summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)Author
2017-03-30s390/zcrypt: Introduce CEX6 tolerationSumit Semwal
From: Harald Freudenberger <freude@linux.vnet.ibm.com> [ Upstream commit b3e8652bcbfa04807e44708d4d0c8cdad39c9215 ] Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-15s390/dcssblk: fix device size calculation in dcssblk_direct_access()Gerald Schaefer
commit a63f53e34db8b49675448d03ae324f6c5bc04fe6 upstream. Since commit dd22f551 "block: Change direct_access calling convention", the device size calculation in dcssblk_direct_access() is off-by-one. This results in bdev_direct_access() always returning -ENXIO because the returned value is not page aligned. Fix this by adding 1 to the dev_sz calculation. Fixes: dd22f551 ("block: Change direct_access calling convention") Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-15s390/qdio: clear DSCI prior to scanning multiple input queuesJulian Wiedmann
commit 1e4a382fdc0ba8d1a85b758c0811de3a3631085e upstream. For devices with multiple input queues, tiqdio_call_inq_handlers() iterates over all input queues and clears the device's DSCI during each iteration. If the DSCI is re-armed during one of the later iterations, we therefore do not scan the previous queues again. The re-arming also raises a new adapter interrupt. But its handler does not trigger a rescan for the device, as the DSCI has already been erroneously cleared. This can result in queue stalls on devices with multiple input queues. Fix it by clearing the DSCI just once, prior to scanning the queues. As the code is moved in front of the loop, we also need to access the DSCI directly (ie irq->dsci) instead of going via each queue's parent pointer to the same irq. This is not a functional change, and a follow-up patch will clean up the other users. In practice, this bug only affects CQ-enabled HiperSockets devices, ie. devices with sysfs-attribute "hsuid" set. Setting a hsuid is needed for AF_IUCV socket applications that use HiperSockets communication. Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks") Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14scsi: zfcp: fix use-after-free by not tracing WKA port open/close on failed sendSteffen Maier
commit 2dfa6688aafdc3f74efeb1cf05fb871465d67f79 upstream. Dan Carpenter kindly reported: <quote> The patch d27a7cb91960: "zfcp: trace on request for open and close of WKA port" from Aug 10, 2016, leads to the following static checker warning: drivers/s390/scsi/zfcp_fsf.c:1615 zfcp_fsf_open_wka_port() warn: 'req' was already freed. drivers/s390/scsi/zfcp_fsf.c 1609 zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); 1610 retval = zfcp_fsf_req_send(req); 1611 if (retval) 1612 zfcp_fsf_req_free(req); ^^^ Freed. 1613 out: 1614 spin_unlock_irq(&qdio->req_q_lock); 1615 if (req && !IS_ERR(req)) 1616 zfcp_dbf_rec_run_wka("fsowp_1", wka_port, req->req_id); ^^^^^^^^^^^ Use after free. 1617 return retval; 1618 } Same thing for zfcp_fsf_close_wka_port() as well. </quote> Rather than relying on req being NULL (or ERR_PTR) for all cases where we don't want to trace or should not trace, simply check retval which is unconditionally initialized with -EIO != 0 and it can only become 0 on successful retval = zfcp_fsf_req_send(req). With that we can also remove the then again unnecessary unconditional initialization of req which was introduced with that earlier commit. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: d27a7cb91960 ("zfcp: trace on request for open and close of WKA port") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Jens Remus <jremus@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09s390/vmlogrdr: fix IUCV buffer allocationGerald Schaefer
commit 5457e03de918f7a3e294eb9d26a608ab8a579976 upstream. The buffer for iucv_message_receive() needs to be below 2 GB. In __iucv_message_receive(), the buffer address is casted to an u32, which would result in either memory corruption or an addressing exception when using addresses >= 2 GB. Fix this by using GFP_DMA for the buffer allocation. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09scsi: zfcp: fix rport unblock race with LUN recoverySteffen Maier
commit 6f2ce1c6af37191640ee3ff6e8fc39ea10352f4c upstream. It is unavoidable that zfcp_scsi_queuecommand() has to finish requests with DID_IMM_RETRY (like fc_remote_port_chkready()) during the time window when zfcp detected an unavailable rport but fc_remote_port_delete(), which is asynchronous via zfcp_scsi_schedule_rport_block(), has not yet blocked the rport. However, for the case when the rport becomes available again, we should prevent unblocking the rport too early. In contrast to other FCP LLDDs, zfcp has to open each LUN with the FCP channel hardware before it can send I/O to a LUN. So if a port already has LUNs attached and we unblock the rport just after port recovery, recoveries of LUNs behind this port can still be pending which in turn force zfcp_scsi_queuecommand() to unnecessarily finish requests with DID_IMM_RETRY. This also opens a time window with unblocked rport (until the followup LUN reopen recovery has finished). If a scsi_cmnd timeout occurs during this time window fc_timed_out() cannot work as desired and such command would indeed time out and trigger scsi_eh. This prevents a clean and timely path failover. This should not happen if the path issue can be recovered on FC transport layer such as path issues involving RSCNs. Fix this by only calling zfcp_scsi_schedule_rport_register(), to asynchronously trigger fc_remote_port_add(), after all LUN recoveries as children of the rport have finished and no new recoveries of equal or higher order were triggered meanwhile. Finished intentionally includes any recovery result no matter if successful or failed (still unblock rport so other successful LUNs work). For simplicity, we check after each finished LUN recovery if there is another LUN recovery pending on the same port and then do nothing. We handle the special case of a successful recovery of a port without LUN children the same way without changing this case's semantics. For