summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi
AgeCommit message (Collapse)Author
2011-07-21treewide: fix potentially dangerous trailing ';' in #defined values/expressionsPhil Carmody
All these are instances of #define NAME value; or #define NAME(params_opt) value; These of course fail to build when used in contexts like if(foo $OP NAME) while(bar $OP NAME) and may silently generate the wrong code in contexts such as foo = NAME + 1; /* foo = value; + 1; */ bar = NAME - 1; /* bar = value; - 1; */ baz = NAME & quux; /* baz = value; & quux; */ Reported on comp.lang.c, Message-ID: <ab0d55fe-25e5-482b-811e-c475aa6065c3@c29g2000yqd.googlegroups.com> Initial analysis of the dangers provided by Keith Thompson in that thread. There are many more instances of more complicated macros having unnecessary trailing semicolons, but this pile seems to be all of the cases of simple values suffering from the problem. (Thus things that are likely to be found in one of the contexts above, more complicated ones aren't.) Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-28iwlagn: use PCI_DMA_* for pci_* operationsJohn W. Linville
"iwlagn: map command buffers BIDI" uses the DMA_* enumerations for DMA directions, even though the pci_* DMA API is still in use. That patch was undoubtedly developed on top of "iwlagn: don't use the PCI wrappers for DMA operation", which is due in the next release. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27iwlagn: fix *_UCODE_API_MAX output in the firmware fieldEvgeni Golov
Currently (3.0-rc2), modinfo iwlagn shows: firmware: iwlwifi-5150-IWL5150_UCODE_API_MAX.ucode firmware: iwlwifi-5000-IWL5000_UCODE_API_MAX.ucode firmware: iwlwifi-6000g2b-IWL6000G2_UCODE_API_MAX.ucode firmware: iwlwifi-6000g2a-IWL6000G2_UCODE_API_MAX.ucode firmware: iwlwifi-6050-IWL6050_UCODE_API_MAX.ucode firmware: iwlwifi-6000-IWL6000_UCODE_API_MAX.ucode firmware: iwlwifi-100-IWL100_UCODE_API_MAX.ucode firmware: iwlwifi-1000-IWL1000_UCODE_API_MAX.ucode firmware: iwlwifi-105-IWL105_UCODE_API_MAX.ucode firmware: iwlwifi-2030-IWL2030_UCODE_API_MAX.ucode firmware: iwlwifi-2000-IWL2000_UCODE_API_MAX.ucode which is obviously wrong, the user should not see the *_UCODE_API_MAX macros but the actual ucode API versions here. The problem are the #define *_MODULE_FIRMWARE(api) *_FW_PRE #api ".ucode" which do not expand api correctly (because this is a macro itself). Fixed by using __stringify() from linux/stringify.h. Further information about macro stringification can be found here: http://gcc.gnu.org/onlinedocs/cpp/Stringification.html Signed-off-by: Evgeni Golov <sargentd@die-welt.net> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27iwlagn: map command buffers BIDIJohannes Berg
Evidently, the device sometimes wants to write back to command buffers, even if I see no reason why it should. Allow it to do that. Tested-by: Andy Lutomirski <luto@mit.edu> Tested-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-27iwlagn: fix cmd queue unmapJohannes Berg
When we stop the device while a command is in flight that uses multiple TBs, we can leak the DMA buffers for the second and higher TBs. Fix this by using iwlagn_unmap_tfd() as we do when we normally recover the entry. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-24iwlagn: fix change_interface for P2P typesJohannes Berg
When an interface changes type to a P2P type, iwlagn will erroneously set vif->type to the P2P type and not the reduced/split type. Fix this by keeping "newtype" in another variable for the assignment to vif->type. Cc: stable@kernel.org [2.6.38+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-24iwlagn: Fix a bug introduced by the HUGE command removalEmmanuel Grumbach
Since we don't have HUGE command any more, there is no point in adding 1 to the num of slots in the command queue. Doing so is buggy and might corrupt memory. Bug introduced by 4ce7cc2b09553a91d4aea014c39674685715173a iwlagn: support multiple TBs per command Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-08iwlagn: send tx power command if defer cause by RXON not matchWey-Yi Guy
