summaryrefslogtreecommitdiff
path: root/drivers/platform
AgeCommit message (Collapse)Author
2014-02-06hp_accel: Add a new PnP ID HPQ6007 for new HP laptopsTakashi Iwai
commit b0ad4ff35d479a46a3b995a299db9aeb097acfce upstream. The DriveGuard chips on the new HP laptops are with a new PnP ID "HPQ6007". It should be compatible with older chips. Acked-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07thinkpad-acpi: recognize latest V-Series using DMI_BIOS_VENDORManoj Iyer
commit a4f46bb9fa84642e356898ee44b670989622f8bb upstream. In the latest V-series bios DMI_PRODUCT_VERSION does not contain the string Lenovo or Thinkpad, but is set to the model number, this causes the thinkpad_acpi module to fail to load. Recognize laptop as Lenovo using DMI_BIOS_VENDOR instead, which is set to Lenovo. Test on V490u ============= == After the patch == [ 1350.295757] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 1350.295760] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 1350.295761] thinkpad_acpi: ThinkPad BIOS H7ET21WW (1.00 ), EC unknown [ 1350.295763] thinkpad_acpi: Lenovo LENOVO, model LV5DXXX [ 1350.296086] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 1350.296694] thinkpad_acpi: radio switch found; radios are enabled [ 1350.296703] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode [ 1350.306466] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 1350.307082] Registered led device: tpacpi::thinklight [ 1350.307215] Registered led device: tpacpi::power [ 1350.307255] Registered led device: tpacpi::standby [ 1350.307294] Registered led device: tpacpi::thinkvantage [ 1350.308160] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 1350.308333] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 1350.312287] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input14 == Before the patch == sudo modprobe thinkpad_acpi FATAL: Error inserting thinkpad_acpi (/lib/modules/3.2.0-27-generic/kernel/drivers/platform/x86/thinkpad_acpi.ko): No such device Test on B485 ============= This patch was also test in a B485 where the thinkpad_acpi module does not have any issues loading. But, I tested it to make sure this patch does not break on already functioning models of Lenovo products. [13486.746359] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [13486.746364] thinkpad_acpi: http://ibm-acpi.sf.net/ [13486.746368] thinkpad_acpi: ThinkPad BIOS HJET15WW(1.01), EC unknown [13486.746373] thinkpad_acpi: Lenovo Lenovo LB485, model 814TR01 [13486.747300] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [13486.752435] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [13486.752883] Registered led device: tpacpi::thinklight [13486.752915] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [13486.753216] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [13486.757147] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15 Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Shuduo Sang <shuduo.sang@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-19hp_accel: Ignore the error from lis3lv02d_poweron() at resumeShuah Khan
commit 7783819920ca52fc582a2782f654fe6ed373f465 upstream. The error in lis3lv02_poweron() is harmless in the resume path, so we should ignore it. It is inline with the other usages of lis3lv02_poweron() and matches the 3.0 code for this routine. This patch is in suse git and might have missed making it into the mainline. opensuse - commit id: 66ccdac87c322cf7af12bddba8c805af640b1cff Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Shuah Khan <shuah.khan@hp.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28asus-laptop: Do not call HWRS on initBen Hutchings
commit cb7da022450cdaaebd33078b6b32fb7dd2aaf6db upstream. Since commit 8871e99f89b7 ('asus-laptop: HRWS/HWRS typo'), module initialisation is very slow on the Asus UL30A. The HWRS method takes about 12 seconds to run, and subsequent initialisation also seems to be delayed. Since we don't really need the result, don't bother calling it on init. Those who are curious can still get the result through the 'infos' device attribute. Update the comment about HWRS in show_infos(). Reported-by: ryan <draziw+deb@gmail.com> References: http://bugs.debian.org/692436 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-14samsung-laptop: Disable on EFI hardwareMatt Fleming