debugging we introduce 2 new trace records written if the rport unblock attempt was aborted due to still unfinished or freshly triggered recovery. The records are only written above the default trace level. Benjamin noticed the important special case of new recovery that can be triggered between having given up the erp_lock and before calling zfcp_erp_action_cleanup() within zfcp_erp_strategy(). We must avoid the following sequence: ERP thread rport_work other context ------------------------- -------------- -------------------------------- port is unblocked, rport still blocked, due to pending/running ERP action, so ((port->status & ...UNBLOCK) != 0) and (port->rport == NULL) unlock ERP zfcp_erp_action_cleanup() case ZFCP_ERP_ACTION_REOPEN_LUN: zfcp_erp_try_rport_unblock() ((status & ...UNBLOCK) != 0) [OLD!] zfcp_erp_port_reopen() lock ERP zfcp_erp_port_block() port->status clear ...UNBLOCK unlock ERP zfcp_scsi_schedule_rport_block() port->rport_task = RPORT_DEL queue_work(rport_work) zfcp_scsi_rport_work() (port->rport_task != RPORT_ADD) port->rport_task = RPORT_NONE zfcp_scsi_rport_block() if (!port->rport) return zfcp_scsi_schedule_rport_register() port->rport_task = RPORT_ADD queue_work(rport_work) zfcp_scsi_rport_work() (port->rport_task == RPORT_ADD) port->rport_task = RPORT_NONE zfcp_scsi_rport_register() (port->rport == NULL) rport = fc_remote_port_add() port->rport = rport; Now the rport was erroneously unblocked while the zfcp_port is blocked. This is another situation we want to avoid due to scsi_eh potential. This state would at least remain until the new recovery from the other context finished successfully, or potentially forever if it failed. In order to close this race, we take the erp_lock inside zfcp_erp_try_rport_unblock() when checking the status of zfcp_port or LUN. With that, the possible corresponding rport state sequences would be: (unblock[ERP thread],block[other context]) if the ERP thread gets erp_lock first and still sees ((port->status & ...UNBLOCK) != 0), (block[other context],NOP[ERP thread]) if the ERP thread gets erp_lock after the other context has already cleard ...UNBLOCK from port->status. Since checking fields of struct erp_action is unsafe because they could have been overwritten (re-used for new recovery) meanwhile, we only check status of zfcp_port and LUN since these are only changed under erp_lock elsewhere. Regarding the check of the proper status flags (port or port_forced are similar to the shown adapter recovery): [zfcp_erp_adapter_shutdown()] zfcp_erp_adapter_reopen() zfcp_erp_adapter_block() * clear UNBLOCK ---------------------------------------+ zfcp_scsi_schedule_rports_block() | write_lock_irqsave(&adapter->erp_lock, flags);-------+ | zfcp_erp_action_enqueue() | | zfcp_erp_setup_act() | | * set ERP_INUSE -----------------------------------|--|--+ write_unlock_irqrestore(&adapter->erp_lock, flags);--+ | | .context-switch. | | zfcp_erp_thread() | | zfcp_erp_strategy() | | write_lock_irqsave(&adapter->erp_lock, flags);------+ | | ... | | | zfcp_erp_strategy_check_target() | | | zfcp_erp_strategy_check_adapter() | | | zfcp_erp_adapter_unblock() | | | * set UNBLOCK -----------------------------------|--+ | zfcp_erp_action_dequeue() | | * clear ERP_INUSE ---------------------------------|-----+ ... | write_unlock_irqrestore(&adapter->erp_lock, flags);-+ Hence, we should check for both UNBLOCK and ERP_INUSE because they are interleaved. Also we need to explicitly check ERP_FAILED for the link down case which currently does not clear the UNBLOCK flag in zfcp_fsf_link_down_info_eval(). Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 8830271c4819 ("[SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rport") Fixes: a2fa0aede07c ("[SCSI] zfcp: Block FC transport rports early on errors") Fixes: 5f852be9e11d ("[SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI") Fixes: 338151e06608 ("[SCSI] zfcp: make use of fc_remote_port_delete when target port is unavailable") Fixes: 3859f6a248cb ("[PATCH] zfcp: add rports to enable scsi_add_device to work again") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09scsi: zfcp: do not trace pure benign residual HBA responses at default levelSteffen Maier
commit 56d23ed7adf3974f10e91b643bd230e9c65b5f79 upstream. Since quite a while, Linux issues enough SCSI commands per scsi_device which successfully return with FCP_RESID_UNDER, FSF_FCP_RSP_AVAILABLE, and SAM_STAT_GOOD. This floods the HBA trace area and we cannot see other and important HBA trace records long enough. Therefore, do not trace HBA response errors for pure benign residual under counts at the default trace level. This excludes benign residual under count combined with other validity bits set in FCP_RSP_IU, such as FCP_SNS_LEN_VAL. For all those other cases, we still do want to see both the HBA record and the corresponding SCSI record by default. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09scsi: zfcp: fix use-after-"free" in FC ingress path after TMFBenjamin Block
commit dac37e15b7d511e026a9313c8c46794c144103cd upstream. When SCSI EH invokes zFCP's callbacks for eh_device_reset_handler() and eh_target_reset_handler(), it expects us to relent the ownership over the given scsi_cmnd and all other scsi_cmnds within the same scope - LUN or target - when returning with SUCCESS from the callback ('release' them). SCSI EH can then reuse those commands. We did not follow this rule to release commands upon SUCCESS; and if later a reply arrived for one of those supposed to be released commands, we would still make use of the scsi_cmnd in our ingress tasklet. This will at least result in undefined behavior or a kernel panic because of a wrong kernel pointer dereference. To fix this, we NULLify all pointers to scsi_cmnds (struct zfcp_fsf_req *)->data in the matching scope if a TMF was successful. This is done under the locks (struct zfcp_adapter *)->abort_lock and (struct zfcp_reqlist *)->lock to prevent the requests from being removed from the request-hashtable, and the ingress tasklet from making use of the scsi_cmnd-pointer in