summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-04-08iwlagn: clean up & autodetect statisticsJohannes Berg
There's no need to keep both normal and BT statistics versions around all the time in memory when we only use a subset of both. So keep only the subsets that we need in memory, depending on the debug config). Also, in doing so, we can remove all the calls to iwl_bt_statistics() in the driver as we'll just access the copied statistics now. Finally, also remove this call from the one place where it might still be needed and automatically detect what kind of statistics the device is sending based on their size. This way, we don't need to keep track of which devices do what any more, which is good since this is subject to change based on the ucode version (as some ucode even for non-BT devices will in fact use BT statistics). Warn upon encountering a statistics command from the ucode that isn't known, so we will find such issues earlier in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: sensitivity and chain noise done by driverWey-Yi Guy
_agn driver should perform both sensitivity and chain noise calib. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: tx power calib always done in firmwareWey-Yi Guy
Remove the config flag for tx power calib Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: all _agn devices support power save modeWey-Yi Guy
Remove broken_power_save checking Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: more cleanup to remove unused referenceWey-Yi Guy
More cleanup code, no functional changes Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: remove un-needed configurationWey-Yi Guy
After driver split, set_l0s config is no longer needed, remove it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: remove more reference to legacy devicesWey-Yi Guy
Remove the reference to both 3945 and 4965 in LED code Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: cleanup to remove the reference for 3945Wey-Yi Guy
More clean up after driver split Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: remove unused 3945 defineWey-Yi Guy
3945 no longer apply Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: no 3945 define neededWey-Yi Guy
Remove 3945 define Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: PAPD read for 2000 series devicesWey-Yi Guy
For 2000 series NICs, disable OTP refresh in order to read correct PAPD table from high OTP block Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlwifi: fix bugs in change_interfaceJohannes Berg
If change_interface gets invoked during a firmware restart, it may crash; prevent that from happening by checking if ctx->vif is assigned. Additionally, in my initial commit I forgot to set the vif->p2p variable correctly, so fix that too. Cc: stable@kernel.org [2.6.38+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: fix radar frame rejectionGaren Tamrazian
The microcode may sometimes reject TX frames when on a radar channel even after we associated as it clears information during association and needs to receive a new beacon before allowing that channel again. This manifests itself as a TX status value of TX_STATUS_FAIL_PASSIVE_NO_RX. So in this case, stop the corresponding queue and give the frame back to mac80211 for retransmission. We start the queue again when a beacon from the AP is received which will make the regulatory enforcement in the device allow transmitting again. Signed-off-by: Garen Tamrazian <garenx.tamrazian@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlagn: remove un-necessary function pointerWey-Yi Guy
After driver split, no need to use function pointer for those event and register dump function. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlwifi: remove extranious macro from firmware defineroot
define of firmware filenames use extra macro to build the files name. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-07Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/rtlwifi/efuse.c drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c net/bluetooth/mgmt.c
2011-04-07iwlagn: move IO functions out of lineJohannes Berg
This generates a massive reduction in module size: with debug: text data bss dec hex filename 670300 13136 420 683856 a6f50 iwlagn.ko (before) 388347 13136 408 401891 621e3 iwlagn.ko (after) without debug: text data bss dec hex filename 528575 13072 420 542067 84573 iwlagn.ko (before) 294192 13072 408 307672 4b1d8 iwlagn.ko (after) This also removes all the IO debug functionality since it can easily be replaced by tracing, and makes the code unnecessarily complex. I haven't done any CPU utilisation measurements, but given that the hotpaths don't use much IO it is not likely to have a negative impact; in fact, the size reduction will reduce cache pressure which possibly improves performance. Finally, an unused function or two were removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove ISR opsJohannes Berg
The ISR (interrupt service routine) ops are now no longer necessary since they are the same for all devices this driver now handles. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove rxb page bookkeepingJohannes Berg
We never use the value in alloc_rxb_page, so there's no point in keeping it either. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove rev_idJohannes Berg
The rev_id variable is only printed, we don't need to store it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove hw_revJohannes Berg
The hw_rev variable is used only during init, so there's no need to keep it around. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove hw_wa_revJohannes Berg
The variable is never used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove BSM clock settingJohannes Berg
Again, a 4965 specific code path that we no longer need in iwlagn. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: init cmd_queue earlierJohannes Berg
We know after loading the ucode whether it will support PAN or not, so we can also initialise the cmd_queue variable much earlier. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: clean up alive handlingJohannes Berg
Devices newer than 4965 don't actually send two different versions of the ALIVE command, so we always had a bug here since before this patch we copy more data than we got. Remove the iwl_init_alive_resp struct and don't use it. Since we also really don't need to track all the data received in ALIVE as we only use the error and log event tables later, we can also save space by just keeping those and not more data around in memory. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: fix ucode verify messageJohannes Berg
My previous patch left a message talking about bootstrap, but that's clearly bogus. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: add feature flagsJohannes Berg
Some new devices and microcode files will a greater variety of features, so the TLV-per-feature approach we took before will quickly make things harder to manage and increase the file size. Add a new TLV that has feature flags. Currently, it will contain: 1) a PAN feature flag, which moves from a separate TLV 2) a new BT stats bit that indicates whether the microcode image uses bluetooth statistics 3) a new MFP flag for management frame protection which can be enabled once the device/microcode supports it Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: check more error return codeWey-Yi Guy
In alive notify, we should check return code instead of assume everything ok Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: change Copyright to 2011Wey-Yi Guy
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove ucode_data_backupJohannes Berg
