summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/marvell
AgeCommit message (Collapse)Author
2019-12-05mwifiex: debugfs: correct histogram spacing, formattingBrian Norris
[ Upstream commit 4cb777c64e030778c569f605398d7604d8aabc0f ] Currently, snippets of this file look like: rx rates (in Mbps): 0=1M 1=2M2=5.5M 3=11M 4=6M 5=9M 6=12M 7=18M 8=24M 9=36M 10=48M 11=54M12-27=MCS0-15(BW20) 28-43=MCS0-15(BW40) 44-53=MCS0-9(VHT:BW20)54-63=MCS0-9(VHT:BW40)64-73=MCS0-9(VHT:BW80) ... noise_flr[--96dBm] = 22 noise_flr[--95dBm] = 149 noise_flr[--94dBm] = 9 noise_flr[--93dBm] = 2 We're missing some spaces, and we're adding a minus sign ('-') on values that are already negative signed integers. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05mwifiex: fix potential NULL dereference and use after freePan Bian
[ Upstream commit 1dcd9429212b98bea87fc6ec92fb50bf5953eb47 ] There are two defects: (1) passing a NULL bss to mwifiex_save_hidden_ssid_channels will result in NULL dereference, (2) using bss after dropping the reference to it via cfg80211_put_bss. To fix them, the patch moves the buggy code to the branch that bss is not NULL and puts it before cfg80211_put_bss. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01mwifiex: Fix NL80211_TX_POWER_LIMITEDAdrian Bunk
[ Upstream commit 65a576e27309120e0621f54d5c81eb9128bd56be ] NL80211_TX_POWER_LIMITED was treated as NL80211_TX_POWER_AUTOMATIC, which is the opposite of what should happen and can cause nasty regulatory problems. if/else converted to a switch without default to make gcc warn on unhandled enum values. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-05libertas: Add missing sentinel at end of if_usb.c fw_tableKevin Easton
[ Upstream commit 764f3f1ecffc434096e0a2b02f1a6cc964a89df6 ] This sentinel tells the firmware loading process when to stop. Reported-and-tested-by: syzbot+98156c174c5a2cad9f8f@syzkaller.appspotmail.com Signed-off-by: Kevin Easton <kevin@guarana.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21mwifiex: Fix three heap overflow at parsing element in cfg80211_ap_settingsWen Huang
commit 7caac62ed598a196d6ddf8d9c121e12e082cac3a upstream. mwifiex_update_vs_ie(),mwifiex_set_uap_rates() and mwifiex_set_wmm_params() call memcpy() without checking the destination size.Since the source is given from user-space, this may trigger a heap buffer overflow. Fix them by putting the length check before performing memcpy(). This fix addresses CVE-2019-14814,CVE-2019-14815,CVE-2019-14816. Signed-off-by: Wen Huang <huangwenabc@gmail.com> Acked-by: Ganapathi Bhat <gbhat@marvell.comg> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16mwifiex: fix 802.11n/WPA detectionBrian Norris
commit df612421fe2566654047769c6852ffae1a31df16 upstream. Commit 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs") adjusted the ieee_types_vendor_header struct, which inadvertently messed up the offsets used in mwifiex_is_wpa_oui_present(). Add that offset back in, mirroring mwifiex_is_rsn_oui_present(). As it stands, commit 63d7ef36103d breaks compatibility with WPA (not WPA2) 802.11n networks, since we hit the "info: Disable 11n if AES is not supported by AP" case in mwifiex_is_network_compatible(). Fixes: 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21mwifiex: Don't abort on small, spec-compliant vendor IEsBrian Norris
commit 63d7ef36103d26f20325a921ecc96a3288560146 upstream. Per the 802.11 specification, vendor IEs are (at minimum) only required to contain an OUI. A type field is also included in ieee80211.h (struct ieee80211_vendor_ie) but doesn't appear in the specification. The remaining fields (subtype, version) are a convention used in WMM headers. Thus, we should not reject vendor-specific IEs that have only the minimum length (3 bytes) -- we should skip over them (since we only want to match longer IEs, that match either WMM or WPA formats). We can reject elements that don't have the minimum-required 3 byte OUI. While we're at it, move the non-standard subtype and version fields into the WMM structs, to avoid this confusion in the future about generic "vendor header" attributes. Fixes: 685c9b7750bf ("mwifiex: Abort at too short BSS descriptor element") Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies()Takashi Iwai
commit 69ae4f6aac1578575126319d3f55550e7e440449 upstream. A few places in mwifiex_uap_parse_tail_ies() perform memcpy() unconditionally, which may lead to either buffer overflow or read over boundary. This patch addresses the issues by checking the read size and the destination size at each place more properly. Along with the fixes, the patch cleans up the code slightly by introducing a temporary variable for the token size, and unifies the error path with the standard goto statement. Reported-by: huangwen <huangwen@venustech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21mwifiex: Abort at too short BSS descriptor elementTakashi Iwai
