summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2021-11-04Merge tag 'v4.4.291' into toradex_vf_4.4-nexttoradex_vf_4.4-nexttoradex_vf_4.4Max Krummenacher
This is the 4.4.291 stable release Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2021-11-02mmc: sdhci: Map more voltage level to SDHCI_POWER_330Shawn Guo
commit 4217d07b9fb328751f877d3bd9550122014860a2 upstream. On Thundercomm TurboX CM2290, the eMMC OCR reports vdd = 23 (3.5 ~ 3.6 V), which is being treated as an invalid value by sdhci_set_power_noreg(). And thus eMMC is totally broken on the platform. [ 1.436599] ------------[ cut here ]------------ [ 1.436606] mmc0: Invalid vdd 0x17 [ 1.436640] WARNING: CPU: 2 PID: 69 at drivers/mmc/host/sdhci.c:2048 sdhci_set_power_noreg+0x168/0x2b4 [ 1.436655] Modules linked in: [ 1.436662] CPU: 2 PID: 69 Comm: kworker/u8:1 Tainted: G W 5.15.0-rc1+ #137 [ 1.436669] Hardware name: Thundercomm TurboX CM2290 (DT) [ 1.436674] Workqueue: events_unbound async_run_entry_fn [ 1.436685] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.436692] pc : sdhci_set_power_noreg+0x168/0x2b4 [ 1.436698] lr : sdhci_set_power_noreg+0x168/0x2b4 [ 1.436703] sp : ffff800010803a60 [ 1.436705] x29: ffff800010803a60 x28: ffff6a9102465f00 x27: ffff6a9101720a70 [ 1.436715] x26: ffff6a91014de1c0 x25: ffff6a91014de010 x24: ffff6a91016af280 [ 1.436724] x23: ffffaf7b1b276640 x22: 0000000000000000 x21: ffff6a9101720000 [ 1.436733] x20: ffff6a9101720370 x19: ffff6a9101720580 x18: 0000000000000020 [ 1.436743] x17: 0000000000000000 x16: 0000000000000004 x15: ffffffffffffffff [ 1.436751] x14: 0000000000000000 x13: 00000000fffffffd x12: ffffaf7b1b84b0bc [ 1.436760] x11: ffffaf7b1b720d10 x10: 000000000000000a x9 : ffff800010803a60 [ 1.436769] x8 : 000000000000000a x7 : 000000000000000f x6 : 00000000fffff159 [ 1.436778] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff [ 1.436787] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6a9101718d80 [ 1.436797] Call trace: [ 1.436800] sdhci_set_power_noreg+0x168/0x2b4 [ 1.436805] sdhci_set_ios+0xa0/0x7fc [ 1.436811] mmc_power_up.part.0+0xc4/0x164 [ 1.436818] mmc_start_host+0xa0/0xb0 [ 1.436824] mmc_add_host+0x60/0x90 [ 1.436830] __sdhci_add_host+0x174/0x330 [ 1.436836] sdhci_msm_probe+0x7c0/0x920 [ 1.436842] platform_probe+0x68/0xe0 [ 1.436850] really_probe.part.0+0x9c/0x31c [ 1.436857] __driver_probe_device+0x98/0x144 [ 1.436863] driver_probe_device+0xc8/0x15c [ 1.436869] __device_attach_driver+0xb4/0x120 [ 1.436875] bus_for_each_drv+0x78/0xd0 [ 1.436881] __device_attach_async_helper+0xac/0xd0 [ 1.436888] async_run_entry_fn+0x34/0x110 [ 1.436895] process_one_work+0x1d0/0x354 [ 1.436903] worker_thread+0x13c/0x470 [ 1.436910] kthread+0x150/0x160 [ 1.436915] ret_from_fork+0x10/0x20 [ 1.436923] ---[ end trace fcfac44cb045c3a8 ]--- Fix the issue by mapping MMC_VDD_35_36 (and MMC_VDD_34_35) to SDHCI_POWER_330 as well. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211004024935.15326-1-shawn.guo@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-02mmc: dw_mmc: exynos: fix the finding clock sample valueJaehoon Chung
commit 697542bceae51f7620af333b065dd09d213629fb upstream. Even though there are candiates value if can't find best value, it's returned -EIO. It's not proper behavior. If there is not best value, use a first candiate value to work eMMC. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Cc: stable@vger.kernel.org Fixes: c537a1c5ff63 ("mmc: dw_mmc: exynos: add variable delay tuning sequence") Link: https://lore.kernel.org/r/20211022082106.1557-1-jh80.chung@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-02mmc: vub300: fix control-message timeoutsJohan Hovold
commit 8c8171929116cc23f74743d99251eedadf62341a upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211025115608.5287-1-johan@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-16Merge tag 'v4.4.288' into toradex_vf_4.4Max Krummenacher
This is the 4.4.288 stable release Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2021-09-22mmc: rtsx_pci: Fix long reads when clock is prescaledThomas Hebb
[ Upstream commit 3ac5e45291f3f0d699a721357380d4593bc2dcb3 ] For unexplained reasons, the prescaler register for this device needs to be cleared (set to 1) while performing a data read or else the command will hang. This does not appear to affect the real clock rate sent out on the bus, so I assume it's purely to work around a hardware bug. During normal operation, the prescaler is already set to 1, so nothing needs to be done. However, in "initial mode" (which is used for sub-MHz clock speeds, like the core sets while enumerating cards), it's set to 128 and so we need to reset it during data reads. We currently fail to do this for long reads. This has no functional affect on the driver's operation currently written, as the MMC core always sets a clock above 1MHz before attempting any long reads. However, the core could conceivably set any clock speed at any time and the driver should still work, so I think this fix is worthwhile. I personally encountered this issue while performing data recovery on an external chip. My connections had poor signal integrity, so I modified the core code to reduce the clock speed. Without this change, I saw the card enumerate but was unable to actually read any data. Writes don't seem to work in the situation described above even with this change (and even if the workaround is extended to encompass data write commands). I was not able to find a way to get them working. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Link: https://lore.kernel.org/r/2fef280d8409ab0100c26c6ac7050227defd098d.1627818365.git.tommyhebb@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22mmc: moxart: Fix issue with uninitialized dma_slave_configTony Lindgren
