summaryrefslogtreecommitdiff
path: root/drivers/leds
AgeCommit message (Collapse)Author
2015-11-05Merge tag 'spi-v4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-11-04Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
2015-11-03leds: 88pm860x: add missing of_node_putJulia Lawall
for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression n; expression e,r; @@ for_each_child_of_node(r,n) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: bcm6328: add missing of_node_putJulia Lawall
for_each_available_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: bcm6358: add missing of_node_putJulia Lawall
for_each_available_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03powerpc/powernv: add missing of_node_putJulia Lawall
for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: leds-wrap.c: Use devm_led_classdev_registerFida Mohammad
Use of resource managed function devm_led_classdev_register to make initialization path simpler. Also removed redundant remove function. Signed-off-by: Fida Mohammad <fmthoker@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: leds-net48xx: Use devm_led_classdev_registerMuhammad Falak R Wani
Use devm_led_classdev_register instead of led_classdev_register, removing the redundant net48xx_led_remove function. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: leds-menf21bmc.c: Use devm_led_class_registerMuhammad Falak R Wani
Use resource-managed function devm_led_classdev_register instead of led_classdev_register, consequently remove redundant menf21bmc_led_remove function. Also drop the unneeded label err_free_leds. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: leds-locomo.c: Use devm_led_classdev_registerFida Mohammad
Use resource managed function devm_led_classdev_register to make initialisation path simpler. Also removed redundant led_classdev_unregister function. Signed-off-by: Fida Mohammad <fmthoker@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: leds-gpio: add shutdown functionHeiko Schocher
add a shutdown function for setting the gpio-leds into off state when shuting down. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds-bcm6328: add more init configuration optionsÁlvaro Fernández Rojas
This patch adds more init register configuration options: - Serial LEDs multiplexing. - Serial LEDs clock signal low/high polarity. - Serial LEDs data signal low/high polarity. - Serial LEDs shift direction inverted/normal. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds-bcm6328: simplify and improve default-state handlingÁlvaro Fernández Rojas
This patch simplifies and improves the code related to default-state handling. It also changes the code to power off the LEDs by default. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds-bcm6328: print invalid LEDÁlvaro Fernández Rojas
Print invalid LED instead of warning only about maximum LED value. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: netxbig: set led_classdev max_brightnessSimon Guinot
This patch sets the led_classdev max_brightness to the maximum level value supported by hardware. This allows to get rid of the brightness conversion operation (from software [0:LED_FULL] to hardware ranges) in brightness_set(). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: netxbig: convert to use the devm_ functionsSimon Guinot
This patch converts the leds-netxbig driver to use the devres functions devm_gpio_request_one() and devm_led_classdev_register(). This allows to simplify the code a bit. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: netxbig: add device tree bindingSimon Guinot
This patch adds device tree support for the netxbig LEDs. This also introduces a additionnal DT binding for the GPIO extension bus (netxbig-gpio-ext) used to configure the LEDs. Since this bus could also be used to control other devices, then it seems more suitable to have it in a separate DT binding. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: triggers: add invert to heartbeatJiri Prchal
This patch adds possibility to invert heartbeat blinking. The inverted LED is more time ON then OFF. It's because it looks better when the heartbeat LED is next to other LED which is most time ON. The invert value is exported same way via sysfs in file invert like oneshot. I get inspiration from this trigger. Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: core: Move LED core callbacks out of led-class.cJacek Anaszewski
Since the API for controlling LED brightness and blinking is defined in the LED core, move the related timer and work callbacks to the led-core.c, and initialize them through a new led_core_init API. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Pavel Machek <pavel@ucw.cz>
2015-11-03LED/MIPS: Move SEAD3 LED driver to where it belongs.Ralf Baechle
Fixes the following randconfig problem leds-sead3.c:(.text+0x7dc): undefined reference to `led_classdev_unregister' leds-sead3.c:(.text+0x7e8): undefined reference to `led_classdev_unregister' Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-leds@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: leds-ipaq-micro: Fix coding style issuesMuhammad Falak R Wani