This was used only on 4965 in conjunction with the bootstrap ucode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: centralize and fix ucode restartJohannes Berg
The ucode restart has to take into account a number of things, like clearing the HCMD_ACTIVE and other status bits, and waking up the wait_command_queue. Currently, however, there are a number of places that neither do that, nor actually set the FW error bit that leads to proper restart handling, which means that in those cases things will probably just hang completely. To clean this up, make all ucode restart go through a single function, except for the cases where it's called during firmware loading. Also fix a bug in wimax coexist restart avoidance, it needs to first clear the status bits (and it has to clear the HCMD_ACTIVE one as well) and then wake up anything waiting on wait_command_queue. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove bootstrap codeJohannes Berg
Only 4965 had a bootstrap microcode image, so the agn driver can completely ignore that and we can remove some code from it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: verify specific ucodeJohannes Berg
When we loaded a ucode, there's no point in checking any one that is present, we know which one is supposed to be present so also verify that it is exactly the right one. That also simplifies the code and makes it faster since it doesn't have to check all. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: simplify ucode check codeJohannes Berg
The code in iwlcore_verify_inst_sparse really doesn't need to keep track of the number of errors it encountered since a single one is fatal. Also, the code in iwl_verify_inst_full is just used to print out some things, so rename it to iwl_print_inst and don't give it a return code and just make it print out the values. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: return send calibration resultWey-Yi Guy
In alive notification call, return the status from iwl_send_calib_results() Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove pointless return variablesJohannes Berg
A number of places just use a variable to return it right away, which is useless, so let's remove the variables there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove more 3945/4965 related definesWey-Yi Guy
After driver split, remove unused #defines Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: clean up ucode loadingJohannes Berg
All agn devices behave the same, so there's no need to go through function pointers for any of the ucode loading functionality. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: make mac80211 handlers staticJohannes Berg
Now that these handlers are no longer shared between 4965 and agn, they can be static. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: clean up some 3945/4965 remnantsJohannes Berg
When the driver was split, a bunch of definitions for the 3945 and 4965 devices stayed around, but they're now useless so remove (some of) them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove unused variableJohannes Berg
Some code was removed, but a variable it used and that is now unused stayed around, kill it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07rt2x00: Drop __TIME__ usageMichal Marek
The kernel already prints its build timestamp during boot, no need to repeat it in random drivers and produce different object files each time. Signed-off-by: Michal Marek <mmarek@suse.cz> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07mwl8k: Do not configure tx power unconditionallyNishant Sarmukadam
Instead of configuring tx power unconditionally, check for IEEE80211_CONF_CHANGE_POWER and configure it only when stack sets this flag Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: configure beacons based on hw opmodeRajkumar Manoharan
Current ath9k code does not handle beacon timers on opmode specific. One such example is that a STA beacon config overwrites already configured AP vif's beacon timers during scan. On multi station vif case, configure beacon timers beased on primary vif selected. This also helps while moving back to single STA vif from multi STA vifs, where the power save is enabled and hw has to be reconfigured with proper beacon and bssid/aid. Otherwise connection poll will be triggered so frequently due to beacon loss. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: Handle BSSID/AID for multiple interfacesRajkumar Manoharan
As of now bssid/aid is overridden with recently changed vif's bss config. This may cause improper beacon updation due to bssid/aid mismatch. On station mode, select an associated sta vif as primary vif and configure that vif's bss into hw. Update the primary vif on interface change and bss info change. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: Cleanup ath_vif structRajkumar Manoharan
Remove unused bssid from ath_vif and set av_bslot on beacon alloc/return. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07ath9k: deny new interface addtion on IBSS modeRajkumar Manoharan
The present check denies the IBSS interface addtion if we already have any other vifs. But it fails to deny interface addition if IBSS was already present. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07wl1251: Add support for idle modeJarkko Nikula
On Nokia N900 the wl1251 consumes the most power when the interface is up but not associated to access point (that supports PSM). In terms of battery current consumption, the consumption is ~180 mA higher when the interface is up but not associated and only ~5 mA higher when associated compared to interface down and driver not loaded cases. This patch adds support for the mac80211 idle notifications. Chip is put into idle very much the same way when entering into PSM by utilizing the Extreme Low Power (ELP) mode. I.e. idle is entered by setting necessary conditions in wl1251_ps_set_mode followed by a call to wl1251_ps_elp_sleep. It seems it is just enough the authorize ELP mode followed by CMD_DISCONNECT (thanks to Kalle Valo about the idea to use it). Without disconnect command the chip remains somewhat active and stays consuming ~20 mA. Idle mode is left by same way than PSM. The wl1251_join call is used to revert the CMD_DISCONNECT. Without it association to AP doesn't work when trying second time. With this patch the interface up but not associated case the battery current consumption is less than 1 mA higher compared to interface down case. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07wl1251: Prepare for idle mode supportJarkko Nikula
RFC for WL1251 idle mode support brought a few issues that are worth to update before adding the idle mode support. Since the idle mode can reuse the code that is now used in Power Save Mode (PSM), the flag psm in struct wl1251 is changed to variable station_mode to be able to distinguish between PSM and idle modes. As the station mode is different than the power power save mode command that is sent to chip, the enum wl1251_cmd_ps_mod values are used only when communicating with the chip and new enum wl1251_station_mode values are used inside the driver. Confusing comment about psm and elp relation is removed since the PSM is actually activated by putting the chip into Entreme Low Power (ELP) mode. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07zd1211rw: rename CR* macros to ZD_CR*Jussi Kivilinna
With compat-wireless CR* macros in zd_usb.h conflict with CR macros in include/asm-generic/termbits.h. So rename CR* macros to ZD_CR*. Conversion was done with using sed and then 'over 80 character line' checkpatch.pl warnings and comment indents were fixed. Reported-by: Walter Goldens <goldenstranger@yahoo.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-04 11:51:10 +0000