jan Viktorin <jan.viktorin@gmail.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Fixes: 80187fd39dcb ('iommu/amd: Optimize map_sg and unmap_sg') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-13iommu/amd: Fix IOMMU page flush when detach device from a domainSuravee Suthikulpanit
[ Upstream commit 9825bd94e3a2baae1f4874767ae3a7d4c049720e ] When a VM is terminated, the VFIO driver detaches all pass-through devices from VFIO domain by clearing domain id and page table root pointer from each device table entry (DTE), and then invalidates the DTE. Then, the VFIO driver unmap pages and invalidate IOMMU pages. Currently, the IOMMU driver keeps track of which IOMMU and how many devices are attached to the domain. When invalidate IOMMU pages, the driver checks if the IOMMU is still attached to the domain before issuing the invalidate page command. However, since VFIO has already detached all devices from the domain, the subsequent INVALIDATE_IOMMU_PAGES commands are being skipped as there is no IOMMU attached to the domain. This results in data corruption and could cause the PCI device to end up in indeterministic state. Fix this by invalidate IOMMU pages when detach a device, and before decrementing the per-domain device reference counts. Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by: Joerg Roedel <joro@8bytes.org> Co-developed-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Fixes: 6de8ad9b9ee0 ('x86/amd-iommu: Make iommu_flush_pages aware of multiple IOMMUs') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-13iommu/amd: Unmap all mapped pages in error path of map_sgJerry Snitselaar
[ Upstream commit f1724c0883bb0ce93b8dcb94b53dcca3b75ac9a7 ] In the error path of map_sg there is an incorrect if condition for breaking out of the loop that searches the scatterlist for mapped pages to unmap. Instead of breaking out of the loop once all the pages that were mapped have been unmapped, it will break out of the loop after it has unmapped 1 page. Fix the condition, so it breaks out of the loop only after all the mapped pages have been unmapped. Fixes: 80187fd39dcb ("iommu/amd: Optimize map_sg and unmap_sg") Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-13iommu/amd: Call free_iova_fast with pfn in map_sgJerry Snitselaar
[ Upstream commit 51d8838d66d3249508940d8f59b07701f2129723 ] In the error path of map_sg, free_iova_fast is being called with address instead of the pfn. This results in a bad value getting into the rcache, and can result in hitting a BUG_ON when iova_magazine_free_pfns is called. Cc: Joerg Roedel <joro@8bytes.org> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Fixes: 80187fd39dcb ("iommu/amd: Optimize map_sg and unmap_sg") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12iommu/arm-smmu-v3: Use explicit mb() when moving cons pointerWill Deacon
[ Upstream commit a868e8530441286342f90c1fd9c5f24de3aa2880 ] After removing an entry from a queue (e.g. reading an event in arm_smmu_evtq_thread()) it is necessary to advance the MMIO consumer pointer to free the queue slot back to the SMMU. A memory barrier is required here so that all reads targetting the queue entry have completed before the consumer pointer is updated. The implementation of queue_inc_cons() relies on a writel() to complete the previous reads, but this is incorrect because writel() is only guaranteed to complete prior writes. This patch replaces the call to writel() with an mb(); writel_relaxed() sequence, which gives us the read->write ordering which we require. Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12iommu/arm-smmu: Add support for qcom,smmu-v2 variantVivek Gautam
