summaryrefslogtreecommitdiff
path: root/drivers/scsi/aacraid
AgeCommit message (Collapse)Author
2012-07-20[SCSI] aacraid: Series 7 Async. (performance) mode supportMahesh Rajashekhara
- Series 7 Async. (performance) mode support added - New scatter/gather list format for Series 7 - Driver converts s/g list to a firmware suitable list for best performance on Series 7, this can be disabled with driver parameter "aac_convert_sgl" for testing purposes - New container read/write command structure for Series 7 - Fast response support for the SCSI pass-through path added - Async. status response buffer changes Signed-off-by: Mahesh Rajashekhara <Mahesh_Rajashekhara@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] aacraid: Fix endian issues in core and SRC portions of driverBen Collins
This may not fix all endian issues in this driver, but it does get the driver working on PowerPC for a PMC SRC card. So it should at least fix all the problems in the core and in the SRC support. [jejb: fix >> 32 breakage reported by Fengguang Wu] Signed-off-by: Ben Collins <bcollins@ubuntu.com> Acked-by: Achim Leubner <Achim_Leubner@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] aacraid: Relax the tight timeout loop on fib commandsBen Collins
The loop that waited for syncronous fib commands was causing a CPU stall when a timeout actually occured. 1) Switch to using a more accurate timeout mechanism. 2) Do not pace the loop with udelay(). Use cpu_relax() to allow for scheduling to occur. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Acked-by: Achim Leubner <Achim_Leubner@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] aacraid: Better handling of in-flight events on thread stopBen Collins
When an error occured that would shut down the driver, some in-flight events were getting caught up, deadlocking a CPU or two. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Acked-by: Achim Leubner <Achim_Leubner@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] aacraid: Use resource_size_t for IO mem pointers and offsetsBen Collins
This also stops using the "legacy crap" in Scsi_Host (shost->base is an unsigned long). This affected 32-bit systems that have 64-bit resource sizes, causing the IO address to be truncated. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Acked-by: Achim Leubner <Achim_Leubner@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] aacraid: add an iounmap call to aac_src_ioremapTomas Henzl
The patch 116046127d1a3bad2853d02781ad9fee33f05e5a "[SCSI] aacraid: Added Sync.mode to support series 7/8/9 controllers" removed an iounmap call from aac_src_ioremap. Before that, the iounmap has been called twice with the same value (dev->base and dev->regs.src.bar0) and the iounmap complained about it (iounmap: bad address ...). The proper solution is a change the paremeter from bar0 to bar1. Fix this by adding a an iounmap(dev->regs.src.bar1) call. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Achim Leubner <achim_leubner@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] aacraid: Added Sync.mode to support series 7/8/9 controllersMahesh Rajashekhara
Added Sync. mode to support Series 7/8/9 controller families: This is a compatibility mode for all these controller families. The Async. (Performance) mode can be changed in the future. First Async. mode version added for Series 7; Controller parameter aac_sync_mode added Signed-off-by: Mahesh Rajashekhara <aacraid@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-08drivers/scsi/aacraid/commctrl.c: fix mem leak in aac_send_raw_srb()Jesper Juhl
