summaryrefslogtreecommitdiff
path: root/drivers/media/video/saa7134/saa7134-input.c
AgeCommit message (Collapse)Author
2011-02-14Digi Release Code from del-5.6/main2.6.31-digi-201102141643Ian Wisbon
2009-06-16V4L/DVB (11848): saa7134: Simplify handling of IR on AVerMedia Cardbus E506RJean Delvare
Now that we instantiate I2C IR devices explicitly, we can skip probing altogether on boards where the I2C IR device address is known. The AVerMedia Cardbus E506R is one of these boards. Tested-by: Oldrich Jedlicka <oldium.pro@seznam.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11847): saa7134: Simplify handling of IR on MSI TV@nywhere PlusJean Delvare
Now that we instantiate I2C IR devices explicitly, we can skip probing altogether on boards where the I2C IR device address is known. The MSI TV@nywhere Plus is one of these boards. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11845): ir-kbd-i2c: Use initialization dataJean Delvare
For specific boards, pass initialization data to ir-kbd-i2c instead of modifying the settings after the device is initialized. This is more efficient and easier to read. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11844): ir-kbd-i2c: Switch to the new-style device binding modelJean Delvare
Let card drivers probe for IR receiver devices and instantiate them if found. Ultimately it would be better if we could stop probing completely, but I suspect this won't be possible for all card types. There's certainly room for cleanups. For example, some drivers are sharing I2C adapter IDs, so they also had to share the list of I2C addresses being probed for an IR receiver. Now that each driver explicitly says which addresses should be probed, maybe some addresses can be dropped from some drivers. Also, the special cases in saa7134-i2c should probably be handled on a per-board basis. This would be more efficient and less risky than always probing extra addresses on all boards. I'll give it a try later. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11843): ir-kbd-i2c: Don't use i2c_client.name for our own needsJean Delvare
In the standard device driver binding model, the name field of struct i2c_client is used to match devices to their drivers, so we must stop using it for internal purposes. Define a separate field in struct IR_i2c as a replacement, and use it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11604): saa7134: split Behold`s card entries to properly identify ↵Dmitri Belimov
the model Split Beholdr`s cards to correct models. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11442): saa7134: BZ#7524: Add AVerTV Studio 507UA supportAndy Shevchenko
[mchehab@redhat.com: Fix merge conflicts and CodingStyle issues] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10156): saa7134: Add support for Avermedia AVer TV GO 007 FM PlusPham Thanh Nam
This patch adds support for Avermedia AVer TV GO 007 FM Plus (M15C) on saa7134 driver (PCI ID 1461:f31d). Signed-off-by: Pham Thanh Nam <phamthanhnam.ptn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9772): saa7134: Add support for Kworld Plus TV Analog Lite PCIMauro Carvalho Chehab
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9168): Add support for MSI TV@nywhere Plus remoteBrian Rogers
The IR controller has a couple quirks. It won't respond until some other device on the bus is probed. To work around that, probe 0x50 first. Then, since it won't respond to a zero-byte read, probe with a one-byte read. Signed-off-by: Brian Rogers <brian_rogers@comcast.net> [mchehab.redhat.com: Fix merge conflicts and remove an unused var] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9061): saa7134: Add support for Real Audio 220Mauro Carvalho Chehab
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9060): saa7134: Add support for Avermedia PCI pure analog (M135A)Mauro Carvalho Chehab
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9059): saa7134: Add support for Encore version 5.3 boardMauro Carvalho Chehab
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8625): saa7134: Add NEC prococol IR decoding capabilityMauro Carvalho Chehab
This patch adds the capability of decoding NEC protocol, received via GPIO18 line. This GPIO port can trigger saa7134 IRQ. A future improvement would be to make it a little more generic to work also with GPIO16 line. A pure IRQ code didn't work, since some delays were introduced on the tests we did. A possible approach would be to use polling at a rate of 2.5 ms or less. If a new code were taken, a code similar to nec_task() could be used. However, this would add an extra overhead to kernel, and will consume more power. Due to that, we took an hybrid approach: an IRQ upper half to trigger when a new key is received and a bottom half to convert pulse-distance into a keycode. The bottom half is polling based, to improve performance. During the bottom half proccess, GPIO18 IRQ line is disabled, preventing IRQ reentrancy and improving performance a little bit. Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-07-20V4L/DVB (8395): saa7134: Fix Kbuild dependency of ir-kbd-i2cMauro Carvalho Chehab
