summaryrefslogtreecommitdiff
path: root/drivers/pci/controller
AgeCommit message (Collapse)Author
2022-05-19Merge remote-tracking branch 'gh-fslc/5.4-2.3.x-imx' into toradex_5.4-2.3.x-imxPhilippe Schenker
2022-05-19Merge tag 'v5.4.193' into update-to-2.3.7__5.4-2.3.x-imxPhilippe Schenker
This is the 5.4.193 stable release Conflicts: arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts drivers/edac/synopsys_edac.c drivers/mmc/host/sdhci-esdhc-imx.c drivers/mmc/host/sdhci.c drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c sound/soc/codecs/msm8916-wcd-analog.c
2022-05-12PCI: aardvark: Fix reading MSI interrupt numberPali Rohár
commit 805dfc18dd3d4dd97a987d4406593b5a225b1253 upstream. In advk_pcie_handle_msi() it is expected that when bit i in the W1C register PCIE_MSI_STATUS_REG is cleared, the PCIE_MSI_PAYLOAD_REG is updated to contain the MSI number corresponding to index i. Experiments show that this is not so, and instead PCIE_MSI_PAYLOAD_REG always contains the number of the last received MSI, overall. Do not read PCIE_MSI_PAYLOAD_REG register for determining MSI interrupt number. Since Aardvark already forbids more than 32 interrupts and uses own allocated hwirq numbers, the msi_idx already corresponds to the received MSI number. Link: https://lore.kernel.org/r/20220110015018.26359-3-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Clear all MSIs at setupPali Rohár
commit 7d8dc1f7cd007a7ce94c5b4c20d63a8b8d6d7751 upstream. We already clear all the other interrupts (ISR0, ISR1, HOST_CTRL_INT). Define a new macro PCIE_MSI_ALL_MASK and do the same clearing for MSIs, to ensure that we don't start receiving spurious interrupts. Use this new mask in advk_pcie_handle_msi(); Link: https://lore.kernel.org/r/20211130172913.9727-5-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15PCI: aardvark: Fix support for MSI interruptsPali Rohár
[ Upstream commit b0b0b8b897f8e12b2368e868bd7cdc5742d5c5a9 ] Aardvark hardware supports Multi-MSI and MSI_FLAG_MULTI_PCI_MSI is already set for the MSI chip. But when allocating MSI interrupt numbers for Multi-MSI, the numbers need to be properly aligned, otherwise endpoint devices send MSI interrupt with incorrect numbers. Fix this issue by using function bitmap_find_free_region() instead of bitmap_find_next_zero_area(). To ensure that aligned MSI interrupt numbers are used by endpoint devices, we cannot use Linux virtual irq numbers (as they are random and not properly aligned). Instead we need to use the aligned hwirq numbers. This change fixes receiving MSI interrupts on Armada 3720 boards and allows using NVMe disks which use Multi-MSI feature with 3 interrupts. Without this NVMe disks freeze booting as linux nvme-core.c is waiting 60s for an interrupt. Link: https://lore.kernel.org/r/20220110015018.26359-4-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated bridgePali Rohár
[ Upstream commit 735f5ae49e1b44742cc63ca9b5c1ffde3e94ba91 ] The emulated bridge returns incorrect value for PCI_EXP_RTSTA register during readout in advk_pci_bridge_emul_pcie_conf_read() function: the correct bit is BIT(16), but we are setting BIT(23), because the code does *value = (isr0 & PCIE_MSG_PM_PME_MASK) << 16 where PCIE_MSG_PM_PME_MASK is BIT(7). The code should probably have been something like *value = (!!(isr0 & PCIE_MSG_PM_PME_MASK)) << 16, but we are better of using an if() and using the proper macro for this bit. Link: https://lore.kernel.org/r/20220110015018.26359-15-kabel@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-15pci: pci-imx6: fix PERST# start-up sequenceAndrejs Cainikovs
According to the PCI-E standard the PERST# signal (reset-gpio in fsl,imx6* compatible dts) should be kept asserted for at least 100 usec before the PCI-E refclock is stable, should be kept asserted for at least 100ms after the power rails are stable and the host should wait at least 100 msec after it is de-asserted before accessing the configuration space of any attached device. From PCI Express Card Electromechanical Specification T-PVPERL: Power stable to PERST# inactive - 100 msec T-PERST-CLK: REFCLK stable before PERST# inactive 100 usec. From PCI Express Base Specification: To allow components to perform internal initialization, system software must wait for at least 100 ms from the end of a Conventional Reset of one or more devices before it is permitted to issue Configuration Requests to those devices Failure to do so could prevent PCI-E devices to be working correctly, and this was experienced with real devices. Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
2022-01-27PCI: pci-bridge-emul: Correctly set PCIe capabilitiesPali Rohár