[ Upstream commit 89cddc563743cb1e0068867ac97013b2a5bf86aa ] qcom,smmu-v2 is an arm,smmu-v2 implementation with specific clock and power requirements. On msm8996, multiple cores, viz. mdss, video, etc. use this smmu. On sdm845, this smmu is used with gpu. Add bindings for the same. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12iommu/amd: Fix amd_iommu=force_isolationYu Zhao
[ Upstream commit c12b08ebbe16f0d3a96a116d86709b04c1ee8e74 ] The parameter is still there but it's ignored. We need to check its value before deciding to go into passthrough mode for AMD IOMMU v2 capable device. We occasionally use this parameter to force v2 capable device into translation mode to debug memory corruption that we suspect is caused by DMA writes. To address the following comment from Joerg Roedel on the first version, v2 capability of device is completely ignored. > This breaks the iommu_v2 use-case, as it needs a direct mapping for the > devices that support it. And from Documentation/admin-guide/kernel-parameters.txt: This option does not override iommu=pt Fixes: aafd8ba0ca74 ("iommu/amd: Implement add_device and remove_device") Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13iommu/vt-d: Handle domain agaw being less than iommu agawSohil Mehta
commit 3569dd07aaad71920c5ea4da2d5cc9a167c1ffd4 upstream. The Intel IOMMU driver opportunistically skips a few top level page tables from the domain paging directory while programming the IOMMU context entry. However there is an implicit assumption in the code that domain's adjusted guest address width (agaw) would always be greater than IOMMU's agaw. The IOMMU capabilities in an upcoming platform cause the domain's agaw to be lower than IOMMU's agaw. The issue is seen when the IOMMU supports both 4-level and 5-level paging. The domain builds a 4-level page table based on agaw of 2. However the IOMMU's agaw is set as 3 (5-level). In this case the code incorrectly tries to skip page page table levels. This causes the IOMMU driver to avoid programming the context entry. The fix handles this case and programs the context entry accordingly. Fixes: de24e55395698 ("iommu/vt-d: Simplify domain_context_mapping_one") Cc: <stable@vger.kernel.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reported-by: Ramos Falcon, Ernesto R <ernesto.r.ramos.falcon@intel.com> Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13iommu/vt-d: Use memunmap to free memremapPan Bian
[ Upstream commit 829383e183728dec7ed9150b949cd6de64127809 ] memunmap() should be used to free the return of memremap(), not iounmap(). Fixes: dfddb969edf0 ('iommu/vt-d: Switch from ioremap_cache to memremap') Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13iommu/ipmmu-vmsa: Fix crash on early domain freeGeert Uytterhoeven
[ Upstream commit e5b78f2e349eef5d4fca5dc1cf5a3b4b2cc27abd ] If iommu_ops.add_device() fails, iommu_ops.domain_free() is still called, leading to a crash, as the domain was only partially initialized: ipmmu-vmsa e67b0000.mmu: Cannot accommodate DMA translation for IOMMU page tables sata_rcar ee300000.sata: Unable to initialize IPMMU context iommu: Failed to add device ee300000.sata to group 0: -22 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 ... Call trace: ipmmu_domain_free+0x1c/0xa0 iommu_group_release+0x48/0x68 kobject_put+0x74/0xe8 kobject_del.part.0+0x3c/0x50 kobject_put+0x60/0xe8 iommu_group_get_for_dev+0xa8/0x1f0 ipmmu_add_device+0x1c/0x40 of_iommu_configure+0x118/0x190 Fix this by checking if the domain's context already exists, before trying to destroy it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Fixes: d25a2a16f0889 ('iommu: Add driver for Renesas VMSA-compatible IPMMU') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13iommu/vt-d: Fix NULL pointer dereference in prq_event_thread()Lu Baolu
