summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)Author
2013-08-29SCSI: zfcp: fix schedule-inside-lock in scsi_device list loopsMartin Peschke
commit 924dd584b198a58aa7cb3efefd8a03326550ce8f upstream. BUG: sleeping function called from invalid context at kernel/workqueue.c:2752 in_atomic(): 1, irqs_disabled(): 1, pid: 360, name: zfcperp0.0.1700 CPU: 1 Not tainted 3.9.3+ #69 Process zfcperp0.0.1700 (pid: 360, task: 0000000075b7e080, ksp: 000000007476bc30) <snip> Call Trace: ([<00000000001165de>] show_trace+0x106/0x154) [<00000000001166a0>] show_stack+0x74/0xf4 [<00000000006ff646>] dump_stack+0xc6/0xd4 [<000000000017f3a0>] __might_sleep+0x128/0x148 [<000000000015ece8>] flush_work+0x54/0x1f8 [<00000000001630de>] __cancel_work_timer+0xc6/0x128 [<00000000005067ac>] scsi_device_dev_release_usercontext+0x164/0x23c [<0000000000161816>] execute_in_process_context+0x96/0xa8 [<00000000004d33d8>] device_release+0x60/0xc0 [<000000000048af48>] kobject_release+0xa8/0x1c4 [<00000000004f4bf2>] __scsi_iterate_devices+0xfa/0x130 [<000003ff801b307a>] zfcp_erp_strategy+0x4da/0x1014 [zfcp] [<000003ff801b3caa>] zfcp_erp_thread+0xf6/0x2b0 [zfcp] [<000000000016b75a>] kthread+0xf2/0xfc [<000000000070c9de>] kernel_thread_starter+0x6/0xc [<000000000070c9d8>] kernel_thread_starter+0x0/0xc Apparently, the ref_count for some scsi_device drops down to zero, triggering device removal through execute_in_process_context(), while the lldd error recovery thread iterates through a scsi device list. Unfortunately, execute_in_process_context() decides to immediately execute that device removal function, instead of scheduling asynchronous execution, since it detects process context and thinks it is safe to do so. But almost all calls to shost_for_each_device() in our lldd are inside spin_lock_irq, even in thread context. Obviously, schedule() inside spin_lock_irq sections is a bad idea. Change the lldd to use the proper iterator function, __shost_for_each_device(), in combination with required locking. Occurences that need to be changed include all calls in zfcp_erp.c, since those might be executed in zfcp error recovery thread context with a lock held. Other occurences of shost_for_each_device() in zfcp_fsf.c do not need to be changed (no process context, no surrounding locking). The problem was introduced in Linux 2.6.37 by commit b62a8d9b45b971a67a0f8413338c230e3117dff5 "[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit". Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29SCSI: zfcp: fix lock imbalance by reworking request queue lockingMartin Peschke
commit d79ff142624e1be080ad8d09101f7004d79c36e1 upstream. This patch adds wait_event_interruptible_lock_irq_timeout(), which is a straight-forward descendant of wait_event_interruptible_timeout() and wait_event_interruptible_lock_irq(). The zfcp driver used to call wait_event_interruptible_timeout() in combination with some intricate and error-prone locking. Using wait_event_interruptible_lock_irq_timeout() as a replacement nicely cleans up that locking. This rework removes a situation that resulted in a locking imbalance in zfcp_qdio_sbal_get(): BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10 last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp] It was introduced by commit c2af7545aaff3495d9bf9a7608c52f0af86fb194 "[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit without a required lock being held. The problem occured when a special, non-SCSI I/O request was being submitted in process context, when the adapter's queues had been torn down. In this case the bug surfaced when the Fibre Channel port connection for a well-known address was closed during a concurrent adapter shut-down procedure, which is a rare constellation. This patch also fixes these warnings from the sparse tool (make C=1): drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in 'zfcp_qdio_sbal_check' - wrong count at exit drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in 'zfcp_qdio_sbal_get' - unexpected unlock Last but not least, we get rid of that crappy lock-unlock-lock sequence at the beginning of the critical section. It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-25SCSI: zfcp: status read buffers on first adapter open with link downSteffen Maier