zfcp_fsf_fcp_cmnd_handler(). For cases where a reply arrives during SCSI EH, but before we get a chance to NULLify the pointer - but before we return from the callback -, we assume that the code is protected from races via the CAS operation in blk_complete_request() that is called in scsi_done(). The following stacktrace shows an example for a crash resulting from the previous behavior: Unable to handle kernel pointer dereference at virtual kernel address fffffee17a672000 Oops: 0038 [#1] SMP CPU: 2 PID: 0 Comm: swapper/2 Not tainted task: 00000003f7ff5be0 ti: 00000003f3d38000 task.ti: 00000003f3d38000 Krnl PSW : 0404d00180000000 00000000001156b0 (smp_vcpu_scheduled+0x18/0x40) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 EA:3 Krnl GPRS: 000000200000007e 0000000000000000 fffffee17a671fd8 0000000300000015 ffffffff80000000 00000000005dfde8 07000003f7f80e00 000000004fa4e800 000000036ce8d8f8 000000036ce8d9c0 00000003ece8fe00 ffffffff969c9e93 00000003fffffffd 000000036ce8da10 00000000003bf134 00000003f3b07918 Krnl Code: 00000000001156a2: a7190000 lghi %r1,0 00000000001156a6: a7380015 lhi %r3,21 #00000000001156aa: e32050000008 ag %r2,0(%r5) >00000000001156b0: 482022b0 lh %r2,688(%r2) 00000000001156b4: ae123000 sigp %r1,%r2,0(%r3) 00000000001156b8: b2220020 ipm %r2 00000000001156bc: 8820001c srl %r2,28 00000000001156c0: c02700000001 xilf %r2,1 Call Trace: ([<0000000000000000>] 0x0) [<000003ff807bdb8e>] zfcp_fsf_fcp_cmnd_handler+0x3de/0x490 [zfcp] [<000003ff807be30a>] zfcp_fsf_req_complete+0x252/0x800 [zfcp] [<000003ff807c0a48>] zfcp_fsf_reqid_check+0xe8/0x190 [zfcp] [<000003ff807c194e>] zfcp_qdio_int_resp+0x66/0x188 [zfcp] [<000003ff80440c64>] qdio_kick_handler+0xdc/0x310 [qdio] [<000003ff804463d0>] __tiqdio_inbound_processing+0xf8/0xcd8 [qdio] [<0000000000141fd4>] tasklet_action+0x9c/0x170 [<0000000000141550>] __do_softirq+0xe8/0x258 [<000000000010ce0a>] do_softirq+0xba/0xc0 [<000000000014187c>] irq_exit+0xc4/0xe8 [<000000000046b526>] do_IRQ+0x146/0x1d8 [<00000000005d6a3c>] io_return+0x0/0x8 [<00000000005d6422>] vtime_stop_cpu+0x4a/0xa0 ([<0000000000000000>] 0x0) [<0000000000103d8a>] arch_cpu_idle+0xa2/0xb0 [<0000000000197f94>] cpu_startup_entry+0x13c/0x1f8 [<0000000000114782>] smp_start_secondary+0xda/0xe8 [<00000000005d6efe>] restart_int_handler+0x56/0x6c [<0000000000000000>] 0x0 Last Breaking-Event-Address: [<00000000003bf12e>] arch_spin_lock_wait+0x56/0xb0 Suggested-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com> Fixes: ea127f9754 ("[PATCH] s390 (7/7): zfcp host adapter.") (tglx/history.git) Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-31s390/con3270: fix insufficient space paddingSascha Silbe
commit 6cd997db911f28f2510b771691270c52b63ed2e6 upstream. con3270 contains an optimisation that reduces the amount of data to be transmitted to the 3270 terminal by putting a Repeat to Address (RA) order into the data stream. The RA order itself takes up space, so con3270 only uses it if there's enough space left in the line buffer. Otherwise it just pads out the line manually. For lines that were _just_ short enough that the RA order still fit in the line buffer, the line was instead padded with an insufficient amount of spaces. This was caused by examining the size of the allocated line buffer rather than the length of the string to be displayed. For con3270_cline_end(), we just compare against the line length. For con3270_update_string() however that isn't available anymore, so we check whether the Repeat to Address order is present. Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git) Tested-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Tested-by: Yang Chen <bjcyang@linux.vnet.ibm.com> Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-31s390/con3270: fix use of uninitialised dataSascha Silbe
commit c14f2aac7aa147861793eed9f41f91dd530f0be1 upstream. con3270 contains an optimisation that reduces the amount of data to be transmitted to the 3270 terminal by putting a Repeat to Address (RA) order into the data stream. The RA order itself takes up space, so con3270 only uses it if there's enough space left in the line buffer. Otherwise it just pads out the line manually. For lines too long to include the RA order, one byte was left uninitialised. This was caused by an off-by-one bug in the loop that pads out the line. Since the buffer is allocated from a common pool, the single byte left uninitialised contained some previous buffer content. Usually this was just a space or some character (which can result in clutter but is otherwise harmless). Sometimes, however, it was a Repeat to Address order, messing up the entire screen layout and causing the display to send the entire buffer content on every keystroke. Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git) Reported-by: Liu Jing <liujbjl@linux.vnet.ibm.com> Tested-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Tested-by: Yang Chen <bjcyang@linux.vnet.ibm.com> Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-31s390/cio: fix accidental interrupt enabling during resumeSebastian Ott
commit d53c51f26145657aa7c55fa396f93677e613548d upstream. Since commit 9f3d6d7 chsc_get_channel_measurement_chars is called with interrupts disabled during resume from hibernate. Since this function used spin_unlock_irq, interrupts have been enabled accidentally. Fix this by using the irqsave variant. Since we can't guarantee the IRQ-enablement state for all (future/ external) callers, change the locking in related functions to prevent similar bugs in the future. Fixes: 9f3d6d7 ("s390/cio: update measurement characteristics") Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28scsi: zfcp: spin_lock_irqsave() is not nestableDan Carpenter
commit e7cb08e894a0b876443ef8fdb0706575dc00a5d2 upstream. We accidentally overwrite the original saved value of "flags" so that we can't re-enable IRQs at the end of the function. Presumably this function is mostly called with IRQs disabled or it would be obvious in testing. Fixes: aceeffbb59bb ("zfcp: trace full payload of all SAN records (req,resp,iels)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28zfcp: trace full payload of all SAN records (req,resp,iels)Steffen Maier