[ Upstream commit ee5165354d498e5bceb0b386e480ac84c5f8c28c ] Depending on the DMA driver being used, the struct dma_slave_config may need to be initialized to zero for the unused data. For example, we have three DMA drivers using src_port_window_size and dst_port_window_size. If these are left uninitialized, it can cause DMA failures. For moxart, this is probably not currently an issue but is still good to fix though. Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver") Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210810081644.19353-3-tony@atomide.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22mmc: dw_mmc: Fix issue with uninitialized dma_slave_configTony Lindgren
[ Upstream commit c3ff0189d3bc9c03845fe37472c140f0fefd0c79 ] Depending on the DMA driver being used, the struct dma_slave_config may need to be initialized to zero for the unused data. For example, we have three DMA drivers using src_port_window_size and dst_port_window_size. If these are left uninitialized, it can cause DMA failures. For dw_mmc, this is probably not currently an issue but is still good to fix though. Fixes: 3fc7eaef44db ("mmc: dw_mmc: Add external dma interface support") Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210810081644.19353-2-tony@atomide.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26mmc: dw_mmc: Fix occasional hang after tuning on eMMCDouglas Anderson
[ Upstream commit ba2d139b02ba684c6c101de42fed782d6cd2b997 ] In commit 46d179525a1f ("mmc: dw_mmc: Wait for data transfer after response errors.") we fixed a tuning-induced hang that I saw when stress testing tuning on certain SD cards. I won't re-hash that whole commit, but the summary is that as a normal part of tuning you need to deal with transfer errors and there were cases where these transfer errors was putting my system into a bad state causing all future transfers to fail. That commit fixed handling of the transfer errors for me. In downstream Chrome OS my fix landed and had the same behavior for all SD/MMC commands. However, it looks like when the commit landed upstream we limited it to only SD tuning commands. Presumably this was to try to get around problems that Alim Akhtar reported on exynos [1]. Unfortunately while stress testing reboots (and suspend/resume) on some rk3288-based Chromebooks I found the same problem on the eMMC on some of my Chromebooks (the ones with Hynix eMMC). Since the eMMC tuning command is different (MMC_SEND_TUNING_BLOCK_HS200 vs. MMC_SEND_TUNING_BLOCK) we were basically getting back into the same situation. I'm hoping that whatever problems exynos was having in the past are somehow magically fixed now and we can make the behavior the same for all commands. [1] https://lkml.kernel.org/r/CAGOxZ53WfNbaMe0_AM0qBqU47kAfgmPBVZC8K8Y-_J3mDMqW4A@mail.gmail.com Fixes: 46d179525a1f ("mmc: dw_mmc: Wait for data transfer after response errors.") Signed-off-by: Douglas Anderson <dianders@chromium.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Alim Akhtar <alim.akhtar@gmail.com> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26mmc: dw_mmc: Fix hang on data CRC errorVincent Whitchurch
[ Upstream commit 25f8203b4be1937c4939bb98623e67dcfd7da4d1 ] When a Data CRC interrupt is received, the driver disables the DMA, then sends the stop/abort command and then waits for Data Transfer Over. However, sometimes, when a data CRC error is received in the middle of a multi-block write transfer, the Data Transfer Over interrupt is never received, and the driver hangs and never completes the request. The driver sets the BMOD.SWR bit (SDMMC_IDMAC_SWRESET) when stopping the DMA, but according to the manual CMD.STOP_ABORT_CMD should be programmed "before assertion of SWR". Do these operations in the recommended order. With this change the Data Transfer Over is always received correctly in my tests. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210630102232.16011-1-vincent.whitchurch@axis.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26mmc: dw_mmc: call the dw_mci_prep_stop_abort() by defaultJaehoon Chung
[ Upstream commit e13c3c081845b51e8ba71a90e91c52679cfdbf89 ] stop_cmdr should be set to values relevant to stop command. It migth be assigned to values whatever there is mrq->stop or not. Then it doesn't need to use dw_mci_prepare_command(). It's enough to use the prep_stop_abort for preparing stop command. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26mmc: dw_mmc: Wait for data transfer after response errors.Doug Anderson
[ Upstream commit 46d179525a1f6d16957dcb4624517bc04142b3e7 ] According to the DesignWare state machine description, after we get a "response error" or "response CRC error" we move into data transfer mode. That means that we don't necessarily need to special case trying to deal with the failure right away. We can wait until we are notified that the data transfer is complete (with or without errors) and then we can deal with the failure. It may sound strange to defer dealing with a command that we know will fail anyway, but this appears to fix a bug. During tuning (CMD19) on a specific card on an rk3288-based system, we found that we could get a "response CRC error". Sending the stop command after the "response CRC error" would then throw the system into a confused state causing all future tuning phases to report failure. When in the confused state, the controller would show these (hex codes are interrupt status register): CMD ERR: 0x00000046 (cmd=19) CMD ERR: 0x0000004e (cmd=12) DATA ERR: 0x00000208 DATA ERR: 0x0000020c CMD ERR: 0x00000104 (cmd=19) CMD ERR: 0x00000104 (cmd=12) DATA ERR: 0x00000208 DATA ERR: 0x0000020c ... ... It is inherently difficult to deal with the complexity of trying to correctly send a stop command while a data transfer is taking place since you need to deal with different corner cases caused by the fact that the data transfer could complete (with errors or without errors) during various places in sending the stop command (dw_mci_stop_dma, send_stop_abort, etc) Instead of adding a bunch of extra complexity to deal with this, it seems much simpler to just use the more straightforward (and less error-prone) path of letting the data transfer finish. There shouldn't be any huge benefit to sending the stop command slightly earlier, anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Alim Akhtar <alim.akhtar@gmail.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20mmc: sdhci: Fix warning message when accessing RPMB in HS400 modeAl Cooper