During channge channel, tx power will not send to uCode, the tx power command should send after scan complete. but should also can send after RXON command. Stable fix identified by Stanislaw Gruszka <sgruszka@redhat.com>. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Cc: stable@kernel.org [2.6.38+] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-06iwlagn: use cts-to-self protection on 5000 adapters seriesStanislaw Gruszka
This patch fixes 802.11n stability and performance regression we have since 2.6.35. It boost performance on my 5GHz N-only network from about 5MB/s to 8MB/s. Similar percentage boost can be observed on 2.4 GHz. These are test results of 5x downloading of approximately 700MB iso image: vanilla: 5.27 5.22 4.94 4.47 5.31 ; avr 5.0420 std 0.35110 patched: 8.07 7.95 8.06 7.99 7.96 ; avr 8.0060 std 0.055946 This was achieved with NetworkManager configured to do not perform periodical scans, by configuring constant BSSID. With periodical scans, after some time, performance downgrade to unpatched driver level, like in example below: patched: 7.40 7.61 4.28 4.37 4.80 avr 5.6920 std 1.6683 However patch still make better here, since similar test on unpatched driver make link disconnects with below messages after some time: wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticate with 00:23:69:35:d1:3f (try 2) wlan1: authenticate with 00:23:69:35:d1:3f (try 3) wlan1: authentication with 00:23:69:35:d1:3f timed out On 2.6.35 kernel patch helps against connection hangs with messages: iwlagn 0000:20:00.0: queue 10 stuck 3 time. Fw reload. iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03iwlagn: fix channel switch lockingStanislaw Gruszka
We use priv->mutex to avoid race conditions between iwl_chswitch_done() and iwlagn_mac_channel_switch(), when marking channel switch in progress. But iwl_chswitch_done() can be called in atomic context from iwl_rx_csa() or with mutex already taken from iwlagn_commit_rxon(). These bugs were introduced by: commit 79d07325502e73508f917475bc1617b60979dd94 Author: Wey-Yi Guy <wey-yi.w.guy@intel.com> Date: Thu May 6 08:54:11 2010 -0700 iwlwifi: support channel switch offload in driver To fix remove mutex from iwl_chswitch_done() and use atomic bitops for marking channel switch pending. Also remove iwl2030_hw_channel_switch() since 2000 series adapters are 2.4GHz only devices. Cc: stable@kernel.org # 2.6.36+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-31iwlagn: fix incorrect PCI subsystem id for 6150 devicesWey-Yi Guy
For 6150 devices, modify the supported PCI subsystem ID. Cc: stable@kernel.org Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-25Merge branch 'for-davem' of ↵David S. Miller
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-05-24Merge ↵John W. Linville
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-05-24iwlagn: dbg_fixed_rate only used when CONFIG_MAC80211_DEBUGFS enabledWey-Yi Guy
Fix compiling error when CONFIG_MAC80211_DEBUGFS is not enabled drivers/net/wireless/iwlwifi/iwl-agn-rs.c:351: error: 'struct iwl_lq_sta' has no member named 'dbg_fixed_rate' drivers/net/wireless/iwlwifi/iwl-agn-rs.c:1076: error: 'struct iwl_lq_sta' has no member named 'dbg_fixed_rate' Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) b43: fix comment typo reqest -> request Haavard Skinnemoen has left Atmel cris: typo in mach-fs Makefile Kconfig: fix copy/paste-ism for dell-wmi-aio driver doc: timers-howto: fix a typo ("unsgined") perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course'). treewide: fix a few typos in comments regulator: change debug statement be consistent with the style of the rest Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations" audit: acquire creds selectively to reduce atomic op overhead rtlwifi: don't touch with treewide double semicolon removal treewide: cleanup continuations and remove logging message whitespace ath9k_hw: don't touch with treewide double semicolon removal include/linux/leds-regulator.h: fix syntax in example code tty: fix typo in descripton of tty_termios_encode_baud_rate xtensa: remove obsolete BKL kernel option from defconfig m68k: fix comment typo 'occcured' arch:Kconfig.locks Remove unused config option. treewide: remove extra semicolons ...
