summaryrefslogtreecommitdiff
path: root/drivers/scsi/lpfc
AgeCommit message (Collapse)Author
2010-05-21sysfs: add struct file* to bin_attr callbacksChris Wright
This allows bin_attr->read,write,mmap callbacks to check file specific data (such as inode owner) as part of any privilege validation. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: Update Driver version to 8.3.12James Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: Fix discovery issuesJames Smart
- Add code to prevent unreg_vpi mailbox command from failing. - Add code to reset the HBA if unreg_vpi mailbox fails with busy status. - Remove code that was clearing the nlp_type stored during rport discovery. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: BSG Fixes and enhancementsJames Smart
- Add memcpy to mailbox completion to transfer reply correctly. - Add support for BSG mailbox commands (dump, update_cfg, and event_log_status). - Add warning message and refuse mailbox command while mgmt is blocked. - Add checks for memory allocation failure. - Add check for sli4 dump zero BDE size. - Only copy data if mailbox commands succeed. - Add support for Read Event Log mailbox command. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: Critical fixesJames Smart
- Move the code to increase the sg seg count for LP21000 adapters. - Check pcmd on command completion before dereferencing it. - Clear queue memory when creating firmware queues to prevent stale entries. - Replace the use of PAGE_SIZE in many areas that assumed it was always 4k. - Add an else clause to a conditional that needed to unlock the hba_lock. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: T10-PI/DIF changesJames Smart
Update driver for change in T10-PI interface on adapter - Remove Profiles. - Add new SLI Opcodes. - Add new PDE structures used for BlockGuard. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: Miscellaneous ChangesJames Smart
- Prevent log message 1801 during vport delete. - Enable NPIV by default. - Display correct value for max Vports on SLI4 HBAs. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: Emulex SLI enhancementsJames Smart
- Add the new Logical Link speed event support. - Add RATOV and EDTOV to the REG_VFI mailbox command. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.11: Update Driver version to 8.3.11James Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.11: NPIV changesJames Smart
- Enable NPIV by default. - Added code to handle unsolicited LOGO on physical port. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.11: Fix AER uncorrectable non-fatal error handlingJames Smart
Only abort outstanding I/O to force the OS to retry failed I/Os for AER uncorrectable non-fatal errors instead of reseting the adapter. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.11: Driver management improvements via BSGJames Smart
- Add BSG support for PCI loopback testing. - Add BSG support for extended mailbox commands. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.11: SLI4 ImprovementsJames Smart
- Correct all SLI4 code to work on big endian systems. - Move read of sli4 params earlier so returned values are used correctly. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.11: FCF failover improvementsJames Smart
FCF failover improvements - Add random FCF failover when there are multiple FCFs available. - Prevent FCF log messages from being displayed for FC adapters. - Separate the New FCF and Modified FCF log messages. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-08[SCSI] lpfc: fix lock imbalancesJiri Slaby
Stanse found that two error paths in lpfc_bsg_rport_els_cmp and lpfc_issue_ct_rsp_cmp omits to unlock phba->ct_ev_lock. It is because they wrongly unlock phba->hbalock instead. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (69 commits) [SCSI] scsi_transport_fc: Fix synchronization issue while deleting vport [SCSI] bfa: Update the driver version to 2.1.2.1. [SCSI] bfa: Remove unused header files and did some cleanup. [SCSI] bfa: Handle SCSI IO underrun case. [SCSI] bfa: FCS and include file changes. [SCSI] bfa: Modified the portstats get/clear logic [SCSI] bfa: Replace bfa_get_attr() with specific APIs [SCSI] bfa: New portlog entries for events (FIP/FLOGI/FDISC/LOGO). [SCSI] bfa: Rename pport to fcport in BFA FCS. [SCSI] bfa: IOC fixes, check for IOC down condition. [SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are in FW mismatch state. [SCSI] bfa: Fix Command Queue (CPE) full condition check and ack CPE interrupt. [SCSI] bfa: IOC recovery fix in fcmode. [SCSI] bfa: AEN and byte alignment fixes. [SCSI] bfa: Introduce a link notification state machine. [SCSI] bfa: Added firmware save clear feature for BFA driver. [SCSI] bfa: FCS authentication related changes. [SCSI] bfa: PCI VPD, FIP and include file changes. [SCSI] bfa: Fix to copy fpma MAC when requested by user space application. [SCSI] bfa: RPORT state machine: direct attach mode fix. ...
