summaryrefslogtreecommitdiff
path: root/drivers/pci/host
AgeCommit message (Collapse)Author
2018-02-28PCI: keystone: Fix interrupt-controller-node lookupJohan Hovold
commit eac56aa3bc8af3d9b9850345d0f2da9d83529134 upstream. Fix child-node lookup during initialisation which was using the wrong OF-helper and ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent pci node could end up being prematurely freed as of_find_node_by_name() drops a reference to its first argument. Any matching child interrupt-controller node was also leaked. Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver") Cc: stable <stable@vger.kernel.org> # 3.18 Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> [lorenzo.pieralisi@arm.com: updated commit subject] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [johan: backport to 4.4] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31PCI: layerscape: Fix MSG TLP drop settingMinghuan Lian
commit 1195c103f6c98d9ff381cac3a8760d4f8a133627 upstream. Some kinds of Layerscape PCIe controllers will forward the received message TLPs to system application address space, which could corrupt system memory or lead to a system hang. Enable MSG_DROP to fix this issue. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31PCI: layerscape: Add "fsl,ls2085a-pcie" compatible IDYang Shi
commit dbae40b76abef2f8a7e7bf1701f77df9e73def48 upstream. The Layerscape PCI host driver must recognize ls2085a compatible when using firmware with ls2085a compatible property, otherwise the PCI bus won't be detected even though ls2085a compatible is included by the dts. Signed-off-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15PCI: mvebu: Handle changes to the bridge windows while enabledJason Gunthorpe
[ Upstream commit d9bf28e2650fe3eeefed7e34841aea07d10c6543 ] The PCI core will write to the bridge window config multiple times while they are enabled. This can lead to mbus failures like this: mvebu_mbus: cannot add window '4:e8', conflicts with another window mvebu-pcie mbus:pex@e0000000: Could not create MBus window at [mem 0xe0000000-0xe00fffff]: -22 For me this is happening during a hotplug cycle. The PCI core is not changing the values, just writing them twice while active. The patch addresses the general case of any change to an active window, but not atomically. The code is slightly refactored so io and mem can share more of the window logic. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-09PCI: keystone: Fix MSI code that retrieves struct pcie_port pointerMurali Karicheri
commit 79e3f4a853ed161cd4c06d84b50beebf961a47c6 upstream. Commit cbce7900598c ("PCI: designware: Make driver arch-agnostic") changed the host bridge sysdata pointer from the ARM pci_sys_data to the DesignWare pcie_port structure, and changed pcie-designware.c to reflect that. But it did not change the corresponding code in pci-keystone-dw.c, so it caused crashes on Keystone: Unable to handle kernel NULL pointer dereference at virtual address 00000030 pgd = c0003000 [00000030] *pgd=80000800004003, *pmd=00000000 Internal error: Oops: 206 [#1] PREEMPT SMP ARM CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.2-00139-gb74f926 #2 Hardware name: Keystone PC is at ks_dw_pcie_msi_irq_unmask+0x24/0x58 Change pci-keystone-dw.c to expect sysdata to be the struct pcie_port pointer. [bhelgaas: changelog] Fixes: cbce7900598c ("PCI: designware: Make driver arch-agnostic") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-17PCI: host: Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREADGrygorii Strashko
commit 8ff0ef996ca00028519c70e8d51d32bd37eb51dc upstream. On -RT and if kernel is booting with "threadirqs" cmd line parameter, PCIe/PCI (MSI) IRQ cascade handlers (like dra7xx_pcie_msi_irq_handler()) will be forced threaded and, as result, will generate warnings like this: WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu+0x14c/0x174() irq 460 handler irq_default_primary_handler+0x0/0x14 enabled interrupts Backtrace: (warn_slowpath_common) from (warn_slowpath_fmt+0x38/0x40) (warn_slowpath_fmt) from (handle_irq_event_percpu+0x14c/0x174) (handle_irq_event_percpu) from (handle_irq_event+0x84/0xb8) (handle_irq_event) from (handle_simple_irq+0x90/0x118) (handle_simple_irq) from (generic_handle_irq+0x30/0x44) (generic_handle_irq) from (dra7xx_pcie_msi_irq_handler+0x7c/0x8c) (dra7xx_pcie_msi_irq_handler) from (irq_forced_thread_fn+0x28/0x5c) (irq_forced_thread_fn) from (irq_thread+0x128/0x204) This happens because all of them invoke generic_handle_irq() from the requested handler. generic_handle_irq() grabs raw_locks and thus needs to run in raw-IRQ context. This issue was originally reproduced on TI dra7-evem, but, as was identified during discussion [1], other hosts can also suffer from this issue. Fix all them at once by marking PCIe/PCI (MSI) IRQ cascade handlers IRQF_NO_THREAD explicitly. [1] http://lkml.kernel.org/r/1448027966-21610-1-git-send-email-grygorii.strashko@ti.com [bhelgaas: add stable tag, fix typos] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Jingoo Han <jingoohan1@gmail.com> CC: Kukjin Kim <kgene@kernel.org> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> CC: Richard Zhu <Richard.Zhu@freescale.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Alexandre Courbot <gnurou@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Pratyush Anand <pratyush.anand@gmail.com> CC: Michal Simek <michal.simek@xilinx.com> CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com> CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-08PCI: dra7xx: Mark driver as brokenRichard Cochran
Mark the dra7xx PCI host driver as broken. This driver was first merged in v3.17 and has never worked. Although the driver compiles just fine, it is missing an essential device reset. If the driver is included, the kernel locks up hard shortly after booting, before any console output appears. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-12-04PCI: hisi: Fix hisi_pcie_cfg_read() 32-bit readsDongdong Liu
For 32-bit config reads (size == 4), hisi_pcie_cfg_read() returned success but never filled in the data we read. Return the register data for 32-bit config reads. Without this fix, PCI doesn't work at all because enumeration depends on 32-bit config reads. The driver was tested internally, but got broken in the process of upstreaming, so this fixes the breakage. Fixes: 500a1d9a43e0 ("PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver") Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
2015-12-04PCI: altera: Fix error when INTx is 4Ley Foon Tan
PCI interrupt lines start at 1, not at 0. So, creates additional one interrupt when register for irq domain. Error when PCIe devices have 4 INTx: WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:280 irq_domain_associate+0x17c/0x1cc() error: hwirq 0x4 is too large for dummy Tested on Ethernet adapter card with multi-functions. Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-12-04PCI: altera: Check TLP completion statusLey Foon Tan
Check TLP packet successful completion status. This fix the issue when accessing multi-function devices in enumeration process, TLP will return error when accessing non-exist function number. Returns PCI error code instead of generic errno. Tested on Ethernet adapter card with multi-functions. [bhelgaas: simplify completion status checking code] Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-12-04PCI: altera: Fix Requester ID for config accessesLey Foon Tan
The Requester ID should use the Root Port devfn and it should be always 0. Previously we constructed the Requester ID using the *Completer* devfn, i.e., the devfn of the Function we expect to respond to the config access. This causes issues when accessing configuration space for devices other than the Root Port. Build the Requester ID using the Root Port devfn. Tested on Ethernet adapter card with multi-functions. Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-12-04PCI: altera: Fix loop in tlp_read_packet()Dan Carpenter
TLP_LOOP is 500 and the "loop" variable was a u8 so "loop < TLP_LOOP" is always true. We only need this condition to work if there is a problem so it would have been easy to miss this in testing. Make it a normal for loop with "int i" instead of over thinking things and making it complicated. Fixes: 6bb4dd154ae8 ("PCI: altera: Add Altera PCIe host controller driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ley Foon Tan <lftan@altera.com>
2015-11-24PCI: hisi: Fix deferred probingArnd Bergmann
The hisi_pcie_probe() function is incorrectly marked as __init, as Kconfig tells us: WARNING: drivers/pci/host/built-in.o(.data+0x7780): Section mismatch in reference from the variable hisi_pcie_driver to the function .init.text:hisi_pcie_probe() If the probe for this device gets deferred past the point where __init functions are removed, or the device is unbound and then reattached to the driver, we branch into uninitialized memory, which is bad. Remove the __init annotation from hisi_pcie_probe() and hisi_add_pcie_port(). Fixes: 500a1d9a43e0 ("PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