commit 685c9b7750bfacd6fc1db50d86579980593b7869 upstream. Currently mwifiex_update_bss_desc_with_ie() implicitly assumes that the source descriptor entries contain the enough size for each type and performs copying without checking the source size. This may lead to read over boundary. Fix this by putting the source size check in appropriate places. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21mwifiex: Fix possible buffer overflows at parsing bss descriptorTakashi Iwai
[ Upstream commit 13ec7f10b87f5fc04c4ccbd491c94c7980236a74 ] mwifiex_update_bss_desc_with_ie() calls memcpy() unconditionally in a couple places without checking the destination size. Since the source is given from user-space, this may trigger a heap buffer overflow. Fix it by putting the length check before performing memcpy(). This fix addresses CVE-2019-3846. Reported-by: huangwen <huangwen@venustech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31mwifiex: Fix mem leak in mwifiex_tm_cmdYueHaibing
[ Upstream commit 003b686ace820ce2d635a83f10f2d7f9c147dabc ] 'hostcmd' is alloced by kzalloc, should be freed before leaving from the error handling cases, otherwise it will cause mem leak. Fixes: 3935ccc14d2c ("mwifiex: add cfg80211 testmode support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31mwifiex: prevent an array overflowDan Carpenter
[ Upstream commit b4c35c17227fe437ded17ce683a6927845f8c4a4 ] The "rate_index" is only used as an index into the phist_data->rx_rate[] array in the mwifiex_hist_data_set() function. That array has MWIFIEX_MAX_AC_RX_RATES (74) elements and it's used to generate some debugfs information. The "rate_index" variable comes from the network skb->data[] and it is a u8 so it's in the 0-255 range. We need to cap it to prevent an array overflow. Fixes: cbf6e05527a7 ("mwifiex: add rx histogram statistics support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16mwl8k: Fix rate_idx underflowPetr Štetiar
commit 6b583201fa219b7b1b6aebd8966c8fd9357ef9f4 upstream. It was reported on OpenWrt bug tracking system[1], that several users are affected by the endless reboot of their routers if they configure 5GHz interface with channel 44 or 48. The reboot loop is caused by the following excessive number of WARN_ON messages: WARNING: CPU: 0 PID: 0 at backports-4.19.23-1/net/mac80211/rx.c:4516 ieee80211_rx_napi+0x1fc/0xa54 [mac80211] as the messages are being correctly emitted by the following guard: case RX_ENC_LEGACY: if (WARN_ON(status->rate_idx >= sband->n_bitrates)) as the rate_idx is in this case erroneously set to 251 (0xfb). This fix simply converts previously used magic number to proper constant and guards against substraction which is leading to the currently observed underflow. 1. https://bugs.openwrt.org/index.php?do=details&task_id=2218 Fixes: 854783444bab ("mwl8k: properly set receive status rate index on 5 GHz receive") Cc: <stable@vger.kernel.org> Tested-by: Eubert Bao <bunnier@gmail.com> Reported-by: Eubert Bao <bunnier@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23libertas_tf: don't set URB_ZERO_PACKET on IN USB transferLubomir Rintel
commit 607076a904c435f2677fadaadd4af546279db68b upstream. It doesn't make sense and the USB core warns on each submit of such URB, easily flooding the message buffer with tracebacks. Analogous issue was fixed in regular libertas driver in commit 6528d8804780 ("libertas: don't set URB_ZERO_PACKET on IN USB transfer"). Cc: stable@vger.kernel.org Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Steve deRosier <derosier@cal-sierra.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13libertas: don't set URB_ZERO_PACKET on IN USB transferLubomir Rintel
commit 6528d88047801b80d2a5370ad46fb6eff2f509e0 upstream. The USB core gets rightfully upset: usb 1-1: BOGUS urb flags, 240 --> 200 WARNING: CPU: 0 PID: 60 at drivers/usb/core/urb.c:503 usb_submit_urb+0x2f8/0x3ed Modules linked in: CPU: 0 PID: 60 Comm: kworker/0:3 Not tainted 4.19.0-rc6-00319-g5206d00a45c7 #39 Hardware name: OLPC XO/XO, BIOS OLPC Ver 1.00.01 06/11/2014 Workqueue: events request_firmware_work_func EIP: usb_submit_urb+0x2f8/0x3ed Code: 75 06 8b 8f 80 00 00 00 8d 47 78 89 4d e4 89 55 e8 e8 35 1c f6 ff 8b 55 e8 56 52 8b 4d e4 51 50 68 e3 ce c7 c0 e8 ed 18 c6 ff <0f> 0b 83 c4 14 80 7d ef 01 74 0a 80 7d ef 03 0f 85 b8 00 00 00 8b EAX: 00000025 EBX: ce7d4980 ECX: 00000000 EDX: 00000001 ESI: 00000200 EDI: ce7d8800 EBP: ce7f5ea8 ESP: ce7f5e70 DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 EFLAGS: 00210292 CR0: 80050033 CR2: 00000000 CR3: 00e80000 CR4: 00000090 Call Trace: ? if_usb_fw_timeo+0x64/0x64 __if_usb_submit_rx_urb+0x85/0xe6 ? if_usb_fw_timeo+0x64/0x64 if_usb_submit_rx_urb_fwload+0xd/0xf if_usb_prog_firmware+0xc0/0x3db ? _request_firmware+0x54/0x47b ? _request_firmware+0x89/0x47b ? if_usb_probe+0x412/0x412 lbs_fw_loaded+0x55/0xa6 ? debug_smp_processor_id+0x12/0x14 helper_firmware_cb+0x3c/0x3f request_firmware_work_func+0x37/0x6f process_one_work+0x164/0x25a worker_thread+0x1c4/0x284 kthread+0xec/0xf1 ? cancel_delayed_work_sync+0xf/0xf ? kthread_create_on_node+0x1a/0x1a ret_from_fork+0x2e/0x38 ---[ end trace 3ef1e3b2dd53852f ]--- Cc: stable@vger.kernel.org Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-04libertas: call into generic suspend code before turning off powerDaniel Mack
