summaryrefslogtreecommitdiff
path: root/drivers/media/video/saa7134
AgeCommit message (Collapse)Author
2009-12-08V4L/DVB (13314): saa7134: set ts_force_val for the Hauppauge WinTV HVR-1150Michael Krufky
commit 22370ef5035f206283505409c9a64a595c5c7320 upstream. The Hauppauge WinTV HVR-1150 retail boards require the FORCE_TS_VALID bit to be set in order to function properly. This change will work on the early revisions on the board as well, but the final revision will not function without this change. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-08V4L/DVB (13313): saa7134: add support for FORCE_TS_VALID mode for mpeg ts inputMichael Krufky
commit 4007a672abd88091e3cced158ec491d41c0c454c upstream. When FORCE_TS_VALID mode is enabled, the saa713x will accept MPEG TS input without requiring TS_VALID set high. This is required for some new boards to function properly, due to the hardware design implementation. The configuration is toggled within the board setup configuration. Boards that do not have this bit set will function as before with no change. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05saa7134: ir-kbd-i2c init data needs a persistent objectBrian Rogers
commit 7aedd5ec87686c557d48584d69ad880c11a0984d upstream. Tested on MSI TV@nywhere Plus. Original commit message: ir-kbd-i2c's ir_probe() function can be called much later (i.e. at ir-kbd-i2c module load), than the lifetime of a struct IR_i2c_init_data allocated off of the stack in cx18_i2c_new_ir() at registration time. Make sure we pass a pointer to a persistent IR_i2c_init_data object at i2c registration time. Thanks to Brian Rogers, Dustin Mitchell, Andy Walls and Jean Delvare to rise this question. Before this patch, if ir-kbd-i2c were probed after SAA7134, trash data were used. Compile tested only, but the patch is identical to em28xx one. So, it should work properly. Original-patch-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> [brian@xyzw.org: backported for 2.6.31] Signed-off-by: Brian Rogers <brian@xyzw.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-13V4L/DVB (12391): saa7134: Use correct product name for Hauppauge ↵Michael Krufky
WinTV-HVR1120 DVB-T/Hybrid Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12390): saa7134: Use correct product name for Hauppauge ↵Michael Krufky
WinTV-HVR1150 ATSC/QAM-Hybrid Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-23V4L/DVB (11906): saa7134: Use v4l bounding/alignment functionTrent Piepho
The v4l function has a better algorithm for aligning image size. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11996): saa7134: add support for AVerMedia M103 (f736)Barry Kitson
Add 1461:f736 to the list of identifiers corresponding to the SAA7134_BOARD_AVERMEDIA_M103 board. This patch adds support for a variant of the AVerMedia M103 MiniPCI DVB-T Hybrid card. Signed-off-by: Barry Kitson <b.kitson@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11990): saa7134-video.c: fix the block bugfigo.zhang
when re-open or re-start (video_streamon), the q->curr would not be NULL in saa7134_buffer_queue(), and all the qbuf will add to q->queue list,no one to do activate to start DMA,and then no interrupt would happened,so it will be block. In VIDEOBUF_NEEDS_INIT state, initialize the curr pointer to be NULL in the buffer_prepare(). Signed-off-by: Figo.zhang <figo.zhang@kolorific.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 driversHans Verkuil
Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11938): big rework of TS for saa7134Dmitri Belimov
1. Add start/stop TS function. 2. Move setup DMA of TS to DMA function. 3. Write support cupture via MMAP 4. Rework startup and finish process, remove simple FSM. Tested-by: Hermann Pitton <hermann-pitton@arcor.de> Tested-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Alexey Osipov <lion-simba@pridelands.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11861): saa7134: enable digital tv support for Hauppauge ↵Michael Krufky
WinTV-HVR1110r3 Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11860): saa7134: fix quirk in saa7134_i2c_xfer for the saa7131 bridgeMichael Krufky
The i2c quirk in the saa7134_i2c_xfer function does a bogus write to i2c address 0xfd, to work around a bug in the silicon that affects read transactions. Unfortunately, this hack is not working properly, since the bogus write is to 0xfd, an invalid i2c address. Fix this quirk by using an actual valid i2c address, 0xfe, which is still unlikely to be used as an i2c address for any actual i2c client. This is required in order to properly communicate with a TDA10048 DVB-T demod located at i2c address 0x10 on the primary i2c bus. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11853): minor have assigned value twicefigo.zhang
The variable minor have assigned value twice, the first time is in the initial "video_device" data struct in those drivers, pls see saa7134-video.c,line 2503. --- Signed-off-by: Figo.zhang <figo.zhang@kolorific.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11852): saa7134-video.c: poll method lose race conditionfigo.zhang