2010-03-08Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
2010-03-03[SCSI] lpfc 8.3.10: Update Driver version to 8.3.10James Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03[SCSI] lpfc 8.3.10: Added round robin FCF failoverJames Smart
- Added round robin FCF failover on initial or FCF rediscovery FLOGI failure. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03[SCSI] lpfc 8.3.10: Fix Discovery issuesJames Smart
- Prevent Vport discovery after reg_new_vport completes when physical logged in using FDISC. - Remove fast FCF failover fabric name matching. Allow failover to FCFs connected to different fabrics. - Added fast FCF failover in response to FCF DEAD event on current FCF record. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03[SCSI] lpfc 8.3.10: Added management for LP21000 through BSG.James Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03[SCSI] lpfc 8.3.10: Update SLI interface areasJames Smart
- Clear LPFC_DRIVER_ABORTED on FCP command completion. - Clear exchange busy flag when I/O is aborted and found on aborted list. - Free sglq when XRI_ABORTED event is processed before release of IOCB. - Only process iocb as aborted when LPFC_DRIVER_ABORTED is set. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03[SCSI] lpfc 8.3.10: Fix user interface issuesJames Smart
- Add Logging message for critial errors. - Remove unused variable from lpfc_nodev_tmo_show - Update supress_link_up parameter with #define values. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03[SCSI] lpfc 8.3.10: Fix Initialization issuesJames Smart
- Add NULL checks to the pointers for the config_async mailbox and dump_wakeup_params mailbox. - Add code to check return value of lpfc_read_sparams everywhere and handle failures appropriately. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-18[SCSI] lpfc: correct PPC build failureJames Smart
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] lpfc 8.3.9: Update Driver version to 8.3.9James Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] lpfc 8.3.9: Fix locking and memory issuesJames Smart
- Use the hbalock when changing the fc_flag. - Use the host_lock when changeing the sli_flag. - Prevent NULL pointer dereference after dma_alloc_coherent failure. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] lpfc 8.3.9: Changes to sysfs interface for the lpfc driver.James Smart
- Convert all sysfs parameters to uint instead of int. - Add lpfc_supress_link_up parameter. - Change link_state to writable sysfs parameter. - Add support to be able to "up" or "down" link from link_state parameter. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] lpfc 8.3.9: SLI enhancments to support new hardware.James Smart
- Add support for the INTF (Interface) PCI register. - Add support for greater than 2 page SGLs. - Add support for up to 32 bit BDE lengths. - Implement the Port Capabilities Mailbox command. - Stop checking the Minor Code in the EQE structure. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] lpfc 8.3.9: Discovery changes to the lpfc driver.James Smart
- Add init_vpi mailbox command before re-registering VPI. - Add Fast FCF failover support. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] lpfc 8.3.9: PCI Changes to lpfc driverJames Smart
- Call pci_save_state() after pci_restore_state() call to cope with kernel change. - Add support for PCI BAR region 0 if BAR0 is a 64 bit register. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-09tree-wide: Assorted spelling fixesDaniel Mack
In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-08[SCSI] lpfc 8.3.8: Update Driver version to 8.3.8James Smart
Update Driver version to 8.3.8 Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: (BSG4) Add new vendor specific BSG CommandsJames Smart
Add the following new vendor specific BSG commands. - Add LPFC_BSG_VENDOR_GET_MGMT_REV command - Add LPFC_BSG_VENDOR_MBOX command - Add LPFC_BSG_VENDOR_DIAG_MODE command - Add LPFC_BSG_VENDOR_DIAG_TEST command Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: (BSG3) Modify BSG commands to operate asynchronouslyJames Smart
Modify the following BSG commands to operate asynchronously. - FC_BSG_RPT_ELS - FC_BSG_RPT_CT - LPFC_BSG_VENDOR_GET_CT_EVENT - LPFC_BSG_VENDOR_SET_CT_EVENT Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: (BSG2) Create lpfc_bsg.hJames Smart
Create lpfc_bsg.h - structures, etc used by bsg-related routines. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: (BSG1) Update BSG infrastructureJames Smart
Update BSG infrastructure to handle new vendor specific BSG commands. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: Add code to display logical link speedJames Smart
Display Logical Link Speed when supported and is non-zero. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: BugFixes: Discovery relates changesJames Smart