commit aceeffbb59bb91404a0bda32a542d7ebf878433a upstream. This was lost with commit 2c55b750a884b86dea8b4cc5f15e1484cc47a25c ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.") but is necessary for problem determination, e.g. to see the currently active zone set during automatic port scan. For the large GPN_FT response (4 pages), save space by not dumping any empty residual entries. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 2c55b750a884 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.") Reviewed-by: Alexey Ishchuk <aishchuk@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28zfcp: fix payload trace length for SAN request&responseSteffen Maier
commit 94db3725f049ead24c96226df4a4fb375b880a77 upstream. commit 2c55b750a884b86dea8b4cc5f15e1484cc47a25c ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.") started to add FC_CT_HDR_LEN which made zfcp dump random data out of bounds for RSPN GS responses because u.rspn.rsp is the largest and last field in the union of struct zfcp_fc_req. Other request/response types only happened to stay within bounds due to the padding of the union or due to the trace capping of u.gspn.rsp to ZFCP_DBF_SAN_MAX_PAYLOAD. Timestamp : ... Area : SAN Subarea : 00 Level : 1 Exception : - CPU id : .. Caller : ... Record id : 2 Tag : fsscth2 Request id : 0x... Destination ID : 0x00fffffc Payload short : 01000000 fc020000 80020000 00000000 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx <=== 00000000 00000000 00000000 00000000 Payload length : 32 <=== struct zfcp_fc_req { [0] struct zfcp_fsf_ct_els ct_els; [56] struct scatterlist sg_req; [96] struct scatterlist sg_rsp; union { struct {req; rsp;} adisc; SIZE: 28+28= 56 struct {req; rsp;} gid_pn; SIZE: 24+20= 44 struct {rspsg; req;} gpn_ft; SIZE: 40*4+20=180 struct {req; rsp;} gspn; SIZE: 20+273= 293 struct {req; rsp;} rspn; SIZE: 277+16= 293 [136] } u; } SIZE: 432 Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 2c55b750a884 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.") Reviewed-by: Alexey Ishchuk <aishchuk@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28zfcp: fix D_ID field with actual value on tracing SAN responsesSteffen Maier
commit 771bf03537ddfa4a4dde62ef9dfbc82e4f77ab20 upstream. With commit 2c55b750a884b86dea8b4cc5f15e1484cc47a25c ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.") we lost the N_Port-ID where an ELS response comes from. With commit 7c7dc196814b9e1d5cc254dc579a5fa78ae524f7 ("[SCSI] zfcp: Simplify handling of ct and els requests") we lost the N_Port-ID where a CT response comes from. It's especially useful if the request SAN trace record with D_ID was already lost due to trace buffer wrap. GS uses an open WKA port handle and ELS just a D_ID, and only for ELS we could get D_ID from QTCB bottom via zfcp_fsf_req. To cover both cases, add a new field to zfcp_fsf_ct_els and fill it in on request to use in SAN response trace. Strictly speaking the D_ID on SAN response is the FC frame's S_ID. We don't need a field for the other end which is always us. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 2c55b750a884 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.") Fixes: 7c7dc196814b ("[SCSI] zfcp: Simplify handling of ct and els requests") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28zfcp: restore tracing of handle for port and LUN with HBA recordsSteffen Maier
commit 7c964ffe586bc0c3d9febe9bf97a2e4b2866e5b7 upstream. This information was lost with commit a54ca0f62f953898b05549391ac2a8a4dad6482b ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") but is required to debug e.g. invalid handle situations. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28zfcp: trace on request for open and close of WKA portSteffen Maier
commit d27a7cb91960cf1fdd11b10071e601828cbf4b1f upstream. Since commit a54ca0f62f953898b05549391ac2a8a4dad6482b ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") HBA records no longer contain WWPN, D_ID, or LUN to reduce duplicate information which is already in REC records. In contrast to "regular" target ports, we don't use recovery to open WKA ports such as directory/nameserver, so we don't get REC records. Therefore, introduce pseudo REC running records without any actual recovery action but including D_ID of WKA port on open/close. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28zfcp: restore: Dont use 0 to indicate invalid LUN in rec traceSteffen Maier
commit 0102a30a6ff60f4bb4c07358ca3b1f92254a6c25 upstream. bring back commit d21e9daa63e009ce5b87bbcaa6d11ce48e07bbbe ("[SCSI] zfcp: Dont use 0 to indicate invalid LUN in rec trace") which was lost with commit ae0904f60fab7cb20c48d32eefdd735e478b91fb ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.") Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: ae0904f60fab ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28zfcp: retain trace level for SCSI and HBA FSF response recordsSteffen Maier
commit 35f040df97fa0e94c7851c054ec71533c88b4b81 upstream. While retaining the actual filtering according to trace level, the following commits started to write such filtered records with a hardcoded record level of 1 instead of the actual record level: commit 250a1352b95e1db3216e5c5d4f4365bea5122f4a ("[SCSI] zfcp: Redesign of the debug tracing for SCSI records.") commit a54ca0f62f953898b05549391ac2a8a4dad6482b ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") Now we can distinguish written records again for offline level filtering. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 250a1352b95e ("[SCSI] zfcp: Redesign of the debug tracing for SCSI records.") Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28zfcp: close window with unblocked rport during rport goneSteffen Maier