2015-11-24PCI: designware: Remove incorrect io_base assignmentStanimir Varbanov
"pp->io" is an I/O resource, e.g., "[io 0x0000-0xffff]"; "pp->io_base" is the CPU physical address of a region where the host bridge converts CPU memory accesses into PCI I/O transactions. Corrupting pp->io_base by assigning pp->io->start to it breaks access to the PCI I/O space, as reported by Kishon. Remove the invalid assignment. [bhelgaas: changelog] Fixes: 0021d22b73d6 ("PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT") Reported-and-tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2015-11-06Merge tag 'pci-v4.4-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Resource management: - Add support for Enhanced Allocation devices (Sean O. Stalley) - Add Enhanced Allocation register entries (Sean O. Stalley) - Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney) - Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney) - Handle Enhanced Allocation capability for SR-IOV devices (David Daney) - Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas) - Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas) - Expand Enhanced Allocation BAR output (Bjorn Helgaas) - Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier) - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Add sparc mem64 resource parsing for root bus (Yinghai Lu) PCI device hotplug: - pciehp: Queue power work requests in dedicated function (Guenter Roeck) Driver binding: - Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker) Virtualization: - Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck) - Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck) - Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck) - Reorder pcibios_sriov_disable() (Alexander Duyck) - Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck) - Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck) - Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton) - Don't try to restore VF BARs (Wei Yang) MSI: - Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel) - Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach) - Export all remapped MSIs to sysfs attributes (Romain Bezut) - Disable MSI on SiS 761 (Ondrej Zary) AER: - Clear error status registers during enumeration and restore (Taku Izumi) Generic host bridge driver: - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Allow multiple hosts with different map_bus() methods (David Daney) - Pass starting bus number to pci_scan_root_bus() (David Daney) - Fix address window calculation for non-zero starting bus (David Daney) Altera host bridge driver: - Add msi.h to ARM Kbuild (Ley Foon Tan) - Add Altera PCIe host controller driver (Ley Foon Tan) - Add Altera PCIe MSI driver (Ley Foon Tan) APM X-Gene host bridge driver: - Remove msi_controller assignment (Duc Dang) Broadcom iProc host bridge driver: - Fix header comment "Corporation" misspelling (Florian Fainelli) - Fix code comment to match code (Ray Jui) - Remove unused struct iproc_pcie.irqs[] (Ray Jui) - Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui) - Fix PCIe reset logic (Ray Jui) - Improve link detection logic (Ray Jui) - Update PCIe device tree bindings (Ray Jui) - Add outbound mapping support (Ray Jui) Freescale i.MX6 host bridge driver: - Return real error code from imx6_add_pcie_port() (Fabio Estevam) - Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam) Freescale Layerscape host bridge driver: - Remove ls_pcie_establish_link() (Minghuan Lian) - Ignore PCIe controllers in Endpoint mode (Minghuan Lian) - Factor out SCFG related function (Minghuan Lian) - Update ls_add_pcie_port() (Minghuan Lian) - Remove unused fields from struct ls_pcie (Minghuan Lian) - Add support for LS1043a and LS2080a (Minghuan Lian) - Add ls_pcie_msi_host_init() (Minghuan Lian) HiSilicon host bridge driver: - Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang) Marvell MVEBU host bridge driver: - Return zero for reserved or unimplemented config space (Russell King) - Use exact config access size; don't read/modify/write (Russell King) - Use of_get_available_child_count() (Russell King) - Use for_each_available_child_of_node() to walk child nodes (Russell King) - Report full node name when reporting a DT error (Russell King) - Use port->name rather than "PCIe%d.