summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/renesas
AgeCommit message (Collapse)Author
2017-12-09ravb: Remove Rx overflow log messagesKazuya Mizuguchi
[ Upstream commit 18a3ed59d09cf81a6447aadf6931bf0c9ffec5e0 ] Remove Rx overflow log messages as in an environment where logging results in network traffic logging may cause further overflows. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: reworked changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08sh_eth: use correct name for ECMR_MPDE bitNiklas Söderlund
[ Upstream commit 6dcf45e514974a1ff10755015b5e06746a033e5f ] This bit was wrongly named due to a typo, Sergei checked the SH7734/63 manuals and this bit should be named MPDE. Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-11sh_eth: R8A7740 supports packet shecksummingSergei Shtylyov
[ Upstream commit 0f1f9cbc04dbb3cc310f70a11cba0cf1f2109d9c ] The R8A7740 GEther controller supports the packet checksum offloading but the 'hw_crc' (bad name, I'll fix it) flag isn't set in the R8A7740 data, thus CSMR isn't cleared... Fixes: 73a0d907301e ("net: sh_eth: add support R8A7740") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-11sh_eth: fix EESIPR values for SH77{34|63}Sergei Shtylyov
[ Upstream commit 978d3639fd13d987950e4ce85c8737ae92154b2c ] As the SH77{34|63} manuals are freely available, I've checked the EESIPR values written against the manuals, and they appeared to set the reserved bits 11-15 (which should be 0 on write). Fix those EESIPR values. Fixes: 380af9e390ec ("net: sh_eth: CPU dependency code collect to "struct sh_eth_cpu_data"") Fixes: f5d12767c8fd ("sh_eth: get SH77{34|63} support out of #ifdef") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06sh_eth: enable RX descriptor word 0 shift on SH7734Sergei Shtylyov
[ Upstream commit 71eae1ca77fd6be218d8a952d97bba827e56516d ] The RX descriptor word 0 on SH7734 has the RFS[9:0] field in bits 16-25 (bits 0-15 usually used for that are occupied by the packet checksum). Thus we need to set the 'shift_rd0' field in the SH7734 SoC data... Fixes: f0e81fecd4f8 ("net: sh_eth: Add support SH7734") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05ravb: Fix use-after-free on `ifconfig eth0 down`Eugeniu Rosca
[ Upstream commit 79514ef670e9e575a1fe36922268c439d0f0ca8a ] Commit a47b70ea86bd ("ravb: unmap descriptors when freeing rings") has introduced the issue seen in [1] reproduced on H3ULCB board. Fix this by relocating the RX skb ringbuffer free operation, so that swiotlb page unmapping can be done first. Freeing of aligned TX buffers is not relevant to the issue seen in [1]. Still, reposition TX free calls as well, to have all kfree() operations performed consistently _after_ dma_unmap_*()/dma_free_*(). [1] Console screenshot with the problem reproduced: salvator-x login: root root@salvator-x:~# ifconfig eth0 up Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: \ attached PHY driver [Micrel KSZ9031 Gigabit PHY] \ (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=235) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready root@salvator-x:~# root@salvator-x:~# ifconfig eth0 down ================================================================== BUG: KASAN: use-after-free in swiotlb_tbl_unmap_single+0xc4/0x35c Write of size 1538 at addr ffff8006d884f780 by task ifconfig/1649 CPU: 0 PID: 1649 Comm: ifconfig Not tainted 4.12.0-rc4-00004-g112eb07287d1 #32 Hardware name: Renesas H3ULCB board based on r8a7795 (DT) Call trace: [<ffff20000808f11c>] dump_backtrace+0x0/0x3a4 [<ffff20000808f4d4>] show_stack+0x14/0x1c [<ffff20000865970c>] dump_stack+0xf8/0x150 [<ffff20000831f8b0>] print_address_description+0x7c/0x330 [<ffff200008320010>] kasan_report+0x2e0/0x2f4 [<ffff20000831eac0>] check_memory_region+0x20/0x14c [<ffff20000831f054>] memcpy+0x48/0x68 [<ffff20000869ed50>] swiotlb_tbl_unmap_single+0xc4/0x35c [<ffff20000869fcf4>] unmap_single+0x90/0xa4 [<ffff20000869fd14>] swiotlb_unmap_page+0xc/0x14 [<ffff2000080a2974>] __swiotlb_unmap_page+0xcc/0xe4 [<ffff2000088acdb8>] ravb_ring_free+0x514/0x870 [<ffff2000088b25dc>] ravb_close+0x288/0x36c [<ffff200008aaf8c4>] __dev_close_many+0x14c/0x174 [<ffff200008aaf9b4>] __dev_close+0xc8/0x144 [<ffff200008ac2100>] __dev_change_flags+0xd8/0x194 [<ffff200008ac221c>] dev_change_flags+0x60/0xb0 [<ffff200008ba2dec>] devinet_ioctl+0x484/0x9d4 [<ffff200008ba7b78>] inet_ioctl+0x190/0x194 [<ffff200008a78c44>] sock_do_ioctl+0x78/0xa8 [<ffff200008a7a128>] sock_ioctl+0x110/0x3c4 [<ffff200008365a70>] vfs_ioctl+0x90/0xa0 [<ffff200008365dbc>] do_vfs_ioctl+0x148/0xc38 [<ffff2000083668f0>] SyS_ioctl+0x44/0x74 [<ffff200008083770>] el0_svc_naked+0x24/0x28 The buggy address belongs to the page: page:ffff7e001b6213c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffff7e001b6213e0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8006d884f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff8006d884f780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8006d884f800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint root@salvator-x:~# Fixes: a47b70ea86bd ("ravb: unmap descriptors when freeing rings") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17ravb: unmap descriptors when freeing ringsKazuya Mizuguchi
[ Upstream commit a47b70ea86bdeb3091341f5ae3ef580f1a1ad822 ] "swiotlb buffer is full" errors occur after repeated initialisation of a device - f.e. suspend/resume or ip link set up/down. This is because memory mapped using dma_map_single() in ravb_ring_format() and ravb_start_xmit() is not released. Resolve this problem by unmapping descriptors when freeing rings. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: reworked] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-03sh_eth: unmap DMA buffers when freeing ringsSergei Shtylyov
[ Upstream commit 1debdc8f9ebd07daf140e417b3841596911e0066 ] The DMA API debugging (when enabled) causes: WARNING: CPU: 0 PID: 1445 at lib/dma-debug.c:519 add_dma_entry+0xe0/0x12c DMA-API: exceeded 7 overlapping mappings of cacheline 0x01b2974d to be printed after repeated initialization of the Ether device, e.g. suspend/resume or 'ifconfig' up/down. This is because DMA buffers mapped using dma_map_single() in sh_eth_ring_format() and sh_eth_start_xmit() are never unmapped. Resolve this problem by unmapping the buffers when freeing the descriptor rings; in order to do it right, we'd have to add an extra parameter to sh_eth_txfree() (we rename this function to sh_eth_tx_free(), while at it). Based on the commit a47b70ea86bd ("ravb: unmap descriptors when freeing rings"). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-04ravb: do not use zero-length alignment DMA descriptorMasaru Nagai
[ Upstream commit 8ec3e8a192ba6f13be4522ee81227c792c86fb1a ] Due to alignment requirements of the hardware transmissions are split into two DMA descriptors, a small padding descriptor of 0 - 3 bytes in length followed by a descriptor for rest of the packet. In the case of IP packets the first descriptor will never be zero due to the way that the stack aligns buffers for IP packets. However, for non-IP packets it may be zero. In that case it has been reported that timeouts occur, presumably because transmission stops at the first zero-length DMA descriptor and thus the packet is not transmitted. However, in my environment a BUG is triggered as follows: [ 20.381417] ------------[ cut here ]------------ [ 20.386054] kernel BUG at lib/swiotlb.c:495! [ 20.390324] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 20.395805] Modules linked in: [ 20.398862] CPU: 0 PID: 2089 Comm: mz Not tainted 4.10.0-rc3-00001-gf13ad2db193f #162 [ 20.406689] Hardware