[ Upstream commit 19ed3e2dd8549c1a34914e8dad01b64e7837645a ] When handling page request without pasid event, go to "no_pasid" branch instead of "bad_req". Otherwise, a NULL pointer deference will happen there. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Fixes: a222a7f0bb6c9 'iommu/vt-d: Implement page request handling' Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-20iommu/amd: Return devid as alias for ACPI HID devicesArindam Nath
[ Upstream commit 5ebb1bc2d63d90dd204169e21fd7a0b4bb8c776e ] ACPI HID devices do not actually have an alias for them in the IVRS. But dev_data->alias is still used for indexing into the IOMMU device table for devices being handled by the IOMMU. So for ACPI HID devices, we simply return the corresponding devid as an alias, as parsed from IVRS table. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Fixes: 2bf9a0a12749 ('iommu/amd: Add iommu support for ACPI HID devices') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-03iommu/amd: make sure TLB to be flushed before IOVA freedZhen Lei
[ Upstream commit 3c120143f584360a13614787e23ae2cdcb5e5ccd ] Although the mapping has already been removed in the page table, it maybe still exist in TLB. Suppose the freed IOVAs is reused by others before the flush operation completed, the new user can not correctly access to its meomory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Fixes: b1516a14657a ('iommu/amd: Implement flush queue') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer registerMiao Zhong
[ Upstream commit 0d535967ac658966c6ade8f82b5799092f7d5441 ] When PRI queue occurs overflow, driver should update the OVACKFLG to the PRIQ consumer register, otherwise subsequent PRI requests will not be processed. Cc: Will Deacon <will.deacon@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Miao Zhong <zhongmiao@hisilicon.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19iommu/ipmmu-vmsa: Fix allocation in atomic contextGeert Uytterhoeven
[ Upstream commit 46583e8c48c5a094ba28060615b3a7c8c576690f ] When attaching a device to an IOMMU group with CONFIG_DEBUG_ATOMIC_SLEEP=y: BUG: sleeping function called from invalid context at mm/slab.h:421 in_atomic(): 1, irqs_disabled(): 128, pid: 61, name: kworker/1:1 ... Call trace: ... arm_lpae_alloc_pgtable+0x114/0x184 arm_64_lpae_alloc_pgtable_s1+0x2c/0x128 arm_32_lpae_alloc_pgtable_s1+0x40/0x6c alloc_io_pgtable_ops+0x60/0x88 ipmmu_attach_device+0x140/0x334 ipmmu_attach_device() takes a spinlock, while arm_lpae_alloc_pgtable() allocates memory using GFP_KERNEL. Originally, the ipmmu-vmsa driver had its own custom page table allocation implementation using GFP_ATOMIC, hence the spinlock was fine. Fix this by replacing the spinlock by a mutex, like the arm-smmu driver does. Fixes: f20ed39f53145e45 ("iommu/ipmmu-vmsa: Use the ARM LPAE page table allocator") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-09iommu/vt-d: Fix dev iotlb pfsid useJacob Pan
commit 1c48db44924298ad0cb5a6386b88017539be8822 upstream. PFSID should be used in the invalidation descriptor for flushing device IOTLBs on SRIOV VFs. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: stable@vger.kernel.org Cc: "Ashok Raj" <ashok.raj@intel.com> Cc: "Lu Baolu" <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-09iommu/vt-d: Add definitions for PFSIDJacob Pan
