summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2013-08-07apalis_t30: igb: add un-programmed i211 supportMarcel Ziswiler
I211 with a blank iNVM uses a different PCI ID. Hack the driver to load despite i211 data sheet claiming tools only, not for driver. Please note that the existing driver hacks concerning NVM validation skipping and Ethernet MAC address assignment equally apply. Tested on initial samples of Apalis T30 1GB V1.0A.
2013-05-09net: igb: apalis_t30: revise Ethernet MAC address assignmentMarcel Ziswiler
Revise Ethernet MAC address assignment: should now handle up to two instances of custom user MACs (2nd one with a 0x100000 offset). This way customer does not have to worry about NVM on a secondary Ethernet on the carrier board and still gets a valid official MAC address from us (e.g. analogous to how we did it on our Protea carrier board).
2013-04-16net: asix: fix Ethernet MAC address assignment after suspendMarcel Ziswiler
Turns out after suspend an unbind and bind operation is executed upon which we subsequently gave out the 2nd custom user MAC address followed by the default ASIX MAC address. This patch fixes it by checking for the custom user MAC address upon unbinding and in this case properly releasing it for subsequent reuse.
2013-03-12colibri_t20/30: can: integrate mcp251x and sja1000 supportMarcel Ziswiler
Integrate CAN support for the Colibri Evaluation Board V3.1a with built-in MCP2515 SPI CAN controller resp. the Colibri Evaluation Board V2.1c with its built-in SJA1000 CAN controller connected to the GMI bus. The following kernel configuration needs to be enabled as well: CONFIG_CAN CONFIG_CAN_RAW CONFIG_CAN_BCM CONFIG_CAN_DEV Plus depending on the Evaluation Board revision: CONFIG_CAN_MCP251X or CONFIG_CAN_SJA1000 CONFIG_CAN_SJA1000_PLATFORM Optional support for 32-bit GMI as well as xPOD CAN on MECS Tellurium for Colibri T20 is provided via commented defines in arch/arm/mach-tegra/board-colibri_t20.h.
2013-03-03Conflicts:Marcel Ziswiler
arch/arm/mach-tegra/common.c drivers/ata/ahci-tegra.c
2013-01-24igb: Add Support for new i210/i211 devices.Marcel Ziswiler
The following commit actually missed adding the new files: 7925180aee227f3de7af4a8cbad1c4b203a9132e
2013-01-24igb: apalis_t30: no NVM and hard-coded MAC address hacksMarcel Ziswiler
Springville with a blank Flash uses a different PCI ID. Hack the driver to load despite i210 data sheet claiming tools only, not for driver. Hack the driver to skip NVM validation on Apalis T30 for now. Hack the driver to use a hard-code MAC address on Apalis T30 for now.
2013-01-23igb: Add Support for new i210/i211 devices.Carolyn Wyborny
This patch adds new initialization functions and device support for i210 and i211 devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-23igb: Add function and pointers for 82580 low power state settings.Carolyn Wyborny
82580 and later parts did not have low power setting functions. This patch adds the specific functions, pointers and assignments for these low power settings. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-11driver: bcm4329: initialize SSID variable properlyMursalin Akon
initialize SSID variable properly to ensure no memory overrun. Bug 1204024 Change-Id: I2485c13edcf6a0feeae3cd4b2e9e98910a771dd2 Signed-off-by: Mursalin Akon <makon@nvidia.com> Reviewed-on: http://git-master/r/190684 Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit
2013-01-09driver: bcmdhd: do not allow hang thread after cleanupMursalin Akon
do not allow scheduling hang thread after cleanup is done. Bug 1210849 Bug 1205910 Bug 1163014 Change-Id: Idc5f9fd6a3d210843f1168e57ceef107599d5789 Signed-off-by: Mursalin Akon <makon@nvidia.com> Reviewed-on: http://git-master/r/189721 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Reviewed-by: Allen Martin <amartin@nvidia.com>
2013-01-08can: mcp251x: add BERR counter functionalityMitja Spes
Add BERR counter functionality to MCP251x driver. Signed-off-by: Mitja Spes <mitja@lxnav.com>
2012-12-05net: asix: revise Ethernet MAC address assignmentMarcel Ziswiler
Revise Ethernet MAC address assignment: should now use MAC from EEPROM if set and further handles up to two instances of custom user MACs (2nd one with a 0x100000 offset). This way customer does not have to put EEPROM on a secondary Ethernet on the carrier board and still gets a valid official MAC address from us (e.g. analogous to how we did it on our Protea carrier board).