name: Renesas Salvator-X board based on r8a7796 (DT) [ 20.413474] task: ffff80063b1f1900 task.stack: ffff80063a71c000 [ 20.419404] PC is at swiotlb_tbl_map_single+0x178/0x2ec [ 20.424625] LR is at map_single+0x4c/0x98 [ 20.428629] pc : [<ffff00000839c4c0>] lr : [<ffff00000839c680>] pstate: 800001c5 [ 20.436019] sp : ffff80063a71f9b0 [ 20.439327] x29: ffff80063a71f9b0 x28: ffff80063a20d500 [ 20.444636] x27: ffff000008ed5000 x26: 0000000000000000 [ 20.449944] x25: 000000067abe2adc x24: 0000000000000000 [ 20.455252] x23: 0000000000200000 x22: 0000000000000001 [ 20.460559] x21: 0000000000175ffe x20: ffff80063b2a0010 [ 20.465866] x19: 0000000000000000 x18: 0000ffffcae6fb20 [ 20.471173] x17: 0000ffffa09ba018 x16: ffff0000087c8b70 [ 20.476480] x15: 0000ffffa084f588 x14: 0000ffffa09cfa14 [ 20.481787] x13: 0000ffffcae87ff0 x12: 000000000063abe2 [ 20.487098] x11: ffff000008096360 x10: ffff80063abe2adc [ 20.492407] x9 : 0000000000000000 x8 : 0000000000000000 [ 20.497718] x7 : 0000000000000000 x6 : ffff000008ed50d0 [ 20.503028] x5 : 0000000000000000 x4 : 0000000000000001 [ 20.508338] x3 : 0000000000000000 x2 : 000000067abe2adc [ 20.513648] x1 : 00000000bafff000 x0 : 0000000000000000 [ 20.518958] [ 20.520446] Process mz (pid: 2089, stack limit = 0xffff80063a71c000) [ 20.526798] Stack: (0xffff80063a71f9b0 to 0xffff80063a720000) [ 20.532543] f9a0: ffff80063a71fa30 ffff00000839c680 [ 20.540374] f9c0: ffff80063b2a0010 ffff80063b2a0010 0000000000000001 0000000000000000 [ 20.548204] f9e0: 000000000000006e ffff80063b23c000 ffff80063b23c000 0000000000000000 [ 20.556034] fa00: ffff80063b23c000 ffff80063a20d500 000000013b1f1900 0000000000000000 [ 20.563864] fa20: ffff80063ffd18e0 ffff80063b2a0010 ffff80063a71fa60 ffff00000839cd10 [ 20.571694] fa40: ffff80063b2a0010 0000000000000000 ffff80063ffd18e0 000000067abe2adc [ 20.579524] fa60: ffff80063a71fa90 ffff000008096380 ffff80063b2a0010 0000000000000000 [ 20.587353] fa80: 0000000000000000 0000000000000001 ffff80063a71fac0 ffff00000864f770 [ 20.595184] faa0: ffff80063b23caf0 0000000000000000 0000000000000000 0000000000000140 [ 20.603014] fac0: ffff80063a71fb60 ffff0000087e6498 ffff80063a20d500 ffff80063b23c000 [ 20.610843] fae0: 0000000000000000 ffff000008daeaf0 0000000000000000 ffff000008daeb00 [ 20.618673] fb00: ffff80063a71fc0c ffff000008da7000 ffff80063b23c090 ffff80063a44f000 [ 20.626503] fb20: 0000000000000000 ffff000008daeb00 ffff80063a71fc0c ffff000008da7000 [ 20.634333] fb40: ffff80063b23c090 0000000000000000 ffff800600000037 ffff0000087e63d8 [ 20.642163] fb60: ffff80063a71fbc0 ffff000008807510 ffff80063a692400 ffff80063a20d500 [ 20.649993] fb80: ffff80063a44f000 ffff80063b23c000 ffff80063a69249c 0000000000000000 [ 20.657823] fba0: 0000000000000000 ffff80063a087800 ffff80063b23c000 ffff80063a20d500 [ 20.665653] fbc0: ffff80063a71fc10 ffff0000087e67dc ffff80063a20d500 ffff80063a692400 [ 20.673483] fbe0: ffff80063b23c000 0000000000000000 ffff80063a44f000 ffff80063a69249c [ 20.681312] fc00: ffff80063a5f1a10 000000103a087800 ffff80063a71fc70 ffff0000087e6b24 [ 20.689142] fc20: ffff80063a5f1a80 ffff80063a71fde8 000000000000000f 00000000000005ea [ 20.696972] fc40: ffff80063a5f1a10 0000000000000000 000000000000000f ffff00000887fbd0 [ 20.704802] fc60: fffffff43a5f1a80 0000000000000000 ffff80063a71fc80 ffff000008880240 [ 20.712632] fc80: ffff80063a71fd90 ffff0000087c7a34 ffff80063afc7180 0000000000000000 [ 20.720462] fca0: 0000ffffcae6fe18 0000000000000014 0000000060000000 0000000000000015 [ 20.728292] fcc0: 0000000000000123 00000000000000ce ffff0000088d2000 ffff80063b1f1900 [ 20.736122] fce0: 0000000000008933 ffff000008e7cb80 ffff80063a71fd80 ffff0000087c50a4 [ 20.743951] fd00: 0000000000008933 ffff000008e7cb80 ffff000008e7cb80 000000100000000e [ 20.751781] fd20: ffff80063a71fe4c 0000ffff00000300 0000000000000123 