summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-5000.c
AgeCommit message (Collapse)Author
2011-04-08iwlagn: sensitivity and chain noise done by driverWey-Yi Guy
_agn driver should perform both sensitivity and chain noise calib. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: remove un-needed configurationWey-Yi Guy
After driver split, set_l0s config is no longer needed, remove it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: remove un-necessary function pointerWey-Yi Guy
After driver split, no need to use function pointer for those event and register dump function. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlwifi: remove extranious macro from firmware defineroot
define of firmware filenames use extra macro to build the files name. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-07Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/rtlwifi/efuse.c drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c net/bluetooth/mgmt.c
2011-04-07iwlagn: remove ISR opsJohannes Berg
The ISR (interrupt service routine) ops are now no longer necessary since they are the same for all devices this driver now handles. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove BSM clock settingJohannes Berg
Again, a 4965 specific code path that we no longer need in iwlagn. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: change Copyright to 2011Wey-Yi Guy
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove bootstrap codeJohannes Berg
Only 4965 had a bootstrap microcode image, so the agn driver can completely ignore that and we can remove some code from it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: clean up ucode loadingJohannes Berg
All agn devices behave the same, so there's no need to go through function pointers for any of the ucode loading functionality. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: override 5300 EEPROM # of chainsJohannes Berg
At least EEPROM version 0x11A has the wrong number of chains programmed into it for some reason, so we need to override in the driver. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04Merge branch 'wireless-next-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2011-03-25iwlagn: clean up TX aggregation codeJohannes Berg
Since the driver split, there's no need for function pointers any more for aggregation queue setup and teardown as all devices now share the same code. Simplify this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-03-04Merge branch 'for-davem' of ↵David S. Miller
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-02-28iwlwifi: move check health code into iwl-rx.cStanislaw Gruszka
Remove check_plcp_health and check_ack_health ops methods, they are unneeded after iwlegacy driver split. Merge check health code into to iwl-rx.c and make functions static. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21iwlagn: Support new 5000 microcode.Fry, Donald H
New iwlwifi-5000 microcode requires driver support for API version 5. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-12-13iwlagn: code clean up to remove duplicate codeWey-Yi Guy
Multiple devices use almost the same .cfg with minor differences. Use macro and remove the duplication. By doing this, reduce the chance for mistake while modify .cfg parameters Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-12-13iwlwifi: do not reload fw if WiMAX own the RFWey-Yi Guy
For WiFi/WiMAX combo devices, if WiMAX own the RF, WiFi driver try to access RF and fail. This is the W/A to To avoid WiFi keep reloading firmware and try to access RF again. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-12-06iwlwifi: jiffies based tx queues watchdogStanislaw Gruszka
This patch replace monitor/recover timer by watchdog based on time stamp. New code allow to discover hangs more precisely. Timeout values are currently doubled monitoring period values of previous timer. This have to be tuned based of firmware timing capabilities. Tested on 3945, 4965, 5300, 6300. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-24iwlwifi: use antenna information in EEPROMWey-Yi Guy
The valid tx/rx antenna information is part of EEPROM, so use it to configure the device. For few cases, the EEPROM did not reflect the correct antenna, but it is too late to modify the EEPROM, so overwrite with .cfg parameters Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-11-16iwlagn: use SKU information in the EEPROMWey-Yi Guy
EEPROM contain the SKU information for the device, use it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-11-16iwlwifi: change default led mode for different devicesWey-Yi Guy
Set the default led mode for different devices. For the newer devices such as 6000g2a, 6000g2b and newer, the default led mode is On/Off instead of blinking. The led_mode still can be control through module parameter 0: system default 1: On/Off 2: blinking Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-11-15iwlwifi: put all the isr related function under opsWey-Yi Guy
There were two type of isr supported by iwlwifi devices. legacy isr - only used by legacy devices (3945 & 4965) ict isr - used by all new generation of iwlwifi devices Move all the isr related functions into ops, the ict type of isr supports only needed for newer devices. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15iwlagn: new RXON processing for modern devicesJohannes Berg