2012-11-12Merge branch 'l4t/l4t-r16-r2' into colibriMarcel Ziswiler
Conflicts: arch/arm/mach-tegra/tegra3_usb_phy.c arch/arm/mach-tegra/usb_phy.c drivers/usb/gadget/tegra_udc.c drivers/usb/otg/Makefile drivers/video/tegra/fb.c sound/soc/tegra/tegra_pcm.c
2012-10-04bcmdhd: use the wiphy from private data structure (i.e., wl_priv)Mursalin Akon
problem: The macro wiphy_from_scan retrieves wiphy from wl_priv->escan_info.wiphy which is in turn set by a 'scan' initiated from kernel space (like scheduled scan) or from user space (like iwlist command). Without a scan, a 'connect' crashes in function wl_inform_single_bss, with NULL pointer access, as the variable wiphy (in turn, wl->escan_info.wiphy) is not initialized properly. solution: wireless_device data structures maintained for both STA and P2P mode point to the same wiphy (see, wl_cfgp2p_register_ndev in wl_cfgp2p.c). So, irrespective of whatever wireless_device is in use, a scan will always set wl_priv->escan_info.wiphy to the same wiphy. There is no point in getting wiphy using wl_priv->escan_info.wiphy, rather use the wiphy referred by all wireless_device structures. Bug 1029792 Bug 1029733 Change-Id: I6d744950d3a053642ffa998b3c3f3ba60c0cb687 Signed-off-by: Mursalin Akon <makon@nvidia.com> Reviewed-on: http://git-master/r/141629 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Matthew Pedro <mapedro@nvidia.com> GVS: Gerrit_Virtual_Submit
2012-10-04bcmdhd: do not turn off mmc at probeMursalin Akon
Do not turn off mmc at probe if watchdog thread is in use. Bug 1029792 Bug 1029733 Change-Id: Ia2e303daa27688c96e7fa5941e01cf821166c498 Signed-off-by: Mursalin Akon <makon@nvidia.com> Reviewed-on: http://git-master/r/141628 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Matthew Pedro <mapedro@nvidia.com> GVS: Gerrit_Virtual_Submit
2012-10-04net: wireless: bcmdhd: cleanup Kconfig/MakeMursalin Akon
cleanup bcmdhd driver Kconfig and Makefile Bug 1029792 Bug 1029733 Change-Id: Ic947644d2159a52fab7aea1621e12e51d8ee6332 Signed-off-by: Mursalin Akon <makon@nvidia.com> Reviewed-on: http://git-master/r/141627 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Matthew Pedro <mapedro@nvidia.com> GVS: Gerrit_Virtual_Submit
2012-09-10Merge branch 'l4t/l4t-r16' into colibriMarcel Ziswiler
Merge with latest NVIDIA L4T R16. Only real conflict concerning inverted VBUS gpio support.