commit d0244847f9fc5e20df8b7483c8a4717fe0432d38 upstream. When an eMMC device is being run in HS400 mode, any access to the RPMB device will cause the error message "mmc1: Invalid UHS-I mode selected". This happens as a result of tuning being disabled before RPMB access and then re-enabled after the RPMB access is complete. When tuning is re-enabled, the system has to switch from HS400 to HS200 to do the tuning and then back to HS400. As part of sequence to switch from HS400 to HS200 the system is temporarily put into HS mode. When switching to HS mode, sdhci_get_preset_value() is called and does not have support for HS mode and prints the warning message and returns the preset for SDR12. The fix is to add support for MMC and SD HS modes to sdhci_get_preset_value(). This can be reproduced on any system running eMMC in HS400 mode (not HS400ES) by using the "mmc" utility to run the following command: "mmc rpmb read-counter /dev/mmcblk0rpmb". Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 52983382c74f ("mmc: sdhci: enhance preset value function") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210624163045.33651-1-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20mmc: vub3000: fix control-request directionJohan Hovold
commit 3c0bb3107703d2c58f7a0a7a2060bb57bc120326 upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the SET_ROM_WAIT_STATES request which erroneously used usb_rcvctrlpipe(). Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210521133026.17296-1-johan@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20mmc: usdhi6rol0: fix error return code in usdhi6_probe()Zhen Lei
[ Upstream commit 2f9ae69e5267f53e89e296fccee291975a85f0eb ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 75fa9ea6e3c0 ("mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210508020321.1677-1-thunder.leizhen@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20mmc: via-sdmmc: add a check against NULL pointer dereferenceZheyu Ma
[ Upstream commit 45c8ddd06c4b729c56a6083ab311bfbd9643f4a6 ] Before referencing 'host->data', the driver needs to check whether it is null pointer, otherwise it will cause a null pointer reference. This log reveals it: [ 29.355199] BUG: kernel NULL pointer dereference, address: 0000000000000014 [ 29.357323] #PF: supervisor write access in kernel mode [ 29.357706] #PF: error_code(0x0002) - not-present page [ 29.358088] PGD 0 P4D 0 [ 29.358280] Oops: 0002 [#1] PREEMPT SMP PTI [ 29.358595] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4- g70e7f0549188-dirty #102 [ 29.359164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 29.359978] RIP: 0010:via_sdc_isr+0x21f/0x410 [ 29.360314] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00 10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43 18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77 [ 29.361661] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046 [ 29.362042] RAX: 0000000000000000 RBX: ffff888107d77880 RCX: 0000000000000000 [ 29.362564] RDX: 0000000000000000 RSI: ffffffff835d20bb RDI: 00000000ffffffff [ 29.363085] RBP: ffffc90000118ed8 R08: 0000000000000001 R09: 0000000000000001 [ 29.363604] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000008600 [ 29.364128] R13: ffff888107d779c8 R14: ffffc90009c00200 R15: 0000000000008000 [ 29.364651] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 29.365235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.365655] CR2: 0000000000000014 CR3: 0000000005a2e000 CR4: 00000000000006e0 [ 29.366170] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 29.366683] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 29.367197] Call Trace: [ 29.367381] <IRQ> [ 29.367537] __handle_irq_event_percpu+0x53/0x3e0 [ 29.367916] handle_irq_event_percpu+0x35/0x90 [ 29.368247] handle_irq_event+0x39/0x60 [ 29.368632] handle_fasteoi_irq+0xc2/0x1d0 [ 29.368950] __common_interrupt+0x7f/0x150 [ 29.369254] common_interrupt+0xb4/0xd0 [ 29.369547] </IRQ> [ 29.369708] asm_common_interrupt+0x1e/0x40 [ 29.370016] RIP: 0010:native_safe_halt+0x17/0x20 [ 29.370360] Code: 07 0f 00 2d db 80 43 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 c2 37 e5 01 55 48 89 e5 85 c0 7e 07 0f 00 2d bb 80 43 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d f9 91 [ 29.371696] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 29.372079] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 29.372595] RDX: 0000000000000000 RSI: ffffffff854f67a4 RDI: ffffffff85403406 [ 29.373122] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 29.373646] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86009188 [ 29.374160] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100258000 [ 29.374690] default_idle+0x9/0x10 [ 29.374944] arch_cpu_idle+0xa/0x10 [ 29.375198] default_idle_call+0x6e/0x250 [ 29.375491] do_idle+0x1f0/0x2d0 [ 29.375740] cpu_startup_entry+0x18/0x20 [ 29.376034] start_secondary+0x11f/0x160 [ 29.376328] secondary_startup_64_no_verify+0xb0/0xbb [ 29.376705] Modules linked in: [ 29.376939] Dumping ftrace buffer: [ 29.377187] (ftrace buffer empty) [ 29.377460] CR2: 0000000000000014 [ 29.377712] ---[ end trace 51a473dffb618c47 ]--- [ 29.378056] RIP: 0010:via_sdc_isr+0x21f/0x410 [ 29.378380] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00 10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43 18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77 [ 29.379714] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046 [ 29.380098] RAX: 0000000000000000 RBX: ffff888107d77880 RCX: 0000000000000000 [ 29.380614] RDX: 0000000000000000 RSI: ffffffff835d20bb RDI: 00000000ffffffff [ 29.381134] RBP: ffffc90000118ed8 R08: 0000000000000001 R09: 0000000000000001 [ 29.381653] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000008600 [ 29.382176] R13: ffff888107d779c8 R14: ffffc90009c00200 R15: 0000000000008000 [ 29.382697] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 29.383277] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.383697] CR2: 0000000000000014 CR3: 0000000005a2e000 CR4: 00000000000006e0 [ 29.384223] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 29.384736] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 29.385260] Kernel panic - not syncing: Fatal exception in interrupt [ 29.385882] Dumping ftrace buffer: [ 29.386135] (ftrace buffer empty) [ 29.386401] Kernel Offset: disabled [ 29.386656] Rebooting in 1 seconds.. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/1622727200-15808-1-git-send-email-zheyuma97@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-07Merge tag 'v4.4.274' into toradex_vf_4.4-nextMarcel Ziswiler
Linux 4.4.274
2021-05-22mmc: core: Set read only for SD cards with permanent write protect bitSeunghui Lee
commit 917a5336f2c27928be270226ab374ed0cbf3805d upstream. Some of SD cards sets permanent write protection bit in their CSD register, due to lifespan or internal problem. To avoid unnecessary I/O write operations, let's parse the bits in the CSD during initialization and mark the card as read only for this case. Signed-off-by: Seunghui Lee <sh043.lee@samsung.com> Link: https://lore.kernel.org/r/20210222083156.19158-1-sh043.lee@samsung.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22mmc: core: Do a power cycle when the CMD11 failsDooHyun Hwang
commit 147186f531ae49c18b7a9091a2c40e83b3d95649 upstream. A CMD11 is sent to the SD/SDIO card to start the voltage switch procedure into 1.8V I/O. According to the SD spec a power cycle is needed of the card, if it turns out that the CMD11 fails. Let's fix this, to allow a retry of the initialization without the voltage switch, to succeed. Note that, whether it makes sense to also retry with the voltage switch after the power cycle is a bit more difficult to know. At this point, we treat it like the CMD11 isn't supported and therefore we skip it when retrying. Signed-off-by: DooHyun Hwang <dh0421.hwang@samsung.com> Link: https://lore.kernel.org/r/20210210045936.7809-1-dh0421.hwang@samsung.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17mmc: core: Fix partition switch time for eMMCAdrian Hunter
commit 66fbacccbab91e6e55d9c8f1fc0910a8eb6c81f7 upstream. Avoid the following warning by always defining partition switch time: [ 3.209874] mmc1: unspecified timeout for CMD6 - use generic [ 3.222780] ------------[ cut here ]------------ [ 3.233363] WARNING: CPU: 1 PID: 111 at drivers/mmc/core/mmc_ops.c:575 __mmc_switch+0x200/0x204 Reported-by: Paul Fertser <fercerpav@gmail.com> Fixes: 1c447116d017 ("mmc: mmc: Fix partition switch timeout for some eMMCs") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/168bbfd6-0c5b-5ace-ab41-402e7937c46e@intel.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17mmc: mediatek: fix race condition between msdc_request_timeout and irqChaotian Jing
[ Upstream commit 0354ca6edd464a2cf332f390581977b8699ed081 ] when get request SW timeout, if CMD/DAT xfer done irq coming right now, then there is race between the msdc_request_timeout work and irq handler, and the host->cmd and host->data may set to NULL in irq handler. also, current flow ensure that only one path can go to msdc_request_done(), so no need check the return value of cancel_delayed_work(). Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Link: https://lore.kernel.org/r/20201218071611.12276-1-chaotian.jing@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-17mmc: mxs-mmc: Fix a resource leak in an error handling path in 'mxs_mmc_probe()'Christophe JAILLET
[ Upstream commit 0bb7e560f821c7770973a94e346654c4bdccd42c ] If 'mmc_of_parse()' fails, we must undo the previous 'dma_request_chan()' call. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201208203527.49262-1-christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07mmc: sdhci-esdhc-imx: fix kernel panic when remove moduleFrank Li
commit a56f44138a2c57047f1ea94ea121af31c595132b upstream. In sdhci_esdhc_imx_remove() the SDHCI_INT_STATUS in read. Under some circumstances, this may be done while the device is runtime suspended, triggering the below splat. Fix the problem by adding a pm_runtime_get_sync(), before reading the register, which will turn on clocks etc making the device accessible again. [ 1811.323148] mmc1: card aaaa removed [ 1811.347483] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 1811.354988] Modules linked in: sdhci_esdhc_imx(-) sdhci_pltfm sdhci cqhci mmc_block mmc_core [last unloaded: mmc_core] [ 1811.365726] CPU: 0 PID: 3464 Comm: rmmod Not tainted 5.10.1-sd-99871-g53835a2e8186 #5 [ 1811.373559] Hardware name: Freescale i.MX8DXL EVK (DT) [ 1811.378705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 1811.384723] pc : sdhci_esdhc_imx_remove+0x28/0x15c [sdhci_esdhc_imx] [ 1811.391090] lr : platform_drv_remove+0x2c/0x50 [ 1811.395536] sp : ffff800012c7bcb0 [ 1811.398855] x29: ffff800012c7bcb0 x28: ffff00002c72b900 [ 1811.404181] x27: 0000000000000000 x26: 0000000000000000 [ 