commit e0094244e41c4d0c7ad69920681972fc45d8ce34 upstream. It has been reported that running this driver on some Samsung laptops with EFI can cause those machines to become bricked as detailed in the following report, https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 There have also been reports of this driver causing Machine Check Exceptions on recent EFI-enabled Samsung laptops, https://bugzilla.kernel.org/show_bug.cgi?id=47121 So disable it if booting from EFI since this driver relies on grovelling around in the BIOS memory map which isn't going to work. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: Steve Langasek <steve.langasek@canonical.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-14efi: Make 'efi_enabled' a function to query EFI facilitiesMatt Fleming
commit 83e68189745ad931c2afd45d8ee3303929233e7f upstream. Originally 'efi_enabled' indicated whether a kernel was booted from EFI firmware. Over time its semantics have changed, and it now indicates whether or not we are booted on an EFI machine with bit-native firmware, e.g. 64-bit kernel with 64-bit firmware. The immediate motivation for this patch is the bug report at, https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 which details how running a platform driver on an EFI machine that is designed to run under BIOS can cause the machine to become bricked. Also, the following report, https://bugzilla.kernel.org/show_bug.cgi?id=47121 details how running said driver can also cause Machine Check Exceptions. Drivers need a new means of detecting whether they're running on an EFI machine, as sadly the expression, if (!efi_enabled) hasn't been a sufficient condition for quite some time. Users actually want to query 'efi_enabled' for different reasons - what they really want access to is the list of available EFI facilities. For instance, the x86 reboot code needs to know whether it can invoke the ResetSystem() function provided by the EFI runtime services, while the ACPI OSL code wants to know whether the EFI config tables were mapped successfully. There are also checks in some of the platform driver code to simply see if they're running on an EFI machine (which would make it a bad idea to do BIOS-y things). This patch is a prereq for the samsung-laptop fix patch. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Olof Johansson <olof@lixom.net> Cc: Peter Jones <pjones@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Steve Langasek <steve.langasek@canonical.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Konrad Rzeszutek Wilk <konrad@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17samsung-laptop: Add quirk for broken acpi_video backlight on N250PSeth Forshee
commit e04c200f1f2de8eaa2f5af6d97e7e213a1abb424 upstream. BugLink: http://bugs.launchpad.net/bugs/1086921 Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-02asus-nb-wmi: add some video toggle keysAceLan Kao
commit 3766054fff4af1b58a1440a284907887f4d2e8be upstream. There are some new video switch keys that used by newer machines. 0xA0 - SDSP HDMI only 0xA1 - SDSP LCD + HDMI 0xA2 - SDSP CRT + HDMI 0xA3 - SDSP TV + HDMI But in Linux, there is no suitable userspace application to handle this, so, mapping them all to KEY_SWITCHVIDEOMODE. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-02asus-laptop: HRWS/HWRS typoCorentin Chary
commit 8871e99f89b7d7b1ea99de550eea2a56273f42ab upstream. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=24222 Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15asus-wmi: use ASUS_WMI_METHODID_DSTS2 as default DSTS ID.Alex Hung
commit 63a78bb1051b240417daad3a3fa9c1bb10646dca upstream. According to responses from the BIOS team, ASUS_WMI_METHODID_DSTS2 (0x53545344) will be used as future DSTS ID. In addition, calling asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS2, 0, 0, NULL) returns ASUS_WMI_UNSUPPORTED_METHOD in new ASUS laptop PCs. This patch fixes no DSTS ID will be assigned in this case. Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19intel_ips: blacklist HP ProBook laptopsTakashi Iwai
commit 88ca518b0bb4161e5f20f8a1d9cc477cae294e54 upstream. intel_ips driver spews the warning message "ME failed to update for more than 1s, likely hung" at each second endlessly on HP ProBook laptops with IronLake. As this has never worked, better to blacklist the driver for now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-06Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes form Peter Anvin * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver x86, relocs: Remove an unused variable asm-generic: Use __BITS_PER_LONG in statfs.h x86/amd: Re-enable CPU topology extensions in case BIOS has disabled it
2012-05-04intel_mid_powerbtn: mark irq as IRQF_NO_SUSPENDYong Wang