In order to simplify the flow, and make new enhancements easier, separate out the RXON processing for modern AGN (5000 and newer) from RXON processing for the older 3945 and 4965 devices. Avoid changing these old ones to avoid regressions and move their code to a new file (iwl-legacy.c). 4965 gets the commit_rxon that used to be common for all AGN devices, but with removed PAN support. The new RXON processing is more central and does more work in committing, so that it is easier to follow. To make it more evident what is split out for legacy, split the necessary operations for that into a new struct iwl_legacy_ops. Those parts that still exist in the new AGN code don't need to be parametrized. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15iwlwifi: make mac80211 ops a device configJohannes Berg
In the future, 4965 and modern AGN devices will need to have different mac80211 callbacks since they have different capabilities. Prepare for that by making the mac80211 operations a device config. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07iwlwifi: remove apm_ops.stopJohannes Berg
Since all devices share the same operation here, there's no need to call it indirectly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove set_pwr_src operationJohannes Berg
The set_pwr_src operation is only ever used from within the same sub-driver that it is declared in, so it can just be called directly instead of being an operation. Also, it is never called to set the power source to V_aux, so change the two functions accordingly (but keep the V_aux code for documentation purposes in a comment). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove set_ct_kill operationJohannes Berg
This operation is only ever called from set_hw_params, which is also already based on the config/ops, so that there's no need to have a separate set_ct_kill op and we can just call the right ct_threshold function. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove verify_signature eeprom operationJohannes Berg
All drivers share the same implementation, so there's no need to call this via a function pointer nor to export it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlagn: reduce redundant parameter definitionsWey-Yi Guy
move paramater definitions to a device paramater structure only leaving the device name, which antennas are used and what firmware file to use in the iwl_cfg structure. this will not completely remove the redundancies but greatly reduce them for devices that only vary by name or antennas. the parameters that are more likely to change within a given device family are left in iwl_cfg. also separate bt param structure added to help reduce more. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17iwlagn: keep track of failure tx statusWey-Yi Guy
Tx command response sent to host by uCode after completed the transmission attempt. The status parameter indicates whether the transmission was successful, or else why if failed. Here we keep the counters to help understand the different failure cases. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17iwlagn: add bt_status_read for 5150Wey-Yi Guy
Include bt_status_read function pointer for 5150 device Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: move virtual interface pointer into contextJohannes Berg
iwlwifi occasionally needs to find the virtual interface pointer to give it to mac80211, but right now it only keeps one. Move it into the context so that we can keep one pointer each. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: contextify broadcast stationJohannes Berg
The broadcast station ID is per context, so add a variable for the ID in the context and use it everywhere we previously hardcoded it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: initial contextificationJohannes Berg
In order to support multiple interfaces, we must move a lot of data into per-context structures so we can use the contexts the device offers. To start with, this makes a lot of code context-aware, more changes will move more things into the context structure. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/iwlwifi/iwl-core.h
2010-08-24iwlwifi: do not call ieee80211_frequency_to_channelShanyu Zhao
A few cases in iwlwifi driver function ieee80211_frequency_to_channel() is called to get channel number from center frequency. This is not needed since the channel number is already saved in hw_value field of struct ieee80211_channel in function iwlcore_init_geos(). So replace those function calls with hw_value field of struct ieee80211_channel. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: separate thermal throttling functionWey-Yi Guy
"Thermal Throttling" is an advance feature which only available for newer _agn devices. Move from iwl-core to iwl-agn for better code organization. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-18iwlwifi: use long monitor timer for 5300 seriesWey-Yi Guy
For 5000 series of devices, use long monitor timer to check stuck tx queues. This modification apply to all the 5000 series including 5300 and others. Cc: stable@kernel.org [2.6.35] Reported-by: drago01 <drago01@gmail.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-14iwlwifi: use long monitor timer to avoid un-necessary reloadWey-Yi Guy
