summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Expand)Author
2019-02-12MLK-18788: mtd: gpmi-nand: release HIGH_FREQ request in error pathHan Xu
2019-02-12MLK-19186: mtd: fsl-flexspi: enable flexspi octal ddr read for QXPHan Xu
2019-02-12MLK-17121: mtd: fsl-flexspi: re-init the flexspi after suspend/resumeHan Xu
2019-02-12MLK-18669-2: mtd: flexspi: enable Quad DDR read for i.MX8MM FlexSPI NorHan Xu
2019-02-12MLK-18396-2: mtd: fsl-flexspi: enable FSPI on i.MX8MMHan Xu
2019-02-12MLK-16799: mtd: flexspi: support runtime pm for flexspiHan Xu
2019-02-12MLK-16329-2: mtd: fsl-flexspi: fix the start address alignment issueHan Xu
2019-02-12MLK-16329-1: mtd: fsl-flexspi: fix the unalignment issue for fspiHan Xu
2019-02-12MLK-19185: mtd: fsl-flexspi: change the lut setting and switch to hwcapsHan Xu
2019-02-12MLK-15052-4: mtd: spi-nor: fix the micron/st issueHan Xu
2019-02-12MLK-15052-3: mtd: spi-nor: enable octal read mode in spi frameworkHan Xu
2019-02-12MLK-15052-2: mtd: flexspi-nor: support flexspi-nor driver on i.MX8Han Xu
2019-02-12MLK-18107: mtd: fsl-quadspi: add dedicate AHB read LUTHan Xu
2019-02-12MLK-18002-2: mtd: fsl-quadspi: enable ddr modeHan Xu
2019-02-12MLK-18002-1: mtd: fsl-quadspi: update the dynamic lutYogesh Gaur
2019-02-12MLK-16769-5: mtd: gpmi-nand runtime pm code changeHan Xu
2019-02-12MLK-16330: mtd: fsl-quadspi: remove unnecessary variableHan Xu
2019-02-12MLK-16243: mtd: gpmi: enable the EDO mode for i.MX8Han Xu
2019-02-12MLK-16089: mtd: gpmi-nand: calculate the correct free oob space for large oob...Han Xu
2019-02-12MLK-16060: mtd: fsl-quadspi: fix the unalignment issue for qspiHan Xu
2019-02-12MLK-15284-3: mtd: nand: gpmi-nand: support NAND on i.MX8QXPHan Xu
2019-02-12MLK-14388 mtd: gpmi: remove direct mtd->priv accessesOctavian Purdila
2019-02-12MLK-13612-3: mtd: spi-nor: add new NOR chip MX25R6435F infoHan Xu
2019-02-12MLK-12981: mtd: fsl-quadspi: QSPI support dynamic LUT changeHan Xu
2019-02-12MLK-12746-2: mtd: fsl-quadspi: add QSPI support for i.MX6ULLHan Xu
2019-02-12MLK-12684-2: mtd: gpmi: add NAND support on imx6ullHan Xu
2019-02-12MLK-12622: mtd: gpmi: fix the issue in legacy bch supportHan Xu
2019-02-12MLK-12601: mtd: gpmi: provide the option to use legacy bch geometryHan Xu
2019-02-12MLK-12449: mtd: gpmi: fix integer overflow issueHan Xu
2019-02-12MLK-12395: mtd: gpmi: add debugfs flag to indicate NAND driver use new raw ac...Han Xu
2019-02-12MLK-12394-2: mtd: gpmi: update NAND new raw page access functionsHan Xu
2019-02-12MLK-12153: mtd: fsl-quadspi: fix the QSPI dereference null return value found...Han Xu
2019-02-12MLK-11940: add two more commands support for qspiHan Xu
2019-02-12ENGR00279980 ubi: attach: do not return -EINVAL if the mtd->numeraseregions is 1Huang Shijie
2019-02-12MLK-11335: mtd: qspi: enalbe LPSR for qspiHan Xu
2019-02-12MLK-11095: mtd:qspi: clear the DDR_EN bit on 6UL and 7DHan Xu
2019-02-12MLK-9851 mtd: Change the mtd device driver build order for mfgtoolAllen Xu
2019-02-12MLK-11747: mtd: gpmi: save bch geometry setting only in initial stageHan Xu
2019-02-12MLK-11720: mtd: gpmi: change the erase threshold for mx6qp,mx6ul and mx7dHan Xu
2019-02-12MLK-11719-4: mtd: gpmi: change the BCH layout setting for large oob NANDHan Xu
2019-02-12MLK-11719-2: mtd: gpmi: save the bch layout setting in debugfsHan Xu
2019-02-12MLK-11555: mtd: nand: i.MX6UL supports bitflip detectionHan Xu
2019-02-12MLK-11336: mtd: nand: enable LPSR for GPMI NANDHan Xu
2019-02-12MLK-11236 mtd: gpmi-nand: Fix nand runtime PM issueYe.Li
2019-02-12MLK-11133: mtd:gpmi: support runtime pm for gpmi nandHan Xu
2019-02-12MLK-11044: mtd:nand: enable per1_bch for NAND on all i.MX6 platformHan Xu
2019-02-12MLK-10985: mtd: nand: support NAND on i.MX6ULHan Xu
2019-02-12MLK-10471: mtd: nand: use maximum ecc strength controller can supportHan Xu
2019-02-12MLK-10657: mtd: NAND: correct bitflip for erased NAND pageHan Xu
2019-01-09mtd: atmel-quadspi: disallow building on ebsa110Arnd Bergmann