commit 0f725561e168485eff7277d683405c05b192f537 upstream. When SRIOV VF device IOTLB is invalidated, we need to provide the PF source ID such that IOMMU hardware can gauge the depth of invalidation queue which is shared among VFs. This is needed when device invalidation throttle (DIT) capability is supported. This patch adds bit definitions for checking and tracking PFSID. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: stable@vger.kernel.org Cc: "Ashok Raj" <ashok.raj@intel.com> Cc: "Lu Baolu" <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30iommu/vt-d: Use domain instead of cache fetchingPeter Xu
[ Upstream commit 9d2e6505f6d6934e681aed502f566198cb25c74a ] after commit a1ddcbe93010 ("iommu/vt-d: Pass dmar_domain directly into iommu_flush_iotlb_psi", 2015-08-12), we have domain pointer as parameter to iommu_flush_iotlb_psi(), so no need to fetch it from cache again. More importantly, a NULL reference pointer bug is reported on RHEL7 (and it can be reproduced on some old upstream kernels too, e.g., v4.13) by unplugging an 40g nic from a VM (hard to test unplug on real host, but it should be the same): https://bugzilla.redhat.com/show_bug.cgi?id=1531367 [ 24.391863] pciehp 0000:00:03.0:pcie004: Slot(0): Attention button pressed [ 24.393442] pciehp 0000:00:03.0:pcie004: Slot(0): Powering off due to button press [ 29.721068] i40evf 0000:01:00.0: Unable to send opcode 2 to PF, err I40E_ERR_QUEUE_EMPTY, aq_err OK [ 29.783557] iommu: Removing device 0000:01:00.0 from group 3 [ 29.784662] BUG: unable to handle kernel NULL pointer dereference at 0000000000000304 [ 29.785817] IP: iommu_flush_iotlb_psi+0xcf/0x120 [ 29.786486] PGD 0 [ 29.786487] P4D 0 [ 29.786812] [ 29.787390] Oops: 0000 [#1] SMP [ 29.787876] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_ng [ 29.795371] CPU: 0 PID: 156 Comm: kworker/0:2 Not tainted 4.13.0 #14 [ 29.796366] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.11.0-1.el7 04/01/2014 [ 29.797593] Workqueue: pciehp-0 pciehp_power_thread [ 29.798328] task: ffff94f5745b4a00 task.stack: ffffb326805ac000 [ 29.799178] RIP: 0010:iommu_flush_iotlb_psi+0xcf/0x120 [ 29.799919] RSP: 0018:ffffb326805afbd0 EFLAGS: 00010086 [ 29.800666] RAX: ffff94f5bc56e800 RBX: 0000000000000000 RCX: 0000000200000025 [ 29.801667] RDX: ffff94f5bc56e000 RSI: 0000000000000082 RDI: 0000000000000000 [ 29.802755] RBP: ffffb326805afbf8 R08: 0000000000000000 R09: ffff94f5bc86bbf0 [ 29.803772] R10: ffffb326805afba8 R11: 00000000000ffdc4 R12: ffff94f5bc86a400 [ 29.804789] R13: 0000000000000000 R14: 00000000ffdc4000 R15: 0000000000000000 [ 29.805792] FS: 0000000000000000(0000) GS:ffff94f5bfc00000(0000) knlGS:0000000000000000 [ 29.806923] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.807736] CR2: 0000000000000304 CR3: 000000003499d000 CR4: 00000000000006f0 [ 29.808747] Call Trace: [ 29.809156] flush_unmaps_timeout+0x126/0x1c0 [ 29.809800] domain_exit+0xd6/0x100 [ 29.810322] device_notifier+0x6b/0x70 [ 29.810902] notifier_call_chain+0x4a/0x70 [ 29.812822] __blocking_notifier_call_chain+0x47/0x60 [ 29.814499] blocking_notifier_call_chain+0x16/0x20 [ 29.816137] device_del+0x233/0x320 [ 29.817588] pci_remove_bus_device+0x6f/0x110 [ 29.819133] pci_stop_and_remove_bus_device+0x1a/0x20 [ 29.820817] pciehp_unconfigure_device+0x7a/0x1d0 [ 29.822434] pciehp_disable_slot+0x52/0xe0 [ 29.823931] pciehp_power_thread+0x8a/0xa0 [ 29.825411] process_one_work+0x18c/0x3a0 [ 29.826875] worker_thread+0x4e/0x3b0 [ 29.828263] kthread+0x109/0x140 [ 29.829564] ? process_one_work+0x3a0/0x3a0 [ 