2011-05-19iwlwifi: remove unused parameter from iwl_hcmd_queue_reclaimDaniel Halperin
cmd_index is never used. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
2011-05-16Merge branch 'wireless-next-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2011-05-16iwlwifi: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warningStephen Boyd
Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following warning: In file included from arch/x86/include/asm/uaccess.h:573, from include/net/checksum.h:25, from include/linux/skbuff.h:28, from drivers/net/wireless/iwlwifi/iwl-agn-rs.c:28: In function 'copy_from_user', inlined from 'rs_sta_dbgfs_scale_table_write' at drivers/net/wireless/iwlwifi/iwl-agn-rs.c:3099: arch/x86/include/asm/uaccess_64.h:65: warning: call to 'copy_from_user_overflow' declared with attribute warning: copy_from_user() buffer size is not provably correct presumably due to buf_size being signed causing GCC to fail to see that buf_size can't become negative. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13iwlagn: remove unused old_assoc parameterWey-Yi Guy
old_assoc not used, remove it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: change default beacon intervalJohannes Berg
When the PAN context is active, but unused, it may still block scans that take more dwell time than its beacon interval (which is odd). Work around this problem by using a default beacon interval of 200 so scans will fit between. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: remove set but unused varsJohannes Berg
gcc is warning that a few variables in rate scaling are set but never otherwise used. This pointed out a few simplifications. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: alwasy send RXON with disassociate falge before associateWey-Yi Guy
Before send the RXON command with associated flag set, always do disassociate first to make sure uCode is in the correct state. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: clear STATUS_HCMD_ACTIVE bit if fail enqueueWey-Yi Guy
If fail to enqueue host command, clear the STATUS_hcmD_ACTIVE bit Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: add testmode set fixed rate commandWey-Yi Guy
Add support in testmode for setting fixed rate Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: add eeprom command to testmodeWey-Yi Guy
Add the capability to dump eeprom through testmode request Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: add testmode trace commandWey-Yi Guy
Adding testmode trace/debug capability Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: more ucode error log infoWey-Yi Guy
No functional changes, just logging more information when uCode crash, also change change the format. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: support multiple TBs per commandJohannes Berg
The current "huge" command handling is a bit confusing, and very limited since only one command may be huge at a time. Additionally, we often copy data around quite pointlessly since we could instead map the existing scan buffer for example and use it directly. This patch makes that possible. The first change is that multiple buffers may be given to each command (this change was prepared earlier so callsites don't need to change). Each of those can be mapped attached to a TB in the TFD, and the command header can use a TB (the first one) in the TFD as well. Doing this allows getting rid of huge commands in favour of mapping existing buffers. The beacon transmission is also optimised to not copy the SKB at all but use multiple TBs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: remove unused pad argumentJohannes Berg
The pad argument to iwlagn_txq_free_tfd isn't used, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: clean up TXQ indirectionJohannes Berg
All of these functions no longer need to be accessed indirectly since they're shared in all AGN devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13iwlagn: prepare for multi-TB commandsJohannes Berg
In a subsequent patch, I want to make commands use multiple TBs in a TFD. This is a simple change to prepare the data structures for this, with as of now still just a single TB supported. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-10iwlagn: fix iwl_is_any_associatedJohannes Berg
The function iwl_is_any_associated() was intended to check both contexts, but due to an oversight it only checks the BSS context. This leads to a problem with scanning since the passive dwell time isn't restricted appropriately and a scan that includes passive channels will never finish if only the PAN context is associated since the default dwell time of 120ms won't fit into the normal 100 TU DTIM interval. Fix the function by using for_each_context() and also reorganise the other functions a bit to take advantage of each other making the code easier to read. Cc: stable@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10iwlagn: led stay solid on when no trafficWey-Yi Guy
commit 5ed540aecc2aae92d5c97b9a9306a5bf88ad5574 change the led behavior for iwlwifi driver; the side effect cause led blink all the time. Modify the led blink table to fix this problem Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-06iwlagn: check DMA mapping errorsJohannes Berg
DMA mappings can fail, but the current code doesn't check for that. Add checking, which requires some restructuring for proper error paths. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06iwlagn: remove bytecount indirectionJohannes Berg