%d" (Russell King) - Move port parsing and resource claiming to separate function (Russell King) - Fix memory leaks and refcount leaks (Russell King) - Split port parsing and resource claiming from port setup (Russell King) - Use gpio_set_value_cansleep() (Russell King) - Use devm_kcalloc() to allocate an array (Russell King) - Use gpio_desc to carry around gpio (Russell King) - Improve clock/reset handling (Russell King) - Add PCI Express root complex capability block (Russell King) - Remove code restricting accesses to slot 0 (Russell King) NVIDIA Tegra host bridge driver: - Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel) Renesas R-Car host bridge driver: - Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven) - Build pcie-rcar.c only on ARM (Geert Uytterhoeven) - Make PCI aware of the I/O resources (Phil Edworthy) - Remove dependency on ARM-specific struct hw_pci (Phil Edworthy) - Set root bus nr to that provided in DT (Phil Edworthy) - Fix I/O offset for multiple host bridges (Phil Edworthy) ST Microelectronics SPEAr13xx host bridge driver: - Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni) Synopsys DesignWare host bridge driver: - Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma) - Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni) - Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni) - Require config accesses to be naturally aligned (Gabriele Paoloni) - Make "num-lanes" an optional DT property (Gabriele Paoloni) - Move calculation of bus addresses to DRA7xx (Gabriele Paoloni) - Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni) - Factor out MSI msg setup (Lucas Stach) - Implement multivector MSI IRQ setup (Lucas Stach) - Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach) - Set up high part of MSI target address (Lucas Stach) - Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang) - Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang) - Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang) - Make driver arch-agnostic (Zhou Wang) Miscellaneous: - Make x86 pci_subsys_init() static (Alexander Kuleshov) - Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)" * tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: altera: Add Altera PCIe MSI driver PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver PCI: layerscape: Add ls_pcie_msi_host_init() PCI: layerscape: Add support for LS1043a and LS2080a PCI: layerscape: Remove unused fields from struct ls_pcie PCI: layerscape: Update ls_add_pcie_port() PCI: layerscape: Factor out SCFG related function PCI: layerscape: Ignore PCIe controllers in Endpoint mode PCI: layerscape: Remove ls_pcie_establish_link() PCI: designware: Make "clocks" and "clock-names" optional DT properties PCI: designware: Make driver arch-agnostic ARM/PCI: Replace pci_sys_data->align_resource with global function pointer PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT Revert "PCI: designware: Program ATU with untranslated address" PCI: designware: Move calculation of bus addresses to DRA7xx PCI: designware: Make "num-lanes" an optional DT property PCI: designware: Require config accesses to be naturally aligned PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces PCI: designware: Use exact access size in dw_pcie_cfg_read() PCI: spear: Fix dw_pcie_cfg_read/write() usage ...
2015-11-03Merge branch 'pci/host-layerscape' into nextBjorn Helgaas
* pci/host-layerscape: PCI: layerscape: Add ls_pcie_msi_host_init() PCI: layerscape: Add support for LS1043a and LS2080a PCI: layerscape: Remove unused fields from struct ls_pcie PCI: layerscape: Update ls_add_pcie_port() PCI: layerscape: Factor out SCFG related function PCI: layerscape: Ignore PCIe controllers in Endpoint mode PCI: layerscape: Remove ls_pcie_establish_link()
2015-11-03Merge branch 'pci/host-hisi' into nextBjorn Helgaas
* pci/host-hisi: PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver
2015-11-03Merge branches 'pci/host-altera', 'pci/host-designware', 'pci/host-generic', ↵Bjorn Helgaas