commit 9edf7d75ee5f21663a0183d21f702682d0ef132f upstream. Commit 64deb6efdc5504ce97b5c1c6f281fffbc150bd93 "[SCSI] zfcp: Use status_read_buf_num provided by FCP channel" started using a value returned by the channel but only evaluated the value if the fabric link is up. Commit 8d88cf3f3b9af4713642caeb221b6d6a42019001 "[SCSI] zfcp: Update status read mempool" introduced mempool resizings based on the above value. On setting an FCP device online for the very first time since boot, a new zeroed adapter object is allocated. If the link is down, the number of status read requests remains zero. Since just the config data exchange is incomplete, we proceed with adapter open recovery. However, we unconditionally call mempool_resize with adapter->stat_read_buf_num == 0 in this case. This causes a kernel message "kernel BUG at mm/mempool.c:131!" in process "zfcperp<FCP-device-bus-ID>" with last function mempool_resize in Krnl PSW and zfcp_erp_thread in the Call Trace. Don't evaluate channel values which are invalid on link down. The number of status read requests is always valid, evaluated, and set to a positive minimum greater than zero. The adapter open recovery can proceed and the channel has status read buffers to inform us on a future link up event. While we are not aware of any other code path that could result in mempool resize attempts of size zero, we still also initialize the number of status read buffers to be posted to a static minimum number on adapter object allocation. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-25SCSI: zfcp: block queue limits with data routerSteffen Maier
commit 5fea4291deacd80188b996d2f555fc6a1940e5d4 upstream. Commit 86a9668a8d29ea711613e1cb37efa68e7c4db564 "[SCSI] zfcp: support for hardware data router" reduced the initial block queue limits in the scsi_host_template to the absolute minimum and adjusted them later on. However, the adjustment was too late for the BSG devices of Scsi_Host and fc_host. Therefore, ioctl(..., SG_IO, ...) with request or response size > 4kB to a BSG device of an fc_host or a Scsi_Host fails with EINVAL. As a result, users of such ioctl such as HBA_SendCTPassThru() in libzfcphbaapi return with error HBA_STATUS_ERROR. Initialize the block queue limits in zfcp_scsi_host_template to the greatest common denominator (GCD). While we cannot exploit the slightly enlarged maximum request size with data router, this should be neglectible. Doing so also avoids running into trouble after live guest relocation (LGR) / migration from a data router FCP device to an FCP device that does not support data router. In that case, zfcp would figure out the new limits on adapter recovery, but the fc_host and Scsi_Host (plus in fact all sdevs) still exist with the old and now too large queue limits. It should also OK, not to use half the size as in the DIX case, because fc_host and Scsi_Host do not transport FCP requests including SCSI commands using protection data. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-25SCSI: zfcp: fix adapter (re)open recovery while link to SAN is downDaniel Hansel
commit f76ccaac4f82c463a037aa4a1e4ccb85c7011814 upstream. FCP device remains in status ERP_FAILED when device is switched online or adapter recovery is triggered while link to SAN is down. When Exchange Configuration Data command returns the FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE it aborts the exchange process. The only retries are done during the common error recovery procedure (i.e. max. 3 retries with 8sec sleep between) and remains in status ERP_FAILED with QDIO down. This commit reverts the commit 0df138476c8306478d6e726f044868b4bccf411c (zfcp: Fix adapter activation on link down). When FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE is received the adapter recovery will be finished without any retries. QDIO will be up now and status changes such as LINK UP will be received now. Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13netiucv: Hold rtnl between name allocation and device registration.Benjamin Poirier
fixes a race condition between concurrent initializations of netiucv devices that try to use the same name. sysfs: cannot create duplicate filename '/devices/iucv/netiucv2' [...] Call Trace: ([<00000000002edea4>] sysfs_add_one+0xb0/0xdc) [<00000000002eecd4>] create_dir+0x80/0xfc [<00000000002eee38>] sysfs_create_dir+0xe8/0x118 [<00000000003835a8>] kobject_add_internal+0x120/0x2d0 [<00000000003839d6>] kobject_add+0x62/0x9c [<00000000003d9564>] device_add+0xcc/0x510 [<000003e00212c7b4>] netiucv_register_device+0xc0/0x1ec [netiucv] Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Tested-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31s390/dasd: fix handling of gone pathsStefan Weinhuber