1811.409497] x25: 0000000000000000 x24: 0000000000000000 [ 1811.414814] x23: ffff0000042b3890 x22: ffff800009127120 [ 1811.420131] x21: ffff00002c4c9580 x20: ffff0000042d0810 [ 1811.425456] x19: ffff0000042d0800 x18: 0000000000000020 [ 1811.430773] x17: 0000000000000000 x16: 0000000000000000 [ 1811.436089] x15: 0000000000000004 x14: ffff000004019c10 [ 1811.441406] x13: 0000000000000000 x12: 0000000000000020 [ 1811.446723] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f [ 1811.452040] x9 : fefefeff6364626d x8 : 7f7f7f7f7f7f7f7f [ 1811.457356] x7 : 78725e6473607372 x6 : 0000000080808080 [ 1811.462673] x5 : 0000000000000000 x4 : 0000000000000000 [ 1811.467990] x3 : ffff800011ac1cb0 x2 : 0000000000000000 [ 1811.473307] x1 : ffff8000091214d4 x0 : ffff8000133a0030 [ 1811.478624] Call trace: [ 1811.481081] sdhci_esdhc_imx_remove+0x28/0x15c [sdhci_esdhc_imx] [ 1811.487098] platform_drv_remove+0x2c/0x50 [ 1811.491198] __device_release_driver+0x188/0x230 [ 1811.495818] driver_detach+0xc0/0x14c [ 1811.499487] bus_remove_driver+0x5c/0xb0 [ 1811.503413] driver_unregister+0x30/0x60 [ 1811.507341] platform_driver_unregister+0x14/0x20 [ 1811.512048] sdhci_esdhc_imx_driver_exit+0x1c/0x3a8 [sdhci_esdhc_imx] [ 1811.518495] __arm64_sys_delete_module+0x19c/0x230 [ 1811.523291] el0_svc_common.constprop.0+0x78/0x1a0 [ 1811.528086] do_el0_svc+0x24/0x90 [ 1811.531405] el0_svc+0x14/0x20 [ 1811.534461] el0_sync_handler+0x1a4/0x1b0 [ 1811.538474] el0_sync+0x174/0x180 [ 1811.541801] Code: a9025bf5 f9403e95 f9400ea0 9100c000 (b9400000) [ 1811.547902] ---[ end trace 3fb1a3bd48ff7be5 ]--- Signed-off-by: Frank Li <Frank.Li@nxp.com> Cc: stable@vger.kernel.org # v4.0+ Link: https://lore.kernel.org/r/20210210181933.29263-1-Frank.Li@nxp.com [Ulf: Clarified the commit message a bit] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [iwamatsu: adjust context] Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-03mmc: usdhi6rol0: Fix a resource leak in the error handling path of the probeChristophe JAILLET
[ Upstream commit 6052b3c370fb82dec28bcfff6d7ec0da84ac087a ] A call to 'ausdhi6_dma_release()' to undo a previous call to 'usdhi6_dma_request()' is missing in the error handling path of the probe function. It is already present in the remove function. Fixes: 75fa9ea6e3c0 ("mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201217210922.165340-1-christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-10mmc: core: Limit retries when analyse of SDIO tuples failsFengnan Chang
commit f92e04f764b86e55e522988e6f4b6082d19a2721 upstream. When analysing tuples fails we may loop indefinitely to retry. Let's avoid this by using a 10s timeout and bail if not completed earlier. Signed-off-by: Fengnan Chang <fengnanchang@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210123033230.36442-1-fengnanchang@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10mmc: via-sdmmc: Fix data race bugMadhuparna Bhowmik
[ Upstream commit 87d7ad089b318b4f319bf57f1daa64eb6d1d10ad ] via_save_pcictrlreg() should be called with host->lock held as it writes to pm_pcictrl_reg, otherwise there can be a race condition between via_sd_suspend() and via_sdc_card_detect(). The same pattern is used in the function via_reset_pcictrl() as well, where via_save_pcictrlreg() is called with host->lock held. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lore.kernel.org/r/20200822061528.7035-1-madhuparnabhowmik10@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29mmc: sdio: Check for CISTPL_VERS_1 buffer sizePali Rohár
[ Upstream commit 8ebe2607965d3e2dc02029e8c7dd35fbe508ffd0 ] Before parsing CISTPL_VERS_1 structure check that its size is at least two bytes to prevent buffer overflow. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200727133837.19086-2-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-27Merge tag 'v4.4.237' into toradex_vf_4.4Max Krummenacher
This is the 4.4.237 stable release Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-05-10mmc: sdhci: Fix regression setting power on Trats2 boardAdrian Hunter
commit 1dceb0415aa0c6bc11dacdab47c9ef83a3604166 upstream. Several commits relating to setting power have been introducing problems by putting driver-specific rules into generic SDHCI code. Krzysztof Kozlowski reported that after commit 918f4cbd4340 ("mmc: sdhci: restore behavior when setting VDD via external regulator") on Trats2 board there are warnings for invalid VDD value (2.8V): [ 3.119656] ------------[ cut here ]------------ [ 3.119666] WARNING: CPU: 3 PID: 90 at ../drivers/mmc/host/sdhci.c:1234 sdhci_do_set_ios+0x4cc/0x5e0 [ 3.119669] mmc0: Invalid vdd 0x10 [ 3.119673] Modules linked in: [ 3.119679] CPU: 3 PID: 90 Comm: kworker/3:1 Tainted: G W 4.5.0-next-20160324 #23 [ 3.119681] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3.119690] Workqueue: events_freezable mmc_rescan [ 3.119708] [<c010e0ac>] (unwind_backtrace) from [<c010ae10>] (show_stack+0x10/0x14) [ 3.119719] [<c010ae10>] (show_stack) from [<c0323260>] (dump_stack+0x88/0x9c) [ 3.119728] [<c0323260>] (dump_stack) from [<c011b754>] (__warn+0xe8/0x100) [ 3.119734] [<c011b754>] (__warn) from [<c011b7a4>] (warn_slowpath_fmt+0x38/0x48) [ 3.119740] [<c011b7a4>] (warn_slowpath_fmt) from [<c0527d28>] (sdhci_do_set_ios+0x4cc/0x5e0) [ 3.119748] [<c0527d28>] (sdhci_do_set_ios) from [<c0528018>] (sdhci_runtime_resume_host+0x60/0x114) [ 3.119758] [<c0528018>] (sdhci_runtime_resume_host) from [<c0402570>] (__rpm_callback+0x2c/0x60) [ 3.119767] [<c0402570>] (__rpm_callback) from [<c04025c4>] (rpm_callback+0x20/0x80) [ 3.119773] [<c04025c4>] (rpm_callback) from [<c04034b8>] (rpm_resume+0x36c/0x558) [ 3.119780] [<c04034b8>] (rpm_resume) from [<c04036f0>] (__pm_runtime_resume+0x4c/0x64) [ 3.119788] [<c04036f0>] (__pm_runtime_resume) from [<c0512728>] (__mmc_claim_host+0x170/0x1b0) [ 3.119795] [<c0512728>] (__mmc_claim_host) from [<c0514e2c>] (mmc_rescan+0x54/0x348) [ 3.119807] [<c0514e2c>] (mmc_rescan) from [<c0130dac>] (process_one_work+0x120/0x3f4) [ 3.119815] [<c0130dac>] (process_one_work) from [<c01310b8>] (worker_thread+0x38/0x554) [ 3.119823] [<c01310b8>] (worker_thread) from [<c01365a4>] (kthread+0xdc/0xf4) [ 3.119831] [<c01365a4>] (kthread) from [<c0107878>] (ret_from_fork+0x14/0x3c) [ 3.119834] ---[ end trace a22d652aa3276886 ]--- Fix by adding a 'set_power' callback and restoring the default behaviour prior to commit 918f4cbd4340 ("mmc: sdhci: restore behavior when setting VDD via external regulator"). The desired behaviour of that commit is gotten by having sdhci-pxav3 provide its own set_power callback. Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Link: http://lkml.kernel.org/r/CAJKOXPcGDnPm-Ykh6wHqV1YxfTaov5E8iVqBoBn4OJc7BnhgEQ@mail.gmail.com Fixes: 918f4cbd4340 ("mmc: sdhci: restore behavior when setting VDD...) Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v4.5+ Reviewed-by: Jisheng Zhang <jszhang@marvell.com> Tested-by: Jisheng Zhang <jszhang@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-10mmc: moxart: fix wait_for_completion_interruptible_timeout return variable typeNicholas Mc Guire
commit 41f469cac2663a41a7b0c84cb94e8f7024385ae4 upstream. wait_for_completion_timeout_interruptible returns long not unsigned long so dma_time, which is used exclusively here, is changed to long. Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-10mmc: dw_mmc: rockchip: Set the drive phase properlyDouglas Anderson
commit d4aa908c7978f60557a799ca53b5ae4166fd8355 upstream. Historically for Rockchip devices we've relied on the power-on default (or perhaps the firmware setting) to get the correct drive phase for dw_mmc devices. This worked OK for the most part, but: * Relying on the setting just "being right" is a bit fragile. * As soon as there is an instance where the power on default is wrong or where the firmware didn't configure this properly then we'll get a mysterious failure. In commit 7a03fe6f48f3 ("clk: rockchip: reset init state before mmc card initialization") we actually started setting this explicitly in the kernel, but that commit wasn't quite right and also wasn't quite enough. See <https://patchwork.kernel.org/patch/9085311/> for some details. Let's explicitly set this phase in dw_mmc. The comments inside this patch try to explain the situation quite throughly, but the high level overview of this is: Before this patch on rk3288 devices tested (after revert of the clock patch described above): * eMMC: 180 degrees * SDMMC/SDIO0/SDIO1: 90 degrees After this patch: * Use 90 degree phase offset usually. * Use 180 degree phase offset for MMC_DDR52, SDR104, HS200. That means we are _changing_ behavior for those devices in this way: * If we have HS200 eMMC or DDR52 eMMC, we'll run ID mode at 90 degrees (vs 180) but otherwise have no change. * For any non-HS200 / non-DDR52 eMMC devices we'll now _always_ run at 90 degrees (vs 180). It seems fairly unlikely that building modern hardware is using an eMMC that isn't using DDR52 or HS200, of course. * For SDR104 cards we'll now run with 180 degree phase offset (vs 90). It's expected that 90 degree phase offset would have worked OK, but this gives us extra margin. I have tested this by inserting my collection of uSD cards (mostly UHS, though a few not) into a veyron_minnie and confirmed that they still seem to enumerate properly. For a subset of them I tried putting a filesystem on them and also tried running mmc_test. Fixes: 7a03fe6f48f3 ("clk: rockchip: reset init state before mmc card initialization") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-10mmc: block: return error on failed mmc_blk_get()Olof Johansson
commit f00ab14c252ac459e86194747a1f580ab503c954 upstream. This used to return -EFAULT, but the function above returns -EINVAL on the same condition so let's stick to that. The removal of error return on this path was introduced with b093410c9aef ('mmc: block: copy resp[] data on err for MMC_IOC_MULTI_CMD'). Fixes: b093410c9aef ('mmc: block: copy resp[] data on err for MMC_IOC_MULTI_CMD'). Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Grant Grundler <grundler@google.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-10mmc: debugfs: correct wrong voltage valueChuanxiao Dong
commit 0036e74686344f1051afc3107740140abfd03616 upstream. Correct the wrong voltage value shown in debugfs for mmc/sd/sdio. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com> Fixes: 42cd95a0603e ("mmc: core: debugfs: Add signal_voltage to ios dump") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-10mmc: sd: limit SD card power limit according to cards capabilitiesRussell King
commit d9812780a020bcec44565b5950b2a8b31afb5545 upstream. The SD card specification allows cards to error out a SWITCH command where the requested function in a group is not supported. The spec provides for a set of capabilities which indicate which functions are supported. In the case of the power limit, requesting an unsupported power level via the SWITCH command fails, resulting in the power level remaining at the power-on default of 0.72W, even though the host and card may support higher powers levels. This has been seen with SanDisk 8GB cards, which support the default 0.72W and 1.44W (200mA and 400mA) in combination with an iMX6 host, supporting up to 2.88W (800mA). This currently causes us to try to set a power limit function value of '3' (2.88W) which the card errors out on, and thereby causes the power level to remain at 0.72W rather than the desired 1.44W. Arrange to limit the selected current limit by the capabilities reported by the card to avoid the SWITCH command failing. Select the highest current limit that the host and card combination support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Fixes: a39ca6ae0a08 ("mmc: core: Simplify and fix for SD switch processing") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-10mmc: sdhci: restore behavior when setting VDD via external regulatorJisheng Zhang