2012-09-04usbnet: fix skb traversing races during unlink(v2)Ming Lei
Commit 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d(net/usbnet: avoid recursive locking in usbnet_stop()) fixes the recursive locking problem by releasing the skb queue lock before unlink, but may cause skb traversing races: - after URB is unlinked and the queue lock is released, the refered skb and skb->next may be moved to done queue, even be released - in skb_queue_walk_safe, the next skb is still obtained by next pointer of the last skb - so maybe trigger oops or other problems This patch extends the usage of entry->state to describe 'start_unlink' state, so always holding the queue(rx/tx) lock to change the state if the referd skb is in rx or tx queue because we need to know if the refered urb has been started unlinking in unlink_urbs. The other part of this patch is based on Huajun's patch: always traverse from head of the tx/rx queue to get skb which is to be unlinked but not been started unlinking. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit 5b6e9bcdeb65634b4ad604eb4536404bbfc62cfa) Bug 1040642 Change-Id: I1a8c248016529bebf71d540738ad4726cf3f59b7 Signed-off-by: Steve Lin <stlin@nvidia.com> Reviewed-on: http://git-master/r/128693 GVS: Gerrit_Virtual_Submit
2012-08-23net/usbnet: avoid recursive locking in usbnet_stop()Steve Lin
|kernel BUG at kernel/rtmutex.c:724! |[<c029599c>] (rt_spin_lock_slowlock+0x108/0x2bc) from [<c01c2330>] (defer_bh+0x1c/0xb4) |[<c01c2330>] (defer_bh+0x1c/0xb4) from [<c01c3afc>] (rx_complete+0x14c/0x194) |[<c01c3afc>] (rx_complete+0x14c/0x194) from [<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) |[<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) from [<c01e1ff4>] (musb_giveback+0x34/0x40) |[<c01e1ff4>] (musb_giveback+0x34/0x40) from [<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) |[<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) from [<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) |[<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) from [<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) |[<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) from [<c01cbb90>] (unlink1+0xbc/0xcc) |[<c01cbb90>] (unlink1+0xbc/0xcc) from [<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) |[<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) from [<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) |[<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) from [<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) |[<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) from [<c01c2d68>] (usbnet_stop+0x100/0x15c) |[<c01c2d68>] (usbnet_stop+0x100/0x15c) from [<c020f718>] (__dev_close_many+0x94/0xc8) defer_bh() takes the lock which is hold during unlink_urbs(). The safe walk suggest that the skb will be removed from the list and this is done by defer_bh() so it seems to be okay to drop the lock here. Reported-by: Aníbal Almeida Pinto <anibal.pinto@efacec.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d) --------------------------------------------------------------------- net/usbnet: reserve headroom on rx skbs network drivers should reserve some headroom on incoming skbs so that we dont need expensive reallocations, eg forwarding packets in tunnels. This NET_SKB_PAD padding is done in various helpers, like __netdev_alloc_skb_ip_align() in this patch, combining NET_SKB_PAD and NET_IP_ALIGN magic. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit 7bdd402706cf26bfef9050dfee3f229b7f33ee4f) --------------------------------------------------------------------- usbnet: use netif_tx_wake_queue instead of netif_start_queue If host is going to autosuspend function with two interfaces and if IP packet has arrived in-between of two usbnet_suspend() callbacks, i.e usbnet_resume() is called in-between, tx data flow is stopped. When autosuspend timer expires and device is put to autosuspend again, tx queue is waked up and data can be sent again. This behavior might be repeated several times in a row. Tested on Intel/ARM. Reviewed-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Tested-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit 1aa9bc5b2f4cf8c48944fb9a607bf1dd674e2c10) --------------------------------------------------------------------- usbnet: increase URB reference count before usb_unlink_urb Commit 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d(net/usbnet: avoid recursive locking in usbnet_stop()) fixes the recursive locking problem by releasing the skb queue lock, but it makes usb_unlink_urb racing with defer_bh, and the URB to being unlinked may be freed before or during calling usb_unlink_urb, so use-after-free problem may be triggerd inside usb_unlink_urb. The patch fixes the use-after-free problem by increasing URB reference count with skb queue lock held before calling usb_unlink_urb, so the URB won't be freed until return from usb_unlink_urb. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit 0956a8c20b23d429e79ff86d4325583fc06f9eb4) --------------------------------------------------------------------- usbnet: don't clear urb->dev in tx_complete URB unlinking is always racing with its completion and tx_complete may be called before or during running usb_unlink_urb, so tx_complete must not clear urb->dev since it will be used in unlink path, otherwise invalid memory accesses or usb device leak may be caused inside usb_unlink_urb. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit 5d5440a835710d09f0ef18da5000541ec98b537a) --------------------------------------------------------------------- usbnet: consider device busy at each recieved packet usbnet should centrally handle busy reporting in the rx path so subdrivers need not worry. This hurts use cases which do rx only or predominantly. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit 8a78335442cea429afb2b964318b6e257448ea00) --------------------------------------------------------------------- usbnet: fix leak of transfer buffer of dev->interrupt The transfer buffer of dev->interrupt is allocated in .probe path, but not freed in .disconnet path, so mark the interrupt URB as URB_FREE_BUFFER to free the buffer when the URB is destroyed. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit 267a83e8e00dc5a878b24c39883643c20a8b1482) Bug 1036768 Change-Id: I5d6620c8ff4e6cef52c3f467fb2196658c4d47b1 Signed-off-by: Steve Lin <stlin@nvidia.com> Reviewed-on: http://git-master/r/125338 GVS: Gerrit_Virtual_Submit
2012-08-09net: wireless: bcmdhd: Update to 5.90.195.75Narayan Reddy
Bug 1023045 Change-Id: Id6e43c852a90cbd5445daf38279ed690712c3332 Signed-off-by: Narayan Reddy <narayanr@nvidia.com> Reviewed-on: http://git-master/r/117637 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Rakesh Kumar <krakesh@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2012-08-02net: caif: tegra: enable warnings as errors flagDeepak Nibade
-enable warnings as errors compilation flag bug 949219 Change-Id: Ifeaba174d59c437e0068324b73dffd287f90c957 Signed-off-by: Deepak Nibade <dnibade@nvidia.com> Reviewed-on: http://git-master/r/118041 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Sanjay Singh Rawat <srawat@nvidia.com> Reviewed-by: Sheshagiri Shenoy <sshenoy@nvidia.com> Reviewed-by: Varun Wadekar <vwadekar@nvidia.com> Reviewed-by: Sri Krishna Chowdary <schowdary@nvidia.com>
2012-07-31usb: cdc_ether: Add rmnet device info to ZM5250BH Hsieh
Modified device info element for ZM5250 to sync with framework. Change-Id: I855678edccef50c549960ee209e500ec6d692e36 Signed-off-by: BH Hsieh <bhsieh@nvidia.com>
2012-07-30net: wireless: bcmdhd: power off card when not in useOm Prakash Singh
Power off the card when wifi is off and power up only when wifi is turned on Bug 1011349 Change-Id: I26a8188d932516c0490dec858acd9e8ea2c5adf8 Signed-off-by: Om Prakash Singh <omp@nvidia.com> Reviewed-on: http://git-master/r/118097 Reviewed-by: Pavan Kunapuli <pkunapuli@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com> Tested-by: Bharat Nihalani <bnihalani@nvidia.com> Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
2012-07-27net: usb: asix: disable failing auto detachT20_LinuxImageV2.0Alpha1_20120808Marcel Ziswiler
Disable failing auto detach stuff for now as it caused the following issue upon cable disconnect: [ 49.504039] eth0: EEPROM (0x18) = : 0800 [ 49.624580] eth0: EVENT: AX_CHK_AUTODETACH
2012-07-25net: usb: asix: update to driver 4.4.0Marcel Ziswiler
We noticed stability issues trying to mount a root file system over NFS. Looks like an updated driver from Asix works much better. BTW: The mainline driver also has issues doing the same: [ 174.422441] asix 1-1:1.0: eth0: asix_rx_fixup() Bad Header Length [ 174.430045] asix 1-1:1.0: eth0: asix_rx_fixup() Bad RX Length 1645 Further investigation pending (e.g. backporting post 3.5 mainline driver).