[ Upstream commit 4f666675cdff0b986195413215eb062b7da6586f ] When powering down a SDIO connected card during suspend, make sure to call into the generic lbs_suspend() function before pulling the plug. This will make sure the card is successfully deregistered from the system to avoid communication to the card starving out. Fixes: 7444a8092906 ("libertas: fix suspend and resume for SDIO connected cards") Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-09-09libertas: fix suspend and resume for SDIO connected cardsDaniel Mack
commit 7444a8092906ed44c09459780c56ba57043e39b1 upstream. Prior to commit 573185cc7e64 ("mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus"), the MMC core used to call into the power management functions of SDIO clients itself and removed the card if the return code was non-zero. IOW, the mmc handled errors gracefully and didn't upchain them to the pm core. Since this change, the mmc core relies on generic power management functions which treat all errors as a reason to cancel the suspend immediately. This causes suspend attempts to fail when the libertas driver is loaded. To fix this, power down the card explicitly in if_sdio_suspend() when we know we're about to lose power and return success. Also set a flag in these cases, and power up the card again in if_sdio_resume(). Fixes: 573185cc7e64 ("mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus") Cc: <stable@vger.kernel.org> Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Chris Ball <chris@printf.net> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-03mwifiex: correct histogram data with appropriate indexXinming Hu
[ Upstream commit 30bfce0b63fa68c14ae1613eb9d259fa18644074 ] Correct snr/nr/rssi data index to avoid possible buffer underflow. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-03mwifiex: handle race during mwifiex_usb_disconnectGanapathi Bhat
[ Upstream commit b817047ae70c0bd67b677b65d0d69d72cd6e9728 ] Race condition is observed during rmmod of mwifiex_usb: 1. The rmmod thread will call mwifiex_usb_disconnect(), download SHUTDOWN command and do wait_event_interruptible_timeout(), waiting for response. 2. The main thread will handle the response and will do a wake_up_interruptible(), unblocking rmmod thread. 3. On getting unblocked, rmmod thread will make rx_cmd.urb = NULL in mwifiex_usb_free(). 4. The main thread will try to resubmit rx_cmd.urb in mwifiex_usb_submit_rx_urb(), which is NULL. To fix, wait for main thread to complete before calling mwifiex_usb_free(). Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19mwifiex: cfg80211: do not change virtual interface during scan processingLimin Zhu
[ Upstream commit c61cfe49f0f0f0d1f8b56d0b045838d597e8c3a3 ] (1) Change virtual interface operation in cfg80211 process reset and reinitilize private data structure. (2) Scan result event processed in main process will dereference private data structure concurrently, ocassionly crash the kernel. The cornel case could be trigger by below steps: (1) wpa_cli mlan0 scan (2) ./hostapd mlan0.conf Cfg80211 asynchronous scan procedure is not all the time operated under rtnl lock, here we add the protect to serialize the cfg80211 scan and change_virtual interface operation. Signed-off-by: Limin Zhu <liminzhu@marvell.com> Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22mwifiex: resolve reset vs. remove()/shutdown() deadlocksBrian Norris
commit a64e7a79dd6030479caad603c8d78e6c9c14904f upstream. Commit b014e96d1abb ("PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()") resolves races between driver reset and removal, but it introduces some new deadlock problems. If we see a timeout while we've already started suspending, removing, or shutting down the driver, we might see: (a) a worker thread, running mwifiex_pcie_work() -> mwifiex_pcie_card_reset_work() -> pci_reset_function() (b) a removal thread, running mwifiex_pcie_remove() -> mwifiex_free_adapter() -> mwifiex_unregister() -> mwifiex_cleanup_pcie() -> cancel_work_sync(&card->work) Unfortunately, mwifiex_pcie_remove() already holds the device lock that pci_reset_function() is now requesting, and so we see a deadlock. It's necessary to cancel and synchronize our outstanding work before tearing down the driver, so we can't have this work wait indefinitely for the lock. It's reasonable to only "try" to reset here, since this will mostly happen for cases where it's already difficult to reset the firmware anyway (e.g., while we're suspending or powering off the system). And if reset *really* needs to happen, we can always try again later. Fixes: b014e96d1abb ("PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()") Cc: <stable@vger.kernel.org> Cc: Xinming Hu <huxm@marvell.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-17mwifiex: check for NL80211_SCAN_FLAG_RANDOM_ADDR during hidden SSID scanGanapathi Bhat