saa7134-video.c: poll method lose race condition Signed-off-by: Figo Zhang <figo.zhang@kolorific.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11848): saa7134: Simplify handling of IR on AVerMedia Cardbus E506RJean Delvare
Now that we instantiate I2C IR devices explicitly, we can skip probing altogether on boards where the I2C IR device address is known. The AVerMedia Cardbus E506R is one of these boards. Tested-by: Oldrich Jedlicka <oldium.pro@seznam.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11847): saa7134: Simplify handling of IR on MSI TV@nywhere PlusJean Delvare
Now that we instantiate I2C IR devices explicitly, we can skip probing altogether on boards where the I2C IR device address is known. The MSI TV@nywhere Plus is one of these boards. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11845): ir-kbd-i2c: Use initialization dataJean Delvare
For specific boards, pass initialization data to ir-kbd-i2c instead of modifying the settings after the device is initialized. This is more efficient and easier to read. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11844): ir-kbd-i2c: Switch to the new-style device binding modelJean Delvare
Let card drivers probe for IR receiver devices and instantiate them if found. Ultimately it would be better if we could stop probing completely, but I suspect this won't be possible for all card types. There's certainly room for cleanups. For example, some drivers are sharing I2C adapter IDs, so they also had to share the list of I2C addresses being probed for an IR receiver. Now that each driver explicitly says which addresses should be probed, maybe some addresses can be dropped from some drivers. Also, the special cases in saa7134-i2c should probably be handled on a per-board basis. This would be more efficient and less risky than always probing extra addresses on all boards. I'll give it a try later. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11843): ir-kbd-i2c: Don't use i2c_client.name for our own needsJean Delvare
In the standard device driver binding model, the name field of struct i2c_client is used to match devices to their drivers, so we must stop using it for internal purposes. Define a separate field in struct IR_i2c as a replacement, and use it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11734): remove hw reset of MPEG encoder when lost/found seq.Dmitri Belimov
When we capture signal from composite input offen lost and found syncro sequence. In this case the MPEG coder hardware reset after each lost/found event. The image has a lot of artefactes. This patch remove hardware reset of MPEG encoder. This is patch from our customer. I checked this. With my best regards, Dmitry. Signed-off-by: Alexey Osipov <lion-simba@pridelands.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11733): increase MPEG encoder timoutDmitri Belimov
If video has a lot of changes in frame, MPEG encoder need more time for coding process. Add new bigger timeout for encoder. This is patch from our customer. I checked this. Signed-off-by: Alexey Osipov <lion-simba@pridelands.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11732): saa7134: disable not yet existing IR and DVB support on the ↵hermann pitton
Compro T750 The Compro VideoMate T750 has no support for IR and DVB-T yet. Disable both to avoid fall through and confusing printouts. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11604): saa7134: split Behold`s card entries to properly identify ↵Dmitri Belimov
the model Split Beholdr`s cards to correct models. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11567): saa7134: Added support for AVerMedia Cardbus PlusOldřich Jedlička
Here comes the full support for AVerMedia Cardbus Plus (E501R) - including remote control. TV, Composite and FM radio tested, I don't have S-Video to test. I've figured out that the radio works only with xtal frequency 13MHz. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11442): saa7134: BZ#7524: Add AVerTV Studio 507UA supportAndy Shevchenko
[mchehab@redhat.com: Fix merge conflicts and CodingStyle issues] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06V4L/DVB (11386): saa7134: Add analog RF tuner support for Avermedia A700 ↵Matthias Schwarzott
DVB-S Hybrid+FM card Thanks to panagonov <panagonov@mail.bg> for requesting support and testing patches. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11377): v4l: increase version numbers of drivers converted to ↵Hans Verkuil
v4l2_subdev. With all the v4l2_subdev changes that were made to these drivers it is a good idea to increase the version number of each driver. It's just the patch level that is increased, except for the zoran and saa7146 drivers where the minor number was increased due to the more substantial changes that were made to those two drivers. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11375): v4l2: use v4l2_i2c_new_probed_subdev_addr where appropriate.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11373): v4l2-common: add explicit v4l2_device pointer as first arg ↵Hans Verkuil