So that the power button still wakes up the platform. Signed-off-by: Pierre Tardy <pierre.tardy@intel.com> Link: http://lkml.kernel.org/r/20120504210244.F2EA5A018B@akpm.mtv.corp.google.com Tested-by: Kangkai Yin <kangkai.yin@intel.com> Tested-by: Yong Wang <yong.y.wang@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-04-26Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge fixes from Andrew Morton: "13 fixes. The acerhdf patches aren't (really) fixes. But they've been stuck in my tree for up to two years, sent to Matthew multiple times and the developers are unhappy." * emailed from Andrew Morton <akpm@linux-foundation.org>: (13 patches) mm: fix NULL ptr dereference in move_pages mm: fix NULL ptr dereference in migrate_pages revert "proc: clear_refs: do not clear reserved pages" drivers/rtc/rtc-ds1307.c: fix BUG shown with lock debugging enabled arch/arm/mach-ux500/mbox-db5500.c: world-writable sysfs fifo file hugetlbfs: lockdep annotate root inode properly acerhdf: lowered default temp fanon/fanoff values acerhdf: add support for new hardware acerhdf: add support for Aspire 1410 BIOS v1.3314 fs/buffer.c: remove BUG() in possible but rare condition mm: fix up the vmscan stat in vmstat epoll: clear the tfile_check_list on -ELOOP mm/hugetlb: fix warning in alloc_huge_page/dequeue_huge_page_vma
2012-04-25acerhdf: lowered default temp fanon/fanoff valuesPeter Feuerer
Due to new supported hardware, of which the actual temperature limits of processor, harddisk and other components are unknown, it feels safer with lower fanon / fanoff settings. It won't change much for most people, already using acerhdf, as they use their own fanon/fanoff variable settings when loading the module. Furthermore seems like kernel and userspace tools have been improved to work more efficient and netbooks don't get so hot anymore. Signed-off-by: Peter Feuerer <peter@piie.net> Acked-by: Borislav Petkov <petkovbb@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-25acerhdf: add support for new hardwarePeter Feuerer
Add support for new hardware: Acer Aspire LT-10Q/531/751/1810/1825, Acer Travelmate 7730, Packard Bell ENBFT/DOTVR46 Signed-off-by: Peter Feuerer <peter@piie.net> Acked-by: Borislav Petkov <petkovbb@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-25acerhdf: add support for Aspire 1410 BIOS v1.3314Clay Carpenter
Add support for Aspire 1410 BIOS v1.3314. Fixes the following error: acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1410/v1.3314, please report, aborting! Signed-off-by: Clay Carpenter <claycarpenter@gmail.com> Signed-off-by: Peter Feuerer <peter@piie.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-17dell-laptop: Terminate quirks list properlyMartin Nyhus
Add missing DMI_NONE entry to end of the quirks list so dmi_check_system() won't read past the end of the list. Signed-off-by: Martin Nyhus <martin.nyhus@gmx.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-04-17intel_ips: Hush the i915 symbols messageAdam Jackson
We can't control order here, and getting it inverted is harmless. So turn this down to dev_info() and leave a note about how to fix it in case userspace is insufficiently automagic. Bugzilla: https://bugzilla.redhat.com/794953 Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-30Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Power Management changes from Len Brown: - ACPI 5.0 after-ripples, ACPICA/Linux divergence cleanup - cpuidle evolving, more ARM use - thermal sub-system evolving, ditto - assorted other PM bits Fix up conflicts in various cpuidle implementations due to ARM cpuidle cleanups (ARM at91 self-refresh and cpu idle code rewritten into "standby" in asm conflicting with the consolidation of cpuidle time keeping), trivial SH include file context conflict and RCU tracing fixes in generic code. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (77 commits) ACPI throttling: fix endian bug in acpi_read_throttling_status() Disable MCP limit exceeded messages from Intel IPS driver ACPI video: Don't start video device until its associated input device has been allocated ACPI video: Harden video bus adding. ACPI: Add support for exposing BGRT data ACPI: export acpi_kobj ACPI: Fix logic for removing mappings in 'acpi_unmap' CPER failed to handle generic error records with multiple sections ACPI: Clean redundant codes in scan.c ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed() ACPI: consistently use should_use_kmap() PNPACPI: Fix device ref leaking in acpi_pnp_match ACPI: Fix use-after-free in acpi_map_lsapic ACPI: processor_driver: add missing kfree ACPI, APEI: Fix incorrect APEI register bit width check and usage Update documentation for parameter *notrigger* in einj.txt ACPI, APEI, EINJ, new parameter to control trigger action ACPI, APEI, EINJ, limit the range of einj_param ACPI, APEI, Fix ERST header length check cpuidle: power_usage should be declared signed integer ...