commit 4eeaa4f3f1d6c47b69f70e222297a4df4743363e upstream. On a successful end of reopen port forced, zfcp_erp_strategy_followup_success() re-uses the port erp_action and the subsequent zfcp_erp_action_cleanup() now sees ZFCP_ERP_SUCCEEDED with erp_action->action==ZFCP_ERP_ACTION_REOPEN_PORT instead of ZFCP_ERP_ACTION_REOPEN_PORT_FORCED but must not perform zfcp_scsi_schedule_rport_register(). We can detect this because the fresh port reopen erp_action is in its very first step ZFCP_ERP_STEP_UNINITIALIZED. Otherwise this opens a time window with unblocked rport (until the followup port reopen recovery would block it again). If a scsi_cmnd timeout occurs during this time window fc_timed_out() cannot work as desired and such command would indeed time out and trigger scsi_eh. This prevents a clean and timely path failover. This should not happen if the path issue can be recovered on FC transport layer such as path issues involving RSCNs. Also, unnecessary and repeated DID_IMM_RETRY for pending and undesired new requests occur because internally zfcp still has its zfcp_port blocked. As follow-on errors with scsi_eh, it can cause, in the worst case, permanently lost paths due to one of: sd <scsidev>: [<scsidisk>] Medium access timeout failure. Offlining disk! sd <scsidev>: Device offlined - not ready after error recovery For fix validation and to aid future debugging with other recoveries we now also trace (un)blocking of rports. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 5767620c383a ("[SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCED") Fixes: a2fa0aede07c ("[SCSI] zfcp: Block FC transport rports early on errors") Fixes: 5f852be9e11d ("[SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI") Fixes: 338151e06608 ("[SCSI] zfcp: make use of fc_remote_port_delete when target port is unavailable") Fixes: 3859f6a248cb ("[PATCH] zfcp: add rports to enable scsi_add_device to work again") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28zfcp: fix ELS/GS request&response length for hardware data routerSteffen Maier
commit 70369f8e15b220f50a16348c79a61d3f7054813c upstream. In the hardware data router case, introduced with kernel 3.2 commit 86a9668a8d29 ("[SCSI] zfcp: support for hardware data router") the ELS/GS request&response length needs to be initialized as in the chained SBAL case. Otherwise, the FCP channel rejects ELS requests with FSF_REQUEST_SIZE_TOO_LARGE. Such ELS requests can be issued by user space through BSG / HBA API, or zfcp itself uses ADISC ELS for remote port link test on RSCN. The latter can cause a short path outage due to unnecessary remote target port recovery because the always failing ADISC cannot detect extremely short path interruptions beyond the local FCP channel. Below example is decoded with zfcpdbf from s390-tools: Timestamp : ... Area : SAN Subarea : 00 Level : 1 Exception : - CPU id : .. Caller : zfcp_dbf_san_req+0408 Record id : 1 Tag : fssels1 Request id : 0x<reqid> Destination ID : 0x00<target d_id> Payload info : 52000000 00000000 <our wwpn > [ADISC] <our wwnn > 00<s_id> 00000000 00000000 00000000 00000000 00000000 Timestamp : ... Area : HBA Subarea : 00 Level : 1 Exception : - CPU id : .. Caller : zfcp_dbf_hba_fsf_res+0740 Record id : 1 Tag : fs_ferr Request id : 0x<reqid> Request status : 0x00000010 FSF cmnd : 0x0000000b [FSF_QTCB_SEND_ELS] FSF sequence no: 0x... FSF issued : ... FSF stat : 0x00000061 [FSF_REQUEST_SIZE_TOO_LARGE] FSF stat qual : 00000000 00000000 00000000 00000000 Prot stat : 0x00000100 Prot stat qual : 00000000 00000000 00000000 00000000 Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 86a9668a8d29 ("[SCSI] zfcp: support for hardware data router") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28zfcp: fix fc_host port_type with NPIVSteffen Maier
commit bd77befa5bcff8c51613de271913639edf85fbc2 upstream. For an NPIV-enabled FCP device, zfcp can erroneously show "NPort (fabric via point-to-point)" instead of "NPIV VPORT" for the port_type sysfs attribute of the corresponding fc_host. s390-tools that can be affected are dbginfo.sh and ziomon. zfcp_fsf_exchange_config_evaluate() ignores fsf_qtcb_bottom_config.connection_features indicating NPIV and only sets fc_host_port_type to FC_PORTTYPE_NPORT if fsf_qtcb_bottom_config.fc_topology is FSF_TOPO_FABRIC. Only the independent zfcp_fsf_exchange_port_evaluate() evaluates connection_features to overwrite fc_host_port_type to FC_PORTTYPE_NPIV in case of NPIV. Code was introduced with upstream kernel 2.6.30 commit 0282985da5923fa6365adcc1a1586ae0c13c1617 ("[SCSI] zfcp: Report fc_host_port_type as NPIV"). This works during FCP device recovery (such as set online) because it performs FSF_QTCB_EXCHANGE_CONFIG_DATA followed by FSF_QTCB_EXCHANGE_PORT_DATA in sequence. However, the zfcp-specific scsi host sysfs attributes "requests", "megabytes", or "seconds_active" trigger only zfcp_fsf_exchange_config_evaluate() resetting fc_host port_type to FC_PORTTYPE_NPORT despite NPIV. The zfcp-specific scsi host sysfs attribute "utilization" triggers only zfcp_fsf_exchange_port_evaluate() correcting the fc_host port_type again in case of NPIV. Evaluate fsf_qtcb_bottom_config.connection_features in zfcp_fsf_exchange_config_evaluate() where it belongs to. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 0282985da592 ("[SCSI] zfcp: Report fc_host_port_type as NPIV") Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15s390/sclp_ctl: fix potential information leak with /dev/sclpMartin Schwidefsky
commit 532c34b5fbf1687df63b3fcd5b2846312ac943c6 upstream. The sclp_ctl_ioctl_sccb function uses two copy_from_user calls to retrieve the sclp request from user space. The first copy_from_user fetches the length of the request which is stored in the first two bytes of the request. The second copy_from_user gets the complete sclp request, but this copies the length field a second time. A malicious user may have changed the length in the meantime. Reported-by: Pengfei Wang <wpengfeinudt@gmail.com> Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Juerg Haefliger <juerg.haefliger@hpe.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15s390/cio: update measurement characteristicsSebastian Ott