0000000000000000 [ 20.759611] fd40: 0000000000000000 ffff80063b1f0000 000000000000000e 0000000000000300 [ 20.767441] fd60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 20.775271] fd80: 0000000000000000 0000000000000000 ffff80063a71fda0 ffff0000087c8c20 [ 20.783100] fda0: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.790930] fdc0: ffffffffffffffff 0000ffffa0903078 0000000000000000 000000001ea87232 [ 20.798760] fde0: 000000000000000f ffff80063a71fe40 ffff800600000014 ffff000000000001 [ 20.806590] fe00: 0000000000000000 0000000000000000 ffff80063a71fde8 0000000000000000 [ 20.814420] fe20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 [ 20.822249] fe40: 0000000203000011 0000000000000000 0000000000000000 ffff80063a68aa00 [ 20.830079] fe60: ffff80063a68aa00 0000000000000003 0000000000008933 ffff0000081f1b9c [ 20.837909] fe80: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.845739] fea0: ffffffffffffffff 0000ffffa07ca81c 0000000060000000 0000000000000015 [ 20.853569] fec0: 0000000000000003 000000001ea87232 000000000000000f 0000000000000000 [ 20.861399] fee0: 0000ffffcae6fe18 0000000000000014 0000000000000300 0000000000000000 [ 20.869228] ff00: 00000000000000ce 0000000000000000 00000000ffffffff 0000000000000000 [ 20.877059] ff20: 0000000000000002 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 20.884888] ff40: 0000000000000000 0000ffffa09ba018 0000ffffcae6fb20 000000001ea87010 [ 20.892718] ff60: 0000ffffa09b9000 0000ffffcae6fe30 0000ffffcae6fe18 000000000000000f [ 20.900548] ff80: 0000000000000003 000000001ea87232 0000000000000000 0000000000000000 [ 20.908378] ffa0: 0000000000000000 0000ffffcae6fdc0 0000ffffa09a7824 0000ffffcae6fdc0 [ 20.916208] ffc0: 0000ffffa0903078 0000000060000000 0000000000000003 00000000000000ce [ 20.924038] ffe0: 0000000000000000 0000000000000000 ffffffffffffffff ffffffffffffffff [ 20.931867] Call trace: [ 20.934312] Exception stack(0xffff80063a71f7e0 to 0xffff80063a71f910) [ 20.940750] f7e0: 0000000000000000 0001000000000000 ffff80063a71f9b0 ffff00000839c4c0 [ 20.948580] f800: ffff80063a71f840 ffff00000888a6e4 ffff80063a24c418 ffff80063a24c448 [ 20.956410] f820: 0000000000000000 ffff00000811cd54 ffff80063a71f860 ffff80063a24c458 [ 20.964240] f840: ffff80063a71f870 ffff00000888b258 ffff80063a24c418 0000000000000001 [ 20.972070] f860: ffff80063a71f910 ffff80063a7b7028 ffff80063a71f890 ffff0000088825e4 [ 20.979899] f880: 0000000000000000 00000000bafff000 000000067abe2adc 0000000000000000 [ 20.987729] f8a0: 0000000000000001 0000000000000000 ffff000008ed50d0 0000000000000000 [ 20.995560] f8c0: 0000000000000000 0000000000000000 ffff80063abe2adc ffff000008096360 [ 21.003390] f8e0: 000000000063abe2 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 21.011219] f900: ffff0000087c8b70 0000ffffa09ba018 [ 21.016097] [<ffff00000839c4c0>] swiotlb_tbl_map_single+0x178/0x2ec [ 21.022362] [<ffff00000839c680>] map_single+0x4c/0x98 [ 21.027411] [<ffff00000839cd10>] swiotlb_map_page+0xa4/0x138 [ 21.033072] [<ffff000008096380>] __swiotlb_map_page+0x20/0x7c [ 21.038821] [<ffff00000864f770>] ravb_start_xmit+0x174/0x668 [ 21.044484] [<ffff0000087e6498>] dev_hard_start_xmit+0x8c/0x120 [ 21.050407] [<ffff000008807510>] sch_direct_xmit+0x108/0x1a0 [ 21.056064] [<ffff0000087e67dc>] __dev_queue_xmit+0x194/0x4cc [ 21.061807] [<ffff0000087e6b24>] dev_queue_xmit+0x10/0x18 [ 21.067214] [<ffff000008880240>] packet_sendmsg+0xf40/0x1220 [ 21.072873] [<ffff0000087c7a34>] sock_sendmsg+0x18/0x2c [ 21.078097] [<ffff0000087c8c20>] SyS_sendto+0xb0/0xf0 [ 21.083150] [<ffff000008082f30>] el0_svc_naked+0x24/0x28 [ 21.088462] Code: d34bfef7 2a1803f3 1a9f86d6 35fff878 (d4210000) [ 21.094611] ---[ end trace 5bc544ad491f3814 ]--- [ 21.099234] Kernel panic - not syncing: Fatal exception in interrupt [ 21.105587] Kernel Offset: disabled [ 21.109073] Memory Limit: none [ 21.112126] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Fixes: 2f45d1902acf ("ravb: minimize TX data copying") Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02net: renesas: ravb: unintialized return valueDan Carpenter