Spaces at the starting of a line are removed, indentation using tab, instead of space. Also, line width of more than 80 characters is also taken care of. Two warnings are left alone to aid better readability. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: leds-ipaq-micro: Use devm_led_classdev_registerMuhammad Falak R Wani
Use of resource-managed function devm_led_classdev_register instead of led_classdev_register is preferred, consequently remove redundant function micro_leds_remove. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: leds-ot200: Use devm_led_classdev_registerMuhammad Falak R Wani
Use resource-managed function devm_led_classdev_register instead of led_classdev_register to make the error path simpler. The goto is replaced with direct return, unneeded label err is dropped. Also, remove redundant ot200_led_remove. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: leds-hp6xx: Use devm_led_classdev_registerMuhammad Falak R Wani
Use resource-managed function devm_led_classdev_register instead of led_classdev_register to simplify error path. An unnecessary check of ret is replaced with a direct return Also, remove redundant hp6xxled_remove. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-11-03leds: leds-cobalt-qube: Use devm_led_classdev_registerVaishali Thakkar
Use resource-managed function devm_led_classdev_register instead of led_classdev_register to make the error-path simpler. To be compatible with the change, goto is replaced with direct return, unneeded label err_null is dropped and unnecessary variable retval is removed. Also, remove redundant cobalt_qube_led_remove. Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17leds:lp55xx: Correct Kconfig dependency for f/w user helperTakashi Iwai
The commit [b67893206fc0: leds:lp55xx: fix firmware loading error] tries to address the firmware file handling with user helper, but it sets a wrong Kconfig CONFIG_FW_LOADER_USER_HELPER_FALLBACK. Since the wrong option was enabled, the system got a regression -- it suffers from the unexpected long delays for non-present firmware files. This patch corrects the Kconfig dependency to the right one, CONFIG_FW_LOADER_USER_HELPER. This doesn't change the fallback behavior but only enables UMH when needed. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=944661 Fixes: b67893206fc0 ('leds:lp55xx: fix firmware loading error') Cc: <stable@vger.kernel.org> # v4.2+ Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17leds: leds-ipaq-micro: Add LEDS_CLASS dependencyJacek Anaszewski
Fix missing Kconfig LEDS_CLASS dependency. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-17leds: aat1290: add 'static' modifier to init_mm_current_scaleJacek Anaszewski
Function init_mm_current_scale is used only locally. Make it static then. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17leds: leds-ns2: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17leds: max77693: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17leds: ktd2692: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17leds: bcm6358: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17leds: bcm6328: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17leds: aat1290: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-04Merge tag 'backlight-for-linus-4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: - Stop using LP855X Platform Data to control regulators - Move PWM8941 WLED driver into Backlight - Remove invalid use of IS_ERR_VALUE() macro - Remove duplicate check for NULL data before unregistering - Export I2C Device ID structure * tag 'backlight-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: tosa: Export I2C module alias information backlight: lp8788_bl: Delete a check before backlight_device_unregister() backlight: sky81452: Remove unneeded use of IS_ERR_VALUE() macro backlight: pm8941-wled: Move PM8941 WLED driver to backlight backlight: lp855x: Use private data for regulator control
2015-09-03Merge tag 'powerpc-4.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask from Benjamin Herrenschmidt - EEH fixes for SRIOV from Gavin - introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth - use hardware RNG for arch_get_random_seed_* not arch_get_random_* from Paul Mackerras - seccomp filter support from Michael Ellerman - opal_cec_reboot2() handling for HMIs & machine checks from Mahesh Salgaonkar - add powerpc timebase as a trace clock source from Naveen N. Rao - misc cleanups in the xmon, signal & SLB code from Anshuman Khandual - add an inline function to update POWER8 HID0 from Gautham R. Shenoy - fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman - drop support for 64K local store on 4K kernels from Michael Ellerman - move dma_get_required_mask() from pnv_phb to pci_controller_ops from Andrew Donnellan - initialize distance lookup table from drconf path from Nikunj A Dadhania - enable RTC class support from Vaibhav Jain - disable automatically blocked PCI config from Gavin Shan - add LEDs driver for PowerNV platform from Vasant Hegde - fix endianness issues in the HVSI driver from Laurent Dufour - kexec endian fixes from Samuel Mendoza-Jonas - fix corrupted