[ Upstream commit 9f3d6d7a40a178b8a5b5274f4e55fec8c30147c9 ] Per channel path measurement characteristics are obtained during channel path registration. However if some properties of a channel path change we don't update the measurement characteristics. Make sure to update the characteristics when we change the properties of a channel path or receive a notification from FW about such a change. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15s390/cio: ensure consistent measurement stateSebastian Ott
[ Upstream commit 61f0bfcf8020f02eb09adaef96745d1c1d1b3623 ] Make sure that in all cases where we could not obtain measurement characteristics the associated fields are set to invalid values. Note: without this change the "shared" capability of a channel path for which we could not obtain the measurement characteristics was incorrectly displayed as 0 (not shared). We will now correctly report "unknown" in this case. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15s390/cio: fix measurement characteristics memleakSebastian Ott
[ Upstream commit 0d9bfe9123cfde59bf5c2e375b59d2a7d5061c4c ] Measurement characteristics are allocated during channel path registration but not freed during deregistration. Fix this by embedding these characteristics inside struct channel_path. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15qeth: initialize net_device with carrier offUrsula Braun
[ Upstream commit e5ebe63214d44d4dcf43df02edf3613e04d671b9 ] /sys/class/net/<interface>/operstate for an active qeth network interface offen shows "unknown", which translates to "state UNKNOWN in output of "ip link show". It is caused by a missing initialization of the __LINK_STATE_NOCARRIER bit in the net_device state field. This patch adds a netif_carrier_off() invocation when creating the net_device for a qeth device. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Acked-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reference-ID: Bugzilla 133209 Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07s390/dasd: fix hanging device after clear subchannelStefan Haberland
commit 9ba333dc55cbb9523553df973adb3024d223e905 upstream. When a device is in a status where CIO has killed all I/O by itself the interrupt for a clear request may not contain an irb to determine the clear function. Instead it contains an error pointer -EIO. This was ignored by the DASD int_handler leading to a hanging device waiting for a clear interrupt. Handle -EIO error pointer correctly for requests that are clear pending and treat the clear as successful. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20s390/cio: allow to reset channel measurement blockSebastian Ott
commit 0f5d050ceaa31b2229102211d60c149f920df3aa upstream. Prior to commit 1bc6664bdfb949bc69a08113801e7d6acbf6bc3f a call to enable_cmf for a device for which channel measurement was already enabled resulted in a reset of the measurement data. What looked like bugs at the time (a 2nd allocation was triggered but failed, reset was called regardless of previous failures, and errors have not been reported to userspace) was actually something at least one userspace tool depended on. Restore that behavior in a sane way. Fixes: 1bc6664bdfb ("s390/cio: use device_lock during cmb activation") Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10qeth: delete napi struct when removing a qeth deviceUrsula Braun
commit 7831b4ff0d926e0deeaabef9db8800ed069a2757 upstream. A qeth_card contains a napi_struct linked to the net_device during device probing. This struct must be deleted when removing the qeth device, otherwise Panic on oops can occur when qeth devices are repeatedly removed and added. Fixes: a1c3ed4c9ca ("qeth: NAPI support for l2 and l3 discipline") Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Tested-by: Alexander Klein <ALKL@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-16s390/dasd: fix diag 0x250 inline assemblyHeiko Carstens
commit ce0c12b633846a47e103842149a5bac2e5d261ec upstream. git commit 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls") added function calls to gather diagnose statistics. In case of the dasd diag driver the function call was added between a register asm statement which initialized register r2 and the inline assembly itself. The function call clobbers the contents of register r2 and therefore the diag 0x250 call behaves in a more or less random way. Fix this by extracting the function call into a separate function like we do everywhere else. Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls") Reported-and-tested-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03s390/dasd: fix performance dropStefan Haberland
commit 12d319b920fa673a4d5e7c1785c5dc82dcd15257 upstream. Commit ca369d51b ("sd: Fix device-imposed transfer length limits") introduced a new queue limit max_dev_sectors which limits the maximum sectors for requests. The default value leads to small dasd requests and therefor to a performance drop. Set the max_dev_sectors value to the same value as the max_hw_sectors to use the maximum available request size for DASD devices. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03s390/dasd: fix refcount for PAV reassignmentStefan Haberland
commit 9d862ababb609439c5d6987f6d3ddd09e703aa0b upstream. Add refcount to the DASD device when a summary unit check worker is scheduled. This prevents that the device is set offline with worker in place. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03s390/dasd: prevent incorrect length error under z/VM after PAV changesStefan Haberland
commit 020bf042e5b397479c1174081b935d0ff15d1a64 upstream. The channel checks the specified length and the provided amount of data for CCWs and provides an incorrect length error if the size does not match. Under z/VM with simulation activated the length may get changed. Having the suppress length indication bit set is stated as good CCW coding practice and avoids errors under z/VM. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Two late bug fixes for kernel 4.4. Merry Christmas" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dis: Fix handling of format specifiers s390/zcrypt: Fix AP queue handling if queue is full
2015-12-17virtio/s390: handle error values in irbCornelia Huck