When a path is gone and dasd_generic_path_event is called with a PE_PATH_GONE event, we must assume that any I/O request on that subchannel is still running. This is unlike the dasd_generic_notify handler and the CIO_NO_PATH event, which implies that the subchannel has been cleared. If dasd_generic_path_event finds that the path has been the last usable path, it must not call dasd_generic_last_path_gone (which would reset the state of running requests), but just set the DASD_STOPPED_DC_WAIT bit. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 update from Martin Schwidefsky: "An additional sysfs attribute for channel paths and a couple of bux fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pgtable: fix ipte notify bit s390/xpram: mark xpram as non-rotational s390/smp: fix cpu re-scan vs. cpu state s390/cio: add channel ID sysfs attribute s390/ftrace: fix mcount adjustment s390: fix gmap_ipte_notifier vs. software dirty pages s390: disable pfmf for clear page instruction s390/disassembler: prevent endless loop in print_fn_code() s390: remove non existent reference to GENERIC_KERNEL_THREAD
2013-05-17s390/xpram: mark xpram as non-rotationalChristian Borntraeger
xpram is a memory technology. Lets mark that as non-rotational. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-15s390/cio: add channel ID sysfs attributePeter Oberparleiter
Add new attributes "chid" and "chid_external" to the channel-path sysfs directory. These attributes contain information related to the channel-ID of the channel-path. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-08Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block core updates from Jens Axboe: - Major bit is Kents prep work for immutable bio vecs. - Stable candidate fix for a scheduling-while-atomic in the queue bypass operation. - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging discard bios. - Tejuns changes to convert the writeback thread pool to the generic workqueue mechanism. - Runtime PM framework, SCSI patches exists on top of these in James' tree. - A few random fixes. * 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits) relay: move remove_buf_file inside relay_close_buf partitions/efi.c: replace useless kzalloc's by kmalloc's fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read() block: fix max discard sectors limit blkcg: fix "scheduling while atomic" in blk_queue_bypass_start Documentation: cfq-iosched: update documentation help for cfq tunables writeback: expose the bdi_wq workqueue writeback: replace custom worker pool implementation with unbound workqueue writeback: remove unused bdi_pending_list aoe: Fix unitialized var usage bio-integrity: Add explicit field for owner of bip_buf block: Add an explicit bio flag for bios that own their bvec block: Add bio_alloc_pages() block: Convert some code to bio_for_each_segment_all() block: Add bio_for_each_segment_all() bounce: Refactor __blk_queue_bounce to not use bi_io_vec raid1: use bio_copy_data() pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage pktcdvd: use bio_copy_data() block: Add bio_copy_data() ...
2013-05-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "A couple of fixes + getting rid of __blkdev_put() return value" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: proc: Use PDE attribute setting accessor functions make blkdev_put() return void block_device_operations->release() should return void mtd_blktrans_ops->release() should return void hfs: SMP race on directory close()
2013-05-07block_device_operations->release() should return voidAl Viro
The value passed is 0 in all but "it can never happen" cases (and those only in a couple of drivers) *and* it would've been lost on the way out anyway, even if something tried to pass something meaningful. Just don't bother. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Martin Schwidefsky: "This is the second batch of s390 patches for the 3.10 merge window. Heiko improved the memory detection, this fixes kdump for large memory sizes. Some kvm related memory management work, new ipldev/condev keywords in cio and bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mem_detect: remove artificial kdump memory types s390/mm: add pte invalidation notifier for kvm s390/zcrypt: ap bus rescan problem when toggle crypto adapters on/off s390/memory hotplug,sclp: get rid of per memory increment usecount s390/memory hotplug: provide memory_block_size_bytes() function s390/mem_detect: limit memory detection loop to "mem=" parameter s390/kdump,bootmem: fix bootmem allocator bitmap size s390: get rid of odd global real_memory_size s390/kvm: Change the virtual memory mapping location for Virtio devices s390/zcore: calculate real memory size using own get_mem_size function s390/mem_detect: add DAT sanity check s390/mem_detect: fix lockdep irq tracing s390/mem_detect: move memory detection code to mm folder s390/zfcpdump: exploit new cio_ignore keywords s390/cio: add condev keyword to cio_ignore s390/cio: add ipldev keyword to cio_ignore s390/uaccess: add "fallthrough" comments