At the end of user scan request, driver will perform an active scan for hidden SSIDs in passive channels. While doing this, driver unconditionally adding random_mac in scan command, which is no expected. It should add random_mac only if scan_request has NL80211_SCAN_FLAG_RANDOM_ADDR flag set. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17mwifiex: do not use random MAC for pre-association scanningGanapathi Bhat
Driver should use random MAC address only if the scan is requested by user(provided NL80211_SCAN_FLAG_RANDOM_ADDR is set in scan request). It should not be used for a scan performed before association. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10mwifiex: uap: enable 11d based on userspace configruationXinming Hu
This patch check whether userspace beacon data include country ie, if so then download command to enable 11d setup in firmeare accordingly. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10mwifiex: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10libertas_tf: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10libertas: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08mwifiex: p2p: use separate device addressXinming Hu
Per below statement about p2p device address in WFA P2P spec $2.4.3: The P2P Device Address of a P2P Device shall be its globally administered MAC address, or its globally administered MAC address with the locally administered bit set. This patch follow above statement, using a separate device address for p2p interface Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08mwifiex: wrapper wps ie in pass through tlvXinming Hu
This patch wrapper wps ie in pass through tlv, so that firmware could parse correctly. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08mwifiex: Do not change bss_num in change_virtual_intfXinming Hu
Commit 4d7ab36f0c47 ("mwifiex: Do not change bss_type in change_virtual_intf") kept original bss_type unchanged. bss_num should keep the same style, in this way. Unique tuple (bss_type, bss_num) will be able to locate the right priv structure. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08mwifiex: replace netif_carrier_on/off by netif_device_attach/dettachGanapathi Bhat
Driver is doing netif_carrier_off during suspend, which will set the IFF_LOWER_UP flag to 0. As a result certain applications will think this as a real carrier down and behave accordingly. This will cause issues like loss of IP address, for example. To fix this use netif_device_dettach during suspend. Fixes: 0026b32d723e ('mwifiex: fix Tx timeout issue during suspend test') Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03mwifiex: pcie: compatible with wifi-only image while extract wifi-part fwXinming Hu
Sometimes, we might using wifi-only firmware with a combo firmware name, in this case, do not need to filter bluetooth part from header. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03mwifiex: make addba request command cleanXinming Hu
uninitilized variable, such as .add_req_result might be magic stack value. Initialize the structure to make it clean. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03mwifiex: correct IE parse during associationXinming Hu
It is observed that some IEs get missed during association. This patch correct the old IE parse code. sme->ie will be store as wpa ie, wps ie, wapi ie and gen ie accordingly. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: fix spelling mistake: "Insuffient" -> "Insufficient"Colin Ian King
Trivial fix to spelling mistake in mwifiex_dbg debug message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: usb: fix spelling mistake: "aggreataon"-> "aggregation"Colin Ian King
Trivial fix to spelling mistake in aggr_ctrl module parameter message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: disable uapsd in tdls configXinming Hu
Tdls uapsd support capability is default disabled during tdls setup, correspondingly it should also been disabled in tdls config. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Zhiyuan Yang <yangzy@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: usb: unlock on error in mwifiex_usb_tx_aggr_tmo()Dan Carpenter