The common I/O layer may pass an error value as the irb in the device's interrupt handler (for classic channel I/O). This won't happen in current virtio-ccw implementations, but it's better to be safe than sorry. Let's just return the error conveyed by the irb and clear any possible pending I/O indications. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-11-27s390/zcrypt: Fix AP queue handling if queue is fullIngo Tuchscherer
When the AP queue depth of requests was reached additional requests have been ignored. These request are stuck in the request queue. The AP queue handling now push the next waiting request into the queue after fetching a previous serviced and finished reply. Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Assorted bug fixes, the mlock2 system call gets added, and one improvement. The boot from dasd devices is now possible from a wider range of devices" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: remove SALIPL loader s390: wire up mlock2 system call s390: remove g5 elf platform support s390: avoid cache aliasing under z/VM and KVM s390/sclp: _sclp_wait_int(): retain full PSW mask s390/zcrypt: Fix initialisation when zcrypt is built-in s390/zcrypt: Fix kernel crash on systems without AP bus support s390: add support for ipl devices in subchannel sets > 0 s390/ipl: fix out of bounds access in scpdata_write s390/pci_dma: improve debugging of errors during dma map s390/pci_dma: handle dma table failures s390/pci_dma: unify label of invalid translation table entries s390/syscalls: remove system call number calculation s390/cio: simplify css_generate_pgid s390/diag: add a s390 prefix to the diagnose trace point s390/head: fix error message on unsupported hardware
2015-11-11s390/zcrypt: Fix initialisation when zcrypt is built-inSascha Silbe
ap_bus and zcrypt_api assumed module information to always be present and initialisation to be done in module loading order (symbol dependencies). These assumptions don't hold if zcrypt is built-in; THIS_MODULE will be NULL in this case and init call order is linker order, i.e. Makefile order. Fix initialisation order by ordering the object files in the Makefile according to their dependencies, like the module loader would do. Fix message type registration by using a dedicated "name" field rather than piggy-backing on the module ("owner") information. There's no change to the requirement that module name and msgtype name are identical. The existing name macros are used. We don't need any special code for dealing with the drivers being built-in; the generic module support code already does the right thing. Test results: 1. CONFIG_MODULES=y, CONFIG_ZCRYPT=y KVM: boots, no /sys/bus/ap (expected) LPAR with CEX5: boots, /sys/bus/ap/devices/card*/type present 2. CONFIG_MODULES=y, CONFIG_ZCRYPT=m=: KVM: boots, loading zcrypt_cex4 (and ap) fails (expected) LPAR with CEX5: boots, loading =zcrypt_cex4= succeeds, /sys/bus/ap/devices/card*/type present after explicit module loading 3. CONFIG_MODULES unset, CONFIG_ZCRYPT=y: KVM: boots, no /sys/bus/ap (expected) LPAR with CEX5: boots, /sys/bus/ap/devices/card*/type present No further testing (user-space functionality) was done. Fixes: 3b6245fd303f ("s390/zcrypt: Separate msgtype implementation from card modules.") Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-11s390/zcrypt: Fix kernel crash on systems without AP bus supportSascha Silbe
On systems without AP bus (e.g. KVM) the kernel crashes during init calls when zcrypt is built-in: kernel BUG at drivers/base/driver.c:153! illegal operation: 0001 ilc:1 [#1] SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.2.0+ #221 task: 0000000010a40000 ti: 0000000010a48000 task.ti:0000000010a48000 Krnl PSW : 0704c00180000000 0000000000592bd6(driver_register+0x106/0x140) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 0000000000000012 0000000000000000 0000000000c45328 0000000000c44e30 00000000009ef63c 000000000067f598 0000000000cf3c58 0000000000000000 000000000000007b 0000000000cb1030 0000000000000002 0000000000000000 0000000000ca8580 0000000010306700 00000000001001d8 0000000010a4bd88 Krnl Code: 0000000000592bc6: f0b00004ebcf srp 4(12,%r0),3023(%r14),0 0000000000592bcc: f0a0000407f4 srp 4(11,%r0),2036,0 #0000000000592bd2: a7f40001 brc 15,592bd4 >0000000000592bd6: e330d0000004 lg %r3,0(%r13) 0000000000592bdc: c0200021edfd larl %r2,9d07d6 0000000000592be2: c0e500126d8f brasl %r14,7e0700 0000000000592be8: e330d0080004 lg %r3,8(%r13) 0000000000592bee: a7f4ffab brc 15,592b44 Call Trace: ([<00000000001001c8>] do_one_initcall+0x90/0x1d0) [<0000000000c6dd34>] kernel_init_freeable+0x1e4/0x2a0 [<00000000007db53a>] kernel_init+0x2a/0x120 [<00000000007e8ece>] kernel_thread_starter+0x6/0xc [<00000000007e8ec8>] kernel_thread_starter+0x0/0xc Last Breaking-Event-Address: [<0000000000592bd2>] driver_register+0x102/0x140 When zcrypt is built as a module, the module loader ensures that the driver modules cannot be loaded if the AP bus module returns an error during initialisation. But if zcrypt and the driver are built-in, the driver is getting initialised even if the AP bus initialisation failed. The driver invokes ap_driver_register() during initialisation, which then causes operations on uninitialised data structures to be performed. Explicitly protect ap_driver_register() by introducing an "initialised" flag that gets set iff the AP bus initialisation was successful. When the AP bus initialisation failed, ap_driver_register() will error out with -ENODEV, causing the driver initialisation to fail as well. Test results: 1. Inside KVM (no AP bus), zcrypt built-in Boots. /sys/bus/ap not present (expected). 2. Inside KVM (no AP bus), zcrypt as module Boots. Loading zcrypt_cex4 fails because loading ap_bus fails (expected). 3. On LPAR with CEX5, zcrypt built-in Boots. /sys/bus/ap/devices/card* present but .../card*/type missing (i.e. zcrypt_device_register() fails, unrelated issue). 4. On LPAR with CEX5, zcrypt as module Boots. Loading zcrypt_cex4 successful, /sys/bus/ap/devices/card*/type present. No further testing (user-space functionality) was done. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-11s390: add support for ipl devices in subchannel sets > 0Sebastian Ott