'pci/host-imx6', 'pci/host-iproc', 'pci/host-mvebu', 'pci/host-rcar', 'pci/host-tegra' and 'pci/host-xgene' into next * pci/host-altera: PCI: altera: Add Altera PCIe MSI driver PCI: altera: Add Altera PCIe host controller driver ARM: Add msi.h to Kbuild * pci/host-designware: PCI: designware: Make "clocks" and "clock-names" optional DT properties PCI: designware: Make driver arch-agnostic ARM/PCI: Replace pci_sys_data->align_resource with global function pointer PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT Revert "PCI: designware: Program ATU with untranslated address" PCI: designware: Move calculation of bus addresses to DRA7xx PCI: designware: Make "num-lanes" an optional DT property PCI: designware: Require config accesses to be naturally aligned PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces PCI: designware: Use exact access size in dw_pcie_cfg_read() PCI: spear: Fix dw_pcie_cfg_read/write() usage PCI: designware: Set up high part of MSI target address PCI: designware: Make get_msi_addr() return phys_addr_t, not u32 PCI: designware: Implement multivector MSI IRQ setup PCI: designware: Factor out MSI msg setup PCI: Add msi_controller setup_irqs() method for special multivector setup PCI: designware: Fix PORT_LOGIC_LINK_WIDTH_MASK * pci/host-generic: PCI: generic: Fix address window calculation for non-zero starting bus PCI: generic: Pass starting bus number to pci_scan_root_bus() PCI: generic: Allow multiple hosts with different map_bus() methods arm64: dts: Drop linux,pci-probe-only from the Seattle DTS powerpc/PCI: Fix lookup of linux,pci-probe-only property PCI: generic: Fix lookup of linux,pci-probe-only property of/pci: Add of_pci_check_probe_only to parse "linux,pci-probe-only" * pci/host-imx6: PCI: imx6: Add PCIE_PHY_RX_ASIC_OUT_VALID definition PCI: imx6: Return real error code from imx6_add_pcie_port() * pci/host-iproc: PCI: iproc: Fix header comment "Corporation" misspelling PCI: iproc: Add outbound mapping support PCI: iproc: Update PCIe device tree bindings PCI: iproc: Improve link detection logic PCI: iproc: Fix PCIe reset logic PCI: iproc: Call pci_fixup_irqs() for ARM64 as well as ARM PCI: iproc: Remove unused struct iproc_pcie.irqs[] PCI: iproc: Fix code comment to match code * pci/host-mvebu: PCI: mvebu: Remove code restricting accesses to slot 0 PCI: mvebu: Add PCI Express root complex capability block PCI: mvebu: Improve clock/reset handling PCI: mvebu: Use gpio_desc to carry around gpio PCI: mvebu: Use devm_kcalloc() to allocate an array PCI: mvebu: Use gpio_set_value_cansleep() PCI: mvebu: Split port parsing and resource claiming from port setup PCI: mvebu: Fix memory leaks and refcount leaks PCI: mvebu: Move port parsing and resource claiming to separate function PCI: mvebu: Use port->name rather than "PCIe%d.%d" PCI: mvebu: Report full node name when reporting a DT error PCI: mvebu: Use for_each_available_child_of_node() to walk child nodes PCI: mvebu: Use of_get_available_child_count() PCI: mvebu: Use exact config access size; don't read/modify/write PCI: mvebu: Return zero for reserved or unimplemented config space * pci/host-rcar: PCI: rcar: Fix I/O offset for multiple host bridges PCI: rcar: Set root bus nr to that provided in DT PCI: rcar: Remove dependency on ARM-specific struct hw_pci PCI: rcar: Make PCI aware of the I/O resources PCI: rcar: Build pcie-rcar.c only on ARM PCI: rcar: Build pci-rcar-gen2.c only on ARM * pci/host-tegra: PCI: tegra: Wrap static pgprot_t initializer with __pgprot() * pci/host-xgene: PCI/MSI: xgene: Remove msi_controller assignment
2015-11-03PCI: altera: Add Altera PCIe MSI driverLey Foon Tan
Add Altera PCIe MSI driver. This soft IP supports a configurable number of vectors, which is a DTS parameter. [bhelgaas: Kconfig depend on PCIE_ALTERA, typos, whitespace] Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2015-11-02PCI: hisi: Add HiSilicon SoC Hip05 PCIe driverZhou Wang
Add PCIe host support for HiSilicon SoC Hip05, related DT binding documentation, and maintainer update. [bhelgaas: changelog, 32-bit only config write warning text] Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: liudongdong <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org> (DT binding)
2015-11-02PCI: layerscape: Add ls_pcie_msi_host_init()Minghuan Lian
Layerscape PCIe has its own MSI implementation. Register ls_pcie_msi_host_init() to avoid using DesignWare's MSI. [bhelgaas: add comment] Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: layerscape: Add support for LS1043a and LS2080aMinghuan Lian
Both LS1043a and LS2080a are based on ARMv8 64-bit architecture and have similar PCIe implementation. LUT is added to controller. Add LS1043a and LS2080a support. [bhelgaas: move unused field removal into separate patch, include DT update] Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> (DT update) Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> (DT update)