We need to unlock if mwifiex_usb_prepare_tx_aggr_skb() fails. Fixes: a2ca85ad721d ("mwifiex: usb: add timer to flush aggregation packets") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: uninit wakeup info in the error handlingJeffy Chen
We inited wakeup info at the beginning of mwifiex_add_card, so we need to uninit it in the error handling. It's much the same as what we did in: 36908c4 mwifiex: uninit wakeup info when removing device Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: fix compile warning of unused variableShawn Lin
We got a compile warning shows below: drivers/net/wireless/marvell/mwifiex/sdio.c: In function 'mwifiex_sdio_remove': drivers/net/wireless/marvell/mwifiex/sdio.c:377:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Per the code, it didn't check if mwifiex_sdio_read_fw_status finish successfully. We should at least check the return of mwifiex_sdio_read_fw_status, otherwise the following check of firmware_stat and adapter->mfg_mode is pointless as the device is probably dead. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: drop num CPU noticeBrian Norris
This print isn't very useful. It's also different between mwifiex_add_card() and mwifiex_reinit_sw(), and I'd like to consolidate them eventually. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: keep mwifiex_cancel_pending_ioctl() staticBrian Norris
It has some scary comments about "only being called" from the timeout handler, so let's help keep it that way. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: pcie: remove unnecessary 'pdev' checkBrian Norris
'card->dev' is initialized once and is never cleared. Drop the unnecessary "safety" check, as it simply obscures things, and we don't do this check everywhere (and therefore it's not really "safe"). Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: pcie: disable device DMA before unmapping/freeing buffersBrian Norris
In testing the mwifiex reset code path, I've noticed KASAN complaining about some "overwritten poison values" in our RX buffer descriptors. Because KASAN didn't notice this at the time of a CPU write, this seems to suggest that the device is writing to this memory. This makes a little sense, because when resetting, we don't necessarily expect the device to be responsive, so we don't have a chance to disable everything cleanly. We can at least take the precaution of disabling DMA for the device though, and in my testing that seems to clear up this particular issue. This patch reorders the removal path so that we disable the device *before* releasing our last PCIe buffers, and it clears/sets the bus master feature from the PCI device when resetting. Along the way, remove the insufficient (and confusing) error path in mwifiex_pcie_up_dev() (it doesn't unwind things well enough, and it doesn't propagate its errors upward anyway). Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: debugfs: allow card_reset() to cancel thingsBrian Norris
The card_reset() implementation should be setting our state flags and cancelling commands for us (i.e., in mwifiex_shutdown_drv()), so let's not do it here. Also, this debugfs file is useful for testing and debugging the reset feature, so we shouldn't do extra preparatory steps here, as that might cause different reset behavior, which could either cause new bugs or paper over existing ones that this debug feature should otherwise help us catch. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: pcie: unify MSI-X / non-MSI-X interrupt processBrian Norris
After removing the interrupt loop in commit 5d5ddb5e0d9b ("mwifiex: pcie: don't loop/retry interrupt status checks"), there is practically zero difference between mwifiex_process_pcie_int() (which handled legacy PCI interrupts and MSI interrupts) and mwifiex_process_msix_int() (which handled MSI-X interrupts). Let's add the one relevant line to mwifiex_process_pcie_int() and kill the copy-and-paste. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: pcie: remove unnecessary masksBrian Norris
After removing the interrupt loop in commit 5d5ddb5e0d9b ("mwifiex: pcie: don't loop/retry interrupt status checks"), we don't need to keep track of the cleared interrupts (actually, we didn't need to do that before, but we *really* don't need to now). Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: drop 'add_tail' param from mwifiex_insert_cmd_to_pending_q()Brian Norris
It's always called with 'true' -- we only determine it 'false' locally within this function. So drop the parameter. Also, this should be 'bool' (since we use true/false), not 'u32'. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28mwifiex: don't open-code ARRAY_SIZE()Brian Norris
Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-23 14:39:09 +0000