commit 918f4cbd4340ddd1eb389cd8efa3b07ac74ec4c0 upstream. After commit 52221610dd84 ("mmc: sdhci: Improve external VDD regulator support"), for the VDD is supplied via external regulators, we ignore the code to convert a VDD voltage request into one of the standard SDHCI voltage levels, then program it in the SDHCI_POWER_CONTROL. This brings two issues: 1. SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON quirk isn't handled properly any more. 2. What's more, once SDHCI_POWER_ON bit is set, some controllers such as the sdhci-pxav3 used in marvell berlin SoCs require the voltage levels programming in the SDHCI_POWER_CONTROL register, even the VDD is supplied by external regulator. So the host in marvell berlin SoCs still works fine after the commit. However, commit 3cbc6123a93d ("mmc: sdhci: Set SDHCI_POWER_ON with external vmmc") sets the SDHCI_POWER_ON bit, this would make the host in marvell berlin SoCs won't work any more with external vmmc. This patch restores the behavior when setting VDD through external regulator by moving the call of mmc_regulator_set_ocr() to the end of sdhci_set_power() function. After this patch, the sdcard on Marvell Berlin SoC boards work again. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Fixes: 52221610dd84 ("mmc: sdhci: Improve external VDD ...") Reviewed-by: Ludovic Desroches <ludovic.desroches@atmel.com> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-24Merge tag 'v4.4.214' into toradex_vf_4.4-nextMax Krummenacher
This is the 4.4.214 stable release
2020-02-14mmc: spi: Toggle SPI polarity, do not hardcode itLinus Walleij
commit af3ed119329cf9690598c5a562d95dfd128e91d6 upstream. The code in mmc_spi_initsequence() tries to send a burst with high chipselect and for this reason hardcodes the device into SPI_CS_HIGH. This is not good because the SPI_CS_HIGH flag indicates logical "asserted" CS not always the physical level. In some cases the signal is inverted in the GPIO library and in that case SPI_CS_HIGH is already set, and enforcing SPI_CS_HIGH again will actually drive it low. Instead of hard-coding this, toggle the polarity so if the default is LOW it goes high to assert chipselect but if it is already high then toggle it low instead. Cc: Phil Elwell <phil@raspberrypi.org> Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20191204152749.12652-1-linus.walleij@linaro.org Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29mmc: sdhci: fix minimum clock rate for v3 controllerMichał Mirosław
commit 2a187d03352086e300daa2044051db00044cd171 upstream. For SDHCIv3+ with programmable clock mode, minimal clock frequency is still base clock / max(divider). Minimal programmable clock frequency is always greater than minimal divided clock frequency. Without this patch, SDHCI uses out-of-spec initial frequency when multiplier is big enough: mmc1: mmc_rescan_try_freq: trying to init card at 468750 Hz [for 480 MHz source clock divided by 1024] The code in sdhci_calc_clk() already chooses a correct SDCLK clock mode. Fixes: c3ed3877625f ("mmc: sdhci: add support for programmable clock mode") Cc: <stable@vger.kernel.org> # 4f6aa3264af4: mmc: tegra: Only advertise UHS modes if IO regulator is present Cc: <stable@vger.kernel.org> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/ffb489519a446caffe7a0a05c4b9372bd52397bb.1579082031.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04mmc: sdhci: Update the tuning failed messages to pr_debug levelFaiz Abbas
[ Upstream commit 2c92dd20304f505b6ef43d206fff21bda8f1f0ae ] Tuning support in DDR50 speed mode was added in SD Specifications Part1 Physical Layer Specification v3.01. Its not possible to distinguish between v3.00 and v3.01 from the SCR and that is why since commit 4324f6de6d2e ("mmc: core: enable CMD19 tuning for DDR50 mode") tuning failures are ignored in DDR50 speed mode. Cards compatible with v3.00 don't respond to CMD19 in DDR50 and this error gets printed during enumeration and also if retune is triggered at any time during operation. Update the printk level to pr_debug so that these errors don't lead to false error reports. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Cc: stable@vger.kernel.org # v4.4+ Link: https://lore.kernel.org/r/20191206114326.15856-1-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04mmc: sdhci-of-esdhc: fix P2020 errata handlingYangbo Lu
commit fe0acab448f68c3146235afe03fb932e242ec94c upstream. Two previous patches introduced below quirks for P2020 platforms. - SDHCI_QUIRK_RESET_AFTER_REQUEST - SDHCI_QUIRK_BROKEN_TIMEOUT_VAL The patches made a mistake to add them in quirks2 of sdhci_host structure, while they were defined for quirks. host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST; host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; This patch is to fix them. host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST; host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; Fixes: 05cb6b2a66fa ("mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support") Fixes: a46e42712596 ("mmc: sdhci-of-esdhc: add erratum eSDHC5 support") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191216031842.40068-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04Revert "mmc: sdhci: Fix incorrect switch to HS mode"Faiz Abbas