2015-11-02PCI: layerscape: Remove unused fields from struct ls_pcieMinghuan Lian
Removed unused node, dev, and bus fields from struct ls_pcie. [bhelgaas: split into separate patch] Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: layerscape: Update ls_add_pcie_port()Minghuan Lian
Update the ls_add_pcie_port() signature to keep it consistent with the other DesignWare-based host drivers. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: layerscape: Factor out SCFG related functionMinghuan Lian
For the LS1021a PCIe controller, some status registers are located in SCFG, unlike other Layerscape devices. Move SCFG-related code to ls1021_pcie_host_init() and rename ls_pcie_link_up() to ls1021_pcie_link_up() because LTSSM status is also in SCFG. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: layerscape: Ignore PCIe controllers in Endpoint modeMinghuan Lian
Layerscape PCIe controller supports root complex (RC) and endpoint (EP) modes, which can be set by RCW. If not in RC mode, return -ENODEV without claiming the controller. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: layerscape: Remove ls_pcie_establish_link()Minghuan Lian
ls_pcie_establish_link() does not do any real operation, except to wait for the linkup establishment. In fact, this is not necessary. Moreover, each PCIe controller not inserted device will increase the Linux startup time about 200ms. Remove ls_pcie_establish_link(). Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: designware: Make driver arch-agnosticZhou Wang
Previously, dw_pcie_host_init() created the PCI host bridge with pci_common_init_dev(), an ARM-specific function that supplies the ARM- specific pci_sys_data structure as the PCI "sysdata". Make pcie-designware.c arch-agnostic by reimplementing the functionality of pci_common_init_dev() directly in dw_pcie_host_init(). Note that this changes the bridge sysdata from the ARM pci_sys_data to the DesignWare pcie_port structure. This doesn't affect the ARM sysdata users because they are all specific to non-DesignWare host bridges, which will still have pci_sys_data. [bhelgaas: changelog] Tested-by: James Morse <james.morse@arm.com> Tested-by: Gabriel Fernandez <gabriel.fernandez@st.com> Tested-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-11-02PCI: designware: Use of_pci_get_host_bridge_resources() to parse DTZhou Wang
Use the new of_pci_get_host_bridge_resources() API in place of the PCI OF DT parser. [bhelgaas: changelog] Tested-by: James Morse <james.morse@arm.com> Tested-by: Gabriel Fernandez <gabriel.fernandez@st.com> Tested-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-11-02Revert "PCI: designware: Program ATU with untranslated address"Zhou Wang
Revert f4c55c5a3f7f ("PCI: designware: Program ATU with untranslated address"). Note that dra7xx_pcie_host_init() now modifies pp->io_base, but we still need the original value for dw_pcie_setup() in the path below, so this adds a new io_base_tmp member. It will be removed later when dw_pcie_setup() is removed. dra7xx_add_pcie_port dw_pcie_host_init pp->io_base = range.cpu_addr pp->io_base_tmp = range.cpu_addr # <-- added pp->ops->host_init dra7xx_pcie_host_init # ops->host_init pp->io_base &= DRA7XX_CPU_TO_BUS_ADDR # <-- modified pci_common_init_dev(..., &dw_pci) pcibios_init_hw hw->setup dw_pcie_setup # hw_pci.setup pci_ioremap_io(..., pp->io_base_tmp) # <-- original addr required [bhelgaas: changelog] Tested-by: James Morse <james.morse@arm.com> Tested-by: Gabriel Fernandez <gabriel.fernandez@st.com> Tested-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-11-02PCI: designware: Move calculation of bus addresses to DRA7xxGabriele Paoloni
Commit f4c55c5a3f7f ("PCI: designware: Program ATU with untranslated address") added the calculation of PCI bus addresses in pcie-designware.c, storing them in new fields added in struct pcie_port. This calculation is done for every DesignWare user even though it only applies to DRA7xx. Move the calculation of the bus addresses to the DRA7xx driver to allow the rework of DesignWare to use the new DT parsing API. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-11-02PCI: designware: Make "num-lanes" an optional DT propertyGabriele Paoloni