We leak in drivers/scsi/aacraid/commctrl.c::aac_send_raw_srb() : We allocate memory: ... struct user_sgmap* usg; usg = kmalloc(actual_fibsize - sizeof(struct aac_srb) + sizeof(struct sgmap), GFP_KERNEL); and then neglect to free it: ... for (i = 0; i < usg->count; i++) { u64 addr; void* p; if (usg->sg[i].count > ((dev->adapter_info.options & AAC_OPT_NEW_COMM) ? (dev->scsi_host_ptr->max_sectors << 9) : 65536)) { rcode = -EINVAL; goto cleanup; ... this 'goto' makes 'usg' go out of scope and leak the memory we allocated. Other exits properly kfree(usg), it's just here it is neglected. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-11[SCSI] aacraid: controller hangs if kernel uses non-default ASPM policyVasily Averin
Aacraid controller can hang on some nodes if kernel uses non-default (powersave) ASPM policy. Controller hangs shortly after successful load and hardware detection. Scsi error handler detects this hang and tries to restart hardware but it does not help. Initially it was noticed on RHEL6-based openVZ kernel after backporting aacraid driver from mainline (RHEL6 kernel with original driver works well) http://bugzilla.openvz.org/show_bug.cgi?id=2043 This issue happens because default ASPM policy was changed in Red Hat kernels. Therefore guys from Red Hat have noticed this problem long time ago: on Fedora 12 https://bugzilla.redhat.com/show_bug.cgi?id=540478 on Fedora 14 https://bugzilla.redhat.com/show_bug.cgi?id=679385 In RHEL6 kernel this issue was fixed, ASPM was disabled in aacraid driver. In kernel changelog I've found that seems it was done by Matthew Garrett: - [scsi] aacraid: Disable ASPM by default (Matthew Garrett) [599735] However seems this patch was not submitted to mainline. I've reproduced this issue on vanilla 3.1.0 kernel booted with "pcie_aspm.policy=powersave" option, So I believe it makes sense to do it now. Signed-off-by: Vasily Averin <vvs@sw.ru> [mjg: Checking the Windows drivers indicates that they disable ASPM under all circumstances, so:] Acked-by: Matthew Garrett <mjg@redhat.com> Acked-by: Achim Leubner <Achim_Leubner@pmc-sierra.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-31scsi: Fix up files implicitly depending on module.h inclusionPaul Gortmaker
The module.h header was implicitly present everywhere, so files with no explicit include of the module infrastructure would build anyway. We are now removing the implicit include, and so we need to call out the module.h file that we need explicitly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits) [SCSI] qla4xxx: export address/port of connection (fix udev disk names) [SCSI] ipr: Fix BUG on adapter dump timeout [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer [SCSI] hpsa: change confusing message to be more clear [SCSI] iscsi class: fix vlan configuration [SCSI] qla4xxx: fix data alignment and use nl helpers [SCSI] iscsi class: fix link local mispelling [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA [SCSI] aacraid: use lower snprintf() limit [SCSI] lpfc 8.3.27: Change driver version to 8.3.27 [SCSI] lpfc 8.3.27: T10 additions for SLI4 [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes [SCSI] megaraid_sas: Changelog and version update [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts ...
2011-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits) MAINTAINERS: linux-m32r is moderated for non-subscribers linux@lists.openrisc.net is moderated for non-subscribers Drop default from "DM365 codec select" choice parisc: Kconfig: cleanup Kernel page size default Kconfig: remove redundant CONFIG_ prefix on two symbols cris: remove arch/cris/arch-v32/lib/nand_init.S microblaze: add missing CONFIG_ prefixes h8300: drop puzzling Kconfig dependencies MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers tty: drop superfluous dependency in Kconfig ARM: mxc: fix Kconfig typo 'i.MX51' Fix file references in Kconfig files aic7xxx: fix Kconfig references to READMEs Fix file references in drivers/ide/ thinkpad_acpi: Fix printk typo 'bluestooth' bcmring: drop commented out line in Kconfig btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888' doc: raw1394: Trivial typo fix CIFS: Don't free volume_info->UNC until we are entirely done with it. treewide: Correct spelling of successfully in comments ...