We want to set the other "err" variable here so that we can return it later. My version of GCC misses this issue but I caught it with a static checker. Fixes: 9f70eb339f52 ("net: ethernet: renesas: ravb: fix fixed-link phydev leaks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02sh_eth: remove unchecked interrupts for RZ/A1Chris Brandt
When streaming a lot of data and the RZ/A1 can't keep up, some status bits will get set that are not being checked or cleared which cause the following messages and the Ethernet driver to stop working. This patch fixes that issue. irq 21: nobody cared (try booting with the "irqpoll" option) handlers: [<c036b71c>] sh_eth_interrupt Disabling IRQ #21 Fixes: db893473d313a4ad ("sh_eth: Add support for r7s72100") Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29net: ethernet: renesas: ravb: fix fixed-link phydev leaksJohan Hovold
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on initialisation errors and on device close after having disconnected the PHY. Fixes: b4bc88a868ed ("ravb: Add fixed-link support") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28sh_eth: add R8A7743/5 supportSergei Shtylyov
Add support for the first two members of the Renesas RZ/G family, RZ/G1M/E (also known as R8A7743/5). The Ether core is the same as in the R-Car gen2 SoCs, so will share the code/data with them... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/qlogic/qed/qed_dcbx.c drivers/net/phy/Kconfig All conflicts were cases of overlapping commits. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: ethernet: renesas: sh_eth: add POST registers for rzChris Brandt
Due to a mistake in the hardware manual, the FWSLC and POST1-4 registers were not documented and left out of the driver for RZ/A making the CAM feature non-operational. Additionally, when the offset values for POST1-4 are left blank, the driver attempts to set them using an offset of 0xFFFF which can cause a memory corruption or panic. This patch fixes the panic and properly enables CAM. Reported-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-30ravb: avoid unused function warningsArnd Bergmann
When CONFIG_PM_SLEEP is disabled, we get a couple of harmless warnings: drivers/net/ethernet/renesas/ravb_main.c:2117:12: error: 'ravb_resume' defined but not used [-Werror=unused-function] drivers/net/ethernet/renesas/ravb_main.c:2104:12: error: 'ravb_suspend' defined but not used [-Werror=unused-function] The simplest solution here is to replace the #ifdef with __maybe_unused annotations, which lets the compiler do the right thing by itself. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 0184165b2f42 ("ravb: add sleep PM suspend/resume support") Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20net: ethernet: renesas: ravb: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20net: ethernet: renesas: ravb: use phydev from struct net_devicePhilippe Reynes
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy_dev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10net: ethernet: renesas: sh_eth: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10net: ethernet: renesas: sh_eth: use phydev from struct net_devicePhilippe Reynes
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy_dev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10ravb: use proper names for suspend/resume functionsNiklas Söderlund
The patch 'ravb: add sleep PM suspend/resume support' used incorrect function names containing 'runtime' for the suspend and resume functions. Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09ravb: add sleep PM suspend/resume supportNiklas Söderlund