29.831081] ? kthread_park+0x60/0x60 [ 29.832464] ret_from_fork+0x25/0x30 [ 29.833794] Code: 85 ed 74 0b 5b 41 5c 41 5d 41 5e 41 5f 5d c3 49 8b 54 24 60 44 89 f8 0f b6 c4 48 8b 04 c2 48 85 c0 74 49 45 0f b6 ff 4a 8b 3c f8 <80> bf [ 29.838514] RIP: iommu_flush_iotlb_psi+0xcf/0x120 RSP: ffffb326805afbd0 [ 29.840362] CR2: 0000000000000304 [ 29.841716] ---[ end trace b10ec0d6900868d3 ]--- This patch fixes that problem if applied to v4.13 kernel. The bug does not exist on latest upstream kernel since it's fixed as a side effect of commit 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing", 2017-08-15). But IMHO it's still good to have this patch upstream. CC: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Fixes: a1ddcbe93010 ("iommu/vt-d: Pass dmar_domain directly into iommu_flush_iotlb_psi") Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24iommu/vt-d: Fix a potential memory leakLu Baolu
commit bbe4b3af9d9e3172fb9aa1f8dcdfaedcb381fc64 upstream. A memory block was allocated in intel_svm_bind_mm() but never freed in a failure path. This patch fixes this by free it to avoid memory leakage. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Fixes: 2f26e0a9c9860 ('iommu/vt-d: Add basic SVM PASID support') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24iommu/vt-d: clean up pr_irq if request_threaded_irq failsJerry Snitselaar
[ Upstream commit 72d548113881dd32bf7f0b221d031e6586468437 ] It is unlikely request_threaded_irq will fail, but if it does for some reason we should clear iommu->pr_irq in the error path. Also intel_svm_finish_prq shouldn't try to clean up the page request interrupt if pr_irq is 0. Without these, if request_threaded_irq were to fail the following occurs: fail with no fixes: [ 0.683147] ------------[ cut here ]------------ [ 0.683148] NULL pointer, cannot free irq [ 0.683158] WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:1632 irq_domain_free_irqs+0x126/0x140 [ 0.683160] Modules linked in: [ 0.683163] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #3 [ 0.683165] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.683168] RIP: 0010:irq_domain_free_irqs+0x126/0x140 [ 0.683169] RSP: 0000:ffffc90000037ce8 EFLAGS: 00010292 [ 0.683171] RAX: 000000000000001d RBX: ffff880276283c00 RCX: ffffffff81c5e5e8 [ 0.683172] RDX: 0000000000000001 RSI: 0000000000000096 RDI: 0000000000000246 [ 0.683174] RBP: ffff880276283c00 R08: 0000000000000000 R09: 000000000000023c [ 0.683175] R10: 0000000000000007 R11: 0000000000000000 R12: 000000000000007a [ 0.683176] R13: 0000000000000001 R14: 0000000000000000 R15: 0000010010000000 [ 0.683178] FS: 0000000000000000(0000) GS:ffff88027ec80000(0000) knlGS:0000000000000000 [ 0.683180] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.683181] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.683182] Call Trace: [ 0.683189] intel_svm_finish_prq+0x3c/0x60 [ 0.683191] free_dmar_iommu+0x1ac/0x1b0 [ 0.683195] init_dmars+0xaaa/0xaea [ 0.683200] ? klist_next+0x19/0xc0 [ 0.683203] ? pci_do_find_bus+0x50/0x50 [ 0.683205] ? pci_get_dev_by_id+0x52/0x70 [ 0.683208] intel_iommu_init+0x498/0x5c7 [ 0.683211] pci_iommu_init+0x13/0x3c [ 0.683214] ? e820__memblock_setup+0x61/0x61 [ 0.683217] do_one_initcall+0x4d/0x1a0 [ 0.683220] kernel_init_freeable+0x186/0x20e [ 0.683222] ? set_debug_rodata+0x11/0x11 [ 0.683225] ? rest_init+0xb0/0xb0 [ 0.683226] kernel_init+0xa/0xff [ 0.683229] ret_from_fork+0x1f/0x30 [ 0.683259] Code: 89 ee 44 89 e7 e8 3b e8 ff ff 5b 5d 44 89 e7 44 89 ee 41 5c 41 5d 41 5e e9 a8 84 ff ff 48 c7 c7 a8 71 a7 81 31 c0 e8 6a d3 f9 ff <0f> ff 5b 5d 41 5c 41 5d 41 5 e