2012-03-30Disable MCP limit exceeded messages from Intel IPS driverAndi Kleen
On a system on the thermal limit these are quite noisy and flood the logs. Better would be a counter anyways. But given that we don't even have anything for normal throttling this doesn't seem to be urgent either. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-28Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds
Pull x86 platform driver updates from Matthew Garrett: "Some significant updates to samsung-laptop, additional hardware support for Toshibas, misc updates to various hardware and a new backlight driver for some Apple machines." Fix up trivial conflicts: geode Geos update happening next to net5501 support, and MSIC thermal platform support added twice. * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (77 commits) acer-wmi: add quirk table for video backlight vendor mode drivers/platform/x86/amilo-rfkill.c::amilo_rfkill_probe() avoid NULL deref samsung-laptop: unregister ACPI video module for some well known laptops acer-wmi: No wifi rfkill on Sony machines thinkpad-acpi: recognize Lenovo as version string in newer V-series BIOS asus-wmi: don't update power and brightness when using scalar eeepc-wmi: split et2012 specific hacks eeepc-wmi: refine quirks handling asus-nb-wmi: set panel_power correctly asus-wmi: move WAPF variable into quirks_entry asus-wmi: store backlight power status for AIO machine asus-wmi: add scalar board brightness adj. support samsung-laptop: cleanup return type: mode_t vs umode_t drivers, samsung-laptop: fix usage of isalnum drivers, samsung-laptop: fix initialization of sabi_data in sabi_set_commandb asus-wmi: on/off bit is not set when reading the value eeepc-wmi: add extra keymaps for EP121 asus-nb-wmi: ignore useless keys acer-wmi: support Lenovo ideapad S205 Brazos wifi switch acer-wmi: fix out of input parameter size when set ...
2012-03-26acer-wmi: add quirk table for video backlight vendor modeLee, Chun-Yi
There have some acer laptop have broken _BCM implemenation, the AML code wrote value to EC register but firmware didn't change brighenss. Fortunately, the brightness control works on those machines with vendor mode. So, add quirk table for video backlight vendor mode and unregister acpi video interface on those machines. Tested on Acer TravelMate 4750 Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26drivers/platform/x86/amilo-rfkill.c::amilo_rfkill_probe() avoid NULL derefJesper Juhl
In drivers/platform/x86/amilo-rfkill.c::amilo_rfkill_probe() the call to dmi_first_match() may fail and return NULL. If it does return NULL, then we'll be dereferencing a NULL pointer in the rfkill_alloc() call where we do 'system_id->driver_data' --> KABOOM! Avoid that problem by testing for a NULL return value from dmi_first_match() and bailing out if it fails. I was a bit uncertain about what to return in the failure case. In the end I settled for -ENXIO as the most logical error to return. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26samsung-laptop: unregister ACPI video module for some well known laptopsCorentin Chary
On these laptops, the ACPI video is not functional, and very unlikely to be fixed by the vendor. Note that intel_backlight works for some of these laptops, and the backlight from samsung-laptop always work. The good news is that newer laptops have functional ACPI video device and won't end up growing this list. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26acer-wmi: No wifi rfkill on Sony machinesLee, Chun-Yi
The wireless rfkill should charged by sony-laptop but not acer-wmi. So, add Sony's SNY5001 acpi device to blacklist in acer-wmi. Tested on Sony Vaio Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Mattia Dongili <malattia@linux.it> Cc: Dimitris N <ddarlac@gmail.com> Tested-by: Dimitris N <ddarlac@gmail.com> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26thinkpad-acpi: recognize Lenovo as version string in newer V-series BIOSManoj Iyer
The newer V series bios reports product version as 'Lenovo' instead of 'ThinkPad'. Recoginze this new string so that the module can load. Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Tested-by: James Ferguson <james.ferguson@canonical.com> Tested-by: Dennis Chua <dennis.chua@canonical.com> Tested-by: Ike Pan <ike.pan@canonical.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