2013-05-05Merge tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Gleb Natapov: "Highlights of the updates are: general: - new emulated device API - legacy device assignment is now optional - irqfd interface is more generic and can be shared between arches x86: - VMCS shadow support and other nested VMX improvements - APIC virtualization and Posted Interrupt hardware support - Optimize mmio spte zapping ppc: - BookE: in-kernel MPIC emulation with irqfd support - Book3S: in-kernel XICS emulation (incomplete) - Book3S: HV: migration fixes - BookE: more debug support preparation - BookE: e6500 support ARM: - reworking of Hyp idmaps s390: - ioeventfd for virtio-ccw And many other bug fixes, cleanups and improvements" * tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits) kvm: Add compat_ioctl for device control API KVM: x86: Account for failing enable_irq_window for NMI window request KVM: PPC: Book3S: Add API for in-kernel XICS emulation kvm/ppc/mpic: fix missing unlock in set_base_addr() kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write kvm/ppc/mpic: remove users kvm/ppc/mpic: fix mmio region lists when multiple guests used kvm/ppc/mpic: remove default routes from documentation kvm: KVM_CAP_IOMMU only available with device assignment ARM: KVM: iterate over all CPUs for CPU compatibility check KVM: ARM: Fix spelling in error message ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally KVM: ARM: Fix API documentation for ONE_REG encoding ARM: KVM: promote vfp_host pointer to generic host cpu context ARM: KVM: add architecture specific hook for capabilities ARM: KVM: perform HYP initilization for hotplugged CPUs ARM: KVM: switch to a dual-step HYP init code ARM: KVM: rework HYP page table freeing ARM: KVM: enforce maximum size for identity mapped code ARM: KVM: move to a KVM provided HYP idmap ...
2013-05-02s390/zcrypt: ap bus rescan problem when toggle crypto adapters on/offIngo Tuchscherer
The bus rescan process was called simultaneously on every device failure. This finally leads into race conditions (double device add/remove actions). This patch protects the rescan area by mutual exclusion and improves ap_config_timer handling Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-02s390/memory hotplug,sclp: get rid of per memory increment usecountHeiko Carstens
Given that the memory block size is always larger or equal to the memory increment size there is no need for a usecount anymore. Each memory increment belongs to exactly one memory block. So get rid of the usecount. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-02s390/mem_detect: limit memory detection loop to "mem=" parameterHeiko Carstens
The current memory detection loop will detect all present memory of a machine. This is true even if the user specified the "mem=" parameter on the kernel command line. This can be a problem since the memory detection may cause a fully populated host page table for the guest, even for those parts of the memory that the guest will never use afterwards. So fix this and only detect memory up to a user supplied "mem=" limit if specified. Reported-by: Michael Johanssen <johanssn@de.ibm.com> Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-02s390/kvm: Change the virtual memory mapping location for Virtio devicesNick Wang
The current location for mapping Virtio devices does not take into consideration of the standby memory. This causes the failure of mapping standby memory since the location for the mapping is already taken by the Virtio devices. To fix the problem, we move the location to beyond the end of standby memory. Signed-off-by: Nick Wang <jfwang@us.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-05-02s390/zcore: calculate real memory size using own get_mem_size functionHeiko Carstens
The zcore device driver makes use of the global visible real_memory_size variable with its odd semantics. Since the zcore device driver already has code in place which calculates the memory size at module load time, use that code to calculate the current memory end value. One user less of the odd real_memory_size variable. Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-02s390/cio: add condev keyword to cio_ignoreSebastian Ott
Provide a 'condev' keyword to cio_ignore to (un)ignore the CCW console device. Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-02s390/cio: add ipldev keyword to cio_ignoreSebastian Ott
Provide an 'ipldev' keyword to cio_ignore to (un)ignore the CCW or FCP based boot device. Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ...