Allow to ipl from CCW based devices residing in any subchannel set. Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-09s390/cio: simplify css_generate_pgidSebastian Ott
Simplify the css_generate_pgid code by using stap() independent of CONFIG_SMP. For !CONFIG_SMP builds stap() will deliver the address of the cpu we IPL'ed from (which can be != 0). Note: the ifdef was likely added to be compatible with _very_ old machines which we don't support anyway. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-07block: change ->make_request_fn() and users to return a queue cookieJens Axboe
No functional changes in this patch, but it prepares us for returning a more useful cookie related to the IO that was queued up. Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "There is only one new feature in this pull for the 4.4 merge window, most of it is small enhancements, cleanup and bug fixes: - Add the s390 backend for the software dirty bit tracking. This adds two new pgtable functions pte_clear_soft_dirty and pmd_clear_soft_dirty which is why there is a hit to arch/x86/include/asm/pgtable.h in this pull request. - A series of cleanup patches for the AP bus, this includes the removal of the support for two outdated crypto cards (PCICC and PCICA). - The irq handling / signaling on buffer full in the runtime instrumentation code is dropped. - Some micro optimizations: remove unnecessary memory barriers for a couple of functions: [smb_]rmb, [smb_]wmb, atomics, bitops, and for spin_unlock. Use the builtin bswap if available and make test_and_set_bit_lock more cache friendly. - Statistics and a tracepoint for the diagnose calls to the hypervisor. - The CPU measurement facility support to sample KVM guests is improved. - The vector instructions are now always enabled for user space processes if the hardware has the vector facility. This simplifies the FPU handling code. The fpu-internal.h header is split into fpu internals, api and types just like x86. - Cleanup and improvements for the common I/O layer. - Rework udelay to solve a problem with kprobe. udelay has busy loop semantics but still uses an idle processor state for the wait" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits) s390: remove runtime instrumentation interrupts s390/cio: de-duplicate subchannel validation s390/css: unneeded initialization in for_each_subchannel s390/Kconfig: use builtin bswap s390/dasd: fix disconnected device with valid path mask s390/dasd: fix invalid PAV assignment after suspend/resume s390/dasd: fix double free in dasd_eckd_read_conf s390/kernel: fix ptrace peek/poke for floating point registers s390/cio: move ccw_device_stlck functions s390/cio: move ccw_device_call_handler s390/topology: reduce per_cpu() invocations s390/nmi: reduce size of percpu variable s390/nmi: fix terminology s390/nmi: remove casts s390/nmi: remove pointless error strings s390: don't store registers on disabled wait anymore s390: get rid of __set_psw_mask() s390/fpu: split fpu-internal.h into fpu internals, api, and type headers s390/dasd: fix list_del corruption after lcu changes s390/spinlock: remove unneeded serializations at unlock ...
2015-11-03s390/cio: de-duplicate subchannel validationPierre Morel
cio_validate_io_subchannel() and cio_validate_msg_subchannel() are identical, as the called functions already take care about the differences between subchannel types. Just inline the code into the only user, cio_validate_subchannel(), instead. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-03s390/css: unneeded initialization in for_each_subchannelPierre Morel
The ret variable is always set by the fn function. There is no need to initialize it. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-03s390/dasd: fix disconnected device with valid path maskStefan Haberland
Path verification is either done via dasd_eckd_read_conf() which is triggered during online processing and resume or via do_path_verification_work() which is triggered after path events. The dasd_eckd_read_conf() version added paths unconditionally and did not check if the path mask was empty. This led to devices having the disconnected stop flag set but a valid path mask. So they where not working although they had paths validated successfully. After a resume this state could even not be solved with additional paths added. Fix by checking for an empty path mask in dasd_eckd_read_conf() and clearing the device stop bits for a newly added channel path. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-03s390/dasd: fix invalid PAV assignment after suspend/resumeStefan Haberland
For a valid PAV assignment the DASD driver needs to notice possibly changed configuration data. Thus the failing of read configuration data should also fail the device restore to prevent invalid PAV assignment. The failed device may get restored after additional paths get available later on. If the restore fails after the device was added to the lcu alias handling it needs to be removed from the alias handling before exiting the restore function. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-03s390/dasd: fix double free in dasd_eckd_read_confStefan Haberland
The configuration data is stored per path and also the first valid configuration data per device. When dasd_eckd_read_conf is called again after a path got lost the device configuration data is cleared but possibly not the per path configuration data. This might lead to a double free when the lost path gets operational again. Fix by clearing all per path configuration data when the first valid configuration data is received and stored. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-27s390/cio: move ccw_device_stlck functionsSebastian Ott
device_ops.c should only contain functions that are called by ccw device drivers. Move the cio internal functions that handle unconditional reserve + release to device_pgid.c Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-22 07:55:10 +0000