2012-07-23drivers: net: raw-ip: Add IPv6 support.Michael Hsu
Upon receiving IPv6 packet, set ethernet header's ether type to 0x86dd. For transmission of IPv6, nothing extra required, as the 14 byte ethernet header (containing the 0x86dd ether type) is already stripped off as part of the raw-ip protocol. Bug 1010735 Change-Id: Id574a7feeefbde0504ad0ea449dff28340e9356a Signed-off-by: Michael Hsu <mhsu@nvidia.com> Reviewed-on: http://git-master/r/113761 (cherry picked from commit 8bdfd06cae7eede4856ef825ea26b69c9ea065ef) Reviewed-on: http://git-master/r/117148 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Vinayak Pane <vpane@nvidia.com> Tested-by: Vinayak Pane <vpane@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Steve Lin <stlin@nvidia.com>
2012-07-18net: wireless: bcm4329: Fix GCC 4.6 warningDan Willemsen
This module has -Werror turned on, so this was causing the build to break on GCC 4.6: drivers/net/wireless/bcm4329/wl_iw.c: In function 'wl_iw_set_pmksa': drivers/net/wireless/bcm4329/wl_iw.c:5149:5: error: array subscript is above array bounds [-Werror=array-bounds] drivers/net/wireless/bcm4329/wl_iw.c:5152:5: error: array subscript is above array bounds [-Werror=array-bounds] It's a partial 'backport' of a change made to the bcmdhd driver: commit 09a8dc7361d0e603d9935ec7f736fabaa2e6dc7a net: wireless: bcmdhd: Combined P2P fix Change-Id: Ie62ad82f884c213553772ac91eaf85e17a807503 Signed-off-by: Dan Willemsen <dwillemsen@nvidia.com> Reviewed-on: http://git-master/r/88694 GVS: Gerrit_Virtual_Submit Reviewed-by: Stephen Warren <swarren@nvidia.com>
2012-07-17net: wireless: bcmdhd: disable WLC_E_TXFAIL event.Narayan Reddy
In suspend mode WLC_E_TXFAIL event is causing autowake when the device is connected to an AP, so discarding the WLC_E_TXFAIL event initialization as per BRCM team suggestion. Bug 1014610 Change-Id: I297dab7ee589f458bba3e26be090665a36c78502 Signed-off-by: Narayan Reddy <narayanr@nvidia.com> Reviewed-on: http://git-master/r/115633 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Rakesh Goyal <rgoyal@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2012-07-17net: usb: raw-ip: support more rmnet interfacesVinayak Pane
New requirement to support upto 5 rmnet interfaces with raw-ip. Driver will be able to support dynamically multiple number of interfaces, maximum to 5. Bug 1006183 Signed-off-by: Vinayak Pane <vpane@nvidia.com> Reviewed-on: http://git-master/r/112790 (cherry picked from commit 0dde53830d9e21004b2e90c1b997a54c89767fa1) Change-Id: I8166c448dbfef0391491ffdef9dff2b0e2693d75 Reviewed-on: http://git-master/r/115611 Tested-by: Vinayak Pane <vpane@nvidia.com> Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Steve Lin <stlin@nvidia.com>
2012-07-11net: wireless: WFD specific changesJun (Gab-Joo) Lim
WFD specific changes integrated from broadcom patch Bug 1001418 Bug 997838 Change-Id: I0632307bf5fb959def4ee12687430a14ab9e068e Signed-off-by: Narayan Reddy <narayanr@nvidia.com> Reviewed-on: http://git-master/r/111032 Reviewed-by: Automatic_Commit_Validation_User Tested-by: Rakesh Goyal <rgoyal@nvidia.com> Reviewed-by: Rakesh Kumar <krakesh@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2012-07-03net: wireless: bcmdhd: do not register for allMursalin Akon
Do not register bcmdhd driver for all sdio devices. Bug 1006828 Change-Id: I49e2d2bc7fbda4414392d8a28a0feefb1c8031ec Signed-off-by: Mursalin Akon <makon@nvidia.com> Reviewed-on: http://git-master/r/113045 Reviewed-by: Simone Willett <swillett@nvidia.com> Tested-by: Simone Willett <swillett@nvidia.com>
2012-07-01net: wireless: bcmdhd: move barrier to after setting the suspended flag.Sang-Hun Lee
Reviewed-on: http://mcrd1-5.corpnet.asus/code-review/master/47846 Tested-by: Kirt Hsieh <Kirt_Hsieh@asus.com> Reviewed-by: Kirt Hsieh <Kirt_Hsieh@asus.com> Reviewed-by: Vincent Yue <Vincent_Yue@asus.com> Bug 984811 Signed-off-by: Roger Hsieh <rhsieh@nvidia.com> Change-Id: I708dadddf3f3eac9f8bacc72e3aef94247a87e70 Reviewed-on: http://git-master/r/106352 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Sang-Hun Lee <sanlee@nvidia.com> Tested-by: Sang-Hun Lee <sanlee@nvidia.com> Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