2011-10-20[SCSI] aacraid: use lower snprintf() limitDan Carpenter
This is just a cleanup, to silence static checker warnings. It doesn't change how the code works. buf[] can either be BUF_SIZE if this is called from sysfs, or it can be 16 if it's called from aac_get_adapter_info() via aac_get_serial_number(). We use the smaller limit here. sizeof(dev->supplement_adapter_info.MfgPcbaSerialNo) is 12 so there is actually no chance of hitting either limit. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Achim Leubner <Achim_Leubner@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-09-22[SCSI] aacraid: reset should disable MSI interruptVasily Averin
scsi reset on hardware with enabled MSI interrupts generates WARNING message [11027.798722] aacraid: Host adapter abort request (0,0,0,0) [11027.798814] aacraid: Host adapter reset request. SCSI hang ? [11087.762237] aacraid: SCSI bus appears hung [11135.082543] ------------[ cut here ]------------ [11135.082646] WARNING: at drivers/pci/msi.c:658 pci_enable_msi_block+0x251/0x290() Signed-off-by: Vasily Averin <vvs@sw.ru> Acked-by: Mark Salyzyn <mark_salyzyn@us.xyratex.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-09-15Remove unneeded version.h includes from drivers/scsi/Jesper Juhl
It was pointed out by 'make versioncheck' that some includes of linux/version.h are not needed in drivers/scsi/. This patch removes them. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-26Merge branch 'trivial' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: gfs2: Drop __TIME__ usage isdn/diva: Drop __TIME__ usage atm: Drop __TIME__ usage dlm: Drop __TIME__ usage wan/pc300: Drop __TIME__ usage parport: Drop __TIME__ usage hdlcdrv: Drop __TIME__ usage baycom: Drop __TIME__ usage pmcraid: Drop __DATE__ usage edac: Drop __DATE__ usage rio: Drop __DATE__ usage scsi/wd33c93: Drop __TIME__ usage scsi/in2000: Drop __TIME__ usage aacraid: Drop __TIME__ usage media/cx231xx: Drop __TIME__ usage media/radio-maxiradio: Drop __TIME__ usage nozomi: Drop __TIME__ usage cyclades: Drop __TIME__ usage
2011-04-19aacraid: Drop __TIME__ usageMichal Marek
The kernel already prints its build timestamp during boot, no need to repeat it in random drivers and produce different object files each time. Cc: Adaptec OEM Raid Solutions <aacraid@adaptec.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-23[SCSI] aacraid: Add new code for PMC-Sierra's SRC based controller familyMahesh Rajashekhara
Added new hardware device 0x28b interface for PMC-Sierra's SRC based controller family. - new src.c file for 0x28b specific functions - new XPORT header required - sync. command interface: doorbell bits shifted (SRC_ODR_SHIFT, SRC_IDR_SHIFT) - async. Interface: different inbound queue handling, no outbound I2O queue available, using doorbell ("PmDoorBellResponseSent") and response buffer on the host ("host_rrq") for status - changed AIF (adapter initiated FIBs) interface: "DoorBellAifPending" bit to inform about pending AIF, "AifRequest" command to read AIF, "NoMoreAifDataAvailable" to mark the end of the AIFs Signed-off-by: Mahesh Rajashekhara <aacraid@pmc-sierra.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-17scsi: change to new flag variablematt mooney
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-11-16SCSI host lock push-downJeff Garzik
Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-24Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (84 commits) [SCSI] be2iscsi: SGE Len == 64K [SCSI] be2iscsi: Remove premature free of cid [SCSI] be2iscsi: More time for FW [SCSI] libsas: fix bug for vacant phy [SCSI] sd: Fix overflow with big physical blocks [SCSI] st: add MTWEOFI to write filemarks without flushing drive buffer [SCSI] libsas: Don't issue commands to devices that have been hot-removed [SCSI] megaraid_sas: Add Online Controller Reset to MegaRAID SAS drive [SCSI] lpfc 8.3.17: Update lpfc driver version to 8.3.17 [SCSI] lpfc 8.3.17: Replace function reset methodology [SCSI] lpfc 8.3.17: SCSI fixes [SCSI] lpfc 8.3.17: BSG fixes [SCSI] lpfc 8.3.17: SLI Additions and Fixes [SCSI] lpfc 8.3.17: Code Cleanup and Locking fixes [SCSI] zfcp: Remove scsi_cmnd->serial_number from debug traces [SCSI] ipr: fix array error logging [SCSI] aha152x: enable PCMCIA on 64bit [SCSI] scsi_dh_alua: Handle all states correctly [SCSI] cxgb4i: connection and ddp setting update [SCSI] cxgb3i: fixed connection over vlan ...