The interface would not function after the system had been woken up after have been suspended (echo mem > /sys/power/state) cycle. The reason for this is that all device registers have been reset to its default values. This patch adds sleep suspend and resume functions that detached the interface at suspend and restore the registers and reattach the interface at resume. Only the registers that are only configured at probe time needs to be explicitly restored by the resume handler. All other registers are reconfigured by either reopening the device in the resume handler (if the device was running when the system was suspended) or when the interface is opened by a user at a later time. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01ethernet: renesas: sh_eth: add missing of_node_put after calling ↵Peter Chen
of_parse_phandle of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01ethernet: renesas: ravb_main: add missing of_node_put after calling ↵Peter Chen
of_parse_phandle of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19sh_eth: fix DMA channel misreportingSergei Shtylyov
Currently 'ifconfig' for the Ethernet devices handled by this driver shows "DMA chan: ff" while the driver doesn't use any DMA channels. Not assigning a value to 'net_device::dma' causes 'ifconfig' to correctly not report a DMA channel. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19ravb: fix DMA channel misreportingSergei Shtylyov
Currently 'ifconfig' for the Ethernet devices handled by this driver shows "DMA chan: ff" while the driver doesn't use any DMA channels. Not assigning a value to 'net_device::dma' causes 'ifconfig' to correctly not report a DMA channel. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-01ravb: Remove manual pause frame transmitMasaru Nagai
Writing a non-zero value to the manual PAUSE frame register (MPR) starts the transmission of a PAUSE frame. A PAUSE frame is sent in ravb_emac_init(), but it is not expected behavior. Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-01ravb: Add SET_RUNTIME_PM_OPS macroKazuya Mizuguchi
Use SET_RUNTIME_PM_OPS macro instead of assigning a member of dev_pm_ops directly. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-01ravb: Add ESF in RCR for enabling separation filterMasaru Nagai
The H/W manual recommends B'10 or B'11 in a value of the separation filtering select bits in the receive configuration register (RCR.ESF). When B'10 is set, frames from non-matching streams are discarded. When B'11 is set, frames from non-matching streams are processed in reception queue 0 (best effort). This patch sets B'11 in ESF. [ykaneko0929@gmail.com: revised this commit message] Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-17ravb: Add missing free_irq() calls to ravb_close()Geert Uytterhoeven
When reopening the network device on ra7795/salvator-x, e.g. after a DHCP timeout: IP-Config: Reopening network devices... genirq: Flags mismatch irq 139. 00000000 (eth0:ch0:rx_be) vs. 00000000 (ravb e6800000.ethernet eth0: cannot request IRQ eth0:ch0:rx_be IP-Config: Failed to open eth0 IP-Config: No network devices available The "mismatch" is due to requesting an IRQ that is already in use, while IRQF_PROBE_SHARED wasn't set. However, the real cause is that ravb_close() doesn't release any of the R-Car Gen3-specific secondary IRQs. Add the missing free_irq() calls to fix this. Fixes: f51bdc236b6c5835 ("ravb: Add dma queue interrupt support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The nf_conntrack_core.c fix in 'net' is not relevant in 'net-next' because we no longer have a per-netns conntrack hash. The ip_gre.c conflict as well as the iwlwifi ones were cases of overlapping changes. Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/tx.c net/ipv4/ip_gre.c net/netfilter/nf_conntrack_core.c Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09ravb: Add missing free_irq() call to ravb_close()Geert Uytterhoeven