pdn list from Gavin Shan - fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan - Freescale updates from Scott: Highlights include 32-bit memcpy/memset optimizations, checksum optimizations, 85xx config fragments and updates, device tree updates, e6500 fixes for non-SMP, and misc cleanup and minor fixes. - a ton of cxl updates & fixes: - add explicit precision specifiers from Rasmus Villemoes - use more common format specifier from Rasmus Villemoes - destroy cxl_adapter_idr on module_exit from Johannes Thumshirn - destroy afu->contexts_idr on release of an afu from Johannes Thumshirn - compile with -Werror from Daniel Axtens - EEH support from Daniel Axtens - plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain - add alternate MMIO error handling from Ian Munsie - allow release of contexts which have been OPENED but not STARTED from Andrew Donnellan - remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar - release irqs if memory allocation fails from Vaibhav Jain - remove racy attempt to force EEH invocation in reset from Daniel Axtens - fix + cleanup error paths in cxl_dev_context_init from Ian Munsie - fix force unmapping mmaps of contexts allocated through the kernel api from Ian Munsie - set up and enable PSL Timebase from Philippe Bergheaud * tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (140 commits) cxl: Set up and enable PSL Timebase cxl: Fix force unmapping mmaps of contexts allocated through the kernel api cxl: Fix + cleanup error paths in cxl_dev_context_init powerpc/eeh: Fix fenced PHB caused by eeh_slot_error_detail() powerpc/pseries: Cleanup on pci_dn_reconfig_notifier() powerpc/pseries: Fix corrupted pdn list powerpc/powernv: Enable LEDS support powerpc/iommu: Set default DMA offset in dma_dev_setup cxl: Remove racy attempt to force EEH invocation in reset cxl: Release irqs if memory allocation fails cxl: Remove use of macro DEFINE_PCI_DEVICE_TABLE powerpc/powernv: Fix mis-merge of OPAL support for LEDS driver powerpc/powernv: Reset HILE before kexec_sequence() powerpc/kexec: Reset secondary cpu endianness before kexec powerpc/hvsi: Fix endianness issues in the HVSI driver leds/powernv: Add driver for PowerNV platform powerpc/powernv: Create LED platform device powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states powerpc/powernv: Fix the log message when disabling VF cxl: Allow release of contexts which have been OPENED but not STARTED ...
2015-08-31Merge tag 'leds_for_4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "In this merge window we'd like to announce a change on the list of LED subsystem maintainers - Bryan Wu decided to step back and handed over the maintainership to me (Jacek Anaszewski), which entailed an update of LED subsystem git tree URL. Besides the changes in MAINTAINERS we have: - optimizations and improvements to existing LED class drivers - improvements to the common LEDs DT documentation - modifications of kirkwood-* dts files, to be in sync with patches for leds-ns2 driver, that move LEDs mode mapping outside of the driver" * tag 'leds_for_4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: Export OF module alias information in missing drivers leds:lp55xx: use the private data instead of updating I2C device platform data leds: syscon: Correct check for syscon_node_to_regmap() errors leds: leds-fsg: Use devm_led_classdev_register MAINTAINERS: Change LED subsystem git tree URL leds/led-class: Add missing put_device() ARM: Kirkwood: add modes-map property to ns2-leds nodes leds: tlc591xx: Remove redundant I2C_FUNC_SMBUS_BYTE_DATA functionality check leds: leds-ns2: depends on MACH_ARMADA_370 leds: leds-ns2: handle can_sleep GPIOs leds: leds-ns2: move LED modes mapping outside of the driver leds: lp8860: Constify reg_default tables leds: Drop owner assignment from i2c_driver leds: Allow compile test of LEDS_AAT1290 and LEDS_KTD2692 if !GPIOLIB leds: Allow compile test of GPIO consumers if !GPIOLIB DT: leds: Improve description of flash LEDs related properties
2015-08-28leds: Export OF module alias information in missing driversJavier Martinez Canillas
The I2C core always reports the MODALIAS uevent as "i2c:<modalias>" regardless of the mechanism that was used to register the device (i.e: OF or board code) and the table that is used later to match the driver with the device (i.e: I2C id table or OF match table). So drivers needs to export the I2C id table and this be built into the module or udev won't have the necessary information to autoload the needed driver module when the device is added. But this means that OF-only drivers needs to have both OF and I2C id tables that have to be kept in sync and also the dev node compatible manufacturer prefix is stripped when reporting the MODALIAS. Which can lead to issues if two vendors use the same I2C device name for example. To avoid the above, the I2C core behavior may be changed in the future to not require an SPI device table for OF-only drivers and report the OF module alias. So, it's better to also export the OF table even when is unused now to prevent breaking module loading when the core changes. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-08-28leds:lp55xx: use the private data instead of updating I2C device platform dataMilo Kim