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-15llseek: automatically add .llseek fopArnd Bergmann
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-09-23drivers/scsi: Remove unnecessary casts of private_dataJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-16[SCSI] aacraid: semaphore cleanupThomas Gleixner
Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: aacraid@adaptec.com Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-15scsi: autoconvert trivial BKL users to private mutexArnd Bergmann
All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-scsi@vger.kernel.org Cc: "James E.J. Bottomley" <James.Bottomley@suse.de>
2010-08-11drivers: scsi: use newly introduced hex_to_bin() methodAndy Shevchenko
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Cc: Adaptec OEM Raid Solutions <aacraid@adaptec.com> Cc: "James E.J. Bottomley" <James.Bottomley@suse.de> Cc: James Smart <james.smart@emulex.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-28[SCSI] aacraid: Do not set DMA mask to 32 bit first if adapter only supports 31Rolf Eike Beer
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Acked-by: Achim Leubner <Achim_Leubner@pmc-sierra.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: [SCSI] fix race in scsi_target_reap [SCSI] aacraid: Eliminate use after free [SCSI] arcmsr: Support HW reset for EH and polling scheme for scsi device [SCSI] bfa: fix system crash when reading sysfs fc_host statistics [SCSI] iscsi_tcp: remove sk_sleep check [SCSI] ipr: improve interrupt service routine performance [SCSI] ipr: set the data list length in the request control block [SCSI] ipr: fix a register read to use the correct address for 64 bit adapters [SCSI] ipr: include the resource path in the IOA status area structure [SCSI] ipr: implement fixes for 64 bit adapter support [SCSI] be2iscsi: correct return value in mgmt_invalidate_icds()
2010-05-25[SCSI] aacraid: Eliminate use after freeJulia Lawall
The debugging code using the freed structure is moved before the kfree. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @free@ expression E; position p; @@ kfree@p(E) @@ expression free.E, subE<=free.E, E1; position free.p; @@ kfree@p(E) ... ( subE = E1 | * E ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-24Merge branch 'bkl/ioctl' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: uml: Pushdown the bkl from harddog_kern ioctl sunrpc: Pushdown the bkl from sunrpc cache ioctl sunrpc: Pushdown the bkl from ioctl autofs4: Pushdown the bkl from ioctl uml: Convert to unlocked_ioctls to remove implicit BKL ncpfs: BKL ioctl pushdown coda: Clean-up whitespace problems in pioctl.c coda: BKL ioctl pushdown drivers: Push down BKL into various drivers isdn: Push down BKL into ioctl functions scsi: Push down BKL into ioctl functions dvb: Push down BKL into ioctl functions smbfs: Push down BKL into ioctl function coda/psdev: Remove BKL from ioctl function um/mmapper: Remove BKL usage sn_hwperf: Kill BKL usage hfsplus: Push down BKL into ioctl function
2010-05-17scsi: Push down BKL into ioctl functionsArnd Bergmann
Push down the bkl into ioctl functions on the scsi layer. [jkacur: Forward declaration missing ';'. Conflicting declaraction in megaraid.h changed Fixed missing inodes declarations] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Kacur <jkacur@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-16[SCSI] aacraid: add an ifdef'd device delete case instead of taking the ↵Rajashekhara, Mahesh
device offline Problem description: -------------------- The problem reported by one of the customer was when a logical array is deleted(from the SDK, from the GUI, from arcconf) then the corresponding physical device (/dev/sdb, for example) is not removed from the Linux namespace. So you end up with a "dead" device entry. And some of the linux tools go slightly wonky. Solution: --------- Based on the notification from FW, the driver calls "scsi_remove_device" for the DELETED drive. This call not only informs the scsi device status to the SCSI mid layer and also it will remove corresponding scsi device entries from the Linux sysfs. Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] aacraid: prohibit access to array container spaceRajashekhara, Mahesh