For 5000 and 6000g2b series of devices, use long monitor timer to check stuck tx queues. .6000g2b series device, it is WiFi/BT combo device, there are some cases, tx queues are not move for a period of time because the WiFi/BT coex. .5000 series device, it is being reported firmware got reload more often than necessary, so extend the timer to avoid un-necessary reload. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-14iwlwifi: long monitor timerWey-Yi Guy
Change the name for monitor timer, also adding define for long monitor timer; long monitor timer can be used for the type of devices require longer time to determine the uCode is stuck on tx and needed reload. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-09iwlagn: fix rts cts protectionJohannes Berg
Currently the driver will try to protect all frames, which leads to a lot of odd things like sending an RTS with a zeroed RA before multicast frames, which is clearly bogus. In order to fix all of this, we need to take a step back and see what we need to achieve: * we need RTS/CTS protection if requested by the AP for the BSS, mac80211 tells us this * in that case, CTS-to-self should only be enabled when mac80211 tells us * additionally, as a hardware workaround, on some devices we have to protect aggregated frames with RTS To achieve the first two items, set up the RXON accordingly and set the protection required flag in the transmit command when mac80211 requests protection for the frame. To achieve the last item, set the rate-control RTS-requested flag for all stations that we have aggregation sessions with, and set the protection required flag when sending aggregated frames (on those devices where this is required). Since otherwise bugs can occur, do not allow the user to override the RTS-for-aggregation setting from sysfs any more. Finally, also clean up the way all these flags get set in the driver and move everything into the device-specific functions. Cc: stable@kernel.org [2.6.35] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-23iwlagn: add bluetooth stats to debugfsWey-Yi Guy
For WiFi/BT combo devices, add bluetooth statistics counter read function to debugfs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: add statistic notification structure for WiFi/BT devicesWey-Yi Guy
If its WiFi/BT combo device, the statistics notification sent by uCode will include the additional BT related statistics counters. Adding new data structure to support the new layout. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-02iwlwifi: generic parameter define for _agn deviceWey-Yi Guy
Code clean up to change name from having 5000 as part of name which easy to confuse and think it is for 5000 series devices to more generic _agn name since it is being used by multiple _agn devices. No functional changes. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-07-02iwlwifi: add support for device tx flush requestWey-Yi Guy
"Flush" request can come from two different sources, it can either from mac80211, or from device when the operation is needed. Here adding the support for device issue "flush" request. When receive tx complete with status is TX_STATUS_FAIL_RFKILL_FLUSH, issue REPLY_TXFIFO_FLUSH command to uCode to flush out all the tx frames in queues. In this condition, since mac80211 has no knowledge of "flush" operation, driver need to stop all the tx queues and wait for the operation completed before wake up the queues for frames transmission. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-07-02iwlwifi: add mac80211 flush callback supportWey-Yi Guy
Adding flush callback support in the driver. Two type of flush can be issued by mac80211: 1. drop = true: frame drop is ok, issue REPLY_TXFIFO_FLUSH host command to uCode to drop all the frames in tx fifo queues; then return the control back to mac80211 2. drop = false: wait for either all the frames in tx fifo queues been transmitted, or timeout; then return the control back to mac80211 If the flush request coming from mac80211, mac80211 will make sure there are no additional frames push down to driver before flush operation is completed. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-06-25iwlwifi: update LQ for bcast station on channel changeDaniel Halperin
The rate table in the bcast LQ is computed only when the station is allocated, and chooses the lowest rate for the band. Because of when this occurs, this is the 2.4 GHz band and uses the 0x420a (CCK, 1 Mbps) rate. In 5 GHz beaconing mode, this rate will prevent beacons from being sent and any other packets from being received. We can fix this by re-initializing the bcast station's LQ command when the channel is changed. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-06-25iwlwifi: enable DC calibration based on config parameterWey-Yi Guy
Different devices have different calibration requirement, some need DC calibration and some don't; make it a cfg parameter for easy management. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-06-21iwlwifi: move _agn statistics related structureWey-Yi Guy
agn and 3945 has different statistics_notif data structure; since 3945 has it statistics_notif data structure inside the _3945 portion of iwl_priv, it make sense to move the agn statistics_notif into _agn portion. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-13 16:08:28 +0000