summaryrefslogtreecommitdiff
path: root/drivers/mtd/mtdoops.c
AgeCommit message (Collapse)Author
2012-01-18mtd: mtdoops: skip reading initially bad blocksRoman Tereshonkov
commit 3538c56329936c78f7d356889908790006d0124c upstream. Use block_isbad to check and skip the bad blocks reading. This will allow to get rid of the read errors if bad blocks are present initially. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-18mtdoops: fix the oops_page_used array sizeRoman Tereshonkov
commit 556f063580db2953a7e53cd46b47724246320f60 upstream. The array of unsigned long pointed by oops_page_used is allocated by vmalloc which requires the size to be in bytes. BITS_PER_LONG is equal to 32. If we want to allocate memory for 32 pages with one bit per page then 32 / BITS_PER_LONG is equal to 1 byte that is 8 bits. To fix it we need to multiply the result by sizeof(unsigned long) equal to 4. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-17Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (59 commits) mtd: mtdpart: disallow reading OOB past the end of the partition mtd: pxa3xx_nand: NULL dereference in pxa3xx_nand_probe UBI: use mtd->writebufsize to set minimal I/O unit size mtd: initialize writebufsize in the MTD object of a partition mtd: onenand: add mtd->writebufsize initialization mtd: nand: add mtd->writebufsize initialization mtd: cfi: add writebufsize initialization mtd: add writebufsize field to mtd_info struct mtd: OneNAND: OMAP2/3: prevent regulator sleeping while OneNAND is in use mtd: OneNAND: add enable / disable methods to onenand_chip mtd: m25p80: Fix JEDEC ID for AT26DF321 mtd: txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max) mtd: cfi_cmdset_0002: add support for Samsung K8D3x16UxC NOR chips mtd: cfi_cmdset_0002: add support for Samsung K8D6x16UxM NOR chips mtd: nand: ams-delta: drop omap_read/write, use ioremap mtd: m25p80: add debugging trace in sst_write mtd: nand: ams-delta: select for built-in by default mtd: OneNAND: lighten scary initial bad block messages mtd: OneNAND: OMAP2/3: add support for command line partitioning mtd: nand: rearrange ONFI revision checking, add ONFI 2.3 ... Fix up trivial conflict in drivers/mtd/Kconfig as per DavidW.
2011-01-13kmsg_dump: constrain mtdoops and ramoops to perform their actions only for ↵Seiji Aguchi
KMSG_DUMP_PANIC This series aims to develop logging facility for enterprise use. It is important to save kernel messages reliably on enterprise system because they are helpful for diagnosing system. This series add kmsg_dump() to the paths loosing kernel messages. The use case is the following. [Use case of reboot/poweroff/halt/emergency_restart] My company has often experienced the followings in our support service. - Customer's system suddenly reboots. - Customers ask us to investigate the reason of the reboot. We recognize the fact itself because boot messages remain in /var/log/messages. However, we can't investigate the reason why the system rebooted, because the last messages don't remain. And off course we can't explain the reason. We can solve above problem with this patch as follows. Case1: reboot with command - We can see "Restarting system with command:" or ""Restarting system.". Case2: halt with command - We can see "System halted.". Case3: poweroff with command - We can see " Power down.". Case4: emergency_restart with sysrq. - We can see "Sysrq:" outputted in __handle_sysrq(). Case5: emergency_restart with softdog. - We can see "Initiating system reboot" in watchdog_fire(). So, we can distinguish the reason of reboot, poweroff, halt and emergency_restart. If customer executed reboot command, you may think the customer should know the fact. However, they often claim they don't execute the command when they rebooted system by mistake. No message remains on the current Linux kernel, so we can't show the proof to the customer. This patch improves this situation. This patch: Alters mtdoops and ramoops to perform their actions only for KMSG_DUMP_PANIC, KMSG_DUMP_OOPS and KMSG_DUMP_KEXEC because they would like to log crashes only. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marco Stornelli <marco.stornelli@gmail.com> Reviewed-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-06mtd: don't use flush_scheduled_work()Tejun Heo
flush_scheduled_work() is deprecated and scheduled to be removed. Directly flush cxt->work_{erase|write} on removal instead. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-08mtd: Update copyright noticesDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2010-02-25mtd: Remove unnecessary comparisons with MAX_MTD_DEVICESBen Hutchings