to new_(probed)_subdev The functions v4l2_i2c_new_subdev and v4l2_i2c_new_probed_subdev relied on i2c_get_adapdata to return the v4l2_device. However, this is not always possible on embedded platforms. So modify the API to pass the v4l2_device pointer explicitly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11370): v4l2-subdev: move s_std from tuner to core.Hans Verkuil
s_std didn't belong in the tuner ops. Stricly speaking it should be part of the video ops, but it is used by audio and tuner devices as well, so it is more efficient to make it part of the core ops. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11368): v4l2-subdev: move s_standby from core to tuner.Hans Verkuil
s_standby is only used to put the tuner in powersaving mode, so move it from core to tuner. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11282): saa7134: add RDS support.Hans Verkuil
The Terratec Cinergy 600 TV MK3 supports the RDS decoder saa6588. Add support to saa7134 for such devices. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11253): saa7134: fix RTD Embedded Technologies VFG7350 support.Hans Verkuil
This card has the saa6752hs on 7-bit address 0x21 instead of 0x20. Add support in the card definition struct to select which address to use and update the definitions accordingly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11127): Kconfig: replace all occurrences of CUSTOMIZE to CUSTOMISEMauro Carvalho Chehab
There are several Kconfig items using CUSTOMIZE. Yet, most use the English writing CUSTOMISE. This generates lots of trouble, because people sometimes type the Kbuild item different. Let's standardise every occurrence using the same syntax. The changes were generated by this small shell script: for i in `find linux -type f`; do sed s,CUSTOMIZE,CUSTOMISE,g $i >/tmp/a && mv /tmp/a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11053): saa7134: set v4l2_dev field of video_deviceHans Verkuil
The v4l2_dev field of video_device wasn't initialized. The parent field is derived from v4l2_dev, so that doesn't need to be set anymore. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10926): saa7134: enable digital tv support for Hauppauge WinTV-HVR1120Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10924): saa7134: enable serial transport streaming interfaceMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10923): saa7134: fix typo in product nameMichael Krufky
replace occurances of "HVR1150" with "HVR1120" - this was a typo. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10907): avoid loading the entire videodev.h header on V4L2 driversMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10877): saa7134: add analog support for Hauppauge HVR1110r3 boardsMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10842): Adds some missing frontend selects for saa7134 and dvb-usbMauro Carvalho Chehab
Some dvb frontends are required on some boards, but those dependencies were missed. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10835): Kconfig: Add some missing selects for a required frontendsMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10823): saa7134: add DVB support for Avermedia A700 cardsMatthias Schwarzott
Add DVB support for Avermedia DVB-S Pro and Avermedia DVB-S Hybrid+FM card both labled A700. They use zl10313 demod (driver mt312) and zl10036 tuner. [mchehab@redhat.com: change __FUNCTION__ into __func__] Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10698): v4l2-common: remove v4l2_ctrl_query_fill_stdHans Verkuil
The v4l2_ctrl_query_fill_std() function wasn't one the best idea I ever had. It doesn't add anything valuable that cannot be expressed equally well with v4l2_ctrl_query_fill and only adds overhead. Replace it with v4l2_ctrl_query_fill() everywhere it is used and remove it from v4l2_common.c. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10632): Added support for AVerMedia Cardbus Hybrid remote controlOldřich Jedlička
Added support for I2C device at address 0x40 and subaddress 0x0d/0x0b that provides remote control key reading support for AVerMedia Cardbus Hybrid card, possibly for other AVerMedia Cardbus cards. The I2C address 0x40 doesn't like the SAA7134's 0xfd quirk, so it was disabled. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10574): saa7134: fix Avermedia E506R composite inputTim Farrington
Make correction to composite input plus svideo input to Avermedia E506R Signed-off-by: Tim Farrington <timf@iinet.net.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10544): v4l2-common: add comments warning that about the sort orderHans Verkuil
Control arrays as are used with v4l2_ctrl_next must be sorted from low to high. Add a comment at the top of all such arrays to warn about this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10511): saa7134: get rid of KBLMauro Carvalho Chehab
KBL is not needed on saa7134, so, let's remove it. However, we should take some care to avoid opening the module while initializing it. This issue exists with newer udev's that opens a device as soon as the driver is registered. So, a proper lock is needed on open. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-25 15:43:49 +0000