Problem description: -------------------- The issue reported by one of the customer was able to read LBA beyond the array reported size with "sg_read" utility. If N is the last block address reported, then should not be able to read past N, i.e. N+1. But in their case, reported last LBA=143134719. So should not have been able to read with LBA=143134720, but it is read without failure, which means reported size to the OS is not correct and is less than the actual last block address. Solution: --------- Firmware layer exposes lesser container capacity than the actual one. It exposes [Actual size - Spitfire space(10MB)] to the OS, IO's to the 10MB should be prohibited from the Linux driver. Driver checks LBA boundary, if its greater than the array reported size then sets sensekey to HARDWARE_ERROR and sends the notification to the MID layer. Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] aacraid: add support for handling ATA pass-through commands.Rajashekhara, Mahesh
There are two conditions for ATA pass thru command that falls into 'SRB_STATUS_ERROR' condition. 1. When the "CC" bit is set by the host in ATA pass-through CDB - Even for the successful completion, SCSI target shall generate check condition. - Driver returns a result code of SAM_STAT_CHECK_CONDITION, with a driver byte of DID_OK to the mid layer. Below is the snippet of existing code which fills a result code of SAM_STAT_CHECK_CONDITION: *********************************** if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) { int len; scsicmd->result |= SAM_STAT_CHECK_CONDITION; .......... ************************************ 2. When the "CC" bit is reset by the host and if SCSI target generates a check condition when an error occurs. - Driver returns a result code of SAM_STAT_CHECK_CONDITION, with a driver byte of DID_ERROR to the mid layer. Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] aacraid: expose physical devices for models with newer firmwareRajashekhara, Mahesh
The default driver setting is "expose_physicals=0", which means raw physical drives are not exposed to OS. If the user wants to expose connected physical drives, enable "expose_physicals" module parameter. With the new JBOD firmware, physical drives are not available for "expose_physicals>0". In function "aac_expose_phy_device", modified to reset the appropriate bit in the first byte of inquiry data. This fix exposes the connected physical drives. Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] aacraid: respond automatically to volumes added by config toolRajashekhara, Mahesh
Problem description: -------------------- When the JBOD is created from the OS using Adaptec Storage Manager utility device is not available under FDISK until a system restart is done. Solution: --------- AIF handling: If there is a JBOD drive added to the system, identify the old one with scsi_device_lookup() and remove it to enable a fresh scsi_add_device(); else the new JBOD is not available until reboot. Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-01-17[SCSI] aacraid: fix File System going into read-only modePenchala Narasimha Reddy Chilakala, ERS-HCLTech
These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-04[SCSI] modify change_queue_depth to take in reason why it is being calledMike Christie
This patch modifies scsi_host_template->change_queue_depth so that it takes an argument indicating why it is being called. This will be used so that if a LLD needs to do some extra processing when handling queue fulls or later ramp ups, it can do so. This is a simple port of the drivers setting a change_queue_depth callback. In the patch I just have these LLDs adjust the queue depth if the user was requesting it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> [Vasu.Dev: v2 Also converted pmcraid_change_queue_depth and then verified all modules compile using "make allmodconfig" for any new build warnings on X86_64. Updated original description after combing two original patches from Mike to make this patch git bisectable.] Signed-off-by: Vasu Dev <vasu.dev@intel.com> [jejb: fixed up 53c700] Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-04-13Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)Yang Hongyang
This is the second go through of the old DMA_nBIT_MASK macro,and there're not so many of them left,so I put them into one patch.I hope this is the last round. After this the definition of the old DMA_nBIT_MASK macro could be removed. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Greg KH <greg@kroah.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31)Yang Hongyang
Replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>