MAX_MTD_DEVICES is about to be removed. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-12-31kmsg_dump: Dump on crash_kexec as wellKOSAKI Motohiro
crash_kexec gets called before kmsg_dump(KMSG_DUMP_OOPS) if panic_on_oops is set, so the kernel log buffer is not stored for this case. This patch adds a KMSG_DUMP_KEXEC dump type which gets called when crash_kexec() is invoked. To avoid getting double dumps, the old KMSG_DUMP_PANIC is moved below crash_kexec(). The mtdoops driver is modified to handle KMSG_DUMP_KEXEC in the same way as a panic. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-30mtd: mtdoops: refactor as a kmsg_dumperSimon Kagstrom
The last messages which happens before a crash might contain interesting information about the crash. This patch reworks mtdoops using the kmsg_dumper support instead of a console, which simplifies the code and also includes the messages before the oops started. On oops callbacks, the MTD device write is scheduled in a work queue (to be able to use the regular mtd->write call), while panics call mtd->panic_write directly. Thus, if panic_on_oops is set, the oops will be written out during the panic. A parameter to specify which mtd device to use (number or name), as well as a flag, writable at runtime, to toggle wheter to dump oopses or only panics (since oopses can often be handled by regular syslog). The patch was massaged and amended by Artem. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Reviewed-by: Anders Grafstrom <anders.grafstrom@netinsight.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-30mtd: mtdoops: make record size configurableSimon Kagstrom
The main justification for this is to allow catching long messages during a panic, where the top part might otherwise be lost since moving to the next block can require a flash erase. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Reviewed-by: Anders Grafstrom <anders.grafstrom@netinsight.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-30mtd: mtdoops: limit the maximum mtd partition sizeSimon Kagstrom
Make the maximum mtdoops partition size to be 8MiB. Indeed, it does not make sense to use anything larger than that anyway. This limit makes it possible to catch stupid mistakes where the user gives e.g., a rootfs partition to mtdoops (which will happily erase it). Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-30mtd: mtdoops: keep track of used/unused pages in an arraySimon Kagstrom
This patch makes mtdoops keep track of used/unused pages in an array instead of scanning the flash after a write. The advantage with this approach is that it avoids calling mtd->read on a panic, which is not possible for all mtd drivers. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Reviewed-by: Anders Grafstrom <anders.grafstrom@netinsight.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-30mtd: mtdoops: several minor cleanupsArtem Bityutskiy
While looking into the mtdoops module, I've spotted several minor imperfections. This patch addresses them. Namely: 1. Remove several trailing white-spaces and tabs 2. Check 'vmalloc()' return code straight away, not several lines below in the 'mtdoops_console_init()' function. 3. Clean up printks - make them more consistent and use the same code formatting style for them. 4. Remove silly style of putting brackets around everything in "if" operators. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20[MTD] mtdoops: fix a bit of spin lock usageAdrian Hunter
- do not leave spin lock locked - initialise spin lock Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20[MTD] mtdoops: allow MTD selection by nameAdrian Hunter
MTD's have both an index number and a name. Formerly, the MTD selected for mtdoops was done only by index number. With this patch, a name can be used instead. For example, the kernel command line: console=ttyMTD5 selects MTD 5 for mtdoops. But now this is also possible: console=ttyMTD,log which selects the MTD named "log" for mtdoops. This has the advantage that partitions can be added or removed that would affect the MTD index number but not the name, without having to then change the kernel command line. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-10[MTD] update internal API to support 64-bit device sizeAdrian Hunter