Currently, lp55xx_of_populate_pdata() allocates lp55xx_platform_data if it's null. And it parses the DT and copies values into the 'client->dev.platform_data'. This may have architectural issue. Platform data is configurable through the DT or I2C board info inside the platform area. However, lp55xx common driver changes this configuration when it is loaded. So 'client->dev.platform_data' is not null anymore. Eventually, the driver initialization is not identical when it's unloaded and loaded again. The lp55xx common driver should use the private data, 'lp55xx_chip->pdata' instead of changing the original platform data. So, lp55xx_of_populate_pdata() is modified as follows. * Do not update 'dev->platform_data'. Return the pointer of new allocated lp55xx_platform_data. Then the driver points it to private data, 'lp55xx_chip->pdata'. * Each lp55xx driver checks the pointer and handles an error case. Then, original platform data configuration will be kept regardless of loading or unloading the driver. The driver allocates the memory and copies them from the DT if it's NULL. After the driver is loaded again, 'client->dev.platform_data' is same as initial load, so the driver is initialized identically. Cc: Toshi Kikuchi <toshik@chromium.org> Cc: linux-leds@vger.kernel.org Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-08-28leds: syscon: Correct check for syscon_node_to_regmap() errorsBjorn Andersson
syscon_node_to_regmap() returns a regmap or an ERR_PTR(). Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-08-28leds: leds-fsg: Use devm_led_classdev_registerVaishali Thakkar
Use resource-managed function devm_led_classdev_register instead of led_classdev_register to make the error-path simpler. To be compatible with the change, various gotos are replaced with direct returns and unneeded labels are dropped. Also, remove fsg_led_remove as it is now redundant. Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-08-28leds/led-class: Add missing put_device()Ricardo Ribalda Delgado
Devices found by class_find_device must be freed with put_device(). Otherwise the reference count will not work properly. Fixes: a96aa64cb572 ("leds/led-class: Handle LEDs with the same name") Reported-by: Alan Tull <delicious.quinoa@gmail.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-08-28leds: tlc591xx: Remove redundant I2C_FUNC_SMBUS_BYTE_DATA functionality checkAxel Lin
This checking is done by regmap_get_i2c_bus() which is called in devm_regmap_init_i2c(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-08-28leds: leds-ns2: depends on MACH_ARMADA_370Simon Guinot
The leds-ns2 driver is also used by the n090401 board (Seagate NAS 4-Bay), which is based on the Marvell Armada-370 SoC. Then this patch allows to select the leds-ns2 driver if MACH_ARMADA_370 is enabled. Additionally, this also updates the Kconfig help message. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-08-28leds: leds-ns2: handle can_sleep GPIOsSimon Guinot
On the board n090401 (Seagate NAS 4-Bay), some of the LEDs are handled by the leds-ns2 driver. This LEDs are connected to an I2C GPIO expander (PCA95554PW) which means that GPIO access may sleep. This patch makes leds-ns2 compatible with such GPIOs by using the *_cansleep() variant of the GPIO functions. As a drawback this functions can't be used safely in a timer context (with the timer LED trigger for example). To fix this issue, a workqueue mechanism (copied from the leds-gpio driver) is used. Note that this patch also updates slightly the ns2_led_sata_store function. The LED state is now retrieved from cached values instead of reading the GPIOs previously. This prevents ns2_led_sata_store from working with a stale LED state (which may happen when a delayed work is pending). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-08-28leds: leds-ns2: move LED modes mapping outside of the driverVincent Donnefort
On the board n090401 (Seagate NAS 4-Bay), the LED mode mapping (GPIO values to LED mode) is different from the one used on other boards supported by the leds-ns2 driver. With this patch the hardcoded mapping is removed from leds-ns2. Now, it must be defined either in the platform data (if an old-fashion board setup file is used) or in the DT node. In order to allow the later, this patch also introduces a modes-map property for the leds-ns2 DT binding. Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-08-28leds: lp8860: Constify reg_default tablesAxel Lin
These reg_default tables are not modified after initialized, so make them const. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-08-28leds: Drop owner assignment from i2c_driverKrzysztof Kozlowski
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-08-28leds: Allow compile test of LEDS_AAT1290 and LEDS_KTD2692 if !GPIOLIBGeert Uytterhoeven
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. If COMPILE_TEST is enabled, relax the dependency on GPIOLIB for the recently introduced symbols LEDS_AAT1290 and LEDS_KTD2692. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>