When reopening the network device on ra7795/salvator-x, e.g. after a DHCP timeout: IP-Config: Reopening network devices... genirq: Flags mismatch irq 139. 00000000 (eth0:ch24:emac) vs. 00000000 (eth0:ch24:emac) ravb e6800000.ethernet eth0: cannot request IRQ eth0:ch24:emac IP-Config: Failed to open eth0 IP-Config: No network devices available The "mismatch" is due to requesting an IRQ that is already in use, while IRQF_PROBE_SHARED wasn't set. However, the real cause is that ravb_close() doesn't release the R-Car Gen3-specific secondary IRQ. Add the missing free_irq() call to fix this. Fixes: 22d4df8ff3a3cc72 ("ravb: Add support for r8a7795 SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09sh_eth: reuse sh_eth_chip_reset()Sergei Shtylyov
All the chip_reset() methods repeat the code writing to the ARSTR register and delaying for 1 ms, so that we can reuse sh_eth_chip_reset() twice. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09sh_eth: call sh_eth_tsu_write() from sh_eth_chip_reset_giga()Sergei Shtylyov
sh_eth_chip_reset_giga() doesn't really need to use direct iowrite32() when writing to the ARSTR register, it can use sh_eth_tsu_write() as all other chip_reset() methods. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03ravb: Remove rx buffer ALIGNKazuya Mizuguchi
Aligning the reception data size is not required. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26sh_eth: rename ARSTR register bitSergei Shtylyov
The Renesas RZ/A1H manual names the software reset bit in the software reset register (ARSTR) ARST which makes a bit more sense than the ARSTR_ARSTR name used now by the driver -- rename the latter to ARSTR_ARST. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26sh_eth: use EDMR_SRST_GETHER in sh_eth_check_reset()Sergei Shtylyov
sh_eth_check_reset() uses a bare number where EDMR_SRST_GETHER would fit, i.e. the receive/trasmit software reset bits that comprise EDMR_SRST_GETHER read as 1 while the corresponding reset is in progress and thus, when both are 0, the reset is complete. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26sh_eth: get rid of the 2nd parameter to sh_eth_dev_init()Sergei Shtylyov
sh_eth_dev_init() is now always called with 'true' as the 2nd argument, so that there's no more sense in having 2 parameters to this function... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts were two cases of simple overlapping changes, nothing serious. In the UDP case, we need to add a hlist_add_tail_rcu() to linux/rculist.h, because we've moved UDP socket handling away from using nulls lists. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14ravb: make ravb_ptp_interrupt() *void*Sergei Shtylyov
When we have the ISS.CGIS bit set, we already know that gPTP interrupt has happened, so an extra GIS register check at the end of ravb_ptp_interrupt() seems superfluous. We can model the gPTP interrupt handler like all other dedicated interrupt handlers in the driver and make it *void*. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13net: ethernet: renesas: ravb_main: test clock rate to avoid division by 0Wolfram Sang
The clk API may return 0 on clk_get_rate, so we should check the result before using it as a divisor. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-09sh_eth: re-enable-E-MAC interrupts in sh_eth_set_ringparam()Sergei Shtylyov
The E-MAC interrupts are left disabled when the ring parameters are changed via 'ethtool'. In order to fix this, it's enough to call sh_eth_dev_init() with 'true' instead of 'false' for the second argument (which conveniently allows us to remove the following code re-enabling E-DMAC interrupts and reception). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-04ravb: Add dma queue interrupt supportKazuya Mizuguchi