c3 0f 1f 44 00 00 66 2e 0f 1f 84 [ 0.683285] ---[ end trace f7650e42792627ca ]--- with iommu->pr_irq = 0, but no check in intel_svm_finish_prq: [ 0.669561] ------------[ cut here ]------------ [ 0.669563] Trying to free already-free IRQ 0 [ 0.669573] WARNING: CPU: 3 PID: 1 at kernel/irq/manage.c:1546 __free_irq+0xa4/0x2c0 [ 0.669574] Modules linked in: [ 0.669577] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #4 [ 0.669579] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.669581] RIP: 0010:__free_irq+0xa4/0x2c0 [ 0.669582] RSP: 0000:ffffc90000037cc0 EFLAGS: 00010082 [ 0.669584] RAX: 0000000000000021 RBX: 0000000000000000 RCX: ffffffff81c5e5e8 [ 0.669585] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000046 [ 0.669587] RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000023c [ 0.669588] R10: 0000000000000007 R11: 0000000000000000 R12: ffff880276253960 [ 0.669589] R13: ffff8802762538a4 R14: ffff880276253800 R15: ffff880276283600 [ 0.669593] FS: 0000000000000000(0000) GS:ffff88027ed80000(0000) knlGS:0000000000000000 [ 0.669594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.669596] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.669602] Call Trace: [ 0.669616] free_irq+0x30/0x60 [ 0.669620] intel_svm_finish_prq+0x34/0x60 [ 0.669623] free_dmar_iommu+0x1ac/0x1b0 [ 0.669627] init_dmars+0xaaa/0xaea [ 0.669631] ? klist_next+0x19/0xc0 [ 0.669634] ? pci_do_find_bus+0x50/0x50 [ 0.669637] ? pci_get_dev_by_id+0x52/0x70 [ 0.669639] intel_iommu_init+0x498/0x5c7 [ 0.669642] pci_iommu_init+0x13/0x3c [ 0.669645] ? e820__memblock_setup+0x61/0x61 [ 0.669648] do_one_initcall+0x4d/0x1a0 [ 0.669651] kernel_init_freeable+0x186/0x20e [ 0.669653] ? set_debug_rodata+0x11/0x11 [ 0.669656] ? rest_init+0xb0/0xb0 [ 0.669658] kernel_init+0xa/0xff [ 0.669661] ret_from_fork+0x1f/0x30 [ 0.669662] Code: 7a 08 75 0e e9 c3 01 00 00 4c 39 7b 08 74 57 48 89 da 48 8b 5a 18 48 85 db 75 ee 89 ee 48 c7 c7 78 67 a7 81 31 c0 e8 4c 37 fa ff <0f> ff 48 8b 34 24 4c 89 ef e 8 0e 4c 68 00 49 8b 46 40 48 8b 80 [ 0.669688] ---[ end trace 58a470248700f2fc ]--- Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24iommu/omap: Register driver before setting IOMMU opsSuman Anna
[ Upstream commit abaa7e5b054aae567861628b74dbc7fbf8ed79e8 ] Move the registration of the OMAP IOMMU platform driver before setting the IOMMU callbacks on the platform bus. This causes the IOMMU devices to be probed first before the .add_device() callback is invoked for all registered devices, and allows the iommu_group support to be added to the OMAP IOMMU driver. While at this, also check for the return status from bus_set_iommu. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22iommu/iova: Fix underflow bug in __alloc_and_insert_iova_rangeNate Watterson
[ Upstream commit 5016bdb796b3726eec043ca0ce3be981f712c756 ] Normally, calling alloc_iova() using an iova_domain with insufficient pfns remaining between start_pfn and dma_limit will fail and return a NULL pointer. Unexpectedly, if such a "full" iova_domain contains an iova with pfn_lo == 0, the alloc_iova() call will instead succeed and return an iova containing invalid pfns. This is caused by an underflow bug in __alloc_and_insert_iova_range() that occurs after walking the "full" iova tree when the search ends at the iova with pfn_lo == 0 and limit_pfn is then adjusted to be just below that (-1). This (now huge) limit_pfn gives the impression that a vast amount of space is available between it and start_pfn and thus a new iova is allocated with the invalid pfn_hi value, 0xFFF.... . To rememdy this, a check is