commit 1f1050c5e1fefb34ac90a506b43e9da803b5f8f7 upstream. Older mvebu hardware provides PCIe Capability structure only in version 1. New mvebu and aardvark hardware provides it in version 2. So do not force version to 2 in pci_bridge_emul_init() and rather allow drivers to set correct version. Drivers need to set version in pcie_conf.cap field without overwriting PCI_CAP_LIST_ID register. Both drivers (mvebu and aardvark) do not provide slot support yet, so do not set PCI_EXP_FLAGS_SLOT flag. Link: https://lore.kernel.org/r/20211124155944.1290-6-pali@kernel.org Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-12Merge remote-tracking branch 'fscl/5.4-2.3.x-imx' into ↵Denys Drozdov
toradex_5.4-2.3.x-imx-v5.4.161 Conflicts: drivers/net/phy/micrel.c drivers/usb/chipidea/core.c
2022-01-10Merge tag 'v5.4.160' into HEADDenys Drozdov
This is the 5.4.160 stable release
2021-12-01PCI: aardvark: Fix support for PCI_BRIDGE_CTL_BUS_RESET on emulated bridgePali Rohár
commit bc4fac42e5f8460af09c0a7f2f1915be09e20c71 upstream. Aardvark supports PCIe Hot Reset via PCIE_CORE_CTRL1_REG. Use it for implementing PCI_BRIDGE_CTL_BUS_RESET bit of PCI_BRIDGE_CONTROL register on emulated bridge. With this, the function pci_reset_secondary_bus() starts working and can reset connected PCIe card. Custom userspace script [1] which uses setpci can trigger PCIe Hot Reset and reset the card manually. [1] https://alexforencich.com/wiki/en/pcie/hot-reset-linux Link: https://lore.kernel.org/r/20211028185659.20329-7-kabel@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Set PCI Bridge Class Code to PCI BridgePali Rohár
commit 84e1b4045dc887b78bdc87d92927093dc3a465aa upstream. Aardvark controller has something like config space of a Root Port available at offset 0x0 of internal registers - these registers are used for implementation of the emulated bridge. The default value of Class Code of this bridge corresponds to a RAID Mass storage controller, though. (This is probably intended for when the controller is used as Endpoint.) Change the Class Code to correspond to a PCI Bridge. Add comment explaining this change. Link: https://lore.kernel.org/r/20211028185659.20329-6-kabel@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Fix support for bus mastering and PCI_COMMAND on emulated bridgePali Rohár
commit 771153fc884f566a89af2d30033b7f3bc6e24e84 upstream. >From very vague, ambiguous and incomplete information from Marvell we deduced that the 32-bit Aardvark register at address 0x4 (PCIE_CORE_CMD_STATUS_REG), which is not documented for Root Complex mode in the Functional Specification (only for Endpoint mode), controls two 16-bit PCIe registers: Command Register and Status Registers of PCIe Root Port. This means that bit 2 controls bus mastering and forwarding of memory and I/O requests in the upstream direction. According to PCI specifications bits [0:2] of Command Register, this should be by default disabled on reset. So explicitly disable these bits at early setup of the Aardvark driver. Remove code which unconditionally enables all 3 bits and let kernel code (via pci_set_master() function) to handle bus mastering of Root PCIe Bridge via emulated PCI_COMMAND on emulated bridge. Link: https://lore.kernel.org/r/20211028185659.20329-5-kabel@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # b2a56469d550 ("PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Fix link trainingPali Rohár
commit f76b36d40beee0a13aa8f6aa011df0d7cbbb8a7f upstream. Fix multiple link training issues in aardvark driver. The main reason of these issues was misunderstanding of what certain registers do, since their names and comments were misleading: before commit 96be36dbffac ("PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros"), the pci-aardvark.c driver used custom macros for accessing standard PCIe Root Bridge registers, and misleading comments did not help to understand what the code was really doing. After doing more tests and experiments I've come to the conclusion that the SPEED_GEN register in aardvark sets the PCIe revision / generation compliance and forces maximal link speed. Both GEN3 and GEN2 values set the read-only PCI_EXP_FLAGS_VERS bits (PCIe capabilities version of Root Bridge) to value 2, while GEN1 value sets PCI_EXP_FLAGS_VERS to 1, which matches with PCI Express specifications revisions 3, 2 and 1 respectively. Changing SPEED_GEN also sets the read-only bits PCI_EXP_LNKCAP_SLS and PCI_EXP_LNKCAP2_SLS to corresponding speed. (Note that PCI Express rev 1 specification does not define PCI_EXP_LNKCAP2 and PCI_EXP_LNKCTL2 registers and when SPEED_GEN is set to GEN1 (which also sets PCI_EXP_FLAGS_VERS set to 1), lspci cannot access PCI_EXP_LNKCAP2 and PCI_EXP_LNKCTL2 registers.) Changing PCIe link speed can be done via PCI_EXP_LNKCTL2_TLS bits of PCI_EXP_LNKCTL2 register. Armada 3700 Functional Specifications says that the default value of PCI_EXP_LNKCTL2_TLS is based on SPEED_GEN value, but tests showed that the default value is always 8.0 GT/s, independently of speed set by SPEED_GEN. So after setting SPEED_GEN, we must also set value in PCI_EXP_LNKCTL2 register via PCI_EXP_LNKCTL2_TLS bits. Triggering PCI_EXP_LNKCTL_RL bit immediately after setting