2013-04-29Merge tag 'tty-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver update from Greg Kroah-Hartman: "Here's the big tty/serial driver merge request for 3.10-rc1 Once again, Jiri has a number of TTY driver fixes and cleanups, and Peter Hurley came through with a bunch of ldisc fixes that resolve a number of reported issues. There are some other serial driver cleanups as well. All of these have been in the linux-next tree for a while" * tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits) tty/serial/sirf: fix MODULE_DEVICE_TABLE serial: mxs: drop superfluous {get|put}_device serial: mxs: fix buffer overflow ARM: PL011: add support for extended FIFO-size of PL011-r1p5 serial_core.c: add put_device() after device_find_child() tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe serial: sccnxp: Replace pdata.init/exit with regulator API serial: sccnxp: Do not override device name TTY: pty, fix compilation warning TTY: rocket, fix compilation warning TTY: ircomm: fix DTR being raised on hang up TTY: synclinkmp: fix DTR being raised on hang up TTY: synclink_gt: fix DTR being raised on hang up TTY: synclink: fix DTR being raised on hang up serial: 8250_dw: Fix the stub for dw8250_probe_acpi() serial: 8250_dw: Convert to devm_ioremap() serial: 8250_dw: Set port capabilities based on CPR register serial: 8250_dw: Let ACPI code extract the DMA client info serial: 8250_dw: Support clk framework also with ACPI serial: 8250_dw: Enable runtime PM ...
2013-04-26s390/scm_blk: fix memleak in init functionSebastian Ott
If the allocation of a single request fails the already allocated requests will not be freed. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-26s390/scm_blk: allow more cluster size valuesSebastian Ott
Allow 0 and powers of 2 between 2 and 128 for write_cluster_size. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-26s390/cio: fix irq statisticsSebastian Ott
When we fetch an interrupt on the CCW console using tsch (via ccw_device_wait_idle formerly known as wait_cons_dev) we increment the irq count for the affected interruption class but it is not accounted as an IO interrupt. This is broken since commit b603d258a43b4e7339660bdd3b5c25eacd603e54 "s390: remove superfluous tpi from wait_cons_dev" Fix it so that the sum of the individual interrupts per class matches the number of IO interrupts again. Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-26s390/memory hotplug: prevent offline of active memory incrementsHeiko Carstens
In case a machine supports memory hotplug all active memory increments present at IPL time have been initialized with a "usecount" of 1. This is wrong if the memory increment size is larger than the memory section size of the memory hotplug code. If that is the case the usecount must be initialized with the number of memory sections that fit into one memory increment. Otherwise it is possible to put a memory increment into standby state even if there are still active sections. Afterwards addressing exceptions might happen which cause the kernel to panic. However even worse, if a memory increment was put into standby state and afterwards into active state again, it's contents would have been zeroed, leading to memory corruption. This was only an issue for machines that support standby memory and have at least 256GB memory. This is broken since commit fdb1bb15 "[S390] sclp/memory hotplug: fix initial usecount of increments". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: stable@vger.kernel.org # 2.6.39+ Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-23s390/zcore: Fix HSA copy length for last blockMichael Holzheu
Currently always one page is copied to a user buffer for the last HSA block in memcpy_hsa(). Now the correct length is used. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c drivers/net/ethernet/intel/igb/igb_main.c drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c include/net/scm.h net/batman-adv/routing.c net/ipv4/tcp_input.c The e{uid,gid} --> {uid,gid} credentials fix conflicted with the cleanup in net-next to now pass cred structs around. The be2net driver had a bug fix in 'net' that overlapped with the VLAN interface changes by Patrick McHardy in net-next. An IGB conflict existed because in 'net' the build_skb() support was reverted, and in 'net-next' there was a comment style fix within that code. Several batman-adv conflicts were resolved by making sure that all calls to batadv_is_my_mac() are changed to have a new bat_priv first argument. Eric Dumazet's TS ECR fix in TCP in 'net' conflicted with the F-RTO rewrite in 'net-next', mostly overlapping changes. Thanks to Stephen Rothwell and Antonio Quartulli for help with several of these merge resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22qeth: Fix missing pointer updateStefan Raspl
qeth_hdr_chk_and_bounce() can possibly shift the skb->data pointer. However, the existing code didn't update the hdr pointer, which should point to skb->data, accordingly. Symptoms of this issue are sporadic recoveries. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22qeth: remove unused variableStefan Raspl
remove unused variable Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22qeth: remove cast for kzalloc return valueZhang Yanfei
remove cast for kzalloc return value. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-21qeth: fix VLAN related compilation errorsPatrick McHardy