Discovery relates changes: - Separated VPI_REGISTERED state of physical port into VFI_REGISTERED and VPI_REGISTERED state so that driver can unregister physical port VPI independent of VFI. - Add code to unregister, re-init and re-register physical port VPI when physical port NportID change. - Add code to unregister and re-register VPI of a vport when its Nport ID change. - Add code in FDISC completion path to re-start FLOGI discovery when a FDISC complete with LOGIN_REQUIRED reason code. - Fix a memory leak in lpfc_init_vpi_cmpl - Add code to start a timer for vport to retry FDISC when CVL is received by a vport or physical port. If all Nports receive CVLs, then all timers are cancelled and a logical link level discovery will be started after one second. - Flush ELS commands after killing all delayed ELS commands. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc 8.3.8: BugFixes: SLI relates changesJames Smart
Fix hardware/SLI relates issues: - Handle XB bit so that ELS XRIs are not prematurely released. - Handle XB bit so that FCP XRIs are not prematurely released. - Define new security SLI Commands. - Remove unused security SLI commands - Skip receive data size parameter check on received FLOGI. - Added LPFC_USE_FCPWQIDX flag to iocb to force SLI layer to submit abort WQE on same WQ as the command WQE. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] lpfc: unify two if branches with the same code in ↵Roel Kluin
lpfc_decode_firmware_rev() Regardless of the flag state, the branches execute the same code Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-05Fix misspelling of "should" and "shouldn't" in comments.Adam Buchbinder
Some comments misspell "should" or "shouldn't"; this fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-18[SCSI] lpfc: restore MSI-X/MSI supportGeorge Kadianakis
A Gentoo bug report [1] showed that as of 2.6.31 lpfc only uses INTx interrupts. This patch restores lpfc's ability to support MSI-X/MSI interrupts that the "Addition of SLI4 Interface - Base Support" patch [2] broke. It reestablishes MSI-X as the default interrupt method and in case MSI-X is not supported lpfc_sli{4,}_enable_intr fallbacks to MSI and then to INTx. [1]: http://bugs.gentoo.org/show_bug.cgi?id=296319 [2]: commit da0436e915a5c17ee79e72c1bf978a4ebb1cbf4d [James Smart: Background: Nothing Broke. This was intended. We had originally enabled MSI-X by default, but in qualification within the last 12 months, we encountered a major catch-22: There were at least 4 platforms, from 2 major OEMs, that : - Say they support MSI-X - platform routines work and act as if they do. - We enable it, generate a test interrupt to check they really do deliver it, and it works. - But shortly after attachment, the system hangs or loses interrupts, resulting in a bad system behavior. Given the distro's picking up the 2.6.32 kernel, we had to stick with a default of MSI-X off, with user-enabled MSI-X as these platforms couldn't get fixed. However, we're also now encountering platforms that require MSI-X and never INTx, so we must change. It's desired also for also for performance reasons. So - now (2.6.33) is the right time to re-enable MSI-X by default. ] [jejb: fix up comment on default values] Signed-off-by: George Kadianakis <desnacked@gmail.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17[SCSI] lpfc: fix file permissionsJames Bottomley
lpfc_hbadisc.c and lpfc_hw4.h accidentally got set executable. Reported-by: Thomas Backlund <tmb@mandriva.org> Cc: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-04[SCSI] lpfc 8.3.7: Update Driver version to 8.3.7James Smart
Update Driver version to 8.3.7 Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-04[SCSI] lpfc 8.3.7: Fix discovery failures.James Smart
Fix discovery failures: - Move all accesses to the fc_flag field inside the host lock. - Restore link state after going through linkdown processing for FCF DEAD event. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-04[SCSI] lpfc 8.3.7: Fix SCSI protocol related errors.James Smart
Fix SCSI protocol related errors: - Avoid I/O failures during EEH and HBA/CNA reset by correcting when we block the targets on the adapter. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-04[SCSI] lpfc 8.3.7: Fix hardware/SLI relates issuesJames Smart
Fix hardware/SLI relates issues: - Fix CNA uses more than one EQ when in INTx interrupt mode. - Fix driver tries to process failed read FCF record mailbox request. - Fix allocating single receive buffer breaks FCoE receive queue. - Support new read FCF record mailbox error case. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-04[SCSI] lpfc 8.3.7: Fix NPIV operation errorsJames Smart
Fix NPIV operation errors: - Fix vport not logging out of fabric when being deleted - Fix vport fails to discover targets after devloss timeout. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-31 01:31:02 +0000