introduced to ensure that adjustments to limit_pfn will not underflow. This issue has been observed in the wild, and is easily reproduced with the following sample code. struct iova_domain *iovad = kzalloc(sizeof(*iovad), GFP_KERNEL); struct iova *rsvd_iova, *good_iova, *bad_iova; unsigned long limit_pfn = 3; unsigned long start_pfn = 1; unsigned long va_size = 2; init_iova_domain(iovad, SZ_4K, start_pfn, limit_pfn); rsvd_iova = reserve_iova(iovad, 0, 0); good_iova = alloc_iova(iovad, va_size, limit_pfn, true); bad_iova = alloc_iova(iovad, va_size, limit_pfn, true); Prior to the patch, this yielded: *rsvd_iova == {0, 0} /* Expected */ *good_iova == {2, 3} /* Expected */ *bad_iova == {-2, -1} /* Oh no... */ After the patch, bad_iova is NULL as expected since inadequate space remains between limit_pfn and start_pfn after allocating good_iova. Signed-off-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-10iommu/arm-smmu-v3: Cope with duplicated Stream IDsRobin Murphy
commit 563b5cbe334e9503ab2b234e279d500fc4f76018 upstream. For PCI devices behind an aliasing PCIe-to-PCI/X bridge, the bridge alias to DevFn 0.0 on the subordinate bus may match the original RID of the device, resulting in the same SID being present in the device's fwspec twice. This causes trouble later in arm_smmu_write_strtab_ent() when we wind up visiting the STE a second time and find it already live. Avoid the issue by giving arm_smmu_install_ste_for_dev() the cleverness to skip over duplicates. It seems mildly counterintuitive compared to preventing the duplicates from existing in the first place, but since the DT and ACPI probe paths build their fwspecs differently, this is actually the cleanest and most self-contained way to deal with it. Fixes: 8f78515425da ("iommu/arm-smmu: Implement of_xlate() for SMMUv3") Reported-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com> Tested-by: Jayachandran C. <jnair@caviumnetworks.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-10iommu/arm-smmu-v3: Don't free page table ops twiceJean-Philippe Brucker
commit 57d72e159b60456c8bb281736c02ddd3164037aa upstream. Kasan reports a double free when finalise_stage_fn fails: the io_pgtable ops are freed by arm_smmu_domain_finalise and then again by arm_smmu_domain_free. Prevent this by leaving pgtbl_ops empty on failure. Fixes: 48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-25iommu/exynos: Workaround FLPD cache flush issues for SYSMMU v5Marek Szyprowski
[ Upstream commit cd37a296a9f890586665bb8974a8b17ee2f17d6d ] For some unknown reasons, in some cases, FLPD cache invalidation doesn't work properly with SYSMMU v5 controllers found in Exynos5433 SoCs. This can be observed by a firmware crash during initialization phase of MFC video decoder available in the mentioned SoCs when IOMMU support is enabled. To workaround this issue perform a full TLB/FLPD invalidation in case of replacing any first level page descriptors in case of SYSMMU v5. Fixes: 740a01eee9ada ("iommu/exynos: Add support for v5 SYSMMU") CC: stable@vger.kernel.org # v4.10+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20iommu/amd: Limit the IOVA page range to the specified addressesGary R Hook
[ Upstream commit b92b4fb5c14257c0e7eae291ecc1f7b1962e1699 ] The extent of pages specified when applying a reserved region should include up to the last page of the range, but not the page following the range. Signed-off-by: Gary R Hook <gary.hook@amd.com> Fixes: 8d54d6c8b8f3 ('iommu/amd: Implement apply_dm_region call-back') Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-12 22:37:41 +0000