commit 07bcc411567cb96f9d1fc84fff8d387118a2920d upstream. This reverts commit c894e33ddc1910e14d6f2a2016f60ab613fd8b37. This commit aims to treat SD High speed and SDR25 as the same while setting UHS Timings in HOST_CONTROL2 which leads to failures with some SD cards in AM65x. Revert this commit. The issue this commit was trying to fix can be implemented in a platform specific callback instead of common sdhci code. Cc: <stable@vger.kernel.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20191128110422.25917-1-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-28mmc: block: Fix tag condition with packed writesAdrian Hunter
commit d806b46e5f496a6335ebd7f8432d2533507ce9a2 upstream. Apparently a cut-and-paste error, 'do_data_tag' is using 'brq' for data size even though 'brq' has not been set up. Instead use blk_rq_sectors(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-28mmc: mediatek: fix cannot receive new request when msdc_cmd_is_ready failChaotian Jing
[ Upstream commit f38a9774ddde9d79b3487dd888edd8b8623552af ] when msdc_cmd_is_ready return fail, the req_timeout work has not been inited and cancel_delayed_work() will return false, then, the request return directly and never call mmc_request_done(). so need call mod_delayed_work() before msdc_cmd_is_ready() Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-25mmc: sdhci-of-at91: fix quirk2 overwriteEugen Hristev
commit fed23c5829ecab4ddc712d7b0046e59610ca3ba4 upstream. The quirks2 are parsed and set (e.g. from DT) before the quirk for broken HS200 is set in the driver. The driver needs to enable just this flag, not rewrite the whole quirk set. Fixes: 7871aa60ae00 ("mmc: sdhci-of-at91: add quirk for broken HS200") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-05mmc: sdhci: Fix incorrect switch to HS modeAl Cooper
[ Upstream commit c894e33ddc1910e14d6f2a2016f60ab613fd8b37 ] When switching from any MMC speed mode that requires 1.8v (HS200, HS400 and HS400ES) to High Speed (HS) mode, the system ends up configured for SDR12 with a 50MHz clock which is an illegal mode. This happens because the SDHCI_CTRL_VDD_180 bit in the SDHCI_HOST_CONTROL2 register is left set and when this bit is set, the speed mode is controlled by the SDHCI_CTRL_UHS field in the SDHCI_HOST_CONTROL2 register. The SDHCI_CTRL_UHS field will end up being set to 0 (SDR12) by sdhci_set_uhs_signaling() because there is no UHS mode being set. The fix is to change sdhci_set_uhs_signaling() to set the SDHCI_CTRL_UHS field to SDR25 (which is the same as HS) for any switch to HS mode. This was found on a new eMMC controller that does strict checking of the speed mode and the corresponding clock rate. It caused the switch to HS400 mode to fail because part of the sequence to switch to HS400 requires a switch from HS200 to HS before going to HS400. Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-06mmc: core: Fix init of SD cards reporting an invalid VDD rangeUlf Hansson
commit 72741084d903e65e121c27bd29494d941729d4a1 upstream. The OCR register defines the supported range of VDD voltages for SD cards. However, it has turned out that some SD cards reports an invalid voltage range, for example having bit7 set. When a host supports MMC_CAP2_FULL_PWR_CYCLE and some of the voltages from the invalid VDD range, this triggers the core to run a power cycle of the card to try to initialize it at the lowest common supported voltage. Obviously this fails, since the card can't support it. Let's fix this problem, by clearing invalid bits from the read OCR register for SD cards, before proceeding with the VDD voltage negotiation. Cc: stable@vger.kernel.org Reported-by: Philip Langdale <philipl@overt.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Philip Langdale <philipl@overt.org> Tested-by: Philip Langdale <philipl@overt.org> Tested-by: Manuel Presnitz <mail@mpy.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-06mmc: sdhci-of-at91: add quirk for broken HS200Eugen Hristev
commit 7871aa60ae0086fe4626abdf5ed13eeddf306c61 upstream. HS200 is not implemented in the driver, but the controller claims it through caps. Remove it via a quirk, to make sure the mmc core do not try to enable HS200, as it causes the eMMC initialization to fail. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: bb5f8ea4d514 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-11mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 supportYinbo Zhu
[ Upstream commit 05cb6b2a66fa7837211a060878e91be5eb10cb07 ] eSDHC-A001: The data timeout counter (SYSCTL[DTOCV]) is not reliable for DTOCV values 0x4(2^17 SD clock), 0x8(2^21 SD clock), and 0xC(2^25 SD clock). The data timeout counter can count from 2^13–2^27, but for values 2^17, 2^21, and 2^25, the timeout counter counts for only 2^13 SD clocks. A-008358: The data timeout counter value loaded into the timeout counter is less than expected and can result into early timeout error in case of eSDHC data transactions. The table below shows the expected vs actual timeout period for different values of SYSCTL[DTOCV]: these two erratum has the same quirk to control it, and set SDHCI_QUIRK_RESET_AFTER_REQUEST to fix above issue. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-11mmc: sdhci-of-esdhc: add erratum eSDHC5 supportYinbo Zhu
[ Upstream commit a46e42712596b51874f04c73f1cdf1017f88df52 ] Software writing to the Transfer Type configuration register (system clock domain) can cause a setup/hold violation in the CRC flops (card clock domain), which can cause write accesses to be sent with corrupt CRC values. This issue occurs only for write preceded by read. this erratum is to fix this issue. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-11mmc_spi: add a status check for spi_sync_lockedKangjie Lu
[ Upstream commit 611025983b7976df0183390a63a2166411d177f1 ] In case spi_sync_locked fails, the fix reports the error and returns the error code upstream. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-02 17:36:10 +0000