2012-03-26asus-wmi: don't update power and brightness when using scalarCorentin Chary
But we can still do it on other boards, as this might happen if the backlight driver change when update_bl is called. Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26eeepc-wmi: split et2012 specific hacksCorentin Chary
Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26eeepc-wmi: refine quirks handlingCorentin Chary
Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26asus-nb-wmi: set panel_power correctlyCorentin Chary
Even if it's currently unused. Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26asus-wmi: move WAPF variable into quirks_entryCorentin Chary
Some models work better with different values of wapf, so move the variable into quriks_entry to make it more easy to give a specific value to different models. Based on original patch from AceLan Kao <acelan.kao@canonical.com> Cc: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26asus-wmi: store backlight power status for AIO machineAceLan Kao
Due to some implementation reasons, ASUS ET2012 All-in-One machines can't report the correct backlight power status, it will always return 1. To track the backlight power status correctly, we have to store the status by ourselves. BTW, by the BIOS design, the backlight power will be turn on/off sequently, no matter what the value of the parameter will be. More over, the brightness adjustment command will turn on the backlight power. Those behaviors will make us fail to track the backlight power status. For example, While we are trying to turn on the backlight power, we will send out the brightness adjustment command and then trying to figure out if we have to turn on the backlight power, then send out the command. But, the real case is that, the backlight power turns on while sending the brightness adjustment command, and then we send out the command to turn on the backlight power, it actually will turn off the backlight power and the backlight power status we recorded becomes wrong. So, we have to seperate these two commands by a if statement. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26asus-wmi: add scalar board brightness adj. supportAceLan Kao
Some ASUS ET2012E/I All-in-One machines that use a scalar board to control the brightness, and they only accept brightness up and down command. So, I introduced a get_scalar_command() function to pass the command to the scalar board through WMI. Besides, we have to store the brightness value locally, for we need the old value to know the brightness value is increasing or decreasing. BTW, since there is no way to retrieve the actual brightness(it would be a fixed value), and the max brightness value would be fixed to 1, so we have to keep passing the brightness up/down command when we reached the max brightness value or 0. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26samsung-laptop: cleanup return type: mode_t vs umode_tDan Carpenter
This function returns a umode_t (unsigned short) instead of mode_t which is an unsigned int on some architectures. Cleaning this up silences a compile warning: drivers/platform/x86/samsung-laptop.c:1108:2: warning: initialization from incompatible pointer type [enabled by default] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26drivers, samsung-laptop: fix usage of isalnumDavid Rientjes
linux/ctype.h is needed for isalnum() to avoid a build error: drivers/platform/x86/samsung-laptop.c: In function ‘samsung_sabi_diag’: drivers/platform/x86/samsung-laptop.c:1306: error: implicit declaration of function ‘isalnum’ Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26drivers, samsung-laptop: fix initialization of sabi_data in sabi_set_commandbDavid Rientjes
Fields d0, d1, d2, and d3 are members of an anonymous struct inside an anonymous union inside struct sabi_data. Initialization must be done by wrapping the anonymous union and structs with brackets to avoid a build error: drivers/platform/x86/samsung-laptop.c: In function ‘sabi_set_commandb’: drivers/platform/x86/samsung-laptop.c:433: error: unknown field ‘d0’ specified in initializer drivers/platform/x86/samsung-laptop.c:433: warning: missing braces around initializer drivers/platform/x86/samsung-laptop.c:433: warning: (near initialization for ‘in.<anonymous>’) ... Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26asus-wmi: on/off bit is not set when reading the valueCorentin Chary
Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26eeepc-wmi: add extra keymaps for EP121Chih-Wei Huang
Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26asus-nb-wmi: ignore useless keysCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26acer-wmi: support Lenovo ideapad S205 Brazos wifi switchLee, Chun-Yi
Vaclav found a new ideapad S205 Brazos machine that used the same EC register of wireless with S205 but has different product name. So, add this machine to quirk for support wireless rfkill. Tested on Lenovo ideapad S205 Brazos Tested-by: Vaclav Mocek <vmocek@gmail.com> Acked-by: Ike Panhc <ike.pan@canonical.com> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26acer-wmi: fix out of input parameter size when setLee, Chun-Yi
The input parameter of set device status is different with get device status. There have volume value element for set status but don't need for get action. On Acer TravelMate 4750 creates field on volume value element even doesn't use it in DSDT. So, add this patch for separate input paramter between set device status with get status. Tested on Acer TravelMate 4750 Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26acer-wmi: Detect communication hot key numberLee, Chun-Yi
Currently we set a fixed hot key number to 0x01 for communction button, but, actually, the key number is different on each acer laptop and it was reported by SMBIOS. So, add this patch to get the communication hot key number from Acer OEM-specific SMBIOS Type AA. Tested on Acer TravelMate 4750 Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-26platform/x86: Add driver for Apple gmux deviceSeth Forshee
Apple laptops with hybrid graphics have a device named gmux that controls the muxing of the LVDS panel between the GPUs as well as screen brightness. This driver adds support for the gmux device. Only backlight control is supported initially. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Tested-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-23Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci Pull PCI changes (including maintainer change) from Jesse Barnes: "This pull has some good cleanups from Bjorn and Yinghai, as well as some more code from Yinghai to better handle resource re-allocation when enabled. There's also a new initcall_debug feature from Arjan which will print out quirk timing information to help identify slow quirks for fixing or refinement (Yinghai sent in a few patches to do just that once the new debug code landed). Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas. He's been a core PCI and Linux contributor for some time now, and has kindly volunteered to take over. I just don't feel I have the time for PCI review and work that it deserves lately (I've taken on some other projects), and haven't been as responsive lately as I'd like, so I approached Bjorn asking if he'd like to manage things. He's going to give it a try, and I'm confident he'll do at least as well as I have in keeping the tree managed, patches flowing, and keeping things stable." Fix up some fairly trivial conflicts due to other cleanups (mips device resource fixup cleanups clashing with list handling cleanup, ppc iseries removal clashing with pci_probe_only cleanup etc) * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits) PCI: Bjorn gets PCI hotplug too PCI: hand PCI maintenance over to Bjorn Helgaas unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h sparc/PCI: convert devtree and arch-probed bus addresses to resource powerpc/PCI: allow reallocation on PA Semi powerpc/PCI: convert devtree bus addresses to resource powerpc/PCI: compute I/O space bus-to-resource offset consistently arm/PCI: don't export pci_flags PCI: fix bridge I/O window bus-to-resource conversion x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()' PCI / PCIe: Introduce command line option to disable ARI PCI: make acpihp use __pci_remove_bus_device instead PCI: export __pci_remove_bus_device PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device PCI: print out PCI device info along with duration PCI: Move "pci reassigndev resource alignment" out of quirks.c PCI: Use class for quirk for usb host controller fixup PCI: Use class for quirk for ti816x class fixup PCI: Use class for quirk for intel e100 interrupt fixup ...