Currently, saa7134 is dependent of ir-kbd-i2c, since it uses a symbol that is defined there. However, as this symbol is used only on saa7134, there's no sense on keeping it defined there (or on ir-commons). So, let's move it to saa7134 and remove one symbol for being exported. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8319): saa7134: Add support for analog only ASUSTeK P7131Hermann Pitton
saa7134: add a separate entry for the ASUSTeK P7131 analog only and do some eeprom detection to escape from the TVFM7135 with the same PCI subsystem on auto detection. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8021): Beholder's cards descriptionDmitry Belimov
Split the Beholder M6 family to different models. Because M6 hasn`t RDS, M63 has chip with AC3 codec, M6 Extra has other type of HF module. Add correct data for support MPEG encoder. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26V4L/DVB (8048): saa7134: Fix entries for Avermedia A16d and Avermedia E506Tim Farrington
Also, adds IR table for Avermedia A16d Signed-off-by: Tim Farrington <timf@iinet.net.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7765): Add support for Beholder BeholdTV H6Igor Kuznetsov
Signed-off-by: Igor Kuznetsov <igk@igk.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7677): saa7134: Add/fix Beholder entriesDmitry Belimov
Beholder TV/FM tuners: Changes: Add support Beholder Columbus PCMCIA card. Add key map for remote control of Beholder Columbus PCMCIA card. Fix gpiomask for all Beholder tuners. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7094): static memoryDouglas Schilling Landgraf
- Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7192): Adds support for Genius TVGo A11MCEAdrian Pardini
Signed-off-by: Adrian Pardini <pardo.bsso@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6974): Fix codingStyleMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6973): Add Beholder TV 401/405/407/409/505/507/609/M6 supportAndrey J. Melnikoff (TEMHOTA)
This patch updates cardlist for Beholder TV tuners: old models (with GPIO ir) 401, 403, 405, 407, 409, 505, 507 and add support for 607, 609, M6 cards with new i2c-ir. Signed-off-by: Igor Kuznetsov <igk72@yandex.ru> Signed-off-by: Andrey J. Melnikov <temnota@kmv.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6752): saa7134: Enable remote control support for Avermedia M102Albert Graham
This patch enabled the IR remote control for the Avermedia M102 (card=110), which appears to be the same IR as the already supported device on the Avermedia AVerTV GO 007 FM (card=57) model, the code is two one liners which enable the IR for this device (subsystem: 1461:f31e) Signed-off-by: Albert Graham <agraham@g-b.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6617): drivers/media/video: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6379): patch which improves GotView Saa7135 remote controlPedro
improve GoTView PCI7135 remote control working under linux. Acked-by: Hermann Pitton <hermann-pitton@arcor.de> Acked-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Eugene M. Roginskii <roginovicci@nm.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6329): Additional Fixes for saa7134 suspend/resumeMaxim Levitsky
Fixes few more problems I found in my saa7134 resume code: * Race between IRQ handler and .suspend()/.resume() functions * Removes timeout timers on active buffers - those buffers will be recaptured after resume * Adds suspend/resume for IR code - probably necessary if using polling mode * Adds #ifdef CONFIG_PM overs suspend code * Runs a quirk in set_tvnorm in suspend/resume too * Rearranges the order of calls in saa7134_resume to be exactly as in saa7134_initdev thus the card is initialized in exactly the same way * Since DMA audio capture suspend/resume isn't yet supported, avoid re-enabling it on resume for now Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6079): Cleanup: remove linux/moduleparam.h from drivers/media filesMauro Carvalho Chehab
Since at least kernel 2.6.12-rc2, module.h includes moduleparm.h. This patch removes all occurences of moduleparm.h from drivers/media files. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5821): Saa7134: add remote control support for LifeView FlyDVB-S LR300James Le Cuirot
It has been confirmed that the FlyDVB IR codes currently in the kernel work with the LifeView FlyDVB-S LR300. This one line addition adds it to the list of supported cards. Signed-off-by: James Le Cuirot <chewi@aura-online.co.uk> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5698): Input: drivers/media - switch to using input_dev->dev.parentDmitry Torokhov
In preparation for struct class_device -> struct device input core conversion switch to using input_dev->dev.parent when specifying device position in sysfs tree. Signed-off-by: Dmitry Torokhov <dtor at mail.ru> Acked-by: Thierry Merle <thierry.merle@free.fr> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5682): SAA7134 - switch to use msecs_to_jiffies()Dmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5647): Saa7134: enable ir-remote for 10moons TM300Tony Wan
Using Encore's key codes, we needn't add any additional key table. Signed-off-by: Tony Wan <wankai@sjtu.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5486): Add support for remote of Asustech P7131 Hybrid LNAEd Vipas