All AGN devices need the bytecount table, so remove the indirection and make the functions static again. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06iwlagn: dont update bytecount table for command queueJohannes Berg
The device doesn't use the bytecount table for the command queue, only for aggregation queues to make aggregation decisions. So don't update it for the command queue (and we even updated it with wrong values). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06iwlagn: remove unused variableJohannes Berg
The variable 'len' here is set but never used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06iwlagn: remove frame pre-allocationJohannes Berg
The frame pre-allocation is quite a bit of complex code, all to avoid a single allocation. Remove it and consolidate the beacon sending code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06iwlagn: remove get_hcmd_size indirectionJohannes Berg
There's no need for this, all commands are the right size. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06iwlwifi: support the svtool messages interactions through nl80211 test modeCindy H. Kao
This patch adds the feature to support the test mode operation through the generic netlink channel NL80211_CMD_TESTMODE between intel wireless device iwlwifi and the user space application svtool. The main purpose is to create a transportation layer between the iwlwifi device and the user space application so that the interaction between the user space application svtool and the iwlwifi device in the kernel space is in a way of generic netlink messaging. The detail specific functions are: 1. The function iwl_testmode_cmd() is added to digest the svtool test command from the user space application. The svtool test commands are categorized to three types : commands to be processed by the device ucode, commands to access the registers, and commands to be processed at the driver level(such as reload the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers and reply to user space regarding the command execution status. Extra data is returned to the user space application if there's any. 2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous messages from the iwlwifi device to the user space. Regardless the message types, whenever there is a valid spontaneous message received by the iwlwifi ISR, iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user space. The message content is not attacked and the message parsing is left to the user space application. Implementation guidelines: 1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE channel, therefore, the codes need to follow the regulations set by cfg80211.ko to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi device is indicated with ieee80211_ops and can be actually accessed. Therefore, a callback iwl_testmode_cmd() is added to the structure iwlagn_hw_ops in iwl-agn.c. 2. It intends to utilize those low level device access APIs from iwlwifi device driver (ie. iwlagn.ko) rather than creating it's own set of device access functions. For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused. 3. The main functions are maintained in new files instead of spreading all over the existing iwlwifi driver files. The new files added are : drivers/net/wireless/iwlwifi/iwl-sv-open.c - to handle the user space test mode application command and reply the respective command status to the user space application. - to multicast the spontaneous messages from device to user space. drivers/net/wireless/iwlwifi/iwl-testmode.h - the commonly referenced definitions for the TLVs used in the generic netlink messages Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/tg3.c
2011-05-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_cs.c drivers/net/wireless/rtlwifi/pci.c net/bluetooth/l2cap_sock.c
2011-05-02Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-04-30iwlagn: remove un-necessary debugfs callbackWey-Yi Guy
After driver split, no need for debugfs callback, remove those Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-30iwlagn: prefer BSS contextJohannes Berg
If an interface type changes from a type that is only supported on the PAN context (e.g. P2P GO) to a type that is supported on the BSS context, and the BSS context is not in use, then we need to use the BSS context instead of changing the device type within the context. To achieve this, refuse the type change, which causes a down/up cycle that will allocate the BSS context for the interface. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-30iwlagn: improve RXON checkingJohannes Berg
The current RXON checking doesn't verify that the channel is valid (or at least non-zero), so add that. Also, add a WARN() so we get a stacktrace, and capture a bitmask of errors in order to capture all necessary information in the warning itself (in case the previous messages are snipped off.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-30iwlagn: remove spectrum measurement headerJohannes Berg
This header file isn't used, and if we ever need these definitions they shouldn't be added to a driver but rather to the common 802.11 include file that has all frame definitions. Thus, just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-30iwlagn: semaphore and calib cleanupDon Fry
All agn devices use the same eeprom semaphore and calib version routines. Delete the indirection and move the semaphore routines to where they are used and make static. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-30iwlagn: mod param cleanupDon Fry
All agn devices use the same module parameter structure. Delete the indirection and access the structure diretly. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-02 01:37:53 +0000