Currently "num-lanes" is read in dw_pcie_host_init(), but it is only used if we call dw_pcie_setup_rc() while bringing up the link. If the link has already been brought up by firmware, we need not call dw_pcie_setup_rc(), and "num-lanes" is unnecessary. Only complain about "num-lanes" if we actually need it and we didn't find a valid value. [bhelgaas: changelog] Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: designware: Require config accesses to be naturally alignedGabriele Paoloni
Add sanity checks on "addr" input parameter in dw_pcie_cfg_read() and dw_pcie_cfg_write(). These checks make sure that accesses are aligned on their size, e.g., a 4-byte config access is aligned on a 4-byte boundary. [bhelgaas: changelog, set *val = 0 in failure case] Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-11-02PCI: designware: Simplify dw_pcie_cfg_read/write() interfacesGabriele Paoloni
Callers of dw_pcie_cfg_read() and dw_pcie_cfg_write() previously had to split the address into "addr" and "where". The callees assumed "addr" was 32-bit aligned (with zeros in the low two bits) and they used only the low two bits of "where". Accept the entire address in "addr" and drop the now-redundant "where" argument. As an example, this replaces this: int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val) *val = readb(addr + (where & 1)); with this: int dw_pcie_cfg_read(void __iomem *addr, int size, u32 *val) *val = readb(addr): [bhelgaas: changelog, split access size change to separate patch] Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: designware: Use exact access size in dw_pcie_cfg_read()Gabriele Paoloni
dw_pcie_cfg_write() uses the exact 8-, 16-, or 32-bit access size requested, but dw_pcie_cfg_read() previously performed a 32-bit read and masked out the bits requested. Use the exact access size in dw_pcie_cfg_read(). For example, if we want an 8-bit read, use readb() instead of using readl() and masking out the 8 bits we need. This makes it symmetric with dw_pcie_cfg_write(). [bhelgaas: split into separate patch, set *val = 0 in failure case] Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02PCI: spear: Fix dw_pcie_cfg_read/write() usageGabriele Paoloni
The first argument of dw_pcie_cfg_read/write() is a 32-bit aligned address. The second argument is the byte offset into a 32-bit word, and dw_pcie_cfg_read/write() only look at the low two bits. SPEAr13xx used dw_pcie_cfg_read() and dw_pcie_cfg_write() incorrectly: it passed important address bits in the second argument, where they were ignored. Pass the complete 32-bit word address in the first argument and only the 2-bit offset into that word in the second argument. Without this fix, SPEAr13xx host will never work with few buggy gen1 card which connects with only gen1 host and also with any endpoint which would generate a read request of more than 128 bytes. [bhelgaas: changelog] Reported-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.17+
2015-11-02PCI: designware: Set up high part of MSI target addressLucas Stach
Set up the high part of the MSI target address to allow the MSI target to be above 4GB on 64bit and PAE systems. [bhelgaas: changelog] Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-10-30PCI: rcar: Fix I/O offset for multiple host bridgesPhil Edworthy
Fix I/O offset for multiple host bridges. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-30PCI: rcar: Set root bus nr to that provided in DTPhil Edworthy
On ARM64, setting the root bus number to -1 causes probe failure. Moreover, we should use the bus number specified in the DT as we could have multiple PCIe controllers with different bus ranges. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-30PCI: rcar: Remove dependency on ARM-specific struct hw_pciPhil Edworthy
The R-Car PCIe host controller driver uses pci_common_init_dev(), which is ARM-specific and requires the ARM struct hw_pci. The part of pci_common_init_dev() that is needed is limited and can be done here without using hw_pci. Note that the ARM pcibios functions expect the PCI sysdata to be a pointer to a struct pci_sys_data. Add a struct pci_sys_data as the first element in struct gen_pci so that when we use a gen_pci pointer as sysdata, it is also a pointer to a struct pci_sys_data. Create and scan the root bus directly without using the ARM pci_common_init_dev() interface. Based on 499733e0cc1a ("PCI: generic: Remove dependency on ARM-specific struct hw_pci"). Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-30PCI: rcar: Make PCI aware of the I/O resourcesPhil Edworthy