LINK_TRAINING_EN bit actually doesn't do anything. Tests have shown that a delay is needed after enabling LINK_TRAINING_EN bit. As triggering PCI_EXP_LNKCTL_RL currently does nothing, remove it. Commit 43fc679ced18 ("PCI: aardvark: Improve link training") introduced code which sets SPEED_GEN register based on negotiated link speed from PCI_EXP_LNKSTA_CLS bits of PCI_EXP_LNKSTA register. This code was added to fix detection of Compex WLE900VX (Atheros QCA9880) WiFi GEN1 PCIe cards, as otherwise these cards were "invisible" on PCIe bus (probably because they crashed). But apparently more people reported the same issues with these cards also with other PCIe controllers [1] and I was able to reproduce this issue also with other "noname" WiFi cards based on Atheros QCA9890 chip (with the same PCI vendor/device ids as Atheros QCA9880). So this is not an issue in aardvark but rather an issue in Atheros QCA98xx chips. Also, this issue only exists if the kernel is compiled with PCIe ASPM support, and a generic workaround for this is to change PCIe Bridge to 2.5 GT/s link speed via PCI_EXP_LNKCTL2_TLS_2_5GT bits in PCI_EXP_LNKCTL2 register [2], before triggering PCI_EXP_LNKCTL_RL bit. This workaround also works when SPEED_GEN is set to value GEN2 (5 GT/s). So remove this hack completely in the aardvark driver and always set SPEED_GEN to value from 'max-link-speed' DT property. Fix for Atheros QCA98xx chips is handled separately by patch [2]. These two things (code for triggering PCI_EXP_LNKCTL_RL bit and changing SPEED_GEN value) also explain why commit 6964494582f5 ("PCI: aardvark: Train link immediately after enabling training") somehow fixed detection of those problematic Compex cards with Atheros chips: if triggering link retraining (via PCI_EXP_LNKCTL_RL bit) was done immediately after enabling link training (via LINK_TRAINING_EN), it did nothing. If there was a specific delay, aardvark HW already initialized PCIe link and therefore triggering link retraining caused the above issue. Compex cards triggered link down event and disappeared from the PCIe bus. Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready before training link") added 100ms sleep before calling 'Start link training' command and explained that it is a requirement of PCI Express specification. But the code after this 100ms sleep was not doing 'Start link training', rather it triggered PCI_EXP_LNKCTL_RL bit via PCIe Root Bridge to put link into Recovery state. The required delay after fundamental reset is already done in function advk_pcie_wait_for_link() which also checks whether PCIe link is up. So after removing the code which triggers PCI_EXP_LNKCTL_RL bit on PCIe Root Bridge, there is no need to wait 100ms again. Remove the extra msleep() call and update comment about the delay required by the PCI Express specification. According to Marvell Armada 3700 Functional Specifications, Link training should be enabled via aardvark register LINK_TRAINING_EN after selecting PCIe generation and x1 lane. There is no need to disable it prior resetting card via PERST# signal. This disabling code was introduced in commit 5169a9851daa ("PCI: aardvark: Issue PERST via GPIO") as a workaround for some Atheros cards. It turns out that this also is Atheros specific issue and affects any PCIe controller, not only aardvark. Moreover this Atheros issue was triggered by juggling with PCI_EXP_LNKCTL_RL, LINK_TRAINING_EN and SPEED_GEN bits interleaved with sleeps. Now, after removing triggering PCI_EXP_LNKCTL_RL, there is no need to explicitly disable LINK_TRAINING_EN bit. So remove this code too. The problematic Compex cards described in previous git commits are correctly detected in advk_pcie_train_link() function even after applying all these changes. Note that with this patch, and also prior this patch, some NVMe disks which support PCIe GEN3 with 8 GT/s speed are negotiated only at the lowest link speed 2.5 GT/s, independently of SPEED_GEN value. After manually triggering PCI_EXP_LNKCTL_RL bit (e.g. from userspace via setpci), these NVMe disks change link speed to 5 GT/s when SPEED_GEN was configured to GEN2. This issue first needs to be properly investigated. I will send a fix in the future. On the other hand, some other GEN2 PCIe cards with 5 GT/s speed are autonomously by HW autonegotiated at full 5 GT/s speed without need of any software interaction. Armada 3700 Functional Specifications describes the following steps for link training: set SPEED_GEN to GEN2, enable LINK_TRAINING_EN, poll until link training is complete, trigger PCI_EXP_LNKCTL_RL, poll until signal rate is 5 GT/s, poll until link training is complete, enable ASPM L0s. The requirement for triggering PCI_EXP_LNKCTL_RL can be explained by the need to achieve 5 GT/s speed (as changing link speed is done by throw to recovery state entered by PCI_EXP_LNKCTL_RL) or maybe as a part of enabling ASPM L0s (but in this case ASPM L0s should have been enabled prior PCI_EXP_LNKCTL_RL). It is unknown why the original pci-aardvark.c driver was triggering PCI_EXP_LNKCTL_RL bit before waiting for the link to be up. This does not align with neither PCIe base specifications nor with Armada 3700 Functional Specification. (Note that in older versions of aardvark, this bit was called incorrectly PCIE_CORE_LINK_TRAINING, so this may be the reason.) It is also unknown why Armada 3700 Functional Specification says that it is needed to trigger PCI_EXP_LNKCTL_RL for GEN2 mode, as according to PCIe base specification 5 GT/s speed negotiation is supposed to be entirely autonomous, even if initial speed is 2.5 GT/s. [1] - https://lore.kernel.org/linux-pci/87h7l8axqp.fsf@toke.dk/ [2] - https://lore.kernel.org/linux-pci/20210326124326.21163-1-pali@kernel.org/ Link: https://lore.kernel.org/r/20211005180952.6812-12-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Simplify initialization of rootcap on virtual bridgePali Rohár
commit 454c53271fc11f3aa5e44e41fd99ca181bd32c62 upstream. PCIe config space can be initialized also before pci_bridge_emul_init() call, so move rootcap initialization after PCI config space initialization. This simplifies the function a little since it removes one if (ret < 0) check. Link: https://lore.kernel.org/r/20211005180952.6812-11-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Implement re-issuing config requests on CRS responsePali Rohár
commit 223dec14a05337a4155f1deed46d2becce4d00fd upstream. Commit 43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value") fixed handling of CRS response and when CRSSVE flag was not enabled it marked CRS response as failed transaction (due to simplicity). But pci-aardvark.c driver is already waiting up to the PIO_RETRY_CNT count for PIO config response and so we can with a small change implement re-issuing of config requests as described in PCIe base specification. This change implements re-issuing of config requests when response is CRS. Set upper bound of wait cycles to around PIO_RETRY_CNT, afterwards the transaction is marked as failed and an all-ones value is returned as before. We do this by returning appropriate error codes from function advk_pcie_check_pio_status(). On CRS we return -EAGAIN and caller then reissues transaction. Link: https://lore.kernel.org/r/20211005180952.6812-10-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Fix PCIe Max Payload Size settingPali Rohár
commit a4e17d65dafdd3513042d8f00404c9b6068a825c upstream. Change PCIe Max Payload Size setting in PCIe Device Control register to 512 bytes to align with PCIe Link Initialization sequence as defined in Marvell Armada 3700 Functional Specification. According to the specification, maximal Max Payload Size supported by this device is 512 bytes. Without this kernel prints suspicious line: pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 16384, max 512) With this change it changes to: pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 512, max 512) Link: https://lore.kernel.org/r/20211005180952.6812-3-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Configure PCIe resources from 'ranges' DT propertyPali Rohár
commit 64f160e19e9264a7f6d89c516baae1473b6f8359 upstream. In commit 6df6ba974a55 ("PCI: aardvark: Remove PCIe outbound window configuration") was removed aardvark PCIe outbound window configuration and commit description said that was recommended solution by HW designers. But that commit completely removed support for configuring PCIe IO resources without removing PCIe IO 'ranges' from DTS files. After that commit PCIe IO space started to be treated as PCIe MEM space and accessing it just caused kernel crash. Moreover implementation of PCIe outbound windows prior that commit was incorrect. It completely ignored offset between CPU address and PCIe bus address and expected that in DTS is CPU address always same as PCIe bus address without doing any checks. Also it completely ignored size of every PCIe resource specified in 'ranges' DTS property and expected that every PCIe resource has size 128 MB (also for PCIe IO range). Again without any check. Apparently none of PCIe resource has in DTS specified size of 128 MB. So it was completely broken and thanks to how aardvark mask works, configuration was completely ignored. This patch reverts back support for PCIe outbound window configuration but implementation is a new without issues mentioned above. PCIe outbound window is required when DTS specify in 'ranges' property non-zero offset between CPU and PCIe address space. To address recommendation by HW designers as specified in commit description of 6df6ba974a55, set default outbound parameters as PCIe MEM access without translation and therefore for this PCIe 'ranges' it is not needed to configure PCIe outbound window. For PCIe IO space is needed to configure aardvark PCIe outbound window. This patch fixes kernel crash when trying to access PCIe IO space. Link: https://lore.kernel.org/r/20210624215546.4015-2-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # 6df6ba974a55 ("PCI: aardvark: Remove PCIe outbound window configuration") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Update comment about disabling link trainingPali Rohár
commit 1d1cd163d0de22a4041a6f1aeabcf78f80076539 upstream. According to PCI Express Base Specifications (rev 4.0, 6.6.1 "Conventional reset"), after fundamental reset a 100ms delay is needed prior to enabling link training. Update comment in code to reflect this requirement. Link: https://lore.kernel.org/r/20201202184659.3795-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link()Pali Rohár
commit d0c6a3475b033960e85ae2bf176b14cab0a627d2 upstream. Move code which belongs to link training (delays and resets) into advk_pcie_train_link() function, so everything related to link training, including timings is at one place. After experiments it can be observed that link training in aardvark hardware is very sensitive to timings and delays, so it is a good idea to have this code at the same place as link training calls. This patch does not change behavior of aardvark initialization. Link: https://lore.kernel.org/r/20200907111038.5811-6-pali@kernel.org Tested-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Fix compilation on s390Pali Rohár
commit b32c012e4b98f0126aa327be2d1f409963057643 upstream. Include linux/gpio/consumer.h instead of linux/gpio.h, as is said in the latter file. This was reported by kernel test bot when compiling for s390. drivers/pci/controller/pci-aardvark.c:350:2: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-aardvark.c:1074:21: error: implicit declaration of function 'devm_gpiod_get_from_of_node' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-aardvark.c:1076:14: error: use of undeclared identifier 'GPIOD_OUT_LOW' Link: https://lore.kernel.org/r/202006211118.LxtENQfl%25lkp@intel.com Link: https://lore.kernel.org/r/20200907111038.5811-2-pali@kernel.org Fixes: 5169a9851daa ("PCI: aardvark: Issue PERST via GPIO") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Don't touch PCIe registers if no card connectedPali Rohár
commit 70e380250c3621c55ff218cbaf2272830d9dbb1d upstream. When there is no PCIe card connected and advk_pcie_rd_conf() or advk_pcie_wr_conf() is called for PCI bus which doesn't belong to emulated root bridge, the aardvark driver throws the following error message: advk-pcie d0070000.pcie: config read/write timed out Obviously accessing PCIe registers of disconnected card is not possible. Extend check in advk_pcie_valid_device() function for validating availability of PCIe bus. If PCIe link is down, then the device is marked as Not Found and the driver does not try to access these registers. This is just an optimization to prevent accessing PCIe registers when card is disconnected. Trying to access PCIe registers of disconnected card does not cause any crash, kernel just needs to wait for a timeout. So if card disappear immediately after checking for PCIe link (before accessing PCIe registers), it does not cause any problems. Link: https://lore.kernel.org/r/20200702083036.12230-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macrosPali Rohár
commit 96be36dbffacea0aa9e6ec4839583e79faa141a1 upstream. PCI-E capability macros are already defined in linux/pci_regs.h. Remove their reimplementation in pcie-aardvark. Link: https://lore.kernel.org/r/20200430080625.26070-9-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Issue PERST via GPIOPali Rohár
commit 5169a9851daaa2782a7bd2bb83d5b1bd224b2879 upstream. Add support for issuing PERST via GPIO specified in 'reset-gpios' property (as described in PCI device tree bindings). Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected after reboot when PERST is not issued during driver initialization. If bootloader already enabled link training then issuing PERST has no effect for some buggy cards (e.g. Compex WLE900VX) and these cards are not detected. We therefore clear the LINK_TRAINING_EN register before. It was observed that Compex WLE900VX card needs to be in PERST reset for at least 10ms if bootloader enabled link training. Tested on Turris MOX. Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Improve link trainingMarek Behún
commit 43fc679ced18006b12d918d7a8a4af392b7fbfe7 upstream. Currently the aardvark driver trains link in PCIe gen2 mode. This may cause some buggy gen1 cards (such as Compex WLE900VX) to be unstable or even not detected. Moreover when ASPM code tries to retrain link second time, these cards may stop responding and link goes down. If gen1 is used this does not happen. Unconditionally forcing gen1 is not a good solution since it may have performance impact on gen2 cards. To overcome this, read 'max-link-speed' property (as defined in PCI device tree bindings) and use this as max gen mode. Then iteratively try link training at this mode or lower until successful. After successful link training choose final controller gen based on Negotiated Link Speed from Link Status register, which should match card speed. Link: https://lore.kernel.org/r/20200430080625.26070-5-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Train link immediately after enabling trainingPali Rohár
commit 6964494582f56a3882c2c53b0edbfe99eb32b2e1 upstream. Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link training and starting link training causes detection issues with some buggy cards (such as Compex WLE900VX). Move the code which enables link training immediately before the one which starts link traning. This fixes detection issues of Compex WLE900VX card on Turris MOX after cold boot. Link: https://lore.kernel.org/r/20200430080625.26070-2-pali@kernel.org Fixes: f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready...") Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Fix big endian supportGrzegorz Jaszczyk
commit e078723f9cccd509482fd7f30a4afb1125ca7a2a upstream. Initialise every multiple-byte field of emulated PCI bridge config space with proper cpu_to_le* macro. This is required since the structure describing config space of emulated bridge assumes little-endian convention. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Wait for endpoint to be ready before training linkRemi Pommarel
commit f4c7d053d7f77cd5c1a1ba7c7ce085ddba13d1d7 upstream. When configuring pcie reset pin from gpio (e.g. initially set by u-boot) to pcie function this pin goes low for a brief moment asserting the PERST# signal. Thus connected device enters fundamental reset process and link configuration can only begin after a minimal 100ms delay (see [1]). Because the pin configuration comes from the "default" pinctrl it is implicitly configured before the probe callback is called: driver_probe_device() really_probe() ... pinctrl_bind_pins() /* Here pin goes from gpio to PCIE reset function and PERST# is asserted */ ... drv->probe() [1] "PCI Express Base Specification", REV. 4.0 PCI Express, February 19 2014, 6.6.1 Conventional Reset Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01PCI: aardvark: Deduplicate code in advk_pcie_rd_conf()Marek Behún
commit 67cb2a4c93499c2c22704998fd1fd2bc35194d8e upstream. Avoid code repetition in advk_pcie_rd_conf() by handling errors with goto jump, as is customary in kernel. Link: https://lore.kernel.org/r/20211005180952.6812-9-kabel@kernel.org Fixes: 43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17PCI: aardvark: Fix preserving PCI_EXP_RTCTL_CRSSVE flag on emulated bridgePali Rohár
[ Upstream commit d419052bc6c60fa4ab2b5a51d5f1e55a66e2b4ff ] Commit 43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value") started using CRSSVE flag for handling CRS responses. PCI_EXP_RTCTL_CRSSVE flag is stored only in emulated config space buffer and there is handler for PCI_EXP_RTCTL register. So every read operation from config space automatically clears CRSSVE flag as it is not defined in PCI_EXP_RTCTL read handler. Fix this by reading current CRSSVE bit flag from emulated space buffer and appending it to PCI_EXP_RTCTL read response. Link: https://lore.kernel.org/r/20211005180952.6812-5-kabel@kernel.org Fixes: 43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17PCI: aardvark: Don't spam about PIO Response StatusMarek Behún
[ Upstream commit 464de7e7fff767e87429cd7be09c4f2cb50a6ccb ] Use dev_dbg() instead of dev_err() in advk_pcie_check_pio_status(). For example CRS is not an error status, it just says that the request should be retried. Link: https://lore.kernel.org/r/20211005180952.6812-4-kabel@kernel.org Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17PCI: aardvark: Read all 16-bits from PCIE_MSI_PAYLOAD_REGMarek Behún
commit 95997723b6402cd6c53e0f9e7ac640ec64eaaff8 upstream. The PCIE_MSI_PAYLOAD_REG contains 16-bit MSI number, not only lower 8 bits. Fix reading content of this register and add a comment describing the access to this register. Link: https://lore.kernel.org/r/20211028185659.20329-4-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17PCI: aardvark: Fix return value of MSI domain .alloc() methodMarek Behún
commit e4313be1599d397625c14fb7826996813622decf upstream. MSI domain callback .alloc() (implemented by advk_msi_irq_domain_alloc() function) should return zero on success, since non-zero value indicates failure. When the driver was converted to generic MSI API in commit f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support"), it was converted so that it returns hwirq number. Fix this. Link: https://lore.kernel.org/r/20211028185659.20329-3-kabel@kernel.org Fixes: f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17PCI: aardvark: Fix reporting Data Link Layer Link ActivePali Rohár
commit 2b650b7ff20eb7ea8ef9031d20fb657286ab90cc upstream. Add support for reporting PCI_EXP_LNKSTA_DLLLA bit in Link Control register on emulated bridge via current LTSSM state. Also correctly indicate DLLLA capability via PCI_EXP_LNKCAP_DLLLARC bit in Link Control Capability register. Link: https://lore.kernel.org/r/20211005180952.6812-14-kabel@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17PCI: aardvark: Do not unmask unused interruptsPali Rohár
commit 1fb95d7d3c7a926b002fe8a6bd27a1cb428b46dc upstream. There are lot of undocumented interrupt bits. To prevent unwanted spurious interrupts, fix all *_ALL_MASK macros to define all interrupt bits, so that driver can properly mask all interrupts, including those which are undocumented. Link: https://lore.kernel.org/r/20211005180952.6812-8-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17PCI: aardvark: Fix checking for link up via LTSSM statePali Rohár
commit 661c399a651c11aaf83c45cbfe0b4a1fb7bc3179 upstream. Current implementation of advk_pcie_link_up() is wrong as it marks also link disabled or hot reset states as link up. Fix it by marking link up only to those states which are defined in PCIe Base specification 3.0, Table 4-14: Link Status Mapped to the LTSSM. To simplify implementation, Define macros for every LTSSM state which aardvark hardware can return in CFG_REG register. Fix also checking for link training according to the same Table 4-14. Define a new function advk_pcie_link_training() for this purpose. Link: https://lore.kernel.org/r/20211005180952.6812-13-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org Cc: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17PCI: aardvark: Do not clear status bits of masked interruptsPali Rohár
commit a7ca6d7fa3c02c032db5440ff392d96c04684c21 upstream. The PCIE_ISR1_REG says which interrupts are currently set / active, including those which are masked. The driver currently reads this register and looks if some unmasked interrupts are active, and if not, it clears status bits of _all_ interrupts, including the masked ones. This is incorrect, since, for example, some drivers may poll these bits. Remove this clearing, and also remove this early return statement completely, since it does not change functionality in any way. Link: https://lore.kernel.org/r/20211005180952.6812-7-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-08Merge remote-tracking branch 'fscl/5.4-2.3.x-imx' into toradex_5.4-2.3.x-imxDenys Drozdov
2021-09-27Merge tag 'v5.4.149' into 5.4-2.3.x-imxAndrey Zhizhikin
This is the 5.4.149 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2021-09-26PCI: aardvark: Fix reporting CRS valuePali Rohár
commit 43f5c77bcbd27cce70bf33c2b86d6726ce95dd66 upstream. Set CRSVIS flag in emulated root PCI bridge to indicate support for Completion Retry Status. Add check for CRSSVE flag from root PCI brige when issuing Configuration Read Request via PIO to correctly returns fabricated CRS value as it is required by PCIe spec. Link: https://lore.kernel.org/r/20210722144041.12661-5-pali@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # e0d9d30b7354 ("PCI: pci-bridge-emul: Fix big-endian support") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26PCI: aardvark: Indicate error in 'val' when config read failsPali Rohár
commit b1bd5714472cc72e14409f5659b154c765a76c65 upstream. Most callers of config read do not check for return value. But most of the ones that do, checks for error indication in 'val' variable. This patch updates error handling in advk_pcie_rd_conf() function. If PIO transfer fails then 'val' variable is set to 0xffffffff which indicates failture. Link: https://lore.kernel.org/r/20200528162604.GA323482@bjorn-Precision-5520 Link: https://lore.kernel.org/r/20200601130315.18895-1-pali@kernel.org Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22Merge tag 'v5.4.148' into 5.4-2.3.x-imxAndrey Zhizhikin
This is the 5.4.148 stable release Conflicts: - drivers/dma/imx-sdma.c: Following upstream patches are already applied to NXP tree: 7cfbf391e870 ("dmaengine: imx-sdma: remove duplicated sdma_load_context") 788122c99d85 ("Revert "dmaengine: imx-sdma: refine to load context only once"") - drivers/usb/chipidea/host.c: Merge upstream commit a18cfd715e91 ("usb: chipidea: host: fix port index underflow and UBSAN complains") to NXP version. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2021-09-22PCI: aardvark: Fix masking and unmasking legacy INTx interruptsPali Rohár
commit d212dcee27c1f89517181047e5485fcbba4a25c2 upstream. irq_mask and irq_unmask callbacks need to be properly guarded by raw spin locks as masking/unmasking procedure needs atomic read-modify-write operation on hardware register. Link: https://lore.kernel.org/r/20210820155020.3000-1-pali@kernel.org Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22PCI: aardvark: Increase polling delay to 1.5s while waiting for PIO responsePali Rohár
commit 02bcec3ea5591720114f586960490b04b093a09e upstream. Measurements in different conditions showed that aardvark hardware PIO response can take up to 1.44s. Increase wait timeout from 1ms to 1.5s to ensure that we do not miss responses from hardware. After 1.44s hardware returns errors (e.g. Completer abort). The previous two patches fixed checking for PIO status, so now we can use it to also catch errors which are reported by hardware after 1.44s. After applying this patch, kernel can detect and print PIO errors to dmesg: [ 6.879999] advk-pcie d0070000.pcie: Non-posted PIO Response Status: CA, 0xe00 @ 0x100004 [ 6.896436] advk-pcie d0070000.pcie: Posted PIO Response Status: COMP_ERR, 0x804 @ 0x100004 [ 6.913049] advk-pcie d0070000.pcie: Posted PIO Response Status: COMP_ERR, 0x804 @ 0x100010 [ 6.929663] advk-pcie d0070000.pcie: Non-posted PIO Response Status: CA, 0xe00 @ 0x100010 [ 6.953558] advk-pcie d0070000.pcie: Posted PIO Response Status: COMP_ERR, 0x804 @ 0x100014 [ 6.970170] advk-pcie d0070000.pcie: Non-posted PIO Response Status: CA, 0xe00 @ 0x100014 [ 6.994328] advk-pcie d0070000.pcie: Posted PIO Response Status: COMP_ERR, 0x804 @ 0x100004 Without this patch kernel prints only a generic error to dmesg: [ 5.246847] advk-pcie d0070000.pcie: config read/write timed out Link: https://lore.kernel.org/r/20210722144041.12661-3-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # 7fbcb5da811b ("PCI: aardvark: Don't rely on jiffies while holding spinlock") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22PCI: aardvark: Fix checking for PIO statusEvan Wang
commit fcb461e2bc8b83b7eaca20cb2221e8b940f2189c upstream. There is an issue that when PCIe switch is connected to an Armada 3700 board, there will be lots of warnings about PIO errors when reading the config space. According to Aardvark PIO read and write sequence in HW specification, the current way to check PIO status has the following issues: 1) For PIO read operation, it reports the error message, which should be avoided according to HW specification. 2) For PIO read and write operations, it only checks PIO operation complete status, which is not enough, and error status should also be checked. This patch aligns the code with Aardvark PIO read and write sequence in HW specification on PIO status check and fix the warnings when reading config space. [pali: Fix CRS handling when CRSSVE is not enabled] Link: https://lore.kernel.org/r/20210722144041.12661-2-pali@kernel.org Tested-by: Victor Gu <xigu@marvell.com> Signed-off-by: Evan Wang <xswang@marvell.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Victor Gu <xigu@marvell.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # b1bd5714472c ("PCI: aardvark: Indicate error in 'val' when config read fails") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22PCI: xilinx-nwl: Enable the clock through CCFHyun Kwon
commit de0a01f5296651d3a539f2d23d0db8f359483696 upstream. Enable PCIe reference clock. There is no remove function that's why this should be enough for simple operation. Normally this clock is enabled by default by firmware but there are usecases where this clock should be enabled by driver itself. It is also good that PCIe clock is recorded in a clock framework. Link: https://lore.kernel.org/r/ee6997a08fab582b1c6de05f8be184f3fe8d5357.1624618100.git.michal.simek@xilinx.com Fixes: ab597d35ef11 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller") Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05Merge tag 'v5.4.138' into 5.4-2.3.x-imxAndrey Zhizhikin
This is the 5.4.138 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2021-08-04PCI: mvebu: Setup BAR0 in order to fix MSIShmuel Hazan
commit 216f8e95aacc8e9690d8e2286c472671b65f4128 upstream. According to the Armada XP datasheet, section 10.2.6: "in order for the device to do a write to the MSI doorbell address, it needs to write to a register in the internal registers space". As a result of the requirement above, without this patch, MSI won't function and therefore some devices won't operate properly without pci=nomsi. This requirement was not present at the time of writing this driver since the vendor u-boot always initializes all PCIe controllers (incl. BAR0 initialization) and for some time, the vendor u-boot was the only available bootloader for this driver's SoCs (e.g. A38x,A37x, etc). Tested on an Armada 385 board on mainline u-boot (2020.4), without u-boot PCI initialization and the following PCIe devices: - Wilocity Wil6200 rev 2 (wil6210) - Qualcomm Atheros QCA6174 (ath10k_pci) Both failed to get a response from the device after loading the firmware and seem to operate properly with this patch. Link: https://lore.kernel.org/r/20200623060334.108444-1-sh@tkos.co.il Signed-off-by: Shmuel Hazan <sh@tkos.co.il> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20Merge tag 'v5.4.134' into 5.4-2.3.x-imxAndrey Zhizhikin
This is the 5.4.134 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2021-07-20Merge tag 'v5.4.133' into 5.4-2.3.x-imxAndrey Zhizhikin
This is the 5.4.133 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-14 19:56:17 +0000