MTD internal API presently uses 32-bit values to represent device size. This patch updates them to 64-bits but leaves the external API unchanged. Extending the external API is a separate issue for several reasons. First, no one needs it at the moment. Secondly, whether the implementation is done with IOCTLs, sysfs or both is still debated. Thirdly external API changes require the internal API to be accepted first. Note that although the MTD API will be able to support 64-bit device sizes, existing drivers do not and are not required to do so, although NAND base has been updated. In general, changing from 32-bit to 64-bit values cause little or no changes to the majority of the code with the following exceptions: - printk message formats - division and modulus of 64-bit values - NAND base support - 32-bit local variables used by mtdpart and mtdconcat - naughtily assuming one structure maps to another in MEMERASE ioctl Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-18[MTD] mtdoops: Fix a bug where block may not be erasedRichard Purdie
This makes the driver erase a block when it doesn't find any existing saved log messages which is safer than assuming the flash was already erased. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-18[MTD] mtdoops: Add a magic number to logged kernel oopsRichard Purdie
Add a magic number to logged kernel oops messages so that they can be more accurately detected rather than just having to rely on the sequence number. This also allows easier detection of saved crashes by userspace. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-18[MTD] mtdoops: Fix an off by one errorRichard Purdie
Fix an off by one error in the mtdoops driver Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-04-22[MTD] mtdoops.c: make struct oops_cxt static againAdrian Bunk
struct oops_cxt needlessly became global. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-07[MTD] Fix mtdoops.c compilationDavid Woodhouse
drivers/mtd/mtdoops.c: In function ‘mtdoops_console_sync’: drivers/mtd/mtdoops.c:329: error: implicit declaration of function ‘in_interrupt’ Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-07[MTD] mtdoops: Use the panic_write function when presentRichard Purdie
When the MTD provides a panic_write function, use it. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03[MTD] mtdoops: Various minor cleanupsRichard Purdie
Various minor cleaups to mtdoops: * Don't support the mtd->erasesize < OOPS_PAGE_SIZE case * Tweak printks and make the device mtdoops connects to more visible * CON_PRINTBUFFER flag is uneeded Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03[MTD] mtdoops: Ensure sequential write to the bufferRichard Purdie
Add a spinlock to ensure writes to the mtdoops buffer memory are sequential and don't race. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03[MTD] mtdoops: Perform write operations in a workqueueRichard Purdie
Writing to the flash needs to be done in a workqueue. The console write functions may be called in any context which can lead to lockups otherwise. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03[MTD] mtdoops: Add further error return code checkingRichard Purdie
Add further error return code checks to the mtdoops driver. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03[MTD] mtdoops cleanupPeter Korsgaard
Use memcpy instead of open coding a copy loop. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-22[MTD] mtdoops printk warning fixesAndrew Morton
drivers/mtd/mtdoops.c: In function 'mtdoops_inc_counter': drivers/mtd/mtdoops.c:109: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' drivers/mtd/mtdoops.c: In function 'mtdoops_console_sync': drivers/mtd/mtdoops.c:277: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' someone buy Dave an x86_64 box. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-11[MTD] Add sync/unblank function to mtdoopsRichard Purdie
mtdoops wasn't ensuring data was flushed to flash in crash situations after recent changes in mainline kernels as tracking the oops_in_progress variable was no longer enough. We can use the "unblank" console call as a sync call to tell us to write out the buffer though. Therefore add a sync function to mtdoops and call this when console unblank events occur. Signed-off-by: Richard Purdie <rpurdie@openedhand.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-28[MTD] oops and panic message logging to MTD deviceRichard Purdie
Kernel oops and panic messages are invaluable when debugging crashes. These messages often don't make it to flash based logging methods (say a syslog on jffs2) due to the overheads involved in writing to flash. This patch allows you to turn an MTD partition into a circular log buffer where kernel oops and panic messages are written to. The messages are obtained by registering a console driver and checking oops_in_progress. Erases are performed in advance to maximise the chances of a saving messages. To activate it, add console=ttyMTDx to the kernel commandline (where x is the mtd device number to use). Signed-off-by: Richard Purdie <rpurdie@openedhand.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>