This patch supports the following interrupts. - One interrupt for multiple (timestamp, error, gPTP) - One interrupt for emac - Four interrupts for dma queue (best effort rx/tx, network control rx/tx) This patch improve efficiency of the interrupt handler by adding the interrupt handler corresponding to each interrupt source described above. Additionally, it reduces the number of times of the access to EthernetAVB IF. Also this patch prevent this driver depends on the whim of a boot loader. [ykaneko0929@gmail.com: define bit names of registers] [ykaneko0929@gmail.com: add comment for gen3 only registers] [ykaneko0929@gmail.com: fix coding style] [ykaneko0929@gmail.com: update changelog] [ykaneko0929@gmail.com: gen3: fix initialization of interrupts] [ykaneko0929@gmail.com: gen3: fix clearing interrupts] [ykaneko0929@gmail.com: gen3: add helper function for request_irq()] [ykaneko0929@gmail.com: gen3: remove IRQF_SHARED flag for request_irq()] [ykaneko0929@gmail.com: revert ravb_close() and ravb_ptp_stop()] [ykaneko0929@gmail.com: avoid calling free_irq() to non-hooked interrupts] [ykaneko0929@gmail.com: make NC/BE interrupt handler a function] [ykaneko0929@gmail.com: make timestamp interrupt handler a function] [ykaneko0929@gmail.com: timestamp interrupt is handled in multiple interrupt handler instead of dma queue interrupt handler] Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-27ravb: fix software timestampingLino Sanfilippo
In ravb_start_xmit dont call skb_tx_timestamp only when hardware timestamping is requested: in the latter case software timestamps are suppressed and thus the call of skb_tx_timestamp does not have any effect. Instead call skb_tx_timestamp unconditionally in ravb_start_xmit, since the function checks itself if software timestamping is required or should be skipped due to hardware timestamping. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18ravb: fix result value overwriteYoshihiro Kaneko
The result value is overwritten by a return value of ravb_ptp_interrupt(). Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-16sh_eth: do not call netif_start_queue() from sh_eth_dev_init()Sergei Shtylyov
Iff sh_eth_phy_start() call fails in sh_eth_open(), the netif_start_queue() call done by sh_eth_dev_init() is not undone. In order to deal with that, stop calling netif_start_queue() from there, so that it can be called only when the device is fully opened and sh_eth_dev_init() only deals with the hardware initialization, symmetrically to sh_eth_dev_exit()... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14sh_eth: kill useless initializersSergei Shtylyov
Some of the local variable intializers in the driver turned out to be pointless, kill 'em. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-10sh_eth: advance 'rxdesc' later in sh_eth_ring_format()Sergei Shtylyov
Iff dma_map_single() fails, 'rxdesc' should point to the last filled RX descriptor, so that it can be marked as the last one, however the driver would have already advanced it by that time. In order to fix that, only fill an RX descriptor once all the data for it is ready. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-10sh_eth: fix NULL pointer dereference in sh_eth_ring_format()Sergei Shtylyov
In a low memory situation, if netdev_alloc_skb() fails on a first RX ring loop iteration in sh_eth_ring_format(), 'rxdesc' is still NULL. Avoid kernel oops by adding the 'rxdesc' check after the loop. Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of overlapping changes, as well as one instance (vxlan) of a bug fix in 'net' overlapping with code movement in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-30 19:16:07 +0000