2012-03-22Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform changes from Ingo Molnar. Removes the Moorestown platform that nobody ever used. * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform: Move APIC ID validity check into platform APIC code x86/olpc/xo15/sci: Enable lid close wakeup control x86/geode/net5501: Add platform driver for Soekris Engineering net5501 x86/geode/alix2: Supplement driver to include GPIO button support x86/mid/powerbtn: Use MSIC read/write instead of ipc_scu x86/mid/thermal: Turn off thermistor x86/mid/thermal: Add msic_thermal alias x86/mid/thermal: Convert to use Intel MSIC API x86/mid/scu_ipc: Remove Moorestown support x86/mid: Kill off Moorestown x86/mrst: Add msic_thermal platform support x86/config: Select MSIC MFD driver on Intel Medfield platform x86/mid: Remove Intel Moorestown x86/mrst: Set ISA bus type for fake MP IRQs x86/ioapic: Use legacy_pic to set correct gsi-irq mapping
2012-03-22toshiba_acpi: Refuse to load on machines with buggy INFO implementationsSeth Forshee
Several Satellite models have a buggy implementation of the INFO method that causes ACPI exceptions when executed: ACPI Error: Result stack is empty! State=ffff88012d70f800 (20110413/dswstate-98) ACPI Exception: AE_AML_NO_RETURN_VALUE, Missing or null operand (20110413/dsutils-646) ACPI Exception: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20110413/dsutils-763) ACPI Error: Method parse/execution failed [\_SB_.VALZ.GETE] (Node ffff880131175eb0), AE_AML_NO_RETURN_VALUE (20110413/psparse-536) ACPI Error: Method parse/execution failed [\_SB_.VALZ.INFO] (Node ffff880131175ed8), AE_AML_NO_RETURN_VALUE (20110413/psparse-536) toshiba_acpi: ACPI INFO method execution failed toshiba_acpi: Failed to query hotkey event All known machines with this implementation also have a WMI interface with event GUID 59142400-C6A3-40FA-BADB-8A2652834100 which is not seen on any other models. Refuse to load toshiba_acpi on machines with this guid. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-22toshiba_acpi: Support additional hotkey scancodesAzael Avalos
These scancodes are used by many of the models now supported with the addition of TOS1900 device support. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-22toshiba_acpi: Support alternate hotkey interfacesSeth Forshee
There are two types of problems that prevent hotkeys from working on many of the machines supported by toshiba_acpi. The first of these is the lack of a functioning SCI for hotkey events. For these machines it is possible to filter the Fn keypresses from the keyboard and generate a notification by executing the ACPI NTFY method. The second problem is a lack of support for HCI_SYSTEM_EVENT, which is used for reading the hotkey scancodes. On these machines the scancodes can be read by executing the ACPI NTFY method. This patch fixes both problems by installing an i8042 filter when the NTFY method is present to generate notifications and by detecting which of INFO or HCI_SYSTEM_EVENT is supported for reading scancodes. If neither method of reading scancodes is supported, the hotkey input device is not registered. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "It's indeed trivial -- mostly documentation updates and a bunch of typo fixes from Masanari. There are also several linux/version.h include removals from Jesper." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits) kcore: fix spelling in read_kcore() comment constify struct pci_dev * in obvious cases Revert "char: Fix typo in viotape.c" init: fix wording error in mm_init comment usb: gadget: Kconfig: fix typo for 'different' Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c" writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header writeback: fix typo in the writeback_control comment Documentation: Fix multiple typo in Documentation tpm_tis: fix tis_lock with respect to RCU Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c" Doc: Update numastat.txt qla4xxx: Add missing spaces to error messages compiler.h: Fix typo security: struct security_operations kerneldoc fix Documentation: broken URL in libata.tmpl Documentation: broken URL in filesystems.tmpl mtd: simplify return logic in do_map_probe() mm: fix comment typo of truncate_inode_pages_range power: bq27x00: Fix typos in comment ...