2012-06-26usb: cdc_ether: Add rmnet device info to PH450 and TangoMohan T
Modified device info element for PH450 and Tango to sync with framework. Change-Id: I325571358f8c1875484254a9f497c606adb03180 Signed-off-by: Mohan T <mohant@nvidia.com> Reviewed-on: http://git-master/r/110765 Reviewed-by: Automatic_Commit_Validation_User GVS: Gerrit_Virtual_Submit Reviewed-by: Matthieu Vincenot <mvincenot@nvidia.com> Reviewed-by: Steve Lin <stlin@nvidia.com>
2012-06-22net: wireless: bcmdhd: Enable 5 GHz supportNitin Bindal
Update wiphy (wireless hardware description) to support 5 GHz scan. Bug 1000888 Change-Id: I1a7a99f97f69dd8f1790f81ee0fb21e209e8d10e Signed-off-by: Nitin Bindal <nbindal@nvidia.com> Reviewed-on: http://git-master/r/109556 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Rakesh Kumar <krakesh@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2012-06-15net: wireless: bcmdhd: fix Makefile and KconfigOm Prakash Singh
Bug 999876 Change-Id: I83a139e6c0dd42cf095fa2ac1376732075a15434
2012-06-15net: wireless: bcmdhd: Fix P2P driver crash for MFG firmwareLeslie Yu
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-06-15net: wireless: bcmdhd: Make responce waiting uninterruptibleDmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-06-15net: wireless: bcmdhd: Fix WPS PBC overlap failureNeeraj Kumar Garg
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-06-15net: wireless: bcmdhd: Ignore signal_pending() while waiting in IOCTLDmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-06-15net: wireless: bcmdhd: Check return value from dhd_dev_init_ioctl()Dmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-06-15net: wireless: bcmdhd: Fix WARN_ON(!res->pub.channel)Dmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-06-15net: wireless: bcmdhd: Change singal pending return value from -110 to -4Dmitry Shmidt
- ETIMEDOUT is interpreted as FW is not responding, so return EINTR instead Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-06-15net: wireless: bcmdhd: Fix filtering setting in case of P2PDmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-06-15net: wireless: bcmdhd: Avoid turning radio UP twice on startDmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-06-15net: wireless: bcmdhd: Set MMC_PM_KEEP_POWER flag on suspendDmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-06-15net: wireless: bcmdhd: Update to Version 5.90.195.61Dmitry Shmidt
- Deauth frame from p2p GO to client doesn't go from firmware if we do del_virtual_iface immediately. Putting a delay after sending deauth frame to allowed FW to send out deauth frame. - IF_DEL operation was timing out due to wrong status check. Fixed it and added few debug prints. - Sending Provision Discovery directly to GO instead of doing an internal scan. Also put the internal scan count to 3 to have better timings for GO-NEG. - Increase beacon timeout only for concurrent mode. For STA only operation, use the default beacon timeout value (4). - If scan abort is due to timeout, aborting the scan in FW is not required. Moreover, as this scan_timeout call is coming in timer interrupt context, all blocking calls such as fw scan abort will result in kernel panic : don’t call abort in Firmware. - Add p2p_cancel_listen routine. Fix p2p_listen_complete related kernel crash seen while turning off WiFi. Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-06-15net: wireless: bcmdhd: Turn OFF wlan power if interface UP failsDmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-06-15net: wireless: bcmdhd: Allow 80211_HT capabilityDmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-06-15net: wireless: bcmdhd: Fix improper band handlingDmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>