drivers/s390/net/qeth_l3_main.c: In function 'qeth_l3_add_vlan_mc': >> drivers/s390/net/qeth_l3_main.c:1662:3: error: too few arguments to function '__vlan_find_dev_deep' include/linux/if_vlan.h:88:27: note: declared here drivers/s390/net/qeth_l3_main.c: In function 'qeth_l3_add_vlan_mc6': >> drivers/s390/net/qeth_l3_main.c:1723:3: error: too few arguments to function '__vlan_find_dev_deep' include/linux/if_vlan.h:88:27: note: declared here drivers/s390/net/qeth_l3_main.c: In function 'qeth_l3_free_vlan_addresses4': >> drivers/s390/net/qeth_l3_main.c:1767:2: error: too few arguments to function '__vlan_find_dev_deep' include/linux/if_vlan.h:88:27: note: declared here drivers/s390/net/qeth_l3_main.c: In function 'qeth_l3_free_vlan_addresses6': >> drivers/s390/net/qeth_l3_main.c:1797:2: error: too few arguments to function '__vlan_find_dev_deep' include/linux/if_vlan.h:88:27: note: declared here drivers/s390/net/qeth_l3_main.c: In function 'qeth_l3_process_inbound_buffer': >> drivers/s390/net/qeth_l3_main.c:1980:6: error: too few arguments to function '__vlan_hwaccel_put_tag' include/linux/if_vlan.h:234:31: note: declared here drivers/s390/net/qeth_l3_main.c: In function 'qeth_l3_verify_vlan_dev': >> drivers/s390/net/qeth_l3_main.c:2089:3: error: too few arguments to function '__vlan_find_dev_deep' include/linux/if_vlan.h:88:27: note: declared here Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: prepare for 802.1ad VLAN filtering offloadPatrick McHardy
Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17s390/dasd: fix hanging device after resume with internal error 13Stefan Haberland
If too many ccw requests are pre-build before a suspend/resume cycle the device might not get enough memory to do path verification during resume. Requeue requests to the block device request queue on suspend and free pre-build ccw requests. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/dasd: improve speed of dasdfmtStefan Haberland
Reorganize format IO requests and enable usage of PAV. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/css: move subchannel lock allocationSebastian Ott
cio_validate_subchannel is used to do some basic checks to find out if it's worth to further investigate a subchannel. Move the allocation and initialization of the subchannels locks to css_alloc_subchannel. Clean up the functions involved while at it. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/cio: fix early init counter usageSebastian Ott
Via ccw_device_init_count we keep track of how many devices are in asynchronous device recognition/initialization. For early devices this variable was not only used prior to its initialization but used incorrectly (incremented but never decremented). Fix this by using static initialization for this variable (and friends), make them visible to device.c only, and decrement the counter after recognition of early devices is finished. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/css: remove unused function definitionsSebastian Ott
Make css_probe_device static and remove an unimplemented prototype. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/css: introduce cio_register_early_subchannelsSebastian Ott
Use cio_register_early_subchannels to register early subchannels which are already in use. Call this function before we do the actual subchannel scanning loop. This helps us to get rid of some more special cases regarding the console subchannel. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/cio: get rid of static console deviceSebastian Ott
Remove the static console ccw device (and friends) and use dynamic allocation for these structures. With this change the console device is treated (mostly) like any other ccw device and we can remove some special cases. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/cio: get rid of static console subchannelSebastian Ott
Remove the static console subchannel (and friends) and use dynamic allocation for these structures. With this change the console subchanel is treated (mostly) like any other subchannel and we can remove some special cases. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/cio: split subchannel registrationSebastian Ott
Split the subchannel registration in device_initialize and device_add and move the initialization part inside the allocation function. With this change we can use refcounting during the complete lifespan of a subchannel which is important for devices where we do the actually registration at a later time. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/cio: ccw_device_force_console don't use static variableSebastian Ott
force_console is used to wake up the CCW based console device to print a panic message in case something goes wrong in a suspend or resume cycle. Stop using the static console_subchannel and add a parameter to this function to specify which ccw device we have to wake up. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/cio: wait_cons_dev don't use static variableSebastian Ott
wait_cons_dev is used to busy wait for an interrupt on the console ccw device. Stop using the static console_subchannel and add a parameter to this function to specify on which ccw device/subchannel we have to do the polling. While at it rename the function to ccw_device_wait_idle and move it to device.c Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/cio: Use BITS_TO_LONGS() instead of __BITOPS_WORDS()Akinobu Mita
Use BITS_TO_LONGS() instead of __BITOPS_WORDS() that is considered to be private macro in asm/bitops.h for s390. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/dasd: remove cast for kzalloc return valueZhang Yanfei
remove cast for kzalloc return value. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>