This patch just defines the remote control type. Signed-off-by: Ed Vipas <epvipas@gmail.com> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5017): DVB: fix compile errorAdrian Bunk
This patch fixes the following compile error: <-- snip --> ... LD drivers/media/video/built-in.o drivers/media/video/saa7134/built-in.o:(.data+0x85ec): multiple definition of `ir_rc5_remote_gap' drivers/media/video/bt8xx/built-in.o:(.data+0x734c): first defined here drivers/media/video/saa7134/built-in.o:(.data+0x85f0): multiple definition of `ir_rc5_key_timeout' drivers/media/video/bt8xx/built-in.o:(.data+0x7350): first defined here make[4]: *** [drivers/media/video/built-in.o] Error 1 <-- snip --> Since this variables were needlessly global, this patch implements the trivial fix of making them static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5015): Add support for more Encore TV cardsJuan Pablo Sormani
Signed-off-by: Juan Pablo Sormani <sorman@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (4961): Add support for the ASUS P7131 remote controlHermann Pitton
Besides adding the board specific code, this patch moves the RC5 decoding code from bt8xx to ir-functions.c to make it available for all drivers. Signed-off-by: Marc Fargas <telenieko.telenieko.com> Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-10V4L/DVB (4898): Saa7134: add support for remote control of Hauppauge HVR1110Thomas Genty
This patch adds support for the remote control bundled with the Hauppauge HVR1110 Signed-off-by: Thomas Genty <tomlohave@gmail.com> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4854): Handle errors from input_register_device()Dmitry Torokhov
Also sprinkled some input_sync() throughout the code. Acked-by: Ricardo Cerqueira <v4l@cerqueira.org> Acked-by: Oliver Endriss <o.endriss@gmx.de> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4767): Make Remote control of the Pinnacle PCTV 310i workHartmut Hackmann
The remote control works, but we still need a better keymap. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4728): Add support for AverMedia AverTV Studio 507Mikhail Fedotov
This is just an additional analog board configuration. Signed-off-by: Mikhail Fedotov <mo_fedotov.mail.ru> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13[dvb saa7134] Fix missing 'break' for avermedia card caseLinus Torvalds
Commit 450efcfd2e1d941e302a8c89322fbfcef237be98 broke Avermedia 777 support. Added obvious missing "break" statement. Cc: José Suárez <j.suarez.agapito@gmail.com> Cc: Michael Krufky <mkrufky@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13V4L/DVB (4815): Remote support for Avermedia A16ARpasky@ucw.cz
The remote as well as the GPIO interface is the same as what comes with 777. For an example of mplayer lirc configuration, see http://pasky.or.cz/~pasky/dev/v4l/lircrc Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-13V4L/DVB (4814): Remote support for Avermedia 777pasky@ucw.cz
I didn't test it personally since I don't have this card, but A16AR uses the same interface and that one certainly does work perfectly (see the next patch). This patch was originally sent in http://marc.theaimsgroup.com/?l=linux-video&m=114743413825375&w=2 https://www.redhat.com/mailman/private/video4linux-list/2006-May/msg00103.html but never got applied. This version has some trivial modifications and drops the weird gpio hack (it's not clear what practical purpose does it serve). Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-03V4L/DVB (4671): Support for SAA7134-based AVerTV Hybrid A16ARPetr Baudis
This adds support for a hybrid PAL/DVB/FM card. Unfortunately I tested only the DVB since I don't have any proper antenna available and I can receive even the DVB just barely so; I can hear noise in the FM part but I couldn't catch any station, then again I don't have an FM antenna either. The PAL/FM and IR control data are based on what I harvested on the 'net. Perhaps I or someone else will fix them if they turn out to be wrong. Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4629): Saa7134: add card support for Proteus Pro 2309Michal Majchrowicz
Add card support for Proteus Pro 2309, based on saa7130 bridge Signed-off-by: Michal Majchrowicz <mmajchrowicz@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4023): Subject: Pinnacle PCTV grey remote control supportSylvain Pasche
This adds support for the older (?) Pinnacle PCTV remotes (with all buttons colored in grey). There's no autodetection for the type of remote, though; saa7134 defaults to the colored one, to use the grey remote the "pinnacle_remote=1" option must be passed to the saa7134 module Signed-off-by: Sylvain Pasche <sylvain.pasche@gmail.com> Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-27V4L/DVB (3369): LifeView FlyDVB-T Duo: add support for remote controlRudo Thomas
The remote controller on the LifeView FlyDVB-T Duo card work flawlessly with the same settings as the LifeView FlyDVB-T LR301 card. Signed-off-by: Rudo Thomas <rudo@matfyz.cz> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-22 00:03:49 +0000