Make PCI aware of the I/O resources. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-30PCI: rcar: Build pcie-rcar.c only on ARMGeert Uytterhoeven
The pcie-rcar.c driver (controlled by PCI_RCAR_GEN2_PCIE) uses struct pci_sys_data and pci_ioremap_io(), which only exist on ARM. Building it on other arches, e.g., arm64/shmobile, causes errors like this: drivers/pci/host/pcie-rcar.c:138:52: warning: 'struct pci_sys_data' declared inside parameter list drivers/pci/host/pcie-rcar.c:380:4: error: implicit declaration of function 'pci_ioremap_io' [-Werror=implicit-function-declaration] Build pcie-rcar.c only on ARM. [bhelgaas: changelog, split to separate pci-rcar-gen2 from pcie-rcar] Reported-by: Wolfram Sang <wsa@the-dreams.de> (pci_ioremap_io()) Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-30PCI: rcar: Build pci-rcar-gen2.c only on ARMGeert Uytterhoeven
The pci-rcar-gen2.c driver (controlled by PCI_RCAR_GEN2) uses struct pci_sys_data, which only exists on ARM. Building it on other arches, e.g., arm64/shmobile, causes errors like this: drivers/pci/host/pci-rcar-gen2.c: In function 'rcar_pci_cfg_base': drivers/pci/host/pci-rcar-gen2.c:112:34: error: dereferencing pointer to incomplete type struct rcar_pci_priv *priv = sys->private_data; ^ Build pci-rcar-gen2.c only on ARM. [bhelgaas: changelog, split to separate pci-rcar-gen2 from pcie-rcar] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-23PCI: altera: Add Altera PCIe host controller driverLey Foon Tan
Add the Altera PCIe host controller driver. [bhelgaas: whitespace, fold in DT and maintainer updates, OF_PCI dependency from Arnd] Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <robh@kernel.org> (DT binding)
2015-10-22PCI: iproc: Fix header comment "Corporation" misspellingFlorian Fainelli
Fix an obvious "Broadcom Corporation" typo in a header comment. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ray Jui <rjui@broadcom.com>
2015-10-16PCI: iproc: Add outbound mapping supportRay Jui
Certain SoCs require the PCIe outbound mapping to be configured in software. Add support for those chips. [jonmason: Use %pap format when printing size_t to avoid warnings in 32-bit build.] [arnd: Use div64_u64() instead of "%" to avoid __aeabi_uldivmod link error in 32-bit build.] Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-13irqdomain/msi: Use fwnode instead of of_nodeMarc Zyngier
As we continue to push of_node towards the outskirts of irq domains, let's start tackling the case of msi_create_irq_domain and its little friends. This has limited impact in both PCI/MSI, platform MSI, and a few drivers. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-17-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-09PCI: generic: Fix address window calculation for non-zero starting busDavid Daney
Make the offset from the beginning of the "reg" property be from the starting bus number, rather than zero. Hoist the invariant size calculation out of the mapping for loop. Update host-generic-pci.txt to clarify the semantics of the "reg" property with respect to non-zero starting bus numbers. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rob Herring <robh@kernel.org>
2015-10-09PCI: mvebu: Remove code restricting accesses to slot 0Russell King
Now that we advertise a PCIe capability, the Linux PCI layer will not scan the bus for devices other than in slot 0. This makes the work-around to trap accesses to devices other than slot 0 unnecessary. Tested-by: Willy Tarreau <w@1wt.eu> (Iomega iConnect Kirkwood, MiraBox Armada 370) Tested-by: Andrew Lunn <andrew@lunn.ch> (D-Link DIR664 Kirkwood) Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> (Armada XP GP) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-10-09PCI: mvebu: Add PCI Express root complex capability blockRussell King
Add a PCI Express root complex capability block so the PCI layer identifies the bridge as a PCI Express device. We expose this as a version 1 PCIe capability block, with slot support. We disable the clock power management capability as this depends on boards wiring the CLKREQ# signal. Tested-by: Willy Tarreau <w@1wt.eu> (Iomega iConnect Kirkwood, MiraBox Armada 370) Tested-by: Andrew Lunn <andrew@lunn.ch> (D-Link DIR664 Kirkwood) Